"git config" failed to update the configuration file when the
underlying filesystem is incapable of renaming a file that is still
open.
* kb/config-unmap-before-renaming:
config.c: fix writing config files on Windows network shares
Renaming to an existing file doesn't work on Windows network shares if the
target file is open.
munmap() the old config file before commit_lock_file.
Signed-off-by: Karsten Blees <blees@dcon.de>
Acked-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration reader/writer uses mmap(2) interface to access
the files; when we find a directory, it barfed with "Out of memory?".
* jk/diagnose-config-mmap-failure:
xmmap(): drop "Out of memory?"
config.c: rewrite ENODEV into EISDIR when mmap fails
config.c: avoid xmmap error messages
config.c: fix mmap leak when writing config
read-cache.c: drop PROT_WRITE from mmap of index
The configuration reader/writer uses mmap(2) interface to access
the files; when we find a directory, it barfed with "Out of memory?".
* jk/diagnose-config-mmap-failure:
xmmap(): drop "Out of memory?"
config.c: rewrite ENODEV into EISDIR when mmap fails
config.c: avoid xmmap error messages
config.c: fix mmap leak when writing config
read-cache.c: drop PROT_WRITE from mmap of index
Code clean-up for xdg configuration path support.
* pt/xdg-config-path:
path.c: remove home_config_paths()
git-config: replace use of home_config_paths()
git-commit: replace use of home_config_paths()
credential-store.c: replace home_config_paths() with xdg_config_home()
dir.c: replace home_config_paths() with xdg_config_home()
attr.c: replace home_config_paths() with xdg_config_home()
path.c: implement xdg_config_home()
t0302: "unreadable" test needs POSIXPERM
t0302: test credential-store support for XDG_CONFIG_HOME
git-credential-store: support XDG_CONFIG_HOME
git-credential-store: support multiple credential files
If we try to mmap a directory, we'll get ENODEV. This
translates to "no such device" for the user, which is not
very helpful. Since we've just fstat()'d the file, we can
easily check whether the problem was a directory to give a
better message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config-writing code uses xmmap to map the existing
config file, which will die if the map fails. This has two
downsides:
1. The error message is not very helpful, as it lacks any
context about the file we are mapping:
$ mkdir foo
$ git config --file=foo some.key value
fatal: Out of memory? mmap failed: No such device
2. We normally do not die in this code path; instead, we'd
rather report the error and return an appropriate exit
status (which is part of the public interface
documented in git-config.1).
This patch introduces a "gentle" form of xmmap which lets us
produce our own error message. We do not want to use mmap
directly, because we would like to use the other
compatibility elements of xmmap (e.g., handling 0-length
maps portably).
The end result is:
$ git.compile config --file=foo some.key value
error: unable to mmap 'foo': No such device
$ echo $?
3
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We mmap the existing config file, but fail to unmap it if we
hit an error. The function already has a shared exit path,
so we can fix this by moving the mmap pointer to the
function scope and clearing it in the shared exit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the codepaths that read .gitignore and .gitattributes files
that these files encoded in UTF-8 may have UTF-8 BOM marker at the
beginning; this makes it in line with what we do for configuration
files already.
* cn/bom-in-gitignore:
attr: skip UTF8 BOM at the beginning of the input file
config: use utf8_bom[] from utf.[ch] in git_parse_source()
utf8-bom: introduce skip_utf8_bom() helper
add_excludes_from_file: clarify the bom skipping logic
dir: allow a BOM at the beginning of exclude files
Code clean-up for xdg configuration path support.
* pt/xdg-config-path:
path.c: remove home_config_paths()
git-config: replace use of home_config_paths()
git-commit: replace use of home_config_paths()
credential-store.c: replace home_config_paths() with xdg_config_home()
dir.c: replace home_config_paths() with xdg_config_home()
attr.c: replace home_config_paths() with xdg_config_home()
path.c: implement xdg_config_home()
An earlier rewrite to use strbuf_getwholeline() instead of fgets(3)
to read packed-refs file revealed that the former is unacceptably
inefficient.
* jk/reading-packed-refs:
t1430: add another refs-escape test
read_packed_refs: avoid double-checking sane refs
strbuf_getwholeline: use getdelim if it is available
strbuf_getwholeline: avoid calling strbuf_grow
strbuf_addch: avoid calling strbuf_grow
config: use getc_unlocked when reading from file
strbuf_getwholeline: use getc_unlocked
git-compat-util: add fallbacks for unlocked stdio
strbuf_getwholeline: use getc macro
Since home_config_paths() combines distinct functionality already
implemented by expand_user_path() and xdg_config_home(), and hides the
home config file path ~/.gitconfig. Make the code more explicit by
replacing the use of home_config_paths() with expand_user_path() and
xdg_config_home().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the codepaths that read .gitignore and .gitattributes files
that these files encoded in UTF-8 may have UTF-8 BOM marker at the
beginning; this makes it in line with what we do for configuration
files already.
* cn/bom-in-gitignore:
attr: skip UTF8 BOM at the beginning of the input file
config: use utf8_bom[] from utf.[ch] in git_parse_source()
utf8-bom: introduce skip_utf8_bom() helper
add_excludes_from_file: clarify the bom skipping logic
dir: allow a BOM at the beginning of exclude files
Because the function reads one character at the time, unfortunately
we cannot use the easier skip_utf8_bom() helper, but at least we do
not have to duplicate the constant string this way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We read config files character-by-character from a stdio
handle using fgetc(). This incurs significant locking
overhead, even though we know that only one thread can
possibly access the handle. We can speed this up by taking
the lock ourselves, and then using getc_unlocked to read
each character.
On a silly pathological case:
perl -le '
print "[core]";
print "key$_ = value$_" for (1..1000000)
' >input
git config -f input core.key1
this dropped the time to run git-config from:
real 0m0.263s
user 0m0.260s
sys 0m0.000s
to:
real 0m0.159s
user 0m0.152s
sys 0m0.004s
for a savings of 39%. Most config files are not this big,
but the savings should be proportional to the size of the
file (i.e., we always save 39%, just of a much smaller
number).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reading configuration from a blob object, when it ends with a lone
CR, use to confuse the configuration parser.
* jk/config-no-ungetc-eof:
config_buf_ungetc: warn when pushing back a random character
config: do not ungetc EOF
"git blame HEAD -- missing" failed to correctly say "HEAD" when it
tried to say "No such path 'missing' in HEAD".
* jk/blame-commit-label:
blame.c: fix garbled error message
use xstrdup_or_null to replace ternary conditionals
builtin/commit.c: use xstrdup_or_null instead of envdup
builtin/apply.c: use xstrdup_or_null instead of null_strdup
git-compat-util: add xstrdup_or_null helper
Our config code simulates a stdio stream around a buffer,
but our fake ungetc() does not behave quite like the real
one. In particular, we only rewind the position by one
character, but do _not_ actually put the character from the
caller into position.
It turns out that this does not matter, because we only ever
push back the character we just read. In other words, such
an assignment would be a noop. But because the function is
called ungetc, and because it takes a character parameter,
it is a mistake waiting to happen.
Actually assigning the character into the buffer would be
ideal, but our pointer is actually a "const" copy of the
buffer. We do not know who the real owner of the buffer is
in this code, and would not want to munge their contents.
Instead, we can simply add an assertion that matches what
the current caller does, and will let us know if new callers
are added that violate the contract.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are parsing a config value, if we see a carriage
return, we fgetc the next character to see if it is a
line feed (in which case we silently drop the CR). If it
isn't, we then ungetc the character, and take the literal
CR.
But we never check whether we in fact got a character at
all. If the config file ends in CR, we will get EOF here,
and try to ungetc EOF. This works OK for a real stdio
stream. The ungetc returns an error, and the next fgetc will
then return EOF again.
However, our custom buffer-based stream is not so fortunate.
It happily rewinds the position of the stream by one
character, ignoring the fact that we fed it EOF. The next
fgetc call returns the final CR again, over and over, and we
end up in an infinite loop.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces "x ? xstrdup(x) : NULL" with xstrdup_or_null(x).
The change is fairly mechanical, with the exception of
resolve_refdup, which can eliminate a temporary variable.
There are still a few hits grepping for "?.*xstrdup", but
these are of slightly different forms and cannot be
converted (e.g., "x ? xstrdup(x->foo) : NULL").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for NTFS
and FAT32; let's use it in verify_path().
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on NTFS nor FAT32.
In practice this probably doesn't matter, though, as
the restricted names are rather obscure and almost
certainly would never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectNTFS config
option. Though this is expected to be most useful on Windows,
we allow it to be set everywhere, as NTFS may be mounted on
other platforms. The variable does default to on for Windows,
though.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for HFS+;
let's use it in verify_path.
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on HFS+. In practice
this probably doesn't matter, though, as the restricted
names are rather obscure and almost certainly would
never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectHFS config
option. Though this is expected to be most useful on OS X,
we allow it to be set everywhere, as HFS+ may be mounted on
other platforms. The variable does default to on for OS X,
though.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using abs() on long values can cause truncation, so use labs() instead.
Reported by Clang 3.5 (-Wabsolute-value, enabled by -Wall).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The lockfile API and its users have been cleaned up.
* mh/lockfile: (38 commits)
lockfile.h: extract new header file for the functions in lockfile.c
hold_locked_index(): move from lockfile.c to read-cache.c
hold_lock_file_for_append(): restore errno before returning
get_locked_file_path(): new function
lockfile.c: rename static functions
lockfile: rename LOCK_NODEREF to LOCK_NO_DEREF
commit_lock_file_to(): refactor a helper out of commit_lock_file()
trim_last_path_component(): replace last_path_elm()
resolve_symlink(): take a strbuf parameter
resolve_symlink(): use a strbuf for internal scratch space
lockfile: change lock_file::filename into a strbuf
commit_lock_file(): use a strbuf to manage temporary space
try_merge_strategy(): use a statically-allocated lock_file object
try_merge_strategy(): remove redundant lock_file allocation
struct lock_file: declare some fields volatile
lockfile: avoid transitory invalid states
git_config_set_multivar_in_file(): avoid call to rollback_lock_file()
dump_marks(): remove a redundant call to rollback_lock_file()
api-lockfile: document edge cases
commit_lock_file(): rollback lock file on failure to rename
...
When running a required clean filter, we do not have to mmap the
original before feeding the filter. Instead, stream the file
contents directly to the filter and process its output.
* sp/stream-clean-filter:
sha1_file: don't convert off_t to size_t too early to avoid potential die()
convert: stream from fd to required clean filter to reduce used address space
copy_fd(): do not close the input file descriptor
mmap_limit: introduce GIT_MMAP_LIMIT to allow testing expected mmap size
memory_limit: use git_env_ulong() to parse GIT_ALLOC_LIMIT
config.c: add git_env_ulong() to parse environment variable
convert: drop arguments other than 'path' from would_convert_to_git()
Move the interface declaration for the functions in lockfile.c from
cache.h to a new file, lockfile.h. Add #includes where necessary (and
remove some redundant includes of cache.h by files that already
include builtin.h).
Move the documentation of the lock_file state diagram from lockfile.c
to the new header file.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For now, we still make sure to allocate at least PATH_MAX characters
for the strbuf because resolve_symlink() doesn't know how to expand
the space for its return value. (That will be fixed in a moment.)
Another alternative would be to just use a strbuf as scratch space in
lock_file() but then store a pointer to the naked string in struct
lock_file. But lock_file objects are often reused. By reusing the
same strbuf, we can avoid having to reallocate the string most times
when a lock_file object is reused.
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After commit_lock_file() is called, then the lock_file object is
necessarily either committed or rolled back. So there is no need to
call rollback_lock_file() again in either of these cases.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git config --add section.var val" used to lose existing
section.var whose value was an empty string.
* ta/config-add-to-empty-or-true-fix:
config: avoid a funny sentinel value "a^"
make config --add behave correctly for empty and NULL values
"git config --add section.var val" used to lose existing
section.var whose value was an empty string.
* ta/config-add-to-empty-or-true-fix:
config: avoid a funny sentinel value "a^"
make config --add behave correctly for empty and NULL values
Introduce CONFIG_REGEX_NONE as a more explicit sentinel value to say
"we do not want to replace any existing entry" and use it in the
implementation of "git config --add".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new caching config-set API in git_config() calls.
* ta/config-set-1:
add tests for `git_config_get_string_const()`
add a test for semantic errors in config files
rewrite git_config() to use the config-set API
config: add `git_die_config()` to the config-set API
change `git_config()` return value to void
add line number and file name info to `config_set`
config.c: fix accuracy of line number in errors
config.c: mark error and warnings strings for translation
"git -c section.var command" and "git -c section.var= command"
should pass the configuration differently (the former should be
a boolean true, the latter should be an empty string).
* jk/command-line-config-empty-string:
config: teach "git -c" to recognize an empty string
Add in-core caching layer to let us avoid reading the same
configuration files number of times.
* ta/config-set:
test-config: add tests for the config_set API
add `config_set` API for caching config-like files
Instead of using skip_prefix() to check the first part of the string
and then strcmp() to check the rest, simply use strcmp() to check the
whole string.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new function parses an integeral value that fits in unsigned
long in human readable form, i.e. possibly with unit suffix, e.g.
10k = 10240, etc., from an environment variable. Parsing of
GIT_MMAP_LIMIT and GIT_ALLOC_LIMIT will use it in later patches.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently if we have a config file like,
[foo]
baz
bar =
and we try something like, "git config --add foo.baz roll", Git will
segfault. Moreover, for "git config --add foo.bar roll", it will
overwrite the original value instead of appending after the existing
empty value.
The problem lies with the regexp used for simulating --add in
`git_config_set_multivar_in_file()`, "^$", which in ideal case should
not match with any string but is true for empty strings. Instead use a
regexp like "a^" which can not be true for any string, empty or not.
For removing the segfault add a check for NULL values in `matches()` in
config.c.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Of all the functions in `git_config*()` family, `git_config()` has the
most invocations in the whole code base. Each `git_config()` invocation
causes config file rereads which can be avoided using the config-set API.
Use the config-set API to rewrite `git_config()` to use the config caching
layer to avoid config file rereads on each invocation during a git process
lifetime. First invocation constructs the cache, and after that for each
successive invocation, `git_config()` feeds values from the config cache
instead of rereading the configuration files.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add `git_die_config` that dies printing the line number and the file name
of the highest priority value for the configuration variable `key`. A custom
error message is also printed before dying, specified by the caller, which can
be skipped if `err` argument is set to NULL.
It has usage in non-callback based config value retrieval where we can
raise an error and die if there is a semantic error.
For example,
if (!git_config_get_value(key, &value)){
if (!strcmp(value, "foo"))
git_config_die(key, "value: `%s` is illegal", value);
else
/* do work */
}
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently `git_config()` returns an integer signifying an error code.
During rewrites of the function most of the code was shifted to
`git_config_with_options()`. `git_config_with_options()` normally
returns positive values if its `config_source` parameter is set as NULL,
as most errors are fatal, and non-fatal potential errors are guarded
by "if" statements that are entered only when no error is possible.
Still a negative value can be returned in case of race condition between
`access_or_die()` & `git_config_from_file()`. Also, all callers of
`git_config()` ignore the return value except for one case in branch.c.
Change `git_config()` return value to void and make it die if it receives
a negative value from `git_config_with_options()`.
Original-patch-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Store file name and line number for each key-value pair in the cache
during parsing of the configuration files.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a callback returns a negative value to `git_config*()` family,
they call `die()` while printing the line number and the file name.
Currently the printed line number is off by one, thus printing the
wrong line number.
Make `linenr` point to the line we just parsed during the call
to callback to get accurate line number in error messages.
Commit-message-by: Tanay Abhra <tanayabh@gmail.com>
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a config file, you can do:
[foo]
bar
to turn the "foo.bar" boolean flag on, and you can do:
[foo]
bar=
to set "foo.bar" to the empty string. However, git's "-c"
parameter treats both:
git -c foo.bar
and
git -c foo.bar=
as the boolean flag, and there is no way to set a variable
to the empty string. This patch enables the latter form to
do that.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently `git_config()` uses a callback mechanism and file rereads for
config values. Due to this approach, it is not uncommon for the config
files to be parsed several times during the run of a git program, with
different callbacks picking out different variables useful to themselves.
Add a `config_set`, that can be used to construct an in-memory cache for
config-like files that the caller specifies (i.e., files like `.gitmodules`,
`~/.gitconfig` etc.). Add two external functions `git_configset_get_value`
and `git_configset_get_value_multi` for querying from the config sets.
`git_configset_get_value` follows `last one wins` semantic (i.e. if there
are multiple matches for the queried key in the files of the configset the
value returned will be the last entry in `value_list`).
`git_configset_get_value_multi` returns a list of values sorted in order of
increasing priority (i.e. last match will be at the end of the list). Add
type specific query functions like `git_configset_get_bool` and similar.
Add a default `config_set`, `the_config_set` to cache all key-value pairs
read from usual config files (repo specific .git/config, user wide
~/.gitconfig, XDG config and the global /etc/gitconfig). `the_config_set`
is populated using `git_config()`.
Add two external functions `git_config_get_value` and
`git_config_get_value_multi` for querying in a non-callback manner from
`the_config_set`. Also, add type specific query functions that are
implemented as a thin wrapper around the `config_set` API.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we see the core.commentchar config option, we extract
the string with git_config_string, which does two things:
1. It complains via config_error_nonbool if there is no
string value.
2. It makes a copy of the string.
Since we immediately parse the string into its
single-character value, we only care about (1). And in fact
(2) is a detriment, as it means we leak the copy. Instead,
let's just check the pointer value ourselves, and parse
directly from the const string we already have.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replaces the only two uses of fchmod() with chmod() because the
former does not work on Windows port and because luckily we can.
* kb/avoid-fchmod-for-now:
config: use chmod() instead of fchmod()
There is no fchmod() on native Windows platforms (MinGW and MSVC), and the
equivalent Win32 API (SetFileInformationByHandle) requires Windows Vista.
Use chmod() instead.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "mailmap.file" configuration option did not support the tilde
expansion (i.e. ~user/path and ~/path).
* ow/config-mailmap-pathname:
config: respect '~' and '~user' in mailmap.file
The skip_prefix() function returns a pointer to the content
past the prefix, or NULL if the prefix was not found. While
this is nice and simple, in practice it makes it hard to use
for two reasons:
1. When you want to conditionally skip or keep the string
as-is, you have to introduce a temporary variable.
For example:
tmp = skip_prefix(buf, "foo");
if (tmp)
buf = tmp;
2. It is verbose to check the outcome in a conditional, as
you need extra parentheses to silence compiler
warnings. For example:
if ((cp = skip_prefix(buf, "foo"))
/* do something with cp */
Both of these make it harder to use for long if-chains, and
we tend to use starts_with() instead. However, the first line
of "do something" is often to then skip forward in buf past
the prefix, either using a magic constant or with an extra
strlen(3) (which is generally computed at compile time, but
means we are repeating ourselves).
This patch refactors skip_prefix() to return a simple boolean,
and to provide the pointer value as an out-parameter. If the
prefix is not found, the out-parameter is untouched. This
lets you write:
if (skip_prefix(arg, "foo ", &arg))
do_foo(arg);
else if (skip_prefix(arg, "bar ", &arg))
do_bar(arg);
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mailmap.file configuration names a pathname, hence should honor
~/path and ~user/path as its value.
* ow/config-mailmap-pathname:
config: respect '~' and '~user' in mailmap.file
xcalloc() takes two arguments: the number of elements and their size.
config.c includes several calls to xcalloc() that pass the arguments
in reverse order: the size of a struct lock_file*, followed by the
number to allocate.
Rearrange them so they are in the correct order.
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_config_string() does not handle '~' and '~user' as part of the
value. Using git_config_pathname() fixes this.
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a convenience wrapper to call tolower on each
character of the string.
This makes config's lowercase() function obsolete, though
note that because we have a strbuf, we are careful to
operate over the whole strbuf, rather than assuming that a
NUL is the end-of-string.
We could continue to offer a pure-string lowercase, but
there would be no callers (in most pure-string cases, we
actually duplicate and lowercase the duplicate, for which we
have the xstrdup_tolower wrapper).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When core.commentChar is "auto", the comment char starts with '#' as
in default but if it's already in the prepared message, find another
char in a small subset. This should stop surprises because git strips
some lines unexpectedly.
Note that git is not smart enough to recognize '#' as the comment char
in custom templates and convert it if the final comment char is
different. It thinks '#' lines in custom templates as part of the
commit message. So don't use this with custom templates.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't support comment _strings_ (at least not yet). And multi-byte
character encoding could also be misinterpreted.
The test with two commas is updated because it violates this. It's
added with the patch that introduces core.commentChar in eff80a9
(Allow custom "comment char" - 2013-01-16). It's not clear to me _why_
that behavior is wanted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users may already store sensitive data such as imap.pass in
.git/config; making the file world-readable when "git config"
is called to edit means their password would be compromised
on a shared system.
[v2: updated for section renames, as noted by Junio]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can help avoid -Wuninitialized false positives in
git_config_int and git_config_ulong, as the compiler now
knows that we do not return "ret" if we hit the error
codepath.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
include.path variable (or any variable that expects a path that can
use ~username expansion) in the configuration file is not a boolean,
but the code failed to check it.
* jk/config-path-include-fix:
handle_path_include: don't look at NULL value
expand_user_path: do not look at NULL path
"git config" learned to read from the standard input when "-" is
given as the value to its "--file" parameter (attempting an
operation to update the configuration in the standard input of
course is rejected).
* ks/config-file-stdin:
config: teach "git config --file -" to read from the standard input
config: change git_config_with_options() interface
builtin/config.c: rename check_blob_write() -> check_write()
config: disallow relative include paths from blobs
include.path variable (or any variable that expects a path that can
use ~username expansion) in the configuration file is not a
boolean, but the code failed to check it.
* jk/config-path-include-fix:
handle_path_include: don't look at NULL value
expand_user_path: do not look at NULL path
The patch extends git config --file interface to allow read config from
stdin.
Editing stdin or setting value in stdin is an error.
Include by absolute path is allowed in stdin config, but not by relative
path.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're going to have more options for config source.
Let's alter git_config_with_options() interface to accept struct with
all source options.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we see a relative config include like:
[include]
path = foo
we make it relative to the containing directory of the file
that contains the snippet. This makes no sense for config
read from a blob, as it is not on the filesystem. Something
like "HEAD:some/path" could have a relative path within the
tree, but:
1. It would not be part of include.path, which explicitly
refers to the filesystem.
2. It would need different parsing rules anyway to
determine that it is a tree path.
The current code just uses the "name" field, which is wrong.
Let's split that into "name" and "path" fields, use the
latter for relative includes, and fill in only the former
for blobs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we see config like:
[include]
path
the expand_user_path helper notices that the config value is
empty, but we then dereference NULL while printing the error
message (glibc will helpfully print "(null)" for us here,
but we cannot rely on that).
$ git -c include.path rev-parse
error: Could not expand include path '(null)'
fatal: unable to parse command-line config
Instead of tweaking our message, let's actually use
config_error_nonbool to match other config variables that
expect a value:
$ git -c include.path rev-parse
error: Missing value for 'include.path'
fatal: unable to parse command-line config
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a few duplicate implementations of prefix/suffix comparison
functions, and rename them to starts_with and ends_with.
* cc/starts-n-ends-with:
replace {pre,suf}fixcmp() with {starts,ends}_with()
strbuf: introduce starts_with() and ends_with()
builtin/remote: remove postfixcmp() and use suffixcmp() instead
environment: normalize use of prefixcmp() by removing " != 0"
git-config used a static match array to hold the matches we want to
unset/replace when using --unset or --replace-all. Use a
variable-sized array instead.
This in particular fixes the symptoms git-svn had when storing large
numbers of svn-remote.*.added-placeholder entries in the config file.
While the tests are rather more paranoid than just --unset and
--replace-all, the other operations already worked. Indeed git-svn's
usage only breaks the first time *after* creating so many entries,
when it wants to unset and re-add them all.
Reported-by: Jess Hottenstein <jess.hottenstein@gmail.com>
Signed-off-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7192777 refactors git_parse_ulong, which is public, into a more
generic function. But since we kept the git_parse_ulong wrapper, only
that part needs to be public; nobody outside the file calls the
lower-level git_parse_unsigned.
Noticed with sparse. ("'git_parse_unsigned' was not declared. Should
it be static?")
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Explained-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
"git config" did not provide a way to set or access numbers larger
than a native "int" on the platform; it now provides 64-bit signed
integers on all platforms.
* jk/config-int-range-check:
git-config: always treat --int as 64-bit internally
config: make numeric parsing errors more clear
config: set errno in numeric git_parse_* functions
config: properly range-check integer values
config: factor out integer parsing from range checks
When you run "git config --int", the maximum size of integer
you get depends on how git was compiled, and what it
considers to be an "int".
This is almost useful, because your scripts calling "git
config" will behave similarly to git internally. But relying
on this is dubious; you have to actually know how git treats
each value internally (e.g., int versus unsigned long),
which is not documented and is subject to change. And even
if you know it is "unsigned long", we do not have a
git-config option to match that behavior.
Furthermore, you may simply be asking git to store a value
on your behalf (e.g., configuration for a hook). In that
case, the relevant range check has nothing at all to do with
git, but rather with whatever scripting tools you are using
(and git has no way of knowing what the appropriate range is
there).
Not only is the range check useless, but it is actively
harmful, as there is no way at all for scripts to look
at config variables with large values. For instance, one
cannot reliably get the value of pack.packSizeLimit via
git-config. On an LP64 system, git happily uses a 64-bit
"unsigned long" internally to represent the value, but the
script cannot read any value over 2G.
Ideally, the "--int" option would simply represent an
arbitrarily large integer. For practical purposes, however,
a 64-bit integer is large enough, and is much easier to
implement (and if somebody overflows it, we will still
notice the problem, and not simply return garbage).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we try to parse an integer config argument and get a
number outside of the representable range, we die with the
cryptic message: "bad config value for '%s'".
We can improve two things:
1. Show the value that produced the error (e.g., bad
config value '3g' for 'foo.bar').
2. Mention the reason the value was rejected (e.g.,
"invalid unit" versus "out of range").
A few tests need to be updated with the new output, but that
should not be representative of real-world breakage, as
scripts should not be depending on the exact text of our
stderr output, which is subject to i18n anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are parsing an integer or unsigned long, we use
the strto*max functions, which properly set errno to ERANGE
if we get a large value. However, we also do further range
checks after applying our multiplication factor, but do not
set ERANGE. This means that a caller cannot tell if an error
was caused by ERANGE or if the input was simply not a valid
number.
This patch teaches git_parse_signed and git_parse_unsigned to set
ERANGE for range errors, and EINVAL for other errors, so that the
caller can reliably tell these cases apart.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we look at a config value as an integer using the
git_config_int function, we carefully range-check the value
we get and complain if it is out of our range. But the range
we compare to is that of a "long", which we then cast to an
"int" in the function's return value. This means that on
systems where "int" and "long" have different sizes (e.g.,
LP64 systems), we may pass the range check, but then return
nonsense by truncating the value as we cast it to an int.
We can solve this by converting git_parse_long into
git_parse_int, and range-checking the "int" range. Nobody
actually cared that we used a "long" internally, since the
result was truncated anyway. And the only other caller of
git_parse_long is git_config_maybe_bool, which should be
fine to just use int (though we will now forbid out-of-range
nonsense like setting "merge.ff" to "10g" to mean "true",
which is probably a good thing).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are parsing integers for config, we use an intmax_t
(or uintmax_t) internally, and then check against the size
of our result type at the end. We can parameterize the
maximum representable value, which will let us re-use the
parsing code for a variety of range checks.
Unfortunately, we cannot combine the signed and unsigned
parsing functions easily, as we have to rely on the signed
and unsigned C types internally.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to C99, section 7.1.4:
Any function declared in a header may be additionally
implemented as a function-like macro defined in the
header.
Therefore calling our struct member function pointer "fgetc"
may run afoul of unwanted macro expansion when we call:
char c = cf->fgetc(cf);
This turned out to be a problem on uclibc, which defines
fgetc as a macro and causes compilation failure.
The standard suggests fixing this in a few ways:
1. Using extra parentheses to inhibit the function-like
macro expansion. E.g., "(cf->fgetc)(cf)". This is
undesirable as it's ugly, and each call site needs to
remember to use it (and on systems without the macro,
forgetting will compile just fine).
2. Using #undef (because a conforming implementation must
also be providing fgetc as a function). This is
undesirable because presumably the implementation was
using the macro for a performance benefit, and we are
dropping that optimization.
Instead, we can simply use non-colliding names.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow configuration data to be read from in-tree blob objects,
which would help working in a bare repository and submodule
updates.
* hv/config-from-blob:
do not die when error in config parsing of buf occurs
teach config --blob option to parse config from database
config: make parsing stack struct independent from actual data source
config: drop cf validity check in get_next_char()
config: factor out config file stack management
If a config parsing error in a file occurs we can die and let the user
fix the issue. This is different for the buf parsing function since it
can be used to parse blobs of .gitmodules files. If a parsing error
occurs here we should proceed since otherwise a database containing such
an error in a single revision could be rendered unusable.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used to read configuration values directly from git's
database. For example it is useful for reading to be checked out
.gitmodules files directly from the database.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To simplify adding other sources we extract all functions needed for
parsing into a list of callbacks. We implement those callbacks for the
current file parsing. A new source can implement its own set of callbacks.
Instead of storing the concrete FILE pointer for parsing we store a void
pointer. A new source can use this to store its custom data.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The global variable cf is set with an initialized value in all codepaths before
calling this function.
The complete call graph looks like this:
git_config_from_file
-> do_config_from
-> git_parse_file
-> get_next_char
-> get_value
-> get_next_char
-> parse_value
-> get_next_char
-> get_base_var
-> get_next_char
-> get_extended_base_var
-> get_next_char
The variable is initialized in do_config_from.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because a config callback may start parsing a new file, the
global context regarding the current config file is stored
as a stack. Currently we only need to manage that stack from
git_config_from_file. Let's factor it out to allow new
sources of config data.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
5f44324 (core: log offset pack data accesses happened - 2011-07-06)
provides a way to observe pack access patterns via a config
switch. Setting an environment variable looks more obvious than a
config var, especially when you just need to _observe_, and more
inline with other tracing knobs we have.
Document it as it may be useful for remote troubleshooting.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration variable core.checkstat was advertised in the
documentation but the code expected core.statinfo instead.
For now, we accept both core.checkstat and core.statinfo, but the
latter will be removed in the longer term.
* jc/core-checkstat:
deprecate core.statinfo at Git 2.0 boundary
c08e4d5b5c (Enable minimal stat checking, 2013-01-22) advertised
the configuration variable core.checkstat in the documentation and
its log message, but the code expected core.statinfo instead.
For now, add core.checkstat, and warn people who have core.statinfo
in their configuration file that we will remove it in Git 2.0.
Noticed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The changes v1.7.12.1~2^2~4 (config: warn on inaccessible files,
2012-08-21) and v1.8.1.1~22^2~2 (config: treat user and xdg config
permission problems as errors, 2012-10-13) were intended to prevent
important configuration (think "[transfer] fsckobjects") from being
ignored when the configuration is unintentionally unreadable (for
example with EIO on a flaky filesystem, or with ENOMEM due to a DoS
attack). Usually ~/.gitconfig and ~/.config/git are readable by the
current user, and if they aren't then it would be easy to fix those
permissions, so the damage from adding this check should have been
minimal.
Unfortunately the access() check often trips when git is being run as
a server. A daemon (such as inetd or git-daemon) starts as "root",
creates a listening socket, and then drops privileges, meaning that
when git commands are invoked they cannot access $HOME and die with
fatal: unable to access '/root/.config/git/config': Permission denied
Any patch to fix this would have one of three problems:
1. We annoy sysadmins who need to take an extra step to handle HOME
when dropping privileges (the current behavior, or any other
proposal that they have to opt into).
2. We annoy sysadmins who want to set HOME when dropping privileges,
either by making what they want to do impossible, or making them
set an extra variable or option to accomplish what used to work
(e.g., a patch to git-daemon to set HOME when --user is passed).
3. We loosen the check, so some cases which might be noteworthy are
not caught.
This patch is of type (3).
Treat user and xdg configuration that are inaccessible due to
permissions (EACCES) as though no user configuration was provided at
all.
An alternative method would be to check if $HOME is readable, but that
would not help in cases where the user who dropped privileges had a
globally readable HOME with only .config or .gitconfig being private.
This does not change the behavior when /etc/gitconfig or .git/config
is unreadable (since those are more serious configuration errors),
nor when ~/.gitconfig or ~/.config/git is unreadable due to problems
other than permissions.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Configuration parsing for tar.* configuration variables were
broken. Introduce a new config-keyname parser API to make the
callers much less error prone.
* jk/config-parsing-cleanup:
reflog: use parse_config_key in config callback
help: use parse_config_key for man config
submodule: simplify memory handling in config parsing
submodule: use parse_config_key when parsing config
userdiff: drop parse_driver function
convert some config callbacks to parse_config_key
archive-tar: use parse_config_key when parsing config
config: add helper function for parsing key names
Allow a configuration variable core.commentchar to customize the
character used to comment out the hint lines in the edited text from
the default '#'.
* jc/custom-comment-char:
Allow custom "comment char"
The config callback functions get keys of the general form:
section.subsection.key
(where the subsection may be contain arbitrary data, or may
be missing). For matching keys without subsections, it is
simple enough to call "strcmp". Matching keys with
subsections is a little more complicated, and each callback
does it in an ad-hoc way, usually involving error-prone
pointer arithmetic.
Let's provide a helper that keeps the pointer arithmetic all
in one place.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Specifically the fields uid, gid, ctime, ino and dev are set to zero
by JGit. Other implementations, eg. Git in cygwin are allegedly also
somewhat incompatible with Git For Windows and on *nix platforms
the resolution of the timestamps may differ.
Any stat checking by git will then need to check content, which may
be very slow, particularly on Windows. Since mtime and size
is typically enough we should allow the user to tell git to avoid
checking these fields if they are set to zero in the index.
This change introduces a core.checkstat config option where the
the user can select to check all fields (default), or just size
and the whole second part of mtime (minimal).
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users do want to write a line that begin with a pound sign, #,
in their commit log message. Many tracking system recognise
a token of #<bugid> form, for example.
The support we offer these use cases is not very friendly to the end
users. They have a choice between
- Don't do it. Avoid such a line by rewrapping or indenting; and
- Use --cleanup=whitespace but remove all the hint lines we add.
Give them a way to set a custom comment char, e.g.
$ git -c core.commentchar="%" commit
so that they do not have to do either of the two workarounds.
[jc: although I started the topic, all the tests and documentation
updates, many of the call sites of the new strbuf_add_commented_*()
functions, and the change to git-submodule.sh scripted Porcelain are
from Ralf.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Deal with a situation where .config/git is a file and we notice
.config/git/config is not readable due to ENOTDIR, not ENOENT.
* jn/warn-on-inaccessible-loosen:
config: exit on error accessing any config file
doc: advertise GIT_CONFIG_NOSYSTEM
config: treat user and xdg config permission problems as errors
config, gitignore: failure to access with ENOTDIR is ok
Help compilers' flow analysis by making it more explicit that
error() always returns -1, to reduce false "variable used
uninitialized" warnings. Looks somewhat ugly but not too much.
* jk/error-const-return:
silence some -Wuninitialized false positives
make error()'s constant return value more visible
There are a few error functions that simply wrap error() and
provide a standardized message text. Like error(), they
always return -1; knowing that can help the compiler silence
some false positive -Wuninitialized warnings.
One strategy would be to just declare these as inline in the
header file so that the compiler can see that they always
return -1. However, gcc does not always inline them (e.g.,
it will not inline opterror, even with -O3), which renders
our change pointless.
Instead, let's follow the same route we did with error() in
the last patch, and define a macro that makes the constant
return value obvious to the compiler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a bare repository, there isn't a simple way to respect an
in-tree mailmap without extracting it to a temporary file.
This patch provides a config variable, similar to
mailmap.file, which reads the mailmap from a blob in the
repository.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop duplicate detection from "git-config --get"; this lets it
better match the internal config callbacks, which clears up some
corner cases with includes.
* jk/config-ignore-duplicates:
builtin/config.c: Fix a sparse warning
git-config: use git_config_with_options
git-config: do not complain about duplicate entries
git-config: collect values instead of immediately printing
git-config: fix regexp memory leaks on error conditions
git-config: remove memory leak of key regexp
t1300: test "git config --get-all" more thoroughly
t1300: remove redundant test
t1300: style updates
The get_value function has a goto label for cleaning up on
errors, but it only cleans up half of what the function
might allocate. Let's also clean up the key and regexp
variables there.
Note that we need to take special care when compiling the
regex fails to clean it up ourselves, since it is in a
half-constructed state (we would want to free it, but not
regfree it).
Similarly, we fix git_config_parse_key to return NULL when
it fails, not a pointer to some already-freed memory.
Signed-off-by: Jeff King <peff@peff.net>
There is convenience in warning and moving on when somebody has a
bogus permissions on /etc/gitconfig and cannot do anything about it.
But the cost in predictability and security is too high --- when
unreadable config files are skipped, it means an I/O error or
permissions problem causes important configuration to be bypassed.
For example, servers may depend on /etc/gitconfig to enforce security
policy (setting transfer.fsckObjects or receive.deny*). Best to
always error out when encountering trouble accessing a config file.
This may add inconvenience in some cases:
1. You are inspecting somebody else's repo, and you do not have
access to their .git/config file. Git typically dies in this
case already since we cannot read core.repositoryFormatVersion,
so the change should not be too noticeable.
2. You have used "sudo -u" or a similar tool to switch uid, and your
environment still points Git at your original user's global
config, which is not readable. In this case people really would
be inconvenienced (they would rather see the harmless warning and
continue the operation) but they can work around it by setting
HOME appropriately after switching uids.
3. You do not have access to /etc/gitconfig due to a broken setup.
In this case, erroring out is a good way to put pressure on the
sysadmin to fix the setup. While they wait for a reply, users
can set GIT_CONFIG_NOSYSTEM to true to keep Git working without
complaint.
After this patch, errors accessing the repository-local and systemwide
config files and files requested in include directives cause Git to
exit, just like errors accessing ~/.gitconfig.
Explained-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git reads multiple configuration files: settings come first from the
system config file (typically /etc/gitconfig), then the xdg config
file (typically ~/.config/git/config), then the user's dotfile
(~/.gitconfig), then the repository configuration (.git/config).
Git has always used access(2) to decide whether to use each file; as
an unfortunate side effect, that means that if one of these files is
unreadable (e.g., EPERM or EIO), git skips it. So if I use
~/.gitconfig to override some settings but make a mistake and give it
the wrong permissions then I am subject to the settings the sysadmin
chose for /etc/gitconfig.
Better to error out and ask the user to correct the problem.
This only affects the user and xdg config files, since the user
presumably has enough access to fix their permissions. If the system
config file is unreadable, the best we can do is to warn about it so
the user knows to notify someone and get on with work in the meantime.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously while reading the variable names in config files, there
was a 256 character limit with at most 128 of those characters being
used by the section header portion of the variable name. This
limitation was only enforced while reading the config files. It was
possible to write a config file that was not subsequently readable.
Instead of enforcing this limitation for both reading and writing,
remove it entirely by changing the var member of the config_file
struct to a strbuf instead of a fixed length buffer. Update all of
the parsing functions in config.c to use the strbuf instead of the
static buffer.
The parsing functions that returned the base length of the variable
name now return simply 0 for success and -1 for failure. The base
length information is obtained through the strbuf's len member.
We now send the buf member of the strbuf to external callback
functions to preserve the external api. None of the external
callers rely on the old size limitation for sizing their own buffers
so removing the limit should have no externally visible effect.
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before reading a config file, we check "!access(path, R_OK)"
to make sure that the file exists and is readable. If it's
not, then we silently ignore it.
For the case of ENOENT, this is fine, as the presence of the
file is optional. For other cases, though, it may indicate a
configuration error (e.g., not having permissions to read
the file). Let's print a warning in these cases to let the
user know.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When $HOME is unset, home_config_paths fails and returns NULL pointers
for user_config and xdg_config. Valgrind complains with Syscall param
access(pathname) points to unaddressable byte(s).
Don't call blindly access() on these variables, but test them for
NULL-ness before.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teaches git to normalize pathnames read from readdir(3) and all
arguments from the command line into precomposed UTF-8 (assuming
that they come as decomposed UTF-8) to work around issues on Mac OS.
I think there still are other places that need conversion
(e.g. paths that are read from stdin for some commands), but this
should be a good first step in the right direction.
* tb/sanitize-decomposed-utf-8-pathname:
git on Mac OS and precomposed unicode
Mac OS X mangles file names containing unicode on file systems HFS+,
VFAT or SAMBA. When a file using unicode code points outside ASCII
is created on a HFS+ drive, the file name is converted into
decomposed unicode and written to disk. No conversion is done if
the file name is already decomposed unicode.
Calling open("\xc3\x84", ...) with a precomposed "Ä" yields the same
result as open("\x41\xcc\x88",...) with a decomposed "Ä".
As a consequence, readdir() returns the file names in decomposed
unicode, even if the user expects precomposed unicode. Unlike on
HFS+, Mac OS X stores files on a VFAT drive (e.g. an USB drive) in
precomposed unicode, but readdir() still returns file names in
decomposed unicode. When a git repository is stored on a network
share using SAMBA, file names are send over the wire and written to
disk on the remote system in precomposed unicode, but Mac OS X
readdir() returns decomposed unicode to be compatible with its
behaviour on HFS+ and VFAT.
The unicode decomposition causes many problems:
- The names "git add" and other commands get from the end user may
often be precomposed form (the decomposed form is not easily input
from the keyboard), but when the commands read from the filesystem
to see what it is going to update the index with already is on the
filesystem, readdir() will give decomposed form, which is different.
- Similarly "git log", "git mv" and all other commands that need to
compare pathnames found on the command line (often but not always
precomposed form; a command line input resulting from globbing may
be in decomposed) with pathnames found in the tree objects (should
be precomposed form to be compatible with other systems and for
consistency in general).
- The same for names stored in the index, which should be
precomposed, that may need to be compared with the names read from
readdir().
NFS mounted from Linux is fully transparent and does not suffer from
the above.
As Mac OS X treats precomposed and decomposed file names as equal,
we can
- wrap readdir() on Mac OS X to return the precomposed form, and
- normalize decomposed form given from the command line also to the
precomposed form,
to ensure that all pathnames used in Git are always in the
precomposed form. This behaviour can be requested by setting
"core.precomposedunicode" configuration variable to true.
The code in compat/precomposed_utf8.c implements basically 4 new
functions: precomposed_utf8_opendir(), precomposed_utf8_readdir(),
precomposed_utf8_closedir() and precompose_argv(). The first three
are to wrap opendir(3), readdir(3), and closedir(3) functions.
The argv[] conversion allows to use the TAB filename completion done
by the shell on command line. It tolerates other tools which use
readdir() to feed decomposed file names into git.
When creating a new git repository with "git init" or "git clone",
"core.precomposedunicode" will be set "false".
The user needs to activate this feature manually. She typically
sets core.precomposedunicode to "true" on HFS and VFAT, or file
systems mounted via SAMBA.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git to read the "gitconfig" information from a new location,
$XDG_CONFIG_HOME/git/config; this allows the user to avoid
cluttering $HOME with many per-application configuration files.
In the order of reading, this file comes between the global
configuration file (typically $HOME/.gitconfig) and the system wide
configuration file (typically /etc/gitconfig).
We do not write to this new location (yet).
If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/config
will be used. This is in line with XDG specification.
If the new file does not exist, the behavior is unchanged.
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no reason for this to be in config, except that once
upon a time all of the config parsing was there. It makes
more sense to keep the ident code together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New users tend to work on one branch at a time and push the result
out. The current and upstream modes of push is a more suitable default
mode than matching mode for these people, but neither is surprise-free
depending on how the project is set up. Introduce a "simple" mode that
is a subset of "upstream" but only works when the branch is named the same
between the remote and local repositories.
The plan is to make it the new default when push.default is not
configured.
By Matthieu Moy (5) and others
* mm/simple-push:
push.default doc: explain simple after upstream
push: document the future default change for push.default (matching -> simple)
t5570: use explicit push refspec
push: introduce new push.default mode "simple"
t5528-push-default.sh: add helper functions
Undocument deprecated alias 'push.default=tracking'
Documentation: explain push.default option a bit more
"git config --rename-section" to rename an existing section into a
bogus one did not check the new name.
By Jeff King
* jk/maint-config-bogus-section:
config: reject bogus section names for --rename-section
You can already use relative paths in include.path, which
means that including "foo" from your global "~/.gitconfig"
will look in your home directory. However, you might want to
do something clever like putting "~/.gitconfig-foo" in a
specific repository's config file.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can feed junk to "git config --rename-section", which
will result in a config file that git will not even parse
(so you cannot fix it with git-config). We already have
syntactic sanity checks when setting a variable; let's do
the same for section names.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling "git push" without argument, we want to allow Git to do
something simple to explain and safe. push.default=matching is unsafe
when used to push to shared repositories, and hard to explain to
beginners in some contexts. It is debatable whether 'upstream' or
'current' is the safest or the easiest to explain, so introduce a new
mode called 'simple' that is the intersection of them: push to the
upstream branch, but only if it has the same name remotely. If not, give
an error that suggests the right command to push explicitely to
'upstream' or 'current'.
A question is whether to allow pushing when no upstream is configured. An
argument in favor of allowing the push is that it makes the new mode work
in more cases. On the other hand, refusing to push when no upstream is
configured encourages the user to set the upstream, which will be
beneficial on the next pull. Lacking better argument, we chose to deny
the push, because it will be easier to change in the future if someone
shows us wrong.
Original-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git config" diagnoses an error in a configuration file and
shows the line number for the offending line, it miscounted if the
error was at the end of line.
By Martin Stenberg
* ms/maint-config-error-at-eol-linecount:
config: report errors at the EOL with correct line number
Conflicts:
t/t1300-repo-config.sh
A section in a config file with a missing "]" reports the next line
as bad, same goes to a value with a missing end quote.
This happens because the error is not detected until the end of the
line, when line number is already increased. Fix this by decreasing
line number by one for these cases.
Signed-off-by: Martin Stenberg <martin@gnutiken.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to split your ~/.gitconfig across multiple
files. For example, you might have a "main" file which is
used on many machines, but a small set of per-machine
tweaks. Or you may want to make some of your config public
(e.g., clever aliases) while keeping other data back (e.g.,
your name or other identifying information). Or you may want
to include a number of config options in some subset of your
repos without copying and pasting (e.g., you want to
reference them from the .git/config of participating repos).
This patch introduces an include directive for config files.
It looks like:
[include]
path = /path/to/file
This is syntactically backwards-compatible with existing git
config parsers (i.e., they will see it as another config
entry and ignore it unless you are looking up include.path).
The implementation provides a "git_config_include" callback
which wraps regular config callbacks. Callers can pass it to
git_config_from_file, and it will transparently follow any
include directives, passing all of the discovered options to
the real callback.
Include directives are turned on automatically for "regular"
git config parsing. This includes calls to git_config, as
well as calls to the "git config" program that do not
specify a single file (e.g., using "-f", "--global", etc).
They are not turned on in other cases, including:
1. Parsing of other config-like files, like .gitmodules.
There isn't a real need, and I'd rather be conservative
and avoid unnecessary incompatibility or confusion.
2. Reading single files via "git config". This is for two
reasons:
a. backwards compatibility with scripts looking at
config-like files.
b. inspection of a specific file probably means you
care about just what's in that file, not a general
lookup for "do we have this value anywhere at
all". If that is not the case, the caller can
always specify "--includes".
3. Writing files via "git config"; we want to treat
include.* variables as literal items to be copied (or
modified), and not expand them. So "git config
--unset-all foo.bar" would operate _only_ on
.git/config, not any of its included files (just as it
also does not operate on ~/.gitconfig).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a magic global variable that was intended as an
override to the usual git-config lookup process. Once upon a
time, you could specify GIT_CONFIG to any git program, and
it would look only at that file. This turned out to be
confusing and cause a lot of bugs for little gain. As a
result, dc87183 (Only use GIT_CONFIG in "git config", not
other programs, 2008-06-30) took this away for all callers
except git-config.
Since git-config no longer uses it either, the variable can
just go away. As the diff shows, nobody was setting to
anything except NULL, so we can just replace any sites where
it was read with NULL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers may want to provide a specific version of a file in which to look
for config. Right now this can be done by setting the magic global
config_exclusive_filename variable. By providing a version of git_config
that takes a filename, we can take a step towards making this magic global
go away.
Furthermore, by providing a more "advanced" interface, we now have a a
natural place to add new options for callers like git-config, which care
about tweaking the specifics of config lookup, without disturbing the
large number of "simple" users (i.e., every other part of git).
The astute reader of this patch may notice that the logic for handling
config_exclusive_filename was taken out of git_config_early, but added
into git_config. This means that git_config_early will no longer respect
config_exclusive_filename. That's OK, because the only other caller of
git_config_early is check_repository_format_gently, but the only function
which sets config_exclusive_filename is cmd_config, which does not call
check_repository_format_gently (and if it did, it would have been a bug,
anyway, as we would be checking the repository format in the wrong file).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The other config-writing functions (git_config_set and
git_config_set_multivar) each have an -"in_file" version to
write a specific file. Let's add one for rename_section,
with the eventual goal of moving away from the magic
config_exclusive_filename global.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git_config_set_multivar_in_file function takes a
filename argument to specify the file into which the values
should be written. Currently, this value must be non-NULL.
Callers which want to write to the default location must use
the regular, non-"in_file" version, which will either write
to config_exclusive_filename, or to the repo config if the
exclusive filename is NULL.
Let's migrate the "default to using repo config" logic into
the "in_file" form. That will let callers get the same
default-if-NULL behavior as one gets with
config_exclusive_filename, but without having to use the
global variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/stream-to-pack:
bulk-checkin: replace fast-import based implementation
csum-file: introduce sha1file_checkpoint
finish_tmp_packfile(): a helper function
create_tmp_packfile(): a helper function
write_pack_header(): a helper function
Conflicts:
pack.h
This extends the earlier approach to stream a large file directly from the
filesystem to its own packfile, and allows "git add" to send large files
directly into a single pack. Older code used to spawn fast-import, but the
new bulk-checkin API replaces it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On cygwin, test number 21 of t3200-branch.sh (git branch -m q q2
without config should succeed) fails. The failure involves the
functions from path.c which parcel out internal static buffers
from the git_path() and mkpath() functions.
In particular, the rename_ref() function calls safe_create_leading\
_directories() with a filename returned by git_path("logs/%s", ref).
safe_create_leading_directories(), in turn, calls stat() on each
element of the path it is given. On cygwin, this leads to a call
to git_config() for each component of the path, since this test
explicitly removes the config file. git_config() calls mkpath(), so
on the fourth component of the path, the original buffer passed
into the function is overwritten with the config filename.
Note that this bug is specific to cygwin and it's schizophrenic
stat() functions (see commits adbc0b6, 7faee6b and 7974843). The
lack of a config file and a path with at least four elements is
also important to trigger the bug.
In order to fix the problem, we replace the call to mkpath() with
a call to mksnpath() and provide our own buffer.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config options core.packedGitWindowSize, core.packedGitLimit,
core.deltaBaseCacheLimit, core.bigFileThreshold, pack.windowMemory and
pack.packSizeLimit all claim to support suffixes up to and including
'g'. This implies that they should accept sizes >=2G on 64-bit
systems: certainly, specifying a size of 3g should not silently be
translated to zero or transformed into a large negative value due to
integer overflow. However, due to use of git_config_int() rather than
git_config_ulong(), that is exactly what happens:
% git config core.bigFileThreshold 2g
% git gc --aggressive # with extra debugging code to print out
# core.bigfilethreshold after parsing
bigfilethreshold: -2147483648
[...]
This is probably irrelevant for core.deltaBaseCacheLimit, but is
problematic for the other values. (It is particularly problematic for
core.packedGitLimit, which can't even be set to its default value in
the config file due to this bug.)
This fixes things for 32-bit platforms as well. They get the usual bad
config error if an overlarge value is specified, e.g.:
fatal: bad config value for 'core.bigfilethreshold' in /home/nix/.gitconfig
This is detected in all cases, even if the 32-bit platform has no size
larger than 'long'. For signed integral configuration values, we also
detect the case where the value is too large for the signed type but
not the unsigned type.
Signed-off-by: Nick Alcock <nix@esperi.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code calls git_config from a helper function to parse the config entry
it is interested in. Calling git_config in this way may cause a problem if
the helper function can be called after a previous call to git_config by
another function since the second call to git_config may reset some
variable to the value in the config file which was previously overridden.
The above is not a problem in this case since the function passed to
git_config only parses one config entry and the variable it sets is not
assigned outside of the parsing function. But a programmer who desires
all of the standard config options to be parsed may be tempted to modify
git_attr_config() so that it falls back to git_default_config() and then it
_would_ be vulnerable to the above described behavior.
So, move the call to git_config up into the top-level cmd_* function and
move the responsibility for parsing core.attributesfile into the main
config file parser.
Which is only the logical thing to do ;-)
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rr/revert-cherry-pick-continue:
builtin/revert.c: make commit_list_append() static
revert: Propagate errors upwards from do_pick_commit
revert: Introduce --continue to continue the operation
revert: Don't implicitly stomp pending sequencer operation
revert: Remove sequencer state when no commits are pending
reset: Make reset remove the sequencer state
revert: Introduce --reset to remove sequencer state
revert: Make pick_commits functionally act on a commit list
revert: Save command-line options for continuing operation
revert: Save data for continuing after conflict resolution
revert: Don't create invalid replay_opts in parse_args
revert: Separate cmdline parsing from functional code
revert: Introduce struct to keep command-line options
revert: Eliminate global "commit" variable
revert: Rename no_replay to record_origin
revert: Don't check lone argument in get_encoding
revert: Simplify and inline add_message_to_msg
config: Introduce functions to write non-standard file
advice: Introduce error_resolve_conflict
Introduce two new functions corresponding to "git_config_set" and
"git_config_set_multivar" to write a non-standard configuration file.
Expose these new functions in cache.h for other git programs to use.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
doc/fast-import: clarify notemodify command
Documentation: minor grammatical fix in rev-list-options.txt
Documentation: git-filter-branch honors replacement refs
remote-curl: Add a format check to parsing of info/refs
git-config: Remove extra whitespaces
Remove extra whitespaces introduced by commits
01ebb9dc and fc1905bb
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/clone-cmdline-config:
clone: accept config options on the command line
config: make git_config_parse_parameter a public function
remote: use new OPT_STRING_LIST
parse-options: add OPT_STRING_LIST helper
* jk/maint-config-param:
config: use strbuf_split_str instead of a temporary strbuf
strbuf: allow strbuf_split to work on non-strbufs
config: avoid segfault when parsing command-line config
config: die on error in command-line config
fix "git -c" parsing of values with equals signs
strbuf_split: add a max parameter
In a workload other than "git log" (without pathspec nor any option that
causes us to inspect trees and blobs), the recency pack order is said to
cause the access jump around quite a bit. Add a hook to allow us observe
how bad it is.
"git config core.logpackaccess /var/tmp/pal.txt" will give you the log
in the specified file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use this internally to parse "git -c core.foo=bar", but
the general format of "key=value" is useful for other
places.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This saves an allocation and copy, and also fixes a minor
memory leak.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already check for an empty key on the left side of an
equals, but we would segfault if there was no content at
all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error handling for git_config is somewhat confusing. We
collect errors from running git_config_from_file on the
various config files and carefully pass them back up. But
the two odd things are:
1. We actually die on most errors in git_config_from_file.
In fact, the only error we actually pass back up is if
fopen() fails on the file.
2. Most callers of git_config do not check the error
return at all, but will continue if git_config reports
an error.
When the code for "git -c core.foo=bar" was added, it
dutifully passed errors up the call stack, only for them to
be eventually ignored. This makes it inconsistent with the
file-parsing code, which will die when it sees malformed
config. And it's somewhat unsafe, because it means an error
in parsing a typo like:
git -c clean.requireforce=ture clean
will continue the command, ignoring the config the user
tried to give.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you do something like:
git -c core.foo="value with = in it" ...
we would split your option on "=" into three fields and
throw away the third one. With this patch we correctly take
everything after the first "=" as the value (keys cannot
have an equals sign in them, so the parsing is unambiguous).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Cygwin, this fixes a test failure in t3301-notes.sh (test 98,
"git notes copy --for-rewrite (disabled)").
The test failure is caused by a recursive call to git_config() which
has the effect of skipping to the end-of-file while processing the
"notes.rewriteref" config variable. Thus, any config variables that
appear after "notes.rewriteref" are simply ignored by git_config().
Also, we note that the original FILE handle is leaked as a result
of the recursive call.
The recursive call to git_config() is due to the "schizophrenic stat"
functions on cygwin, where one of two different implementations of
the l/stat functions is selected lazily, depending on some config
variables.
In this case, the init_copy_notes_for_rewrite() function calls
git_config() with the notes_rewrite_config() callback function.
This callback, while processing the "notes.rewriteref" variable,
in turn calls string_list_add_refs_by_glob() to process the
associated ref value. This eventually leads to a call to the
get_ref_dir() function, which in turn calls stat(). On cygwin,
the stat() macro leads to an indirect call to cygwin_stat_stub()
which, via init_stat(), then calls git_config() in order to
determine which l/stat implementation to bind to.
In order to solve this problem, we modify git_config() so that the
global state variables used by the config reading code is packaged
up and managed on a local state stack.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-config-alias-fix:
handle_options(): do not miscount how many arguments were used
config: always parse GIT_CONFIG_PARAMETERS during git_config
git_config: don't peek at global config_parameters
config: make environment parsing routines static
Commit 8f323c00 (drop support for GIT_CONFIG_NOGLOBAL, 15-03-2011)
removed the git_config_global() function, among other things, since
it is no longer required. Unfortunately, this function has since
been unintentionally restored by a faulty conflict resolution.
Remove it.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-config-alias-fix:
handle_options(): do not miscount how many arguments were used
config: always parse GIT_CONFIG_PARAMETERS during git_config
git_config: don't peek at global config_parameters
config: make environment parsing routines static
Conflicts:
config.c
Previously we parsed GIT_CONFIG_PARAMETERS lazily into a
linked list, and then checked that list during future
invocations of git_config. However, that ignores the fact
that the environment variable could change during our run
(e.g., because we parse more "-c" as part of an alias).
Instead, let's just re-parse the environment variable each
time. It's generally not very big, and it's no more work
than parsing the config files, anyway.
As a bonus, we can ditch all of the linked list storage code
entirely, making the code much simpler.
The test unfortunately still does not pass because of an
unrelated bug in handle_options.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config_parameters list in config.c is an implementation
detail of git_config_from_parameters; instead, that function
should tell us whether it found anything.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nobody outside of git_config_from_parameters should need
to use the GIT_CONFIG_PARAMETERS parsing functions, so let's
make them private.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return codes of git_config_set() and friends are magic numbers right
in the source. #define them in cache.h where the functions are declared,
and use the constants in the source.
Also, mention the resulting exit codes of "git config" in its man page
(and complete the list).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Yes, it is clear that "eol" wants to mean some sort of end-of-line thing,
but as the name of a global variable, it is way too short to describe what
kind of end-of-line thing it wants to represent. Besides, there are many
codepaths that want to use their own local "char *eol" variable to point
at the end of the current line they are processing.
This global variable holds what we read from core.eol configuration
variable. Name it as such.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_value in config.c has a static buffer of 1024 bytes that it
parse the value into. This can sometimes be a problem when a
config file contains very long values.
It's particularly amusing that git-config already is able to write
such files, so it should probably be able to read them as well.
Fix this by using a strbuf instead of a fixed-size buffer.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pack-objects command should take notice of the object file and
refrain from attempting to delta large ones, to be consistent with
the fast-import command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/test-sanitize-git-env:
tests: scrub environment of GIT_* variables
config: drop support for GIT_CONFIG_NOGLOBAL
gitattributes: drop support for GIT_ATTR_NOGLOBAL
tests: suppress system gitattributes
tests: stop worrying about obsolete environment variables
* maint:
Prepare draft release notes to 1.7.4.2
gitweb: highlight: replace tabs with spaces
make_absolute_path: return the input path if it points to our buffer
valgrind: ignore SSE-based strlen invalid reads
diff --submodule: split into bite-sized pieces
cherry: split off function to print output lines
branch: split off function that writes tracking info and commit subject
standardize brace placement in struct definitions
compat: make gcc bswap an inline function
enums: omit trailing comma for portability
Conflicts:
RelNotes
In a struct definitions, unlike functions, the prevailing style is for
the opening brace to go on the same line as the struct name, like so:
struct foo {
int bar;
char *baz;
};
Indeed, grepping for 'struct [a-z_]* {$' yields about 5 times as many
matches as 'struct [a-z_]*$'.
Linus sayeth:
Heretic people all over the world have claimed that this inconsistency
is ... well ... inconsistent, but all right-thinking people know that
(a) K&R are _right_ and (b) K&R are right.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that test-lib sets $HOME to protect against pollution from user
settings, GIT_CONFIG_NOGLOBAL is not needed for use by the test
suite any more. And as luck would have it, a quick code search
reveals no other users in the wild.
This patch does not affect GIT_CONFIG_NOSYSTEM, which is still
needed.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default of 7 comes from fairly early in git development, when
seven hex digits was a lot (it covers about 250+ million hash
values). Back then I thought that 65k revisions was a lot (it was what
we were about to hit in BK), and each revision tends to be about 5-10
new objects or so, so a million objects was a big number.
These days, the kernel isn't even the largest git project, and even
the kernel has about 220k revisions (_much_ bigger than the BK tree
ever was) and we are approaching two million objects. At that point,
seven hex digits is still unique for a lot of them, but when we're
talking about just two orders of magnitude difference between number
of objects and the hash size, there _will_ be collisions in truncated
hash values. It's no longer even close to unrealistic - it happens all
the time.
We should both increase the default abbrev that was unrealistically
small, _and_ add a way for people to set their own default per-project
in the git config file.
This is the first step to first make it configurable; the default of 7
is not raised yet.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 72a5b561fc, as adding
fixed number of hexdigits more than necessary to make one object name
locally unique does not help in futureproofing the uniqueness of names
we generate today.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible to break your repository config by creating an invalid key. The
config parser in turn chokes on it:
$ git init
Initialized empty Git repository in /tmp/gittest/.git/
$ git config .foo false
$ git config core.bare
fatal: bad config file line 6 in .git/config
This patch makes git-config reject keys which start or end with a dot and adds
tests for these cases.
Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sanity-check config variable names when adding and retrieving them. As a side
effect code duplication between git_config_set_multivar and get_value (in
builtin/config.c) was removed and the common functionality was placed in
git_config_parse_key.
This breaks a test in t1300 which used invalid section-less keys in the tests
for "git -c". However, allowing such names there was useless, since there was
no way to set them via config file, and no part of git actually tried to use
section-less keys. This patch updates the test to use more realistic examples
as well as adding its own test.
Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users are sometimes confused with two different types of "tracking" behavior
in Git: "remote-tracking" branches (e.g. refs/remotes/*/*) versus the
merge/rebase relationship between a local branch and its @{upstream}
(controlled by branch.foo.remote and branch.foo.merge config settings).
When the push.default is set to 'tracking', it specifies that a branch should
be pushed to its @{upstream} branch. In other words, setting push.default to
'tracking' applies only to the latter of the above two types of "tracking"
behavior.
In order to make this more understandable to the user, we rename the
push.default == 'tracking' option to push.default == 'upstream'.
push.default == 'tracking' is left as a deprecated synonym for 'upstream'.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/setup: (47 commits)
setup_work_tree: adjust relative $GIT_WORK_TREE after moving cwd
git.txt: correct where --work-tree path is relative to
Revert "Documentation: always respect core.worktree if set"
t0001: test git init when run via an alias
Remove all logic from get_git_work_tree()
setup: rework setup_explicit_git_dir()
setup: clean up setup_discovered_git_dir()
t1020-subdirectory: test alias expansion in a subdirectory
setup: clean up setup_bare_git_dir()
setup: limit get_git_work_tree()'s to explicit setup case only
Use git_config_early() instead of git_config() during repo setup
Add git_config_early()
git-rev-parse.txt: clarify --git-dir
t1510: setup case #31
t1510: setup case #30
t1510: setup case #29
t1510: setup case #28
t1510: setup case #27
t1510: setup case #26
t1510: setup case #25
...
This version of git_config() will be used during repository setup.
As a repository is being set up, $GIT_DIR is not nailed down yet,
git_pathdup() should not be used to get $GIT_DIR/config.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function recently gained the ability to recognize the documented "0"
and "1" values as false/true. However, unlike regular git_config_bool, it
did not treat arbitrary non-zero numbers as true.
While this is undocumented and probably ridiculous for somebody to rely
on, it is safer to behave exactly as git_config_bool would. Because
git_config_maybe_bool can be used to retrofit new non-bool values onto
existing bool options, not behaving in exactly the same way is technically
a regression.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We explicitly document "0" and "1" as synonyms for "false"
and "true" in boolean config options. However, we don't
actually handle those values in git_config_maybe_bool.
In most cases this works fine, as we call git_config_bool,
which in turn calls git_config_bool_or_int, which in turn
calls git_config_maybe_bool. Values of 0/1 are considered
"not bool", but their integer values end up being converted
to the corresponding boolean values.
However, the log.decorate code looks for maybe_bool
explicitly, so that it can fall back to the "short" and
"full" strings. It does not handle 0/1 at all, and considers
them invalid values.
We cannot simply add 0/1 support to git_config_maybe_bool.
That would confuse git_config_bool_or_int, which may want to
distinguish the integer values "0" and "1" from bools.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though git makes sure that it uses enough hexdigits to show an
abbreviated object name unambiguously, as more objects are added to the
repository over time, a short name that used to be unique will stop being
unique. Git uses this many extra hexdigits that are more than necessary
to make the object name currently unique, in the hope that its output will
stay unique a bit longer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git_config() function signals error by returning -1 in
two instances:
1. An actual error occurs in opening a config file (parse
errors cause an immediate die).
2. Of the three possible config files, none was found.
However, this second case is often not an error at all; it
simply means that the user has no configuration (they are
outside a repo, and they have no ~/.gitconfig file). This
can lead to confusing errors, such as when the bash
completion calls "git config --list" outside of a repo. If
the user has a ~/.gitconfig, the command completes
succesfully; if they do not, it complains to stderr.
This patch allows callers of git_config to distinguish
between the two cases. Error is signaled by -1, and
otherwise the return value is the number of files parsed.
This means that the traditional "git_config(...) < 0" check
for error should work, but callers who want to know whether
we parsed any files or not can still do so.
[jc: with tests from Jonathan]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kf/askpass-config:
Extend documentation of core.askpass and GIT_ASKPASS.
Allow core.askpass to override SSH_ASKPASS.
Add a new option 'core.askpass'.
Michael Haggerty
Junio C Hamano
Karsten Blees
Jeff King
Paul Tan
Johannes Schindelin
René Scharfe
Steffen Prohaska
Tanay Abhra
Matthieu Moy
Brian Gesiak
Øystein Walle
Nguyễn Thái Ngọc Duy
Eric Wong
Kirill A. Shutemov
Thomas Rast
Christian Couder
Ramsay Jones
Heiko Voigt
Jonathan Nieder
Robin Rosenberg
Ben Walton
Torsten Bögershausen
Huynh Khoi Nguyen Nguyen
Martin Stenberg
Nick Alcock
Ramkumar Ramachandra
Pavan Kumar Sunkara
Michael J Gruber
Erik Faye-Lund
Linus Torvalds
Libor Pechacek
Johan Herland