We don't need it, as we no longer use HMAC_CTX_cleanup() directly.
Signed-off-by: Kazuki Yamaguchi <k@rhe.jp>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nobody in the active development community seems to watch breakages
in the rpmbuild target. As most major RPM based distros use their
own specfile when packaging us, they aren't looking after us as
their pristine upstream tree, either. At this point, it is turning
to be a disservice to the users to pretend that our tree natively
supports "make rpmbuild" target when we do not properly maintain it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In general "echo 2>&1 $msg" to redirect a possible error message
that comes from 'echo' itself into the same standard output stream
$msg is getting written to does not make any sense; it is not like
we are expecting to see any errors out of 'echo' in these statements,
and even if it were the case, there is no reason to prevent the
error messages from being sent to the standard error stream.
These are clearly meant to send the argument given to echo to the
standard error stream as error messages. Correctly redirect by
saying "send what is written to the standard output to the standard
error", i.e. "1>&2" aka ">&2".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent versions of GNU grep is pickier than before to decide if a
file is "binary" and refuse to give line-oriented hits when we
expect it to, unless explicitly told with "-a" option. As our
scripted Porcelains use sane_grep wrapper for line-oriented data,
even when the line may contain non-ASCII payload we took from
end-user data, use "grep -a" to implement sane_grep wrapper when
using an implementation of "grep" that takes the "-a" option.
* jc/sane-grep:
rebase-i: clarify "is this commit relevant?" test
sane_grep: pass "-a" if grep accepts it
Newer versions of GNU grep is reported to be pickier when we feed a
non-ASCII input and break some Porcelain scripts. As we know we do
not feed random binary file to our own sane_grep wrapper, allow us
to always pass "-a" by setting SANE_TEXT_GREP=-a Makefile variable
to work it around.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a new DEVELOPER knob that enables many compiler warning
options in the Makefile.
* ls/makefile-cflags-developer-tweak:
add DEVELOPER makefile knob to check for acknowledged warnings
We assume Git developers have a reasonably modern compiler and recommend
them to enable the DEVELOPER makefile knob to ensure their patches are
clear of all compiler warnings the Git core project cares about.
Enable the DEVELOPER makefile knob in the Travis-CI build.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test scripts have been updated to remove assumptions that are not
portable between Git for POSIX and Git for Windows, or to skip ones
with expectations that are not satisfiable on Git for Windows.
* js/mingw-tests: (21 commits)
gitignore: ignore generated test-fake-ssh executable
mingw: do not bother to test funny file names
mingw: skip a test in t9130 that cannot pass on Windows
mingw: handle the missing POSIXPERM prereq in t9124
mingw: avoid illegal filename in t9118
mingw: mark t9100's test cases with appropriate prereqs
t0008: avoid absolute path
mingw: work around pwd issues in the tests
mingw: fix t9700's assumption about directory separators
mingw: skip test in t1508 that fails due to path conversion
tests: turn off git-daemon tests if FIFOs are not available
mingw: disable mkfifo-based tests
mingw: accomodate t0060-path-utils for MSYS2
mingw: fix t5601-clone.sh
mingw: let lstat() fail with errno == ENOTDIR when appropriate
mingw: try to delete target directory before renaming
mingw: prepare the TMPDIR environment variable for shell scripts
mingw: factor out Windows specific environment setup
Git.pm: stop assuming that absolute paths start with a slash
mingw: do not trust MSYS2's MinGW gettext.sh
...
Since baaf233 (connect: improve check for plink to reduce false
positives, 2015-04-26), t5601 writes out a `plink.exe` for testing that
is actually a shell script. So the assumption that the `.exe` extension
implies that the file is *not* a shell script is now wrong.
Since there was no love for the idea of allowing `.exe` files to be
shell scripts on Windows, let's go the other way round: *make*
`plink.exe` a real `.exe`.
This fixes t5601-clone.sh in Git for Windows' SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code preparation for pluggable ref backends.
* dt/refs-backend-pre-vtable:
refs: break out ref conflict checks
files_log_ref_write: new function
initdb: make safe_create_dir public
refs: split filesystem-based refs code into a new file
refs/refs-internal.h: new header file
refname_is_safe(): improve docstring
pack_if_possible_fn(): use ref_type() instead of is_per_worktree_ref()
copy_msg(): rename to copy_reflog_msg()
verify_refname_available(): new function
verify_refname_available(): rename function
Apple's common crypto implementation of SHA1_Update() does not take
more than 4GB at a time, and we now have a compile-time workaround
for it.
* ad/sha1-update-chunked:
sha1: allow limiting the size of the data passed to SHA1_Update()
sha1: provide another level of indirection for the SHA-1 functions
Apple's common crypto implementation of SHA1_Update() does not take
more than 4GB at a time, and we now have a compile-time workaround
for it.
* ad/sha1-update-chunked:
sha1: allow limiting the size of the data passed to SHA1_Update()
sha1: provide another level of indirection for the SHA-1 functions
As another step in the move to pluggable reference backends, move the
code that is specific to the filesystem-based reference backend (i.e.,
the current system of storing references as loose and packed files) into
a separate file, refs/files-backend.c.
Aside from a tiny bit of file header boilerplate, this commit only moves
a subset of the code verbatim from refs.c to the new file, as can easily
be verified using patience diff:
git diff --patience $commit^:refs.c $commit:refs.c
git diff --patience $commit^:refs.c $commit:refs/files-backend.c
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
The linkage order of libraries was wrong in places around libcurl.
* rp/link-curl-before-ssl:
configure.ac: detect ssl need with libcurl
Makefile: make curl-config path configurable
Makefile: link libcurl before zlib
Using the previous commit's inredirection mechanism for SHA1,
support a chunked implementation of SHA1_Update() that limits the
amount of data in the chunk passed to SHA1_Update().
This is enabled by using the Makefile variable SHA1_MAX_BLOCK_SIZE
to specify chunk size. When using Apple's CommonCrypto library this
is set to 1GiB (the implementation cannot handle more 4GiB).
Signed-off-by: Atousa Pahlevan Duprat <apahlevan@ieee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation of "git mailinfo" was refactored so that a
mailinfo() function can be directly called from inside a process.
* jc/mailinfo-lib: (34 commits)
mailinfo: remove calls to exit() and die() deep in the callchain
mailinfo: handle charset conversion errors in the caller
mailinfo: libify
mailinfo: keep the parsed log message in a strbuf
mailinfo: handle_commit_msg() shouldn't be called after finding patchbreak
mailinfo: move content/content_top to struct mailinfo
mailinfo: move [ps]_hdr_data to struct mailinfo
mailinfo: move cmitmsg and patchfile to struct mailinfo
mailinfo: move charset to struct mailinfo
mailinfo: move transfer_encoding to struct mailinfo
mailinfo: move check for metainfo_charset to convert_to_utf8()
mailinfo: move metainfo_charset to struct mailinfo
mailinfo: move use_scissors and use_inbody_headers to struct mailinfo
mailinfo: move add_message_id and message_id to struct mailinfo
mailinfo: move patch_lines to struct mailinfo
mailinfo: move filter/header stage to struct mailinfo
mailinfo: move global "FILE *fin, *fout" to struct mailinfo
mailinfo: move keep_subject & keep_non_patch_bracket to struct mailinfo
mailinfo: introduce "struct mailinfo" to hold globals
mailinfo: move global "line" into mailinfo() function
...
The linkage order of libraries was wrong in places around libcurl.
* rp/link-curl-before-ssl:
configure.ac: detect ssl need with libcurl
Makefile: make curl-config path configurable
Makefile: link libcurl before zlib
Add the "list" subcommand to "git worktree".
* mr/worktree-list:
worktree: add 'list' command
worktree: add details to the worktree struct
worktree: add a function to get worktree details
worktree: refactor find_linked_symref function
worktree: add top-level worktree.c
Move the bulk of the code from builtin/mailinfo.c to mailinfo.c
so that new callers can start calling mailinfo() directly.
Note that a few calls to exit() and die() need to be cleaned up
for the API to be truly useful, which will come in later steps.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are situations, e.g. during cross compilation, where curl-config
program is not present in the PATH.
Make the makefile use a configurable curl-config program passed through
CURL_CONFIG variable which can be set through config.mak.
Also make this variable tunable through use of autoconf/configure. Configure
will set CURL_CONFIG variable in config.mak.autogen to whatever value has been
passed to ac_cv_prog_CURL_CONFIG.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For static linking especially library order while linking is important. For
example, libcurl wants symbols from zlib when building http-push, http-fetch
and remote-curl. So for these programs libcurl has to be linked before zlib.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many allocations that is manually counted (correctly) that are
followed by strcpy/sprintf have been replaced with a less error
prone constructs such as xstrfmt.
Macintosh-specific breakage was noticed and corrected in this
reroll.
* jk/war-on-sprintf: (70 commits)
name-rev: use strip_suffix to avoid magic numbers
use strbuf_complete to conditionally append slash
fsck: use for_each_loose_file_in_objdir
Makefile: drop D_INO_IN_DIRENT build knob
fsck: drop inode-sorting code
convert strncpy to memcpy
notes: document length of fanout path with a constant
color: add color_set helper for copying raw colors
prefer memcpy to strcpy
help: clean up kfmclient munging
receive-pack: simplify keep_arg computation
avoid sprintf and strcpy with flex arrays
use alloc_ref rather than hand-allocating "struct ref"
color: add overflow checks for parsing colors
drop strcpy in favor of raw sha1_to_hex
use sha1_to_hex_r() instead of strcpy
daemon: use cld->env_array when re-spawning
stat_tracking_info: convert to argv_array
http-push: use an argv_array for setup_revisions
fetch-pack: use argv_array for index-pack / unpack-objects
...
Customization to change the behaviour with "make -w" and "make -s"
in our Makefile was broken when they were used together.
* jk/make-findstring-makeflags-fix:
Makefile: fix MAKEFLAGS tests with multiple flags
The Makefile always runs the library archiver with hardcoded "crs"
options, which was inconvenient for exotic platforms on which
people want to use programs with totally different set of command
line options.
* jw/make-arflags-customizable:
Makefile: allow $(ARFLAGS) specified from the command line
The Makefile always runs the library archiver with hardcoded "crs"
options, which was inconvenient for exotic platforms on which
people want to use programs with totally different set of command
line options.
* jw/make-arflags-customizable:
Makefile: allow $(ARFLAGS) specified from the command line
Customization to change the behaviour with "make -w" and "make -s"
in our Makefile was broken when they were used together.
* jk/make-findstring-makeflags-fix:
Makefile: fix MAKEFLAGS tests with multiple flags
The infrastructure to rewrite "git submodule" in C is being built
incrementally. Let's polish these early parts well enough and make
them graduate to 'next' and 'master', so that the more involved
follow-up can start cooking on a solid ground.
* sb/submodule-helper:
submodule: rewrite `module_clone` shell function in C
submodule: rewrite `module_name` shell function in C
submodule: rewrite `module_list` shell function in C
Now that fsck has dropped its inode-sorting, there are no
longer any users of this knob, and it can go away.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
worktree.c contains functions to work with and get information from
worktrees. This introduction moves functions related to worktrees
from branch.c into worktree.c
Signed-off-by: Michael Rappazzo <rappazzo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Non-POSIX shells, such as /bin/sh on SunOS, do not support $((...))
arithmetic expansion or $(...) command substitution needed by
generate-cmdlist.sh. Make sure that we use a POSIX compliant shell
$(SHELL_PATH) when running generate-cmdlist.sh.
Signed-off-by: Alejandro R. Sedeño <asedeno@mit.edu>
Acked-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can do this because we have a very simple needs and run "ar"
exactly the same way everywhere ;-).
Requested-by: Jeffrey Walton
Signed-off-by: Junio C Hamano <gitster@pobox.com>
findstring is defined as $(findstring FIND,IN) so if multiple flags are
set these tests do the wrong thing unless $(MAKEFLAGS) is the second
argument.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the submodule operations work on a set of submodules.
Calculating and using this set is usually done via:
module_list "$@" | {
while read mode sha1 stage sm_path
do
# the actual operation
done
}
Currently the function `module_list` is implemented in the
git-submodule.sh as a shell script wrapping a perl script.
The rewrite is in C, such that it is faster and can later be
easily adapted when other functions are rewritten in C.
git-submodule.sh, similar to the builtin commands, will navigate
to the top-most directory of the repository and keep the
subdirectory as a variable. As the helper is called from
within the git-submodule.sh script, we are already navigated
to the root level, but the path arguments are still relative
to the subdirectory we were in when calling git-submodule.sh.
That's why there is a `--prefix` option pointing to an alternative
path which to anchor relative path arguments.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gitmodules API accessed from the C code learned to cache stuff
lazily.
* hv/submodule-config:
submodule: allow erroneous values for the fetchRecurseSubmodules option
submodule: use new config API for worktree configurations
submodule: extract functions for config set and lookup
submodule: implement a config API for lookup of .gitmodules values
The "lockfile" API has been rebuilt on top of a new "tempfile" API.
* mh/tempfile:
credential-cache--daemon: use tempfile module
credential-cache--daemon: delete socket from main()
gc: use tempfile module to handle gc.pid file
lock_repo_for_gc(): compute the path to "gc.pid" only once
diff: use tempfile module
setup_temporary_shallow(): use tempfile module
write_shared_index(): use tempfile module
register_tempfile(): new function to handle an existing temporary file
tempfile: add several functions for creating temporary files
prepare_tempfile_object(): new function, extracted from create_tempfile()
tempfile: a new module for handling temporary files
commit_lock_file(): use get_locked_file_path()
lockfile: add accessor get_lock_file_path()
lockfile: add accessors get_lock_file_fd() and get_lock_file_fp()
create_bundle(): duplicate file descriptor to avoid closing it twice
lockfile: move documentation to lockfile.h and lockfile.c
527ec39 (generate-cmdlist: parse common group commands, 2015-05-21)
replaced generate-cmdlist.sh with a more functional Perl version,
generate-cmdlist.perl. The Perl version gleans named tags from a new
"common groups" section in command-list.txt and recognizes those
tags in "command list" section entries in place of the old 'common'
tag. This allows git-help to, not only recognize, but also group
common commands.
Although the tests require Perl, 527ec39 creates an unconditional
dependence upon Perl in the build system itself, which can not be
overridden with NO_PERL. Such a dependency may be undesirable; for
instance, the 'git-lite' package in the FreeBSD ports tree is
intended as a minimal Git installation (which may, for example, be
useful on servers needing only local clone and update capability),
which, historically, has not depended upon Perl[1].
Therefore, revive generate-cmdlist.sh and extend it to recognize
"common groups" and its named tags. Retire generate-cmdlist.perl.
[1]: http://thread.gmane.org/gmane.comp.version-control.git/275905/focus=276132
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* hv/submodule-config:
submodule: allow erroneous values for the fetchRecurseSubmodules option
submodule: use new config API for worktree configurations
submodule: extract functions for config set and lookup
submodule: implement a config API for lookup of .gitmodules values
In a superproject some commands need to interact with submodules. They
need to query values from the .gitmodules file either from the worktree
of from certain revisions. At the moment this is quite hard since a
caller would need to read the .gitmodules file from the history and then
parse the values. We want to provide an API for this so we have one
place to get values from .gitmodules from any revision (including the
worktree).
The API is realized as a cache which allows us to lazily read
.gitmodules configurations by commit into a runtime cache which can then
be used to easily lookup values from it. Currently only the values for
path or name are stored but it can be extended for any value needed.
It is expected that .gitmodules files do not change often between
commits. Thats why we lookup the .gitmodules sha1 from a commit and then
either lookup an already parsed configuration or parse and cache an
unknown one for each sha1. The cache is lazily build on demand for each
requested commit.
This cache can be used for all purposes which need knowledge about
submodule configurations. Example use cases are:
* Recursive submodule checkout needs to lookup a submodule name from
its path when a submodule first appears. This needs be done before
this configuration exists in the worktree.
* The implementation of submodule support for 'git archive' needs to
lookup the submodule name to generate the archive when given a
revision that is not checked out.
* 'git fetch' when given the --recurse-submodules=on-demand option (or
configuration) needs to lookup submodule names by path from the
database rather than reading from the worktree. For new submodule it
needs to lookup the name from its path to allow cloning new
submodules into the .git folder so they can be checked out without
any network interaction when the user does a checkout of that
revision.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A lot of work went into defining the state diagram for lockfiles and
ensuring correct, race-resistant cleanup in all circumstances.
Most of that infrastructure can be applied directly to *any* temporary
file. So extract a new "tempfile" module from the "lockfile" module.
Reimplement lockfile on top of tempfile.
Subsequent commits will add more users of the new module.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the beginning of the rewrite of git-am.sh to C, in order to not break
existing test scripts that depended on a functional git-am, a
redirection to git-am.sh was introduced that would activate if the
environment variable _GIT_USE_BUILTIN_AM was not defined.
Now that all of git-am.sh's functionality has been re-implemented in
builtin/am.c, remove this redirection, and retire git-am.sh into
contrib/examples/.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the purpose of rewriting git-am.sh into a C builtin, implement a
skeletal builtin/am.c that redirects to $GIT_EXEC_PATH/git-am if the
environment variable _GIT_USE_BUILTIN_AM is not defined. Since in the
Makefile git-am.sh takes precedence over builtin/am.c,
$GIT_EXEC_PATH/git-am will contain the shell script git-am.sh, and thus
this allows us to fall back on the functional git-am.sh when running the
test suite for tests that depend on a working git-am implementation.
Since git-am.sh cannot handle any environment modifications by
setup_git_directory(), "am" is declared with no setup flags in git.c. On
the other hand, to re-implement git-am.sh in builtin/am.c, we need to
run all the git dir and work tree setup logic that git.c typically does
for us. As such, we work around this temporarily by copying the logic in
git.c's run_builtin(), which is roughly:
prefix = setup_git_directory();
trace_repo_setup(prefix);
setup_work_tree();
This redirection should be removed when all the features of git-am.sh
have been re-implemented in builtin/am.c.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement 'git pull' in C.
* pt/pull-builtin:
pull: remove redirection to git-pull.sh
pull --rebase: error on no merge candidate cases
pull --rebase: exit early when the working directory is dirty
pull: configure --rebase via branch.<name>.rebase or pull.rebase
pull: teach git pull about --rebase
pull: set reflog message
pull: implement pulling into an unborn branch
pull: fast-forward working tree if head is updated
pull: check if in unresolved merge state
pull: support pull.ff config
pull: error on no merge candidates
pull: pass git-fetch's options to git-fetch
pull: pass git-merge's options to git-merge
pull: pass verbosity, --progress flags to fetch and merge
pull: implement fetch + merge
pull: implement skeletal builtin pull
argv-array: implement argv_array_pushv()
parse-options-cb: implement parse_opt_passthru_argv()
parse-options-cb: implement parse_opt_passthru()
GSoC project to rebuild ref listing by branch and tag based on the
for-each-ref machinery. This is its first part.
* kn/for-each-ref:
ref-filter: make 'ref_array_item' use a FLEX_ARRAY for refname
for-each-ref: introduce filter_refs()
ref-filter: move code from 'for-each-ref'
ref-filter: add 'ref-filter.h'
for-each-ref: rename variables called sort to sorting
for-each-ref: rename some functions and make them public
for-each-ref: introduce 'ref_array_clear()'
for-each-ref: introduce new structures for better organisation
for-each-ref: rename 'refinfo' to 'ref_array_item'
for-each-ref: clean up code
for-each-ref: extract helper functions out of grab_single_ref()
Move most of the code from 'for-each-ref' to 'ref-filter' to make
it publicly available to other commands, this is to unify the code
of 'tag -l', 'branch -l' and 'for-each-ref' so that they can share
their implementations with each other.
Add 'ref-filter' to the Makefile, this completes the movement of code
from 'for-each-ref' to 'ref-filter'.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout [<tree-ish>] <paths>" spent unnecessary cycles
checking if the current branch was checked out elsewhere, when we
know we are not switching the branches ourselves.
* nd/multiple-work-trees:
worktree: new place for "git prune --worktrees"
checkout: don't check worktrees when not necessary
Commit 23af91d (prune: strategies for linked checkouts - 2014-11-30)
adds "--worktrees" to "git prune" without realizing that "git prune" is
for object database only. This patch moves the same functionality to a
new command "git worktree".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
At the beginning of the rewrite of git-pull.sh to C, we introduced a
redirection to git-pull.sh if the environment variable
_GIT_USE_BUILTIN_PULL was not defined in order to not break test scripts
that relied on a functional git-pull.
Now that all of git-pull's functionality has been re-implemented in
builtin/pull.c, remove this redirection, and retire the old git-pull.sh
into contrib/examples/.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the purpose of rewriting git-pull.sh into a C builtin, implement a
skeletal builtin/pull.c that redirects to $GIT_EXEC_PATH/git-pull.sh if
the environment variable _GIT_USE_BUILTIN_PULL is not defined. This
allows us to fall back on the functional git-pull.sh when running the
test suite for tests that depend on a working git-pull implementation.
This redirection should be removed when all the features of git-pull.sh
have been re-implemented in builtin/pull.c.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test clean-up.
* jk/skip-http-tests-under-no-curl:
tests: skip dav http-push tests under NO_EXPAT=NoThanks
t/lib-httpd.sh: skip tests if NO_CURL is defined
Group list of commands shown by "git help" along the workflow
elements to help early learners.
* sg/help-group:
help: respect new common command grouping
command-list.txt: drop the "common" tag
generate-cmdlist: parse common group commands
command-list.txt: add the common groups block
command-list: prepare machinery for upcoming "common groups" section
Every time we run "make", we update perl/PM.stamp, which
contains a list of all of the perl module files (if it's
updated, we need to rebuild perl/perl.mak, since the
Makefile will not otherwise know about the new files).
This means that every time "make" is run, we see:
GEN perl/PM.stamp
in the output, even though it is not likely to have changed.
Let's make this recipe completely silent, as we do for other
auto-generated dependency files (e.g., GIT-CFLAGS).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We force the GIT-BUILD-OPTIONS recipe to run every time
"make" is invoked. We must do this to catch new options
which may have come from the command-line or environment.
However, we actually update the file's timestamp each time
the recipe is run, whether anything changed or not. As a
result, any files which depend on it (for example, all of
the perl scripts, which need to know whether NO_PERL was
set) will be re-built every time.
Let's do our usual trick of writing to a tempfile, then
doing a "cmp || mv" to update the file only when something
changed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rule for "git-instaweb" depends on "gitweb". This makes
no sense, because:
1. git-instaweb has no build-time dependency on gitweb; it
is a run-time dependency
2. gitweb is a directory that we want to recursively make
in. As a result, its recipe is marked .PHONY, which
causes "make" to rebuild git-instaweb every time it is
run.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the index to optionally remember already seen untracked files
to speed up "git status" in a working tree with tons of cruft.
* nd/untracked-cache: (24 commits)
git-status.txt: advertisement for untracked cache
untracked cache: guard and disable on system changes
mingw32: add uname()
t7063: tests for untracked cache
update-index: test the system before enabling untracked cache
update-index: manually enable or disable untracked cache
status: enable untracked cache
untracked-cache: temporarily disable with $GIT_DISABLE_UNTRACKED_CACHE
untracked cache: mark index dirty if untracked cache is updated
untracked cache: print stats with $GIT_TRACE_UNTRACKED_STATS
untracked cache: avoid racy timestamps
read-cache.c: split racy stat test to a separate function
untracked cache: invalidate at index addition or removal
untracked cache: load from UNTR index extension
untracked cache: save to an index extension
ewah: add convenient wrapper ewah_serialize_strbuf()
untracked cache: don't open non-existent .gitignore
untracked cache: mark what dirs should be recursed/saved
untracked cache: record/validate dir mtime and reuse cached output
untracked cache: make a wrapper around {open,read,close}dir()
...
Test clean-up.
* jk/skip-http-tests-under-no-curl:
tests: skip dav http-push tests under NO_EXPAT=NoThanks
t/lib-httpd.sh: skip tests if NO_CURL is defined
Parse the group block to create the array of group descriptions:
static char *common_cmd_groups[] = {
N_("starting a working area"),
N_("working on the current change"),
N_("working with others"),
N_("examining the history and state"),
N_("growing, marking and tweaking your history"),
};
then map each element of common_cmds[] to a group via its index:
static struct cmdname_help common_cmds[] = {
{"add", N_("Add file contents to the index"), 1},
{"branch", N_("List, create, or delete branches"), 4},
{"checkout", N_("Checkout a branch or paths to the ..."), 4},
{"clone", N_("Clone a repository into a new directory"), 0},
{"commit", N_("Record changes to the repository"), 4},
...
};
so that 'git help' can print those commands grouped by theme.
Only commands tagged with an attribute from the group block are emitted to
common_cmds[].
[commit message by Sébastien Guimmara <sebastien.guimmara@gmail.com>]
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ultimate goal is for "git help" to classify common commands by
group. Toward this end, a subsequent patch will add a new "common
groups" section to command-list.txt preceding the actual command list.
As preparation, teach existing command-list.txt parsing machinery, which
doesn't care about grouping, to skip over this upcoming "common groups"
section.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We spend a lot of time in strbuf_getwholeline in a tight
loop reading characters from a stdio handle into a buffer.
The libc getdelim() function can do this for us with less
overhead. It's in POSIX.1-2008, and was a GNU extension
before that. Therefore we can't rely on it, but can fall
back to the existing getc loop when it is not available.
The HAVE_GETDELIM knob is turned on automatically for Linux,
where we have glibc. We don't need to set any new
feature-test macros, because we already define _GNU_SOURCE.
Other systems that implement getdelim may need to other
macros (probably _POSIX_C_SOURCE >= 200809L), but we can
address that along with setting the Makefile knob after
testing the feature on those systems.
Running "git rev-parse refs/heads/does-not-exist" on a repo
with an extremely large (1.6GB) packed-refs file went from
(best-of-5):
real 0m8.601s
user 0m8.084s
sys 0m0.524s
to:
real 0m6.768s
user 0m6.340s
sys 0m0.432s
for a wall-clock speedup of 21%.
Based on a patch from Rasmus Villemoes <rv@rasmusvillemoes.dk>.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We now detect number of CPUs on older BSD-derived systems.
* km/bsd-sysctl:
thread-utils.c: detect CPU count on older BSD-like systems
configure: support HAVE_BSD_SYSCTL option
On BSD-compatible systems some information such as the number
of available CPUs may only be available via the sysctl function.
Add support for a HAVE_BSD_SYSCTL option complete with autoconf
support and include the sys/syctl.h header when the option is
enabled to make the sysctl function available.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain older vintages of cURL give irregular output from
"curl-config --vernum", which confused our build system.
* tc/curl-vernum-output-broken-in-7.11:
Makefile: handle broken curl version number in version check
curl 7.11.0 through 7.12.2 when built from their official release
archives will present a 5 digit version number instead of the documented
6 digits which breaks the version check in the Makefile.
Correct these broken version numbers on the fly when extracting them to
ensure the comparison works correctly.
[jc: shortened the new sed scripts a bit]
Signed-off-by: Tom G. Christensen <tgc@statsbiblioteket.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gettext N_ macro is used to mark strings for translation
without actually translating them. At runtime the string is
expected to be passed to the gettext API for translation.
If two N_ macro invocations appear next to each other with only
whitespace (or nothing at all) between them, the two separate
strings will be marked for translation, but the preprocessor
will then silently combine the strings into one and at runtime
the string passed to gettext will not match the strings that
were translated so no translation will actually occur.
Avoid this by adding parentheses around the expansion of the
N_ macro so that instead of ending up with two adjacent strings
that are then combined by the preprocessor, two adjacent strings
surrounded by parentheses result instead which causes a compile
error so the mistake can be quickly found and corrected.
However, since these string literals are typically assigned to
static variables and not all compilers support parenthesized
string literal assignments, allow this to be controlled by the
Makefile with the default only enabled when the compiler is
known to support the syntax.
For now only __GNUC__ enables this by default which covers both
gcc and clang which should result in early detection of any
adjacent N_ macros.
Although the necessary tests make the affected files a bit less
elegant, the benefit of avoiding propagation of a translation-
marking error to all the translation teams thus creating extra
work for them when the error is eventually detected and fixed
would seem to outweigh the minor inelegance the additional
configuration tests introduce.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OpenSSL version 0.9.6b and before defined the function HMAC_cleanup.
Newer versions define HMAC_CTX_cleanup. Check for HMAC_CTX_cleanup and
fall back to HMAC_cleanup when the newer function is missing.
Signed-off-by: Reuben Hawkins <reubenhwk@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set or clear Makefile variables HAVE_CLOCK_GETTIME and
HAVE_CLOCK_MONOTONIC based upon results of the checks (overriding
default values from config.mak.uname).
CLOCK_MONOTONIC isn't available on RHEL3, but there are still RHEL3
systems being used in production.
Signed-off-by: Reuben Hawkins <reubenhwk@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Newer libCurl knows how to talk IMAP; "git imap-send" has been
updated to use this instead of a hand-rolled OpenSSL calls.
* br/imap-send-via-libcurl:
git-imap-send: use libcurl for implementation
Long overdue departure from the assumption that S_IFMT is shared by
everybody made in 2005.
* dm/compat-s-ifmt-for-zos:
compat: convert modes to use portable file type values
The build procedure did not bother fixing perl and python scripts
when NO_PERL and NO_PYTHON build-time configuration changed.
* jk/rebuild-perl-scripts-with-no-perl-seting-change:
Makefile: have python scripts depend on NO_PYTHON setting
Makefile: simplify by using SCRIPT_{PERL,SH}_GEN macros
Makefile: have perl scripts depend on NO_PERL setting
The build procedure did not bother fixing perl and python scripts
when NO_PERL and NO_PYTHON build-time configuration changed.
* jk/rebuild-perl-scripts-with-no-perl-seting-change:
Makefile: have python scripts depend on NO_PYTHON setting
Makefile: simplify by using SCRIPT_{PERL,SH}_GEN macros
Makefile: have perl scripts depend on NO_PERL setting
This adds simple wrapper functions around calls to stat(), fstat(),
and lstat() that translate the operating system's native file type
bits to those used by most operating systems. It also rewrites the
S_IF* macros to the common values, so all file type processing is
performed using the translated modes. This makes projects portable
across operating systems that use different file type definitions.
Only the file type bits may be affected by these compatibility
functions; the file permission bits are assumed to be 07777 and are
passed through unchanged.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like the perl scripts, python scripts need a dependency to ensure they
are rebuilt when switching between the "dummy" versions that run
without Python and the real thing.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SCRIPT_PERL_GEN is defined as $(patsubst %.perl,%,$(SCRIPT_PERL))
for use in targets like build-perl-script used by makefiles in
subdirectories that override SCRIPT_PERL (see v1.8.2-rc0~17^2,
"git-remote-mediawiki: use toplevel's Makefile", 2013-02-08).
The same expression is used in the rules that actually write the
generated perl scripts, and since these rules were introduced before
SCRIPT_PERL_GEN, they use the longhand instead of that macro. Use the
macro to make reading easier.
Likewise for SCRIPT_SH_GEN. The Python rules already got the same
simplification in v1.8.4-rc0~162^2~8 (2013-05-24).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If NO_PERL is not set, our perl scripts are built as
usual. If it is set, then we build "dummy" versions that
tell you git was built without perl support and exit
gracefully.
However, if you switch to NO_PERL in a directory with
existing build artifacts, we do not notice that the files
need rebuilt. We see only that they are newer than the
"unimplemented.sh" wrapper and assume they are done. So
doing:
make
make NO_PERL=Nope
would result in a git-add--interactive script that uses perl
(and running the test suite would make use of it).
Instead, we should trigger a rebuild of the perl scripts
anytime NO_PERL changes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use libcurl's high-level API functions to implement git-imap-send
instead of the previous low-level OpenSSL-based functions.
Since version 7.30.0, libcurl's API has been able to communicate with
IMAP servers. Using those high-level functions instead of the current
ones would reduce imap-send.c by some 1200 lines of code. For now,
the old ones are wrapped in #ifdefs, and the new functions are enabled
by make if curl's version is >= 7.34.0, from which version on curl's
CURLOPT_LOGIN_OPTIONS (enabling IMAP authentication) parameter has been
available. The low-level functions will still be used for tunneling
into the server for now.
As I don't have access to that many IMAP servers, I haven't been able to
test the new code with a wide variety of parameter combinations. I did
test both secure and insecure (imaps:// and imap://) connections and
values of "PLAIN" and "LOGIN" for the authMethod.
In order to suppress a sparse warning about "using sizeof on a
function", we use the same solution used in commit 9371322a6
("sparse: suppress some "using sizeof on a function" warnings",
06-10-2013) which solved exactly this problem for the other commands
using libcurl.
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Bernhard Reiter <ockham@raz.or.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
z/OS port
* dm/port2zos:
compat/bswap.h: detect endianness from XL C compiler macros
Makefile: reorder linker flags in the git executable rule
git-compat-util.h: support variadic macros with the XL C compiler
The XL C compiler can fail due to mixing library path and object
file arguments, for example when linking git while building with
"gmake LDFLAGS=-L$prefix/lib".
Move the ALL_LDFLAGS variable expansion in the git executable rule
to be consistent with all the other linking rules, namely to have
LDFLAGS such as -L$where before the object files *.o being linked
together.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new filter to programatically edit the tail end of the commit log
messages.
* cc/interpret-trailers:
Documentation: add documentation for 'git interpret-trailers'
trailer: add tests for commands in config file
trailer: execute command from 'trailer.<name>.command'
trailer: add tests for "git interpret-trailers"
trailer: add interpret-trailers command
trailer: put all the processing together and print
trailer: parse trailers from file or stdin
trailer: process command line trailer arguments
trailer: read and process config information
trailer: process trailers from input message and arguments
trailer: add data structures and basic functions
This patch adds the "git interpret-trailers" command.
This command uses the previously added process_trailers()
function in trailer.c.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will use a doubly linked list to store all information
about trailers and their configuration.
This way we can easily remove or add trailers to or from
trailer lists while traversing the lists in either direction.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tb/crlf-tests:
MinGW: update tests to handle a native eol of crlf
Makefile: propagate NATIVE_CRLF to C
t0027: Tests for core.eol=native, eol=lf, eol=crlf
Admit that keeping LIB_H up-to-date, only for those that do not use
the automatically generated dependencies, is a losing battle, and
make it conservative by making everything depend on anything.
* jk/make-simplify-dependencies:
Makefile: drop CHECK_HEADER_DEPENDENCIES code
Makefile: use `find` to determine static header dependencies
i18n: treat "make pot" as an explicitly-invoked target
Add in-core caching layer to let us avoid reading the same
configuration files number of times.
* ta/config-set:
test-config: add tests for the config_set API
add `config_set` API for caching config-like files
Commit 95f31e9a (convert: The native line-ending is \r\n on MinGW,
2010-09-04) correctly points out that the NATIVE_CRLF setting is
incorrectly set on Mingw git. However, the Makefile variable is not
propagated to the C preprocessor and results in no change. This patch
pushes the definition to the C code and adds a test to validate that
when core.eol as native is crlf, we actually normalize text files to
this line ending convention when core.autocrlf is false.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code was useful when we kept a static list of header
files, and it was easy to forget to update it. Since the last
commit, we generate the list dynamically.
Technically this could still be used to find a dependency
that our dynamic check misses (e.g., a header file without a
".h" extension). But that is reasonably unlikely to be
added, and even less likely to be noticed by this tool
(because it has to be run manually)., It is not worth
carrying around the cruft in the Makefile.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kazuki Yamaguchi
Junio C Hamano
Lars Schneider
Johannes Schindelin
Elia Pinto
Michael Haggerty
Atousa Pahlevan Duprat
Remi Pommarel
Jeff King
Michael Rappazzo
Alejandro R. Sedeño
John Keeping
Stefan Beller
Eric Sunshine
Heiko Voigt
Paul Tan
Karthik Nayak
Karsten Blees
Nguyễn Thái Ngọc Duy
Kyle J. McKay
Tom G. Christensen
Reuben Hawkins
David Michael
Jonathan Nieder
Bernhard Reiter
Christian Couder
René Scharfe
Ian Liu Rodrigues
Pat Thoyts