Change the ref-filter sorting of detached HEAD to check the
FILTER_REFS_DETACHED_HEAD flag, instead of relying on the ref
description filled-in by get_head_description() to start with "(",
which in turn we expect to ASCII-sort before any other reference.
For context, we'd like the detached line to appear first at the start
of "git branch -l", e.g.:
$ git branch -l
* (HEAD detached at <hash>)
master
This doesn't change that, but improves on a fix made in
28438e84e0 (ref-filter: sort detached HEAD lines firstly, 2019-06-18)
and gives the Chinese translation the ability to use its preferred
punctuation marks again.
In Chinese the fullwidth versions of punctuation like "()" are
typically written as (U+FF08 fullwidth left parenthesis), (U+FF09
fullwidth right parenthesis) instead[1]. This form is used in both
po/zh_{CN,TW}.po in most cases where "()" is translated in a string.
Aside from that improvement to the Chinese translation, it also just
makes for cleaner code that we mark any special cases in the ref_array
we're sorting with flags and make the sort function aware of them,
instead of piggy-backing on the general-case of strcmp() doing the
right thing.
As seen in the amended tests this made reverse sorting a bit more
consistent. Before this we'd sometimes sort this message in the
middle, now it's consistently at the beginning or end, depending on
whether we're doing a normal or reverse sort. Having it at the end
doesn't make much sense either, but at least it behaves consistently
now. A follow-up commit will make this behavior under reverse sorting
even better.
I'm removing the "TRANSLATORS" comments that were in the old code
while I'm at it. Those were added in d4919bb288 (ref-filter: move
get_head_description() from branch.c, 2017-01-10). I think it's
obvious from context, string and translation memory in typical
translation tools that these are the same or similar string.
1. https://en.wikipedia.org/wiki/Chinese_punctuation#Marks_similar_to_European_punctuation
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the reverse/ignore_case/version sort flags in the ref_sorting
struct into a bitfield. Having three of them was already a bit
unwieldy, but it would be even more so if another flag needed a
function like ref_sorting_icase_all() introduced in
76f9e569ad (ref-filter: apply --ignore-case to all sorting keys,
2020-05-03).
A follow-up change will introduce such a flag, so let's move this over
to a bitfield. Instead of using the usual '#define' pattern I'm using
the "enum" pattern from builtin/rebase.c's b4c8eb024a (builtin
rebase: support --quiet, 2018-09-04).
Perhaps there's a more idiomatic way of doing the "for each in list
amend mask" pattern than this "mask/on" variable combo. This function
doesn't allow us to e.g. do any arbitrary changes to the bitfield for
multiple flags, but I think in this case that's fine. The common case
is that we're calling this with a list of one.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal reachable-filter API is a bit loose and imprecise; it
also bleeds unnecessarily into the public header. Tighten the API
by:
* renaming do_merge_filter() to reach_filter()
* separating parameters to explicitly identify what data is used
by the function instead of passing an entire ref_filter_cbdata
struct
* renaming and moving internal constants from header to source
file
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable ref-filter to process multiple merged and no-merged filters, and
extend functionality to git branch, git tag and git for-each-ref. This
provides an easy way to check for branches that are "graduation
candidates:"
$ git branch --no-merged master --merged next
If passed more than one merged (or more than one no-merged) filter, refs
must be reachable from any one of the merged commits, and reachable from
none of the no-merged commits.
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch" and other "for-each-ref" variants accepted multiple
--sort=<key> options in the increasing order of precedence, but it
had a few breakages around "--ignore-case" handling, and tie-breaking
with the refname, which have been fixed.
* jk/for-each-ref-multi-key-sort-fix:
ref-filter: apply fallback refname sort only after all user sorts
ref-filter: apply --ignore-case to all sorting keys
All of the ref-filter users (for-each-ref, branch, and tag) take an
--ignore-case option which makes filtering and sorting case-insensitive.
However, this option was applied only to the first element of the
ref_sorting list. So:
git for-each-ref --ignore-case --sort=refname
would do what you expect, but:
git for-each-ref --ignore-case --sort=refname --sort=taggername
would sort the primary key (taggername) case-insensitively, but sort the
refname case-sensitively. We have two options here:
- teach callers to set ignore_case on the whole list
- replace the ref_sorting list with a struct that contains both the
list of sorting keys, as well as options that apply to _all_
keys
I went with the first one here, as it gives more flexibility if we later
want to let the users set the flag per-key (presumably through some
special syntax when defining the key; for now it's all or nothing
through --ignore-case).
The new test covers this by sorting on both tagger and subject
case-insensitively, which should compare "a" and "A" identically, but
still sort them before "b" and "B". We'll break ties by sorting on the
refname to give ourselves a stable output (this is actually supposed to
be done automatically, but there's another bug which will be fixed in
the next commit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We renamed the actual data structure in 910650d2f8 (Rename sha1_array to
oid_array, 2017-03-31), but the file is still called sha1-array. Besides
being slightly confusing, it makes it more annoying to grep for leftover
occurrences of "sha1" in various files, because the header is included
in so many places.
Let's complete the transition by renaming the source and header files
(and fixing up a few comment references).
I kept the "-" in the name, as that seems to be our style; cf.
fc1395f4a4 (sha1_file.c: rename to use dash in file name, 2018-04-10).
We also have oidmap.h and oidset.h without any punctuation, but those
are "struct oidmap" and "struct oidset" in the code. We _could_ make
this "oidarray" to match, but somehow it looks uglier to me because of
the length of "array" (plus it would be a very invasive patch for little
gain).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--sort" parameter of for-each-ref, etc, does not handle negation,
and instead returns an error to the parse-options code. But neither
piece of code prints anything for the user, which may leave them
confused:
$ git for-each-ref --no-sort
$ echo $?
129
As the comment in the callback function notes, this probably should
clear the list, which would make it consistent with other list-like
options (i.e., anything that uses OPT_STRING_LIST currently).
Unfortunately that's a bit tricky due to the way the ref-filter code
works. But in the meantime, let's at least make the error a little less
confusing:
- switch to using PARSE_OPT_NONEG in the option definition, which will
cause the options code to produce a useful message
- since this was cut-and-pasted to four different spots, let's define
a single OPT_REF_SORT() macro that we can use everywhere
- the callback can use BUG_ON_OPT_NEG() to make sure the correct flags
are used (incidentally, this also satisfies -Wunused-parameters,
since we're now looking at "unset")
- expand the comment into a NEEDSWORK to make it clear that the
direction is right, but the details need to be worked out
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code restructuring, in preparation for further work.
* ot/libify-get-ref-atom-value:
ref-filter: libify get_ref_atom_value()
ref-filter: add return value to parsers
ref-filter: change parsing function error handling
ref-filter: add return value && strbuf to handlers
ref-filter: start adding strbufs with errors
ref-filter: add shortcut to work with strbufs
In preparation for callers constructing their own ref_array
structs, let's move our own internal push operation into its
own function.
While we're at it, we can replace REALLOC_ARRAY() with
ALLOC_GROW(), which should give the growth operation
amortized linear complexity (as opposed to growing by one,
which is potentially quadratic, though in-place realloc
growth often makes this faster in practice).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Internally we store a "struct object_id", and all of our
callers have one to pass us. But we insist that they peel it
to its bare-sha1 hash, which we then hashcpy() into place.
Let's pass it around as an object_id, which future-proofs us
for a post-sha1 world.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a first step in removing die() calls from ref-filter
formatting logic, so that it could be used by other commands
that do not want to die during formatting process.
die() calls related to bugs in code will not be touched in this patch.
Everything would be the same for show_ref_array_item() users.
But, if you want to deal with errors by your own, you could invoke
format_ref_array_item(). It means that you need to print everything
(the result and errors) on your side.
This commit changes signature of format_ref_array_item() by adding
return value and strbuf parameter for errors, and adjusts
its callers. While at it, reduce the scope of the out-variable.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When color placeholders like %(color:red) are used in a
ref-filter format, we unconditionally output the colors,
even if the user has asked us for no colors. This usually
isn't a problem when the user is constructing a --format on
the command line, but it means we may do the wrong thing
when the format is fed from a script or alias. For example:
$ git config alias.b 'branch --format=%(color:green)%(refname)'
$ git b --no-color
should probably omit the green color. Likewise, running:
$ git b >branches
should probably also omit the color, just as we would for
all baked-in coloring (and as we recently started to do for
user-specified colors in --pretty formats).
This commit makes both of those cases work by teaching
the ref-filter code to consult want_color() before
outputting any color. The color flag in ref_format defaults
to "-1", which means we'll consult color.ui, which in turn
defaults to the usual isatty() check on stdout. However,
callers like git-branch which support their own color config
(and command-line options) can override that.
The new tests independently cover all three of the callers
of ref-filter (for-each-ref, tag, and branch). Even though
these seem redundant, it confirms that we've correctly
plumbed through all of the necessary config to make colors
work by default.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parse_ref_filter_atom() function really shouldn't be
exposed outside of ref-filter.c; its return value is an
integer index into an array that is private in that file.
Since the previous commit removed the sole external caller
(and replaced it with a public function at a more
appropriately level), we can just make this static.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref-filter module currently provides a callback suitable
for parsing command-line --sort options. But since git-tag
also supports the tag.sort config option, it needs a
function whose implementation is quite similar, but with a
slightly different interface. The end result is that
builtin/tag.c has a copy-paste of parse_opt_ref_sorting().
Instead, let's provide a function to parse an arbitrary
sort string, which we can then trivially wrap to make the
parse_opt variant.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calling verify_ref_format() doesn't just confirm that the
format is sane; it actually sets some global variables that
will be used later when formatting the refs. These logically
should belong to the ref_format, which would make it
possible to use multiple formats within a single program
invocation.
Let's move one such flag into the ref_format struct. There
are still others that would need to be moved before it would
be safe to use multiple formats, but this commit gives a
blueprint for how that should look.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref-filter module provides routines for formatting a ref
for output. The fundamental interface for the format is a
"const char *" containing the format, and any additional
options need to be passed to each invocation of
show_ref_array_item.
Instead, let's make a ref_format struct that holds the
format, along with any associated format options. That will
make some enhancements easier in the future:
1. new formatting options can be added without disrupting
existing callers
2. some state can be carried in the struct rather than as
global variables
For now this just has the text format itself along with the
quote_style option, but we'll add more fields in future patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct ref_array_item to use struct object_id by changing the
definition and applying the following semantic patch, plus the standard
object_id transforms:
@@
struct ref_array_item E1;
@@
- E1.objectname
+ E1.objectname.hash
@@
struct ref_array_item *E1;
@@
- E1->objectname
+ E1->objectname.hash
This transformation allows us to convert get_obj, which is needed to
convert parse_object_buffer.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conversion from unsigned char [40] to struct object_id continues.
* bc/object-id:
Documentation: update and rename api-sha1-array.txt
Rename sha1_array to oid_array
Convert sha1_array_for_each_unique and for_each_abbrev to object_id
Convert sha1_array_lookup to take struct object_id
Convert remaining callers of sha1_array_lookup to object_id
Make sha1_array_append take a struct object_id *
sha1-array: convert internal storage for struct sha1_array to object_id
builtin/pull: convert to struct object_id
submodule: convert check_for_new_submodule_commits to object_id
sha1_name: convert disambiguate_hint_fn to take object_id
sha1_name: convert struct disambiguate_state to object_id
test-sha1-array: convert most code to struct object_id
parse-options-cb: convert sha1_array_append caller to struct object_id
fsck: convert init_skiplist to struct object_id
builtin/receive-pack: convert portions to struct object_id
builtin/pull: convert portions to struct object_id
builtin/diff: convert to struct object_id
Convert GIT_SHA1_RAWSZ used for allocation to GIT_MAX_RAWSZ
Convert GIT_SHA1_HEXSZ used for allocation to GIT_MAX_HEXSZ
Define new hash-size constants for allocating memory
Since this structure handles an array of object IDs, rename it to struct
oid_array. Also rename the accessor functions and the initialization
constant.
This commit was produced mechanically by providing non-Documentation
files to the following Perl one-liners:
perl -pi -E 's/struct sha1_array/struct oid_array/g'
perl -pi -E 's/\bsha1_array_/oid_array_/g'
perl -pi -E 's/SHA1_ARRAY_INIT/OID_ARRAY_INIT/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the tag, branch & for-each-ref commands to have a --no-contains
option in addition to their longstanding --contains options.
This allows for finding the last-good rollout tag given a known-bad
<commit>. Given a hypothetically bad commit cf5c7253e0, the git
version to revert to can be found with this hacky two-liner:
(git tag -l 'v[0-9]*'; git tag -l --contains cf5c7253e0 'v[0-9]*') |
sort | uniq -c | grep -E '^ *1 ' | awk '{print $2}' | tail -n 10
With this new --no-contains option the same can be achieved with:
git tag -l --no-contains cf5c7253e0 'v[0-9]*' | sort | tail -n 10
As the filtering machinery is shared between the tag, branch &
for-each-ref commands, implement this for those commands too. A
practical use for this with "branch" is e.g. finding branches which
were branched off between v2.8.0 and v2.10.0:
git branch --contains v2.8.0 --no-contains v2.10.0
The "describe" command also has a --contains option, but its semantics
are unrelated to what tag/branch/for-each-ref use --contains for. A
--no-contains option for "describe" wouldn't make any sense, other
than being exactly equivalent to not supplying --contains at all,
which would be confusing at best.
Add a --without option to "tag" as an alias for --no-contains, for
consistency with --with and --contains. The --with option is
undocumented, and possibly the only user of it is
Junio (<xmqqefy71iej.fsf@gitster.mtv.corp.google.com>). But it's
trivial to support, so let's do that.
The additions to the the test suite are inverse copies of the
corresponding --contains tests. With this change --no-contains for
tag, branch & for-each-ref is just as well tested as the existing
--contains option.
In addition to those tests, add a test for "tag" which asserts that
--no-contains won't find tree/blob tags, which is slightly
unintuitive, but consistent with how --contains works & is documented.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is an implementation detail of how filter_refs() works,
and does not need to be exposed to the outside world. This
will become more important in future patches as we add new
private data types to it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to list branches in "git branch" has been consolidated
with the more generic ref-filter API.
* kn/ref-filter-branch-list: (21 commits)
ref-filter: resurrect "strip" as a synonym to "lstrip"
branch: implement '--format' option
branch: use ref-filter printing APIs
branch, tag: use porcelain output
ref-filter: allow porcelain to translate messages in the output
ref-filter: add an 'rstrip=<N>' option to atoms which deal with refnames
ref-filter: modify the 'lstrip=<N>' option to work with negative '<N>'
ref-filter: Do not abruptly die when using the 'lstrip=<N>' option
ref-filter: rename the 'strip' option to 'lstrip'
ref-filter: make remote_ref_atom_parser() use refname_atom_parser_internal()
ref-filter: introduce refname_atom_parser()
ref-filter: introduce refname_atom_parser_internal()
ref-filter: make "%(symref)" atom work with the ':short' modifier
ref-filter: add support for %(upstream:track,nobracket)
ref-filter: make %(upstream:track) prints "[gone]" for invalid upstreams
ref-filter: introduce format_ref_array_item()
ref-filter: move get_head_description() from branch.c
ref-filter: modify "%(objectname:short)" to take length
ref-filter: implement %(if:equals=<string>) and %(if:notequals=<string>)
ref-filter: include reference to 'used_atom' within 'atom_value'
...
"git tag" and "git verify-tag" learned to put GPG verification
status in their "--format=<placeholders>" output format.
* st/verify-tag:
t/t7004-tag: Add --format specifier tests
t/t7030-verify-tag: Add --format specifier tests
builtin/tag: add --format argument for tag -v
builtin/verify-tag: add --format to verify-tag
ref-filter: add function to print single ref_array_item
gpg-interface, tag: add GPG_VERIFY_OMIT_STATUS flag
Introduce setup_ref_filter_porcelain_msg() so that the messages used in
the atom %(upstream:track) can be translated if needed. By default, keep
the messages untranslated, which is the right behavior for plumbing
commands. This is needed as we port branch.c to use ref-filter's
printing API's.
Written-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ref-filter functions are useful for printing git object information
using a format specifier. However, some other modules may not want to use
this functionality on a ref-array but only print a single item.
Expose a pretty_print_ref function to create, pretty print and free
individual ref-items.
Signed-off-by: Lukas Puehringer <luk.puehringer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To allow column display, we will need to first render the output in a
string list to allow print_columns() to compute the proper size of
each column before starting the actual output. Introduce the function
format_ref_array_item() that does the formatting of a ref_array_item
to an strbuf.
show_ref_array_item() is kept as a convenience wrapper around it which
obtains the strbuf and prints it the standard output.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the implementation of get_head_description() from branch.c to
ref-filter. This gives a description of the HEAD ref if called. This
is used as the refname for the HEAD ref whenever the
FILTER_REFS_DETACHED_HEAD option is used. Make it public because we
need it to calculate the length of the HEAD refs description in
branch.c:calc_maxwidth() when we port branch.c to use ref-filter
APIs.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This options makes sorting ignore case, which is great when you have
branches named bug-12-do-something, Bug-12-do-some-more and
BUG-12-do-what and want to group them together. Sorting externally may
not be an option because we lose coloring and column layout from
git-branch and git-tag.
The same could be said for filtering, but it's probably less important
because you can always go with the ugly pattern [bB][uU][gG]-* if you're
desperate.
You can't have case-sensitive filtering and case-insensitive sorting (or
the other way around) with this though. For branch and tag, that should
be no problem. for-each-ref, as a plumbing, might want finer control.
But we can always add --{filter,sort}-ignore-case when there is a need
for it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make 'branch.c' use 'ref-filter' APIs for iterating through refs
sorting. This removes most of the code used in 'branch.c' replacing it
with calls to the 'ref-filter' library.
Make 'branch.c' use the 'filter_refs()' function provided by 'ref-filter'
to filter out tags based on the options set.
We provide a sorting option provided for 'branch.c' by using the
sorting options provided by 'ref-filter'. Also by default, we sort by
'refname'. Since 'HEAD' is alphabatically before 'refs/...' we end up
with an array consisting of the 'HEAD' ref then the local branches and
finally the remote-tracking branches.
Also remove the 'ignore' variable from ref_array_item as it was
previously used for the '--merged' option and now that is handled by
ref-filter.
Modify some of the tests in t1430 to check the stderr for a warning
regarding the broken ref. This is done as ref-filter throws a warning
for broken refs rather than directly printing them.
Add tests and documentation for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make 'branch.c' use 'ref-filter' data structures and make changes to
support the new data structures. This is a part of the process of
porting 'branch.c' to use 'ref-filter' APIs.
This is a temporary step before porting 'branch.c' to use 'ref-filter'
completely. As this is a temporary step, most of the code introduced
here will be removed when 'branch.c' is ported over to use
'ref-filter' APIs.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 'ref-filter' only has an option to match path names add an
option for plain fnmatch pattern-matching.
This is to support the pattern matching options which are used in `git
tag -l` and `git branch -l` where we can match patterns like `git tag
-l foo*` which would match all tags which has a "foo*" pattern.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support to sort by version using the "v:refname" and
"version:refname" option. This is achieved by using the 'versioncmp()'
function as the comparing function for qsort.
This option is included to support sorting by versions in `git tag -l`
which will eventually be ported to use ref-filter APIs.
Add documentation and tests for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 'tag.c' we can print N lines from the annotation of the tag using
the '-n<num>' option. Copy code from 'tag.c' to 'ref-filter' and
modify it to support appending of N lines from the annotation of tags
to the given strbuf.
Implement %(contents:lines=X) where X lines of the given object are
obtained.
While we're at it, remove unused "contents:<suboption>" atoms from
the `valid_atom` array.
Add documentation and test for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function called 'for_each_fullref_in()' to refs.{c,h} which
iterates through each ref for the given path without trimming the path
and also accounting for broken refs, if mentioned.
Add 'filter_ref_kind()' in ref-filter.c to check the kind of ref being
handled and return the kind to 'ref_filter_handler()', where we
discard refs which we do not need and assign the kind to needed refs.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since atom_value is only required for the internal working of
ref-filter it doesn't belong in the public header.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'tag -l' and 'branch -l' have two different ways of finding
out if a certain ref contains a commit. Implement both these
methods in ref-filter and give the caller of ref-filter API
the option to pick which implementation to be used.
'branch -l' uses 'is_descendant_of()' from commit.c which is
left as the default implementation to be used.
'tag -l' uses a more specific algorithm since ffc4b80. This
implementation is used whenever the 'with_commit_tag_algo' bit
is set in 'struct ref_filter'.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 'branch -l' we have '--merged' option which only lists refs (branches)
merged into the named commit and '--no-merged' option which only lists
refs (branches) not merged into the named commit. Implement these two
options in ref-filter.{c,h} so that other commands can benefit from this.
Based-on-patch-by: Jeff King <peff@peff.net>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'parse_opt_merge_filter()' to parse '--merged' and '--no-merged'
options and write macros for the same.
This is copied from 'builtin/branch.c' which will eventually be removed
when we port 'branch.c' to use ref-filter APIs.
Based-on-patch-by: Jeff King <peff@peff.net>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 'tag -l' we have '--points-at' option which lets users
list only tags of a given object. Implement this option in
'ref-filter.{c,h}' so that other commands can benefit from this.
This is duplicated from tag.c, we will eventually remove that
when we port tag.c to use ref-filter APIs.
Based-on-patch-by: Jeff King <peff@peff.net>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This would remove the need of using a pointer to store refname.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce filter_refs() which will act as an API for filtering
a set of refs. Based on the type of refs the user has requested,
we iterate through those refs and apply filters as per the
given ref_filter structure and finally store the filtered refs
in the ref_array structure.
Currently this will wrap around ref_filter_handler(). Hence,
ref_filter_handler is made file scope static.
As users of this API will no longer send a ref_filter_cbdata
structure directly, we make the elements of ref_filter_cbdata
pointers. We can now use the information given by the users
to obtain our own ref_filter_cbdata structure. Changes are made to
support the change in ref_filter_cbdata structure.
Make 'for-each-ref' use this API.
Helped-by: Junio C Hamano <gitster@pobox.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is step one of creating a common library for 'for-each-ref',
'branch -l' and 'tag -l'. This creates a header file with the
functions and data structures that ref-filter will provide.
We move the data structures created in for-each-ref to this header
file.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ævar Arnfjörð Bjarmason
Aaron Lipman
Junio C Hamano
Jeff King
Olga Telezhnaya
brian m. carlson
Karthik Nayak
Lukas Puehringer
Nguyễn Thái Ngọc Duy