A major part of "git submodule update" has been ported to C to take
advantage of the recently added framework to run download tasks in
parallel.
* sb/submodule-parallel-update:
clone: allow an explicit argument for parallel submodule clones
submodule update: expose parallelism to the user
submodule helper: remove double 'fatal: ' prefix
git submodule update: have a dedicated helper for cloning
run_processes_parallel: rename parameters for the callbacks
run_processes_parallel: treat output of children as byte array
submodule update: direct error message to stderr
fetching submodules: respect `submodule.fetchJobs` config option
submodule-config: drop check against NULL
submodule-config: keep update strategy around
strbuf_getwholeline() did not NUL-terminate the buffer on certain
corner cases in its error codepath.
* jk/getwholeline-getdelim-empty:
strbuf_getwholeline: NUL-terminate getdelim buffer on error
Commit 0cc30e0 (strbuf_getwholeline: use getdelim if it is
available, 2015-04-16) tries to clean up after getdelim()
returns EOF, but gets one case wrong, which can lead in some
obscure cases to us reading uninitialized memory.
After getdelim() returns -1, we re-initialize the strbuf
only if sb->buf is NULL. The thinking was that either:
1. We fed an existing allocated buffer to getdelim(), and
at most it would have realloc'd, leaving our NUL in
place.
2. We didn't have a buffer to feed, so we gave getdelim()
NULL; sb->buf will remain NULL, and we just want to
restore the empty slopbuf.
But that second case isn't quite right. getdelim() may
allocate a buffer, write nothing into it, and then return
EOF. The resulting strbuf rightfully has sb->len set to "0",
but is missing the NUL terminator in the first byte.
Most call-sites are fine with this. They see the EOF and
don't bother looking at the strbuf. Or they notice that
sb->len is empty, and don't look at the contents. But
there's at least one case that does neither, and relies on
parsing the resulting (possibly zero-length) string:
fast-import. You can see this in action with the new test
(though we probably only notice failure there when run with
--valgrind or ASAN).
We can fix this by unconditionally resetting the strbuf when
we have a buffer after getdelim(). That fixes case 2 above.
Case 1 is probably already fine in practice, but it does not
hurt for us to re-assert our invariants (especially because
we are relying on whatever getdelim() happens to do, which
may vary from platform to platform). Our fix covers that
case, too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not want the output to be interrupted by a NUL byte, so we
cannot use raw fputs. Introduce strbuf_write to avoid having long
arguments in run-command.c.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update various codepaths to avoid manually-counted malloc().
* jk/tighten-alloc: (22 commits)
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
tree-diff: catch integer overflow in combine_diff_path allocation
...
We frequently allocate strings as xmalloc(len + 1), where
the extra 1 is for the NUL terminator. This can be done more
simply with xmallocz, which also checks for integer
overflow.
There's no case where switching xmalloc(n+1) to xmallocz(n)
is wrong; the result is the same length, and malloc made no
guarantees about what was in the buffer anyway. But in some
cases, we can stop manually placing NUL at the end of the
allocated buffer. But that's only safe if it's clear that
the contents will always fill the buffer.
In each case where this patch does so, I manually examined
the control flow, and I tried to err on the side of caution.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The preliminary clean-up for jc/peace-with-crlf topic.
* jc/strbuf-getline:
strbuf: give strbuf_getline() to the "most text friendly" variant
checkout-index: there are only two possible line terminations
update-index: there are only two possible line terminations
check-ignore: there are only two possible line terminations
check-attr: there are only two possible line terminations
mktree: there are only two possible line terminations
strbuf: introduce strbuf_getline_{lf,nul}()
strbuf: make strbuf_getline_crlf() global
strbuf: miniscule style fix
Now there is no direct caller to strbuf_getline(), we can demote it
to file-scope static that is private to strbuf.c and rename it to
strbuf_getdelim(). Rename strbuf_getline_crlf(), which is designed
to be the most "text friendly" variant, and allow it to take over
this simplest name, strbuf_getline(), so we can add more uses of it
without having to type _crlf over and over again in the coming
steps.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strbuf_getline() interface allows a byte other than LF or NUL as
the line terminator, but this is only because I wrote these
codepaths anticipating that there might be a value other than NUL
and LF that could be useful when I introduced line_termination long
time ago. No useful caller that uses other value has emerged.
By now, it is clear that the interface is overly broad without a
good reason. Many codepaths have hardcoded preference to read
either LF terminated or NUL terminated records from their input, and
then call strbuf_getline() with LF or NUL as the third parameter.
This step introduces two thin wrappers around strbuf_getline(),
namely, strbuf_getline_lf() and strbuf_getline_nul(), and
mechanically rewrites these call sites to call either one of
them. The changes contained in this patch are:
* introduction of these two functions in strbuf.[ch]
* mechanical conversion of all callers to strbuf_getline() with
either '\n' or '\0' as the third parameter to instead call the
respective thin wrapper.
After this step, output from "git grep 'strbuf_getline('" would
become a lot smaller. An interim goal of this series is to make
this an empty set, so that we can have strbuf_getline_crlf() take
over the shorter name strbuf_getline().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Often we read "text" files that are supplied by the end user
(e.g. commit log message that was edited with $GIT_EDITOR upon 'git
commit -e'), and in some environments lines in a text file are
terminated with CRLF. Existing strbuf_getline() knows to read a
single line and then strip the terminating byte from the result, but
it is handy to have a version that is more tailored for a "text"
input that takes both '\n' and '\r\n' as line terminator (aka
<newline> in POSIX lingo) and returns the body of the line after
stripping <newline>.
Recently reimplemented "git am" uses such a function implemented
privately; move it to strbuf.[ch] and make it available for others.
Note that we do not blindly replace calls to strbuf_getline() that
uses LF as the line terminator with calls to strbuf_getline_crlf()
and this is very much deliberate. Some callers may want to treat an
incoming line that ends with CR (and terminated with LF) to have a
payload that includes the final CR, and such a blind replacement
will result in misconversion when done without code audit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new call will read from a file descriptor into a strbuf once. The
underlying call xread is just run once. xread only reattempts
reading in case of EINTR, which makes it suitable to use for a
nonblocking read.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal stripspace() function has been moved to where it
logically belongs to, i.e. strbuf API, and the command line parser
of "git stripspace" has been updated to use the parse_options API.
* tk/stripspace:
stripspace: use parse-options for command-line parsing
strbuf: make stripspace() part of strbuf
This function is also used in other builtins than stripspace, so it
makes sense to have it in a more generic place. Since it operates
on an strbuf and the function is declared in strbuf.h, move it to
strbuf.c and add the corresponding prefix to its name, just like
other API functions in the strbuf_* family.
Also switch all current users of stripspace() to the new function
name and keep a temporary wrapper inline function for any topic
branches still using stripspace().
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We sometimes sprintf into fixed-size buffers when we know
that the buffer is large enough to fit the input (either
because it's a constant, or because it's numeric input that
is bounded in size). Likewise with strcpy of constant
strings.
However, these sites make it hard to audit sprintf and
strcpy calls for buffer overflows, as a reader has to
cross-reference the size of the array with the input. Let's
use xsnprintf instead, which communicates to a reader that
we don't expect this to overflow (and catches the mistake in
case we do).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sha1_to_hex and find_unique_abbrev functions always
write into reusable static buffers. There are a few problems
with this:
- future calls overwrite our result. This is especially
annoying with find_unique_abbrev, which does not have a
ring of buffers, so you cannot even printf() a result
that has two abbreviated sha1s.
- if you want to put the result into another buffer, we
often strcpy, which looks suspicious when auditing for
overflows.
This patch introduces sha1_to_hex_r and find_unique_abbrev_r,
which write into a user-provided buffer. Of course this is
just punting on the overflow-auditing, as the buffer
obviously needs to be GIT_SHA1_HEXSZ + 1 bytes. But it is
much easier to audit, since that is a well-known size.
We retain the non-reentrant forms, which just become thin
wrappers around the reentrant ones. This patch also adds a
strbuf variant of find_unique_abbrev, which will be handy in
later patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf_read() used to have one extra iteration (and an unnecessary
strbuf_grow() of 8kB), which was eliminated.
* jh/strbuf-read-use-read-in-full:
strbuf_read(): skip unnecessary strbuf_grow() at eof
The loop in strbuf_read() uses xread() repeatedly while extending
the strbuf until the call returns zero. If the buffer is
sufficiently large to begin with, this results in xread()
returning the remainder of the file to the end (returning
non-zero), the loop extending the strbuf, and then making another
call to xread() to have it return zero.
By using read_in_full(), we can tell when the read reached the end
of file: when it returns less than was requested, it's eof. This
way we can avoid an extra iteration that allocates an extra 8kB
that is never used.
Signed-off-by: Jim Hill <gjthill@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git log" and friends a new "--date=format:..." option to
format timestamps using system's strftime(3).
* jk/date-mode-format:
strbuf: make strbuf_addftime more robust
introduce "format" date-mode
convert "enum date_mode" into a struct
show-branch: use DATE_RELATIVE instead of magic number
The return value of strftime is poorly designed; when it
returns 0, the caller cannot tell if the buffer was not
large enough, or if the output was actually 0 bytes. In the
original implementation of strbuf_addftime, we simply punted
and guessed that our 128-byte hint would be large enough.
We can do better, though, if we're willing to treat strftime
like less of a black box. We can munge the incoming format
to make sure that it never produces 0-length output, and
then "fix" the resulting output. That lets us reliably grow
the buffer based on strftime's return value.
Clever-idea-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is currently declared to return int, which could overflow for
large files.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This feeds the format directly to strftime. Besides being a
little more flexible, the main advantage is that your system
strftime may know more about your locale's preferred format
(e.g., how to spell the days of the week).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We spend a lot of time in strbuf_getwholeline in a tight
loop reading characters from a stdio handle into a buffer.
The libc getdelim() function can do this for us with less
overhead. It's in POSIX.1-2008, and was a GNU extension
before that. Therefore we can't rely on it, but can fall
back to the existing getc loop when it is not available.
The HAVE_GETDELIM knob is turned on automatically for Linux,
where we have glibc. We don't need to set any new
feature-test macros, because we already define _GNU_SOURCE.
Other systems that implement getdelim may need to other
macros (probably _POSIX_C_SOURCE >= 200809L), but we can
address that along with setting the Makefile knob after
testing the feature on those systems.
Running "git rev-parse refs/heads/does-not-exist" on a repo
with an extremely large (1.6GB) packed-refs file went from
(best-of-5):
real 0m8.601s
user 0m8.084s
sys 0m0.524s
to:
real 0m6.768s
user 0m6.340s
sys 0m0.432s
for a wall-clock speedup of 21%.
Based on a patch from Rasmus Villemoes <rv@rasmusvillemoes.dk>.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the recent speedup to strbuf_addch, we can avoid
calling strbuf_grow() in a tight loop of single-character
adds by instead checking strbuf_avail.
Note that we would instead call strbuf_addch directly here,
but it does more work than necessary: it will NUL-terminate
the result for each character read. Instead, in this loop we
read the characters one by one and then add the terminator
manually at the end.
Running "git rev-parse refs/heads/does-not-exist" on a repo
with an extremely large (1.6GB) packed-refs file went from
(best-of-5):
real 0m10.948s
user 0m10.548s
sys 0m0.412s
to:
real 0m8.601s
user 0m8.084s
sys 0m0.524s
for a wall-clock speedup of 21%.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf_getwholeline calls getc in a tight loop. On modern
libc implementations, the stdio code locks the handle for
every operation, which means we are paying a significant
overhead. We can get around this by locking the handle for
the whole loop and using the unlocked variant.
Running "git rev-parse refs/heads/does-not-exist" on a repo
with an extremely large (1.6GB) packed-refs file went from:
real 0m18.900s
user 0m18.472s
sys 0m0.448s
to:
real 0m10.953s
user 0m10.384s
sys 0m0.580s
for a wall-clock speedup of 42%. All times are best-of-3,
and done on a glibc 2.19 system.
Note that we call into strbuf_grow while holding the lock.
It's possible for that function to call other stdio
functions (e.g., printing to stderr when dying due to malloc
error); however, the POSIX.1-2001 definition of flockfile
makes it clear that the locks are per-handle, so we are fine
unless somebody else tries to read from our same handle.
This doesn't ever happen in the current code, and is
unlikely to be added in the future (we would have to do
something exotic like add a die_routine that tried to read
from stdin).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf_getwholeline calls fgetc in a tight loop. Using the
getc form, which can be implemented as a macro, should be
faster (and we do not care about it evaluating our argument
twice, as we just have a plain variable).
On my glibc system, running "git rev-parse
refs/heads/does-not-exist" on a file with an extremely large
(1.6GB) packed-refs file went from (best of 3 runs):
real 0m19.383s
user 0m18.876s
sys 0m0.528s
to:
real 0m18.900s
user 0m18.472s
sys 0m0.448s
for a wall-clock speedup of 2.5%.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commented output used to blindly add a SP before the payload
line, resulting in "# \t<indented text>\n" when the payload began
with a HT. Instead, produce "#\t<indented text>\n".
* jc/strbuf-add-lines-avoid-sp-ht-sequence:
strbuf_add_commented_lines(): avoid SP-HT sequence in commented lines
The strbuf_add_commented_lines() function passes a pair of prefixes,
one to be used for a non-empty line, and the other for an empty
line, to underlying add_lines(). The former is set to a comment
char followed by a SP, while the latter is set to just the comment
char. This is designed to give a SP after the comment character,
e.g. "# <user text>\n", on a line with some text, and to avoid
emitting an unsightly "# \n" for an empty line.
Teach this machinery to also use the latter space-less prefix when
the payload line begins with a tab, to show e.g. "#\t<user text>\n";
otherwise we will end up showing "# \t<user text>\n" which is
similarly unsightly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move strbuf_addchars() to strbuf.c, where it belongs, and make it
available for other callers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce the use of fixed sized buffer passed to getcwd() calls
by introducing xgetcwd() helper.
* rs/strbuf-getcwd:
use strbuf_add_absolute_path() to add absolute paths
abspath: convert absolute_path() to strbuf
use xgetcwd() to set $GIT_DIR
use xgetcwd() to get the current directory or die
wrapper: add xgetcwd()
abspath: convert real_path_internal() to strbuf
abspath: use strbuf_getcwd() to remember original working directory
setup: convert setup_git_directory_gently_1 et al. to strbuf
unix-sockets: use strbuf_getcwd()
strbuf: add strbuf_getcwd()
Move most of the code of absolute_path() into the new function
strbuf_add_absolute_path() and in the process transform it to use
struct strbuf and xgetcwd() instead of a PATH_MAX-sized buffer,
which can be too small on some file systems.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add strbuf_getcwd(), which puts the current working directory into a
strbuf. Because it doesn't use a fixed-size buffer it supports
arbitrarily long paths, provided the platform's getcwd() does as well.
At least on Linux and FreeBSD it handles paths longer than PATH_MAX
just fine.
Suggested-by: Karsten Blees <karsten.blees@gmail.com>
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/strip-suffix:
prepare_packed_git_one: refactor duplicate-pack check
verify-pack: use strbuf_strip_suffix
strbuf: implement strbuf_strip_suffix
index-pack: use strip_suffix to avoid magic numbers
use strip_suffix instead of ends_with in simple cases
replace has_extension with ends_with
implement ends_with via strip_suffix
add strip_suffix function
sha1_file: replace PATH_MAX buffer with strbuf in prepare_packed_git_one()
The ends_with function is essentially a simplified version
of strip_suffix, in which we throw away the stripped length.
Implementing it as an inline on top of strip_suffix has two
advantages:
1. We save a bit of duplicated code.
2. The suffix is typically a string literal, and we call
strlen on it. By making the function inline, many
compilers can replace the strlen call with a constant.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can use a strbuf to build up a string from parts, and
then detach it. In the general case, you might use multiple
strbuf_add* functions to do the building. However, in many
cases, a single strbuf_addf is sufficient, and we end up
with:
struct strbuf buf = STRBUF_INIT;
...
strbuf_addf(&buf, fmt, some, args);
str = strbuf_detach(&buf, NULL);
We can make this much more readable (and avoid introducing
an extra variable, which can clutter the code) by
introducing a convenience function:
str = xstrfmt(fmt, some, args);
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Propagate the error messages from the webserver better to the
client coming over the HTTP transport.
* jk/http-errors:
http: default text charset to iso-8859-1
remote-curl: reencode http error messages
strbuf: add strbuf_reencode helper
http: optionally extract charset parameter from content-type
http: extract type/subtype portion of content-type
t5550: test display of remote http error messages
t/lib-httpd: use write_script to copy CGI scripts
test-lib: preserve GIT_CURL_VERBOSE from the environment
This is a convenience wrapper around `reencode_string_len`
and `strbuf_attach`.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a convenience wrapper to call tolower on each
character of the string.
This makes config's lowercase() function obsolete, though
note that because we have a strbuf, we are careful to
operate over the whole strbuf, rather than assuming that a
NUL is the end-of-string.
We could continue to offer a pure-string lowercase, but
there would be no callers (in most pure-string cases, we
actually duplicate and lowercase the duplicate, for which we
have the xstrdup_tolower wrapper).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have two implementations of the same function; let's drop
that to one. We take the name from daemon.c, but the
implementation (which is just slightly more efficient) from
the config code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf_trim() strips whitespace from the end, then the beginning of
a strbuf. Those operations are duplicated in strbuf_rtrim() and
strbuf_ltrim().
Replace strbuf_trim() implementation with calls to strbuf_rtrim(),
then strbuf_ltrim().
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As starts_with() and ends_with() have been used to
replace prefixcmp() and suffixcmp() respectively,
we can now remove them.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prefixcmp() and suffixcmp() share the common "cmp" suffix that
typically are used to name functions that can be used for ordering,
but they can't, because they are not antisymmetric:
prefixcmp("foo", "foobar") < 0
prefixcmp("foobar", "foo") == 0
We in fact do not use these functions for ordering. Replace them
with functions that just check for equality.
Add starts_with() and end_with() that will be used to replace
prefixcmp() and suffixcmp(), respectively, as the first step. These
are named after corresponding functions/methods in programming
languages, like Java, Python and Ruby.
In vcs-svn/fast_export.c, there was already an ends_with() function
that did the same thing. Let's use the new one instead while at it.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Humanization of downloaded size is done in the same function as text
formatting in 'process.c'. The code cannot be reused easily elsewhere.
Separate text formatting from size simplification and make the
function public in strbuf so that it can easily be used by other
callers.
We now can use strbuf_humanise_bytes() for both downloaded size and
download speed calculation. One of the drawbacks is that speed will
now look like this when download is stalled: "0 bytes/s" instead of
"0 KiB/s".
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users do want to write a line that begin with a pound sign, #,
in their commit log message. Many tracking system recognise
a token of #<bugid> form, for example.
The support we offer these use cases is not very friendly to the end
users. They have a choice between
- Don't do it. Avoid such a line by rewrapping or indenting; and
- Use --cleanup=whitespace but remove all the hint lines we add.
Give them a way to set a custom comment char, e.g.
$ git -c core.commentchar="%" commit
so that they do not have to do either of the two workarounds.
[jc: although I started the topic, all the tests and documentation
updates, many of the call sites of the new strbuf_add_commented_*()
functions, and the change to git-submodule.sh scripted Porcelain are
from Ralf.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update imap-send to reuse xml quoting code from http-push codepath,
clean up some code, and fix a small bug.
* mh/unify-xml-in-imap-send-and-http-push:
wrap_in_html(): process message in bulk rather than line-by-line
wrap_in_html(): use strbuf_addstr_xml_quoted()
imap-send: change msg_data from storing (ptr, len) to storing strbuf
imap-send: correctly report errors reading from stdin
imap-send: store all_msgs as a strbuf
lf_to_crlf(): NUL-terminate msg_data::data
xml_entities(): use function strbuf_addstr_xml_quoted()
Add new function strbuf_add_xml_quoted()
Substantially the same code is present in http-push.c and imap-send.c,
so make a library function out of it.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Jeff King
Stefan Beller
Tobias Klauser
Jim Hill
Michael Haggerty
René Scharfe
Brian Gesiak
Christian Couder
Antoine Pelisse