Convert the declaration and definition of strbuf_add_unique_abbrev to
make it take a pointer to struct object_id. Predeclare the struct in
strbuf.h, as cache.h includes strbuf.h before it declares the struct,
and otherwise the struct declaration would have the wrong scope.
Apply the following semantic patch, along with the standard object_id
transforms, to adjust the callers:
@@
expression E1, E2, E3;
@@
- strbuf_add_unique_abbrev(E1, E2.hash, E3);
+ strbuf_add_unique_abbrev(E1, &E2, E3);
@@
expression E1, E2, E3;
@@
- strbuf_add_unique_abbrev(E1, E2->hash, E3);
+ strbuf_add_unique_abbrev(E1, E2, E3);
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `log --decorate` is used, git will decorate commits with all
available refs. While in most cases this may give the desired effect,
under some conditions it can lead to excessively verbose output.
Introduce two command line options, `--decorate-refs=<pattern>` and
`--decorate-refs-exclude=<pattern>` to allow the user to select which
refs are used in decoration.
When "--decorate-refs=<pattern>" is given, only the refs that match the
pattern are used in decoration. The refs that match the pattern when
"--decorate-refs-exclude=<pattern>" is given, are never used in
decoration.
These options follow the same convention for mixing negative and
positive patterns across the system, assuming that the inclusive default
is to match all refs available.
(1) if there is no positive pattern given, pretend as if an
inclusive default positive pattern was given;
(2) for each candidate, reject it if it matches no positive
pattern, or if it matches any one of the negative patterns.
The rules for what is considered a match are slightly different from the
rules used elsewhere.
Commands like `log --glob` assume a trailing '/*' when glob chars are
not present in the pattern. This makes it difficult to specify a single
ref. On the other hand, commands like `describe --match --all` allow
specifying exact refs, but do not have the convenience of allowing
"shorthand refs" like 'refs/heads' or 'heads' to refer to
'refs/heads/*'.
The commands introduced in this patch consider a match if:
(a) the pattern contains globs chars,
and regular pattern matching returns a match.
(b) the pattern does not contain glob chars,
and ref '<pattern>' exists, or if ref exists under '<pattern>/'
This allows both behaviours (allowing single refs and shorthand refs)
yet remaining compatible with existent commands.
Helped-by: Kevin Daudt <me@ikke.info>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for adding consistent "%(trailers)" atom options to
`git-for-each-ref(1)`'s "--format" argument, change "%(trailers)" in
pretty.c to separate sub-arguments with a ",", instead of a ":".
Multiple sub-arguments are given either as "%(trailers:unfold,only)" or
"%(trailers:only,unfold)".
This change disambiguates between "top-level" arguments, and arguments
given to the trailers atom itself. It is consistent with the behavior of
"%(upstream)" and "%(push)" atoms.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git interpret-trailers" has been taught a "--parse" and a few
other options to make it easier for scripts to grab existing
trailer lines from a commit log message.
* jk/trailers-parse:
doc/interpret-trailers: fix "the this" typo
pretty: support normalization options for %(trailers)
t4205: refactor %(trailers) tests
pretty: move trailer formatting to trailer.c
interpret-trailers: add --parse convenience option
interpret-trailers: add an option to unfold values
interpret-trailers: add an option to show only existing trailers
interpret-trailers: add an option to show only the trailers
trailer: put process_trailers() options into a struct
The interpret-trailers command recently learned some options
to make its output easier to parse (for a caller whose only
interested in picking out the trailer values). But it's not
very efficient for asking for the trailers of many commits
in a single invocation.
We already have "%(trailers)" to do that, but it doesn't
know about unfolding or omitting non-trailers. Let's plumb
those options through, so you can have the best of both.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next commit will add many features to the %(trailer)
placeholder in pretty.c. We'll need to access some internal
functions of trailer.c for that, so our options are either:
1. expose those functions publicly
or
2. make an entry point into trailer.c to do the formatting
Doing (2) ends up exposing less surface area, though do note
that caveats in the docstring of the new function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The color placeholders have traditionally been
unconditional, showing colors even when git is not otherwise
configured to do so. This was not so bad for their original
use, which was on the command-line (and the user could
decide at that moment whether to add colors or not). But
these days we have configured formats via pretty.*, and
those should operate correctly in multiple contexts.
In 3082517 (log --format: teach %C(auto,black) to respect
color config, 2012-12-17), we gave an extended placeholder
that could be used to accomplish this. But it's rather
clunky to use, because you have to specify it individually
for each color (and their matching resets) in the format.
We shied away from just switching the default to auto,
because it is technically breaking backwards compatibility.
However, there's not really a use case for unconditional
colors. The most plausible reason you would want them is to
redirect "git log" output to a file. But there, the right
answer is --color=always, as it does the right thing both
with custom user-format colors and git-generated colors.
So let's switch to the more useful default. In the
off-chance that somebody really does find a use for
unconditional colors without wanting to enable the rest of
git's colors, we provide a new %C(always,...) to enable the
old behavior. And we can remind them of --color=always in
the documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pretty-format specifiers like '%h', '%t', etc. had an
optimization that no longer works correctly. In preparation/hope
of getting it correctly implemented, first discard the optimization
that is broken.
* rs/pretty-add-again:
pretty: recalculate duplicate short hashes
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
The pretty-format specifiers like '%h', '%t', etc. had an
optimization that no longer works correctly. In preparation/hope
of getting it correctly implemented, first discard the optimization
that is broken.
* rs/pretty-add-again:
pretty: recalculate duplicate short hashes
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b9c6232138 (--format=pretty: avoid calculating expensive expansions
twice) optimized adding short hashes multiple times by using the
fact that the output strbuf was only ever simply appended to and
copying the added string from the previous run. That prerequisite
is no longer given; we now have modfiers like %< and %+ that can
cause the cache to lose track of the correct offsets. Remove it.
Reported-by: Michael Giuffrida <michaelpg@chromium.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, Git's source code represents all timestamps as `unsigned
long`. In preparation for using a more appropriate data type, let's
introduce a symbol `parse_timestamp` (currently being defined to
`strtoul`) where appropriate, so that we can later easily switch to,
say, use `strtoull()` instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the email-style subject prefix (e.g. "Subject: [PATCH] ") directly
when it's needed instead of letting log_write_email_headers() prepare
it in a static buffer in advance. This simplifies storage ownership and
code flow.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent patches have expanded on the trailers.c code and we have the
builtin commant git-interpret-trailers which can be used to add or
modify trailer lines. However, there is no easy way to simply display
the trailers of a commit message.
Add support for %(trailers) format modifier which will use the
trailer_info_get() calls to read trailers in an identical way as git
interpret-trailers does. Use a long format option instead of a short
name so that future work can more easily unify ref-filter and pretty
formats.
Add documentation and tests for the same.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanup.
* rs/cocci:
use strbuf_add_unique_abbrev() for adding short hashes, part 3
remove unnecessary NULL check before free(3)
coccicheck: make transformation for strbuf_addf(sb, "...") more precise
use strbuf_add_unique_abbrev() for adding short hashes, part 2
use strbuf_addstr() instead of strbuf_addf() with "%s", part 2
gitignore: ignore output files of coccicheck make target
use strbuf_addstr() for adding constant strings to a strbuf, part 2
add coccicheck make target
contrib/coccinelle: fix semantic patch for oid_to_hex_r()
When "%C(auto)" appears at the very beginning of the pretty format
string, it did not need to issue the reset sequence, but it did.
This is a small optimization to already graduated topic.
* rs/c-auto-resets-attributes:
pretty: avoid adding reset for %C(auto) if output is empty
pretty: let %C(auto) reset all attributes
The GPG verification status shown in "%G?" pretty format specifier
was not rich enough to differentiate a signature made by an expired
key, a signature made by a revoked key, etc. New output letters
have been assigned to express them.
* mg/gpg-richer-status:
gpg-interface: use more status letters
According to gpg2's doc/DETAILS:
For each signature only one of the codes GOODSIG, BADSIG,
EXPSIG, EXPKEYSIG, REVKEYSIG or ERRSIG will be emitted.
gpg1 ("classic") behaves the same (although doc/DETAILS differs).
Currently, we parse gpg's status output for GOODSIG, BADSIG and
trust information and translate that into status codes G, B, U, N
for the %G? format specifier.
git-verify-* returns success in the GOODSIG case only. This is
somewhat in disagreement with gpg, which considers the first 5 of
the 6 above as VALIDSIG, but we err on the very safe side.
Introduce additional status codes E, X, Y, R for ERRSIG, EXPSIG,
EXPKEYSIG, and REVKEYSIG so that a user of %G? gets more information
about the absence of a 'G' on first glance.
Requested-by: Alex <agrambot@gmail.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call strbuf_add_unique_abbrev() to add abbreviated hashes to strbufs
instead of taking detours through find_unique_abbrev() and its static
buffer. This is shorter in most cases and a bit more efficient.
The changes here are not easily handled by a semantic patch because
they involve removing temporary variables and deconstructing format
strings for strbuf_addf().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "%C(auto)" appears at the very beginning of the pretty format
string, it did not need to issue the reset sequence, but it did.
* rs/c-auto-resets-attributes:
pretty: avoid adding reset for %C(auto) if output is empty
We emit an escape sequence for resetting color and attribute for
%C(auto) to make sure automatic coloring is displayed as intended.
Stop doing that if the output strbuf is empty, i.e. when %C(auto)
appears at the start of the format string, because then there is no
need for a reset and we save a few bytes in the output.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pretty-format specifier "%C(auto)" used by the "log" family of
commands to enable coloring of the output is taught to also issue a
color-reset sequence to the output.
* rs/c-auto-resets-attributes:
pretty: let %C(auto) reset all attributes
Reset colors and attributes upon %C(auto) to enable full automatic
control over them; otherwise attributes like bold or reverse could
still be in effect from previous %C placeholders.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and use a helper function that decodes the char value of two
hexadecimal digits. It returns a negative number on error, avoids
running over the end of the given string and doesn't shift negative
values.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call strbuf_add_unique_abbrev() to add abbreviated hashes to strbufs
instead of taking detours through find_unique_abbrev() and its static
buffer. This is shorter and a bit more efficient.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A helper function that takes the contents of a commit object and
finds its subject line did not ignore leading blank lines, as is
commonly done by other codepaths. Make it ignore leading blank
lines to match.
* js/find-commit-subject-ignore-leading-blanks:
reset --hard: skip blank lines when reporting the commit subject
sequencer: use skip_blank_lines() to find the commit subject
commit -C: skip blank lines at the beginning of the message
commit.c: make find_commit_subject() more robust
pretty: make the skip_blank_lines() function public
"log --graph --format=" learned that "%>|(N)" specifies the width
relative to the terminal's left edge, not relative to the area to
draw text that is to the right of the ancestry-graph section. It
also now accepts negative N that means the column limit is relative
to the right border.
* nd/graph-width-padded:
pretty.c: support <direction>|(<negative number>) forms
pretty: pass graph width to pretty formatting for use in '%>|(N)'
A helper function that takes the contents of a commit object and
finds its subject line did not ignore leading blank lines, as is
commonly done by other codepaths. Make it ignore leading blank
lines to match.
* js/find-commit-subject-ignore-leading-blanks:
reset --hard: skip blank lines when reporting the commit subject
sequencer: use skip_blank_lines() to find the commit subject
commit -C: skip blank lines at the beginning of the message
commit.c: make find_commit_subject() more robust
pretty: make the skip_blank_lines() function public
"log --graph --format=" learned that "%>|(N)" specifies the width
relative to the terminal's left edge, not relative to the area to
draw text that is to the right of the ancestry-graph section. It
also now accepts negative N that means the column limit is relative
to the right border.
* nd/graph-width-padded:
pretty.c: support <direction>|(<negative number>) forms
pretty: pass graph width to pretty formatting for use in '%>|(N)'
Teach format-patch and mailsplit (hence "am") how a line that
happens to begin with "From " in the e-mail message is quoted with
">", so that these lines can be restored to their original shape.
* ew/mboxrd-format-am:
am: support --patch-format=mboxrd
mailsplit: support unescaping mboxrd messages
pretty: support "mboxrd" output format
The commands in `git log` family take %C(auto) in a custom format
string. This unconditionally turned the color on, ignoring
--no-color or with --color=auto when the output is not connected to
a tty; this was corrected to make the format truly behave as
"auto".
* et/pretty-format-c-auto:
format_commit_message: honor `color=auto` for `%C(auto)`
This function will be used also in the find_commit_subject()
function.
While at it, rename the function to reflect that it skips not only
empty lines, but any lines consisting of only whitespace, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commands in `git log` family take %C(auto) in a custom format
string. This unconditionally turned the color on, ignoring
--no-color or with --color=auto when the output is not connected to
a tty; this was corrected to make the format truly behave as
"auto".
* et/pretty-format-c-auto:
format_commit_message: honor `color=auto` for `%C(auto)`
%>|(num), %><|(num) and %<|(num), where num is a positive number, sets a
fixed column from the screen's left border. There is no way for us to
specifiy a column relative to the right border, which is useful when you
want to make use of all terminal space (on big screens). Use negative
num for that. Inspired by Go's array syntax (*).
(*) I know Python has this first (or before Go, at least) but the idea
didn't occur to me until I learned Go.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass graph width to pretty formatting, to make N in '%>|(N)'
include columns consumed by graph rendered when --graph option
is in use.
For example, in the output of
git log --all --graph --pretty='format: [%>|(20)%h] %ar%d'
this change will make all commit hashes align at 20th column from
the edge of the terminal, not from the edge of the graph.
Signed-off-by: Josef Kufner <josef@kufner.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This output format prevents format-patch output from breaking
readers if somebody copy+pasted an mbox into a commit message.
Unlike the traditional "mboxo" format, "mboxrd" is designed to
be fully-reversible. "mboxrd" also gracefully degrades to
showing extra ">" in existing "mboxo" readers.
This degradation is preferable to breaking message splitting
completely, a problem I've seen in "mboxcl" due to having
multiple, non-existent, or inaccurate Content-Length headers.
"mboxcl2" is a non-starter since it's inherits the problems
of "mboxcl" while being completely incompatible with existing
tooling based around mailsplit.
ref: http://homepage.ntlworld.com/jonathan.deboynepollard/FGA/mail-mbox-formats.html
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-log(1) documents that when specifying the `%C(auto)` format
placeholder will "turn on auto coloring on the next %placeholders
until the color is switched again."
However, when `%C(auto)` is used, the present implementation will turn
colors on unconditionally (even if the color configuration is turned off
for the current context - for example, `--no-color` was specified or the
color is `auto` and the output is not a tty).
Update `format_commit_one` to examine the current context when a format
string of `%C(auto)` is specified, which ensures that we will not
unconditionally write colors. This brings that behavior in line with
the behavior of `%C(auto,<colorname>)`, and allows the user the ability
to specify that color should be displayed only when the output is a
tty.
Additionally, add a test for `%C(auto)` and update the existing tests
for `%C(auto,...)` as they were misidentified as being applicable to
`%C(auto)`.
Tests from Jeff King.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Edward Thomson <ethomson@edwardthomson.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the local convention of the project is to use tab width that is
not 8, it may make sense to allow "git log --expand-tabs=<n>" to
tweak the output to match it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --pretty={medium,full,fuller}" and "git log" by default
prepend 4 spaces to the log message, so it makes sense to enable
the new "expand-tabs" facility by default for these formats.
Add --no-expand-tabs option to override the new default.
The change alone breaks a test in t4201 that runs "git shortlog"
on the output from "git log", and expects that the output from
"git log" does not do such a tab expansion. Adjust the test to
explicitly disable expand-tabs with --no-expand-tabs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A commit log message sometimes tries to line things up using tabs,
assuming fixed-width font with the standard 8-place tab settings.
Viewing such a commit however does not work well in "git log", as
we indent the lines by prefixing 4 spaces in front of them.
This should all line up:
Column 1 Column 2
-------- --------
A B
ABCD EFGH
SPACES Instead of Tabs
Even with multi-byte UTF8 characters:
Column 1 Column 2
-------- --------
Ä B
åäö 100
A Møøse once bit my sister..
Tab-expand the lines in "git log --expand-tabs" output before
prefixing 4 spaces.
This is based on the patch by Linus Torvalds, but at this step, we
require an explicit command line option to enable the behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
brian m. carlson
Rafael Ascensão
Taylor Blau
Junio C Hamano
Jeff King
Brandon Williams
René Scharfe
Johannes Schindelin
Jacob Keller
Michael J Gruber
Nguyễn Thái Ngọc Duy
Josef Kufner
Eric Wong
Edward Thomson
Linus Torvalds