Граф коммитов

13 Коммитов

Автор SHA1 Сообщение Дата
Brandon Williams b2141fc1d2 config: don't include config.h by default
Stop including config.h by default in cache.h.  Instead only include
config.h in those files which require use of the config system.

Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-15 12:56:22 -07:00
Jeff King 3733e69464 use xmallocz to avoid size arithmetic
We frequently allocate strings as xmalloc(len + 1), where
the extra 1 is for the NUL terminator. This can be done more
simply with xmallocz, which also checks for integer
overflow.

There's no case where switching xmalloc(n+1) to xmallocz(n)
is wrong; the result is the same length, and malloc made no
guarantees about what was in the buffer anyway. But in some
cases, we can stop manually placing NUL at the end of the
allocated buffer. But that's only safe if it's clear that
the contents will always fill the buffer.

In each case where this patch does so, I manually examined
the control flow, and I tried to err on the side of caution.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-22 14:51:09 -08:00
Jeff King b32fa95fd8 convert trivial cases to ALLOC_ARRAY
Each of these cases can be converted to use ALLOC_ARRAY or
REALLOC_ARRAY, which has two advantages:

  1. It automatically checks the array-size multiplication
     for overflow.

  2. It always uses sizeof(*array) for the element-size,
     so that it can never go out of sync with the declared
     type of the array.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-22 14:51:09 -08:00
René Scharfe 8828f2985f use child_process_init() to initialize struct child_process variables
Call child_process_init() instead of zeroing the memory of variables of
type struct child_process by hand before use because the former is both
clearer and shorter.

Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-28 14:56:17 -07:00
René Scharfe 2756ca4347 use REALLOC_ARRAY for changing the allocation size of arrays
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-18 09:13:42 -07:00
René Scharfe d318027932 run-command: introduce CHILD_PROCESS_INIT
Most struct child_process variables are cleared using memset first after
declaration.  Provide a macro, CHILD_PROCESS_INIT, that can be used to
initialize them statically instead.  That's shorter, doesn't require a
function call and is slightly more readable (especially given that we
already have STRBUF_INIT, ARGV_ARRAY_INIT etc.).

Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-20 09:53:37 -07:00
Jeff King cf4fff579e refactor skip_prefix to return a boolean
The skip_prefix() function returns a pointer to the content
past the prefix, or NULL if the prefix was not found. While
this is nice and simple, in practice it makes it hard to use
for two reasons:

  1. When you want to conditionally skip or keep the string
     as-is, you have to introduce a temporary variable.
     For example:

       tmp = skip_prefix(buf, "foo");
       if (tmp)
	       buf = tmp;

  2. It is verbose to check the outcome in a conditional, as
     you need extra parentheses to silence compiler
     warnings. For example:

       if ((cp = skip_prefix(buf, "foo"))
	       /* do something with cp */

Both of these make it harder to use for long if-chains, and
we tend to use starts_with() instead. However, the first line
of "do something" is often to then skip forward in buf past
the prefix, either using a magic constant or with an extra
strlen(3) (which is generally computed at compile time, but
means we are repeating ourselves).

This patch refactors skip_prefix() to return a simple boolean,
and to provide the pointer value as an out-parameter. If the
prefix is not found, the out-parameter is untouched. This
lets you write:

  if (skip_prefix(arg, "foo ", &arg))
	  do_foo(arg);
  else if (skip_prefix(arg, "bar ", &arg))
	  do_bar(arg);

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-20 10:44:43 -07:00
Jeff King 5eb7f7ead8 run_column_filter: use argv_array
We currently set up the argv array by hand in a fixed-size
stack-local array. Using an argv array is more readable, as
it handles buffer allocation us (not to mention makes it
obvious we do not overflow the array).

However, there's a more subtle benefit, too. We leave the
function having run start_command (with the child_process
in a static global), and then later run finish_command from
another function. That means when we run finish_command,
neither column_process.argv nor the memory it points to is
valid any longer.

Most of the time finish_command does not bother looking at
argv, but it may if it encounters an error (e.g., waitpid
failure or signal death). This is unusual, which is why
nobody has noticed. But by using run-command's built-in
argv_array, the memory ownership is handled for us
automatically.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-05-15 09:49:10 -07:00
Justin Lebar 01689909eb comments: fix misuses of "nor"
Signed-off-by: Justin Lebar <jlebar@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-31 15:29:27 -07:00
Nguyễn Thái Ngọc Duy b27004eb32 column: support piping stdout to external git-column process
For too complicated output handling, it'd be easier to just spawn
git-column and redirect stdout to it. This patch provides helpers
to do that.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-27 09:26:38 -07:00
Nguyễn Thái Ngọc Duy 3f8eccbe16 column: add dense layout support
Normally all cells (and in turn columns) share the same width. This
layout mode can waste space because one long item can stretch our all
columns.

With COL_DENSE enabled, column width is calculated indepdendently. All
columns are shrunk to minimum, then it attempts to push cells of the
last row over to the next column with hope that everything still fits
even there's one row less. The process is repeated until the new layout
cannot fit in given width any more, or there's only one row left
(perfect!).

Apparently, this mode consumes more cpu than the old one, but it makes
better use of terminal space. For layouting one or two screens, cpu
usage should not be detectable.

This patch introduces option handling code besides layout modes and
enable/disable to expose this feature as "dense". The feature can be
turned off by specifying "nodense".

Thanks-to: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-27 09:26:38 -07:00
Nguyễn Thái Ngọc Duy 077539d734 column: add columnar layout
COL_COLUMN and COL_ROW fill column by column (or row by row
respectively), given the terminal width and how many space between
columns. All cells have equal width.

Strings are supposed to be in UTF-8. Valid ANSI escape strings are OK.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-27 09:26:38 -07:00
Nguyễn Thái Ngọc Duy 7e29b8254f Add column layout skeleton and git-column
A column option string consists of many token separated by either
a space or a  comma. A token belongs to one of three groups:

 - enabling: always, never and auto
 - layout mode: currently plain (which does not layout at all)
 - other future tuning flags

git-column can be used to pipe output to from a command that wants
column layout, but not to mess with its own output code. Simpler output
code can be changed to use column layout code directly.

Thanks-to: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-27 09:26:37 -07:00