* maint-2.5:
Git 2.5.5
Git 2.4.11
list-objects: pass full pathname to callbacks
list-objects: drop name_path entirely
list-objects: convert name_path to a strbuf
show_object_with_name: simplify by using path_name()
http-push: stop using name_path
tree-diff: catch integer overflow in combine_diff_path allocation
add helpers for detecting size_t overflow
* maint-2.4:
Git 2.4.11
list-objects: pass full pathname to callbacks
list-objects: drop name_path entirely
list-objects: convert name_path to a strbuf
show_object_with_name: simplify by using path_name()
http-push: stop using name_path
tree-diff: catch integer overflow in combine_diff_path allocation
add helpers for detecting size_t overflow
Bugfix patches were backported from the 'master' front to plug heap
corruption holes, to catch integer overflow in the computation of
pathname lengths, and to get rid of the name_path API. Both of
these would have resulted in writing over an under-allocated buffer
when formulating pathnames while tree traversal.
* jk/path-name-safety-2.4:
list-objects: pass full pathname to callbacks
list-objects: drop name_path entirely
list-objects: convert name_path to a strbuf
show_object_with_name: simplify by using path_name()
http-push: stop using name_path
tree-diff: catch integer overflow in combine_diff_path allocation
add helpers for detecting size_t overflow
Translate 22 new messages came from git.pot update in f1522b2
(l10n: git.pot: v2.8.0 round 2 (21 new, 1 removed)) and a5a4168
(l10n: git.pot: Add one new message for Git 2.8.0).
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Matthias Rüster <matthias.ruester@gmail.com>
* maint:
list-objects: pass full pathname to callbacks
list-objects: drop name_path entirely
list-objects: convert name_path to a strbuf
show_object_with_name: simplify by using path_name()
http-push: stop using name_path
tree-diff: catch integer overflow in combine_diff_path allocation
add helpers for detecting size_t overflow
Recent versions of GNU grep is pickier than before to decide if a
file is "binary" and refuse to give line-oriented hits when we
expect it to, unless explicitly told with "-a" option. As our
scripted Porcelains use sane_grep wrapper for line-oriented data,
even when the line may contain non-ASCII payload we took from
end-user data, use "grep -a" to implement sane_grep wrapper when
using an implementation of "grep" that takes the "-a" option.
* jc/sane-grep:
rebase-i: clarify "is this commit relevant?" test
sane_grep: pass "-a" if grep accepts it
The two alternative ways to spell "ssh://" transport have been
deprecated for a long time. The last mention of them has finally
removed from the documentation.
* cn/deprecate-ssh-git-url:
Disown ssh+git and git+ssh
URL canonicalization when full URLs are passed became broken
when using SVN::_Core::svn_dirent_canonicalize under SVN 1.7.
Ensure we canonicalize paths and URLs with appropriate functions
for each type from now on as the path/URL-agnostic
SVN::_Core::svn_path_canonicalize function is deprecated in SVN.
Tested with the following commands:
git svn init -T svn://svn.code.sf.net/p/squirrelmail/code/trunk
git svn init -b svn://svn.code.sf.net/p/squirrelmail/code/branches
Reported-by: Adam Dinwoodie <adam@dinwoodie.org>
http://mid.gmane.org/20160315162344.GM29016@dinwoodie.org
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* jk/path-name-safety-2.7:
list-objects: pass full pathname to callbacks
list-objects: drop name_path entirely
list-objects: convert name_path to a strbuf
show_object_with_name: simplify by using path_name()
http-push: stop using name_path
tree-diff: catch integer overflow in combine_diff_path allocation
add helpers for detecting size_t overflow
According to the documentation, full URLs can be specified in the `-T`
argument to `git svn init`. However, the canonicalization of such
arguments squashes together consecutive "/"s, which unsurprisingly
breaks http://, svn://, etc URLs. Add a failing test case to provide
evidence of that.
On systems where Subversion provides svn_path_canonicalize but not
svn_dirent_canonicalize (Subversion 1.6 and earlier?), this test passes,
as svn_path_canonicalize doesn't mangle the consecutive "/"s.
[ew: fixed whitespace]
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* jk/path-name-safety-2.6:
list-objects: pass full pathname to callbacks
list-objects: drop name_path entirely
list-objects: convert name_path to a strbuf
show_object_with_name: simplify by using path_name()
http-push: stop using name_path
tree-diff: catch integer overflow in combine_diff_path allocation
add helpers for detecting size_t overflow
* jk/path-name-safety-2.5:
list-objects: pass full pathname to callbacks
list-objects: drop name_path entirely
list-objects: convert name_path to a strbuf
show_object_with_name: simplify by using path_name()
http-push: stop using name_path
tree-diff: catch integer overflow in combine_diff_path allocation
add helpers for detecting size_t overflow
* jk/path-name-safety-2.4:
list-objects: pass full pathname to callbacks
list-objects: drop name_path entirely
list-objects: convert name_path to a strbuf
show_object_with_name: simplify by using path_name()
http-push: stop using name_path
tree-diff: catch integer overflow in combine_diff_path allocation
add helpers for detecting size_t overflow
When we find a blob at "a/b/c", we currently pass this to
our show_object_fn callbacks as two components: "a/b/" and
"c". Callbacks which want the full value then call
path_name(), which concatenates the two. But this is an
inefficient interface; the path is a strbuf, and we could
simply append "c" to it temporarily, then roll back the
length, without creating a new copy.
So we could improve this by teaching the callsites of
path_name() this trick (and there are only 3). But we can
also notice that no callback actually cares about the
broken-down representation, and simply pass each callback
the full path "a/b/c" as a string. The callback code becomes
even simpler, then, as we do not have to worry about freeing
an allocated buffer, nor rolling back our modification to
the strbuf.
This is theoretically less efficient, as some callbacks
would not bother to format the final path component. But in
practice this is not measurable. Since we use the same
strbuf over and over, our work to grow it is amortized, and
we really only pay to memcpy a few bytes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, we left name_path as a thin wrapper
around a strbuf. This patch drops it entirely. As a result,
every show_object_fn callback needs to be adjusted. However,
none of their code needs to be changed at all, because the
only use was to pass it to path_name(), which now handles
the bare strbuf.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "struct name_path" data is examined in only two places:
we generate it in process_tree(), and we convert it to a
single string in path_name(). Everyone else just passes it
through to those functions.
We can further note that process_tree() already keeps a
single strbuf with the leading tree path, for use with
tree_entry_interesting().
Instead of building a separate name_path linked list, let's
just use the one we already build in "base". This reduces
the amount of code (especially tricky code in path_name()
which did not check for integer overflows caused by deep
or large pathnames).
It is also more efficient in some instances. Any time we
were using tree_entry_interesting, we were building up the
strbuf anyway, so this is an immediate and obvious win
there. In cases where we were not, we trade off storing
"pathname/" in a strbuf on the heap for each level of the
path, instead of two pointers and an int on the stack (with
one pointer into the tree object). On a 64-bit system, the
latter is 20 bytes; so if path components are less than that
on average, this has lower peak memory usage. In practice
it probably doesn't matter either way; we are already
holding in memory all of the tree objects leading up to each
pathname, and for normal-depth pathnames, we are only
talking about hundreds of bytes.
This patch leaves "struct name_path" as a thin wrapper
around the strbuf, to avoid disrupting callbacks. We should
fix them, but leaving it out makes this diff easier to view.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git rev-list" shows an object with its associated path
name, it does so by walking the name_path linked list and
printing each component (stopping at any embedded NULs or
newlines).
We'd like to eventually get rid of name_path entirely in
favor of a single buffer, and dropping this custom printing
code is part of that. As a first step, let's use path_name()
to format the list into a single buffer, and print that.
This is strictly less efficient than the original, but it's
a temporary step in the refactoring; our end game will be to
get the fully formatted name in the first place.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Performing computations on size_t variables that we feed to
xmalloc and friends can be dangerous, as an integer overflow
can cause us to allocate a much smaller chunk than we
realized.
We already have unsigned_add_overflows(), but let's add
unsigned_mult_overflows() to that. Furthermore, rather than
have each site manually check and die on overflow, we can
provide some helpers that will:
- promote the arguments to size_t, so that we know we are
doing our computation in the same size of integer that
will ultimately be fed to xmalloc
- check and die on overflow
- return the result so that computations can be done in
the parameter list of xmalloc.
These functions are a lot uglier to use than normal
arithmetic operators (you have to do "st_add(foo, bar)"
instead of "foo + bar"). To at least limit the damage, we
also provide multi-valued versions. So rather than:
st_add(st_add(a, b), st_add(c, d));
you can write:
st_add4(a, b, c, d);
This isn't nearly as elegant as a varargs function, but it's
a lot harder to get it wrong. You don't have to remember to
add a sentinel value at the end, and the compiler will
complain if you get the number of arguments wrong. This
patch adds only the numbered variants required to convert
the current code base; we can easily add more later if
needed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The graph traversal code here passes along a name_path to
build up the pathname at which we find each blob. But we
never actually do anything with the resulting names, making
it a waste of code and memory.
This usage came in aa1dbc9 (Update http-push functionality,
2006-03-07), and originally the result was passed to
"add_object" (which stored it, but didn't really use it,
either). But we stopped using that function in 1f1e895 (Add
"named object array" concept, 2006-06-19) in favor of
storing just the objects themselves.
Moreover, the generation of the name in process_tree() is
buggy. It sticks "name" onto the end of the name_path linked
list, and then passes it down again as it recurses (instead
of "entry.path"). So it's a good thing this was unused, as
the resulting path for "a/b/c/d" would end up as "a/a/a/a".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A combine_diff_path struct has two "flex" members allocated
alongside the struct: a string to hold the pathname, and an
array of parent pointers. We use an "int" to compute this,
meaning we may easily overflow it if the pathname is
extremely long.
We can fix this by using size_t, and checking for overflow
with the st_add helper.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to find a good spot for testing clone with submodules, I
got confused where to add a new test file. There are both tests in t560*
as well as t57* both testing the clone command. t/README claims the
second digit is to indicate the command, which is inconsistent to the
current naming structure.
Rename all t57* tests to be in t56* to follow the pattern of the digits
as laid out in t/README.
It would have been less work to rename t56* => t57* because there are less
files, but the tests in t56* look more basic and I assumed the higher the
last digits the more complicated niche details are tested, so with the patch
now it looks more in order to me.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This enables the multiple-variant support for real. Multiple
conflicts of the same shape can have differences in contexts where
they appear, interfering the replaying of recorded resolution of one
conflict to another, and in such a case, their resolutions are
recorded as different variants under the same conflict ID.
We still need to adjust garbage collection codepaths for this
change, but the basic "replay" functionality is functional with
this change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the context of multiple identical conflicts are different, two
seemingly the same conflict resolution cannot be safely applied.
In such a case, at least we should be able to record these two
resolutions separately in the rerere database, and reuse them when
we see the same conflict later.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shape of the conflict in a path determines the conflict ID. The
preimage and postimage pair that was recorded for the conflict ID
previously may or may not replay well for the conflict we just saw.
Currently, we punt when the previous resolution does not cleanly
replay, but ideally we should then be able to record the currently
conflicted path by assigning a new 'variant', and then record the
resolution the user is going to make.
Introduce a mechanism to have more than one variant for a given
conflict ID; we do not actually assign any variant other than 0th
variant yet at this step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We record the preimage only when there is no directory to record the
conflict we encountered, i.e. when $GIT_DIR/rr-cache/$ID does not
exist. As the plan is to allow multiple <preimage,postimage> pairs
as variants for the same conflict ID eventually, this logic needs to
go.
As the first step in that direction, stop the "did we create the
directory? Then we record the preimage" logic. Instead, we record
if a preimage does not exist when we saw a conflict in a path. Also
make sure that we remove a stale postimage, which most likely is
totally unrelated to the resolution of this new conflict, when we
create a new preimage under $ID when $GIT_DIR/rr-cache/$ID already
exists.
In later patches, we will further update this logic to be "do we
have <preimage,postimage> pair that cleanly resolve the current
conflicts? If not, record a new preimage as a new variant", but
that does not happen at this stage yet.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If by some accident there is only $GIT_DIR/rr-cache/$ID directory
existed, we wouldn't have recorded a preimage for a conflict that
is newly encountered, which would mean after a manual resolution,
we wouldn't have recorded it by storing the postimage, because the
logic used to be "if there is no rr-cache/$ID directory, then we are
the first so record the preimage". Instead, record preimage if we
do not have one.
In addition, if there is only $GIT_DIR/rr-cache/$ID/postimage
without corresponding preimage, we would have tried to call into
merge() and punted.
These would have been a situation frustratingly hard to recover
from.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Map a P4 user to a specific name and email address in Git with the
"git-p4.mapUser" config. The config value must be a string adhering
to the format "p4user = First Lastname <email@address.com>".
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Ralf Thielow
Eric Wong
Adam Dinwoodie
Jeff King
Stefan Beller
Jiang Xin
Changwoo Ryu
Jean-Noel Avila
Peter Krefting
Dimitriy Ryazantcev
Lars Schneider