Граф коммитов

128 Коммитов

Автор SHA1 Сообщение Дата
Junio C Hamano 3a2a1dc170 Merge branch 'sb/object-store-lookup'
lookup_commit_reference() and friends have been updated to find
in-core object for a specific in-core repository instance.

* sb/object-store-lookup: (32 commits)
  commit.c: allow lookup_commit_reference to handle arbitrary repositories
  commit.c: allow lookup_commit_reference_gently to handle arbitrary repositories
  tag.c: allow deref_tag to handle arbitrary repositories
  object.c: allow parse_object to handle arbitrary repositories
  object.c: allow parse_object_buffer to handle arbitrary repositories
  commit.c: allow get_cached_commit_buffer to handle arbitrary repositories
  commit.c: allow set_commit_buffer to handle arbitrary repositories
  commit.c: migrate the commit buffer to the parsed object store
  commit-slabs: remove realloc counter outside of slab struct
  commit.c: allow parse_commit_buffer to handle arbitrary repositories
  tag: allow parse_tag_buffer to handle arbitrary repositories
  tag: allow lookup_tag to handle arbitrary repositories
  commit: allow lookup_commit to handle arbitrary repositories
  tree: allow lookup_tree to handle arbitrary repositories
  blob: allow lookup_blob to handle arbitrary repositories
  object: allow lookup_object to handle arbitrary repositories
  object: allow object_as_type to handle arbitrary repositories
  tag: add repository argument to deref_tag
  tag: add repository argument to parse_tag_buffer
  tag: add repository argument to lookup_tag
  ...
2018-08-02 15:30:42 -07:00
Junio C Hamano bd1a32d5c8 Merge branch 'jk/fsck-gitmodules-gently'
Recent "security fix" to pay attention to contents of ".gitmodules"
while accepting "git push" was a bit overly strict than necessary,
which has been adjusted.

* jk/fsck-gitmodules-gently:
  fsck: downgrade gitmodulesParse default to "info"
  fsck: split ".gitmodules too large" error from parse failure
  fsck: silence stderr when parsing .gitmodules
  config: add options parameter to git_config_from_mem
  config: add CONFIG_ERROR_SILENT handler
  config: turn die_on_error into caller-facing enum
2018-08-02 15:30:39 -07:00
Junio C Hamano a9e7fe96cc Merge branch 'rj/submodule-fsck-skip'
"fsck.skipList" did not prevent a blob object listed there from
being inspected for is contents (e.g. we recently started to
inspect the contents of ".gitmodules" for certain malicious
patterns), which has been corrected.

* rj/submodule-fsck-skip:
  fsck: check skiplist for object in fsck_blob()
2018-07-24 14:50:42 -07:00
Junio C Hamano 00624d608c Merge branch 'sb/object-store-grafts'
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.

* sb/object-store-grafts:
  commit: allow lookup_commit_graft to handle arbitrary repositories
  commit: allow prepare_commit_graft to handle arbitrary repositories
  shallow: migrate shallow information into the object parser
  path.c: migrate global git_path_* to take a repository argument
  cache: convert get_graft_file to handle arbitrary repositories
  commit: convert read_graft_file to handle arbitrary repositories
  commit: convert register_commit_graft to handle arbitrary repositories
  commit: convert commit_graft_pos() to handle arbitrary repositories
  shallow: add repository argument to is_repository_shallow
  shallow: add repository argument to check_shallow_file_for_update
  shallow: add repository argument to register_shallow
  shallow: add repository argument to set_alternate_shallow_file
  commit: add repository argument to lookup_commit_graft
  commit: add repository argument to prepare_commit_graft
  commit: add repository argument to read_graft_file
  commit: add repository argument to register_commit_graft
  commit: add repository argument to commit_graft_pos
  object: move grafts to object parser
  object-store: move object access functions to object-store.h
2018-07-18 12:20:28 -07:00
Jeff King 64eb14d310 fsck: downgrade gitmodulesParse default to "info"
We added an fsck check in ed8b10f631 (fsck: check
.gitmodules content, 2018-05-02) as a defense against the
vulnerability from 0383bbb901 (submodule-config: verify
submodule names as paths, 2018-04-30). With the idea that
up-to-date hosting sites could protect downstream unpatched
clients that fetch from them.

As part of that defense, we reject any ".gitmodules" entry
that is not syntactically valid. The theory is that if we
cannot even parse the file, we cannot accurately check it
for vulnerabilities. And anybody with a broken .gitmodules
file would eventually want to know anyway.

But there are a few reasons this is a bad tradeoff in
practice:

 - for this particular vulnerability, the client has to be
   able to parse the file. So you cannot sneak an attack
   through using a broken file, assuming the config parsers
   for the process running fsck and the eventual victim are
   functionally equivalent.

 - a broken .gitmodules file is not necessarily a problem.
   Our fsck check detects .gitmodules in _any_ tree, not
   just at the root. And the presence of a .gitmodules file
   does not necessarily mean it will be used; you'd have to
   also have gitlinks in the tree. The cgit repository, for
   example, has a file named .gitmodules from a
   pre-submodule attempt at sharing code, but does not
   actually have any gitlinks.

 - when the fsck check is used to reject a push, it's often
   hard to work around. The pusher may not have full control
   over the destination repository (e.g., if it's on a
   hosting server, they may need to contact the hosting
   site's support). And the broken .gitmodules may be too
   far back in history for rewriting to be feasible (again,
   this is an issue for cgit).

So we're being unnecessarily restrictive without actually
improving the security in a meaningful way. It would be more
convenient to downgrade this check to "info", which means
we'd still comment on it, but not reject a push. Site admins
can already do this via config, but we should ship sensible
defaults.

There are a few counterpoints to consider in favor of
keeping the check as an error:

 - the first point above assumes that the config parsers for
   the victim and the fsck process are equivalent. This is
   pretty true now, but as time goes on will become less so.
   Hosting sites are likely to upgrade their version of Git,
   whereas vulnerable clients will be stagnant (if they did
   upgrade, they'd cease to be vulnerable!). So in theory we
   may see drift over time between what two config parsers
   will accept.

   In practice, this is probably OK. The config format is
   pretty established at this point and shouldn't change a
   lot. And the farther we get from the announcement of the
   vulnerability, the less interesting this extra layer of
   protection becomes. I.e., it was _most_ valuable on day
   0, when everybody's client was still vulnerable and
   hosting sites could protect people. But as time goes on
   and people upgrade, the population of vulnerable clients
   becomes smaller and smaller.

 - In theory this could protect us from other
   vulnerabilities in the future. E.g., .gitmodules are the
   only way for a malicious repository to feed data to the
   config parser, so this check could similarly protect
   clients from a future (to-be-found) bug there.

   But that's trading a hypothetical case for real-world
   pain today. If we do find such a bug, the hosting site
   would need to be updated to fix it, too. At which point
   we could figure out whether it's possible to detect
   _just_ the malicious case without hurting existing
   broken-but-not-evil cases.

 - Until recently, we hadn't made any restrictions on
   .gitmodules content. So now in tightening that we're
   hitting cases where certain things used to work, but
   don't anymore. There's some moderate pain now. But as
   time goes on, we'll see more (and more varied) cases that
   will make tightening harder in the future. So there's
   some argument for putting rules in place _now_, before
   users grow more cases that violate them.

   Again, this is trading pain now for hypothetical benefit
   in the future. And if we try hard in the future to keep
   our tightening to a minimum (i.e., rejecting true
   maliciousness without hurting broken-but-not-evil repos),
   then that reduces even the hypothetical benefit.

Considering both sets of arguments, it makes sense to loosen
this check for now.

Note that we have to tweak the test in t7415 since fsck will
no longer consider this a fatal error. But we still check
that it reports the warning, and that we don't get the
spurious error from the config code.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-16 10:57:23 -07:00
Jeff King 0d68764d94 fsck: split ".gitmodules too large" error from parse failure
Since ed8b10f631 (fsck: check .gitmodules content,
2018-05-02), we'll report a gitmodulesParse error for two
conditions:

  - a .gitmodules entry is not syntactically valid

  - a .gitmodules entry is larger than core.bigFileThreshold

with the intent that we can detect malicious files and
protect downstream clients. E.g., from the issue in
0383bbb901 (submodule-config: verify submodule names as
paths, 2018-04-30).

But these conditions are actually quite different with
respect to that bug:

 - a syntactically invalid file cannot trigger the problem,
   as the victim would barf before hitting the problematic
   code

 - a too-big .gitmodules _can_ trigger the problem. Even
   though it is obviously silly to have a 500MB .gitmodules
   file, the submodule code will happily parse it if you
   have enough memory.

So it may be reasonable to configure their severity
separately. Let's add a new class for the "too large" case
to allow that.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-16 10:57:22 -07:00
Ramsay Jones fb16287719 fsck: check skiplist for object in fsck_blob()
Since commit ed8b10f631 ("fsck: check .gitmodules content", 2018-05-02),
fsck will issue an error message for '.gitmodules' content that cannot
be parsed correctly. This is the case, even when the corresponding blob
object has been included on the skiplist. For example, using the cgit
repository, we see the following:

  $ git fsck
  Checking object directories: 100% (256/256), done.
  error: bad config line 5 in blob .gitmodules
  error in blob 51dd1eff1edc663674df9ab85d2786a40f7ae3a5: gitmodulesParse: could not parse gitmodules blob
  Checking objects: 100% (6626/6626), done.
  $

  $ git config fsck.skiplist '.git/skip'
  $ echo 51dd1eff1edc663674df9ab85d2786a40f7ae3a5 >.git/skip
  $

  $ git fsck
  Checking object directories: 100% (256/256), done.
  error: bad config line 5 in blob .gitmodules
  Checking objects: 100% (6626/6626), done.
  $

Note that the error message issued by the config parser is still
present, despite adding the object-id of the blob to the skiplist.

One solution would be to provide a means of suppressing the messages
issued by the config parser. However, given that (logically) we are
asking fsck to ignore this object, a simpler approach is to just not
call the config parser if the object is to be skipped. Add a check to
the 'fsck_blob()' processing function, to determine if the object is
on the skiplist and, if so, exit the function early.

Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-03 09:49:44 -07:00
Jeff King de6bd9e3ea fsck: silence stderr when parsing .gitmodules
If there's a parsing error we'll already report it via the
usual fsck report() function (or not, if the user has asked
to skip this object or warning type). The error message from
the config parser just adds confusion. Let's suppress it.

Note that we didn't test this case at all, so I've added
coverage in t7415. We may end up toning down or removing
this fsck check in the future. So take this test as checking
what happens now with a focus on stderr, and not any
ironclad guarantee that we must detect and report parse
failures in the future.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-03 09:36:41 -07:00
Jeff King 4574f1aace config: add options parameter to git_config_from_mem
The underlying config parser knows how to handle a
config_options struct, but git_config_from_mem() always
passes NULL. Let's allow our callers to specify the options
struct.

We could add a "_with_options" variant, but since there are
only a handful of callers, let's just update them to pass
NULL.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-03 09:36:06 -07:00
Stefan Beller f86bcc7b2c tree: add repository argument to lookup_tree
Add a repository argument to allow the callers of lookup_tree
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.

As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-29 10:43:38 -07:00
Stefan Beller da14a7ff99 blob: add repository argument to lookup_blob
Add a repository argument to allow the callers of lookup_blob
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.

As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-29 10:43:38 -07:00
Stefan Beller 109cd76dd3 object: add repository argument to parse_object
Add a repository argument to allow the callers of parse_object
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.

As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-29 10:43:38 -07:00
Junio C Hamano b16b60f71b Merge branch 'sb/object-store-grafts' into sb/object-store-lookup
* sb/object-store-grafts:
  commit: allow lookup_commit_graft to handle arbitrary repositories
  commit: allow prepare_commit_graft to handle arbitrary repositories
  shallow: migrate shallow information into the object parser
  path.c: migrate global git_path_* to take a repository argument
  cache: convert get_graft_file to handle arbitrary repositories
  commit: convert read_graft_file to handle arbitrary repositories
  commit: convert register_commit_graft to handle arbitrary repositories
  commit: convert commit_graft_pos() to handle arbitrary repositories
  shallow: add repository argument to is_repository_shallow
  shallow: add repository argument to check_shallow_file_for_update
  shallow: add repository argument to register_shallow
  shallow: add repository argument to set_alternate_shallow_file
  commit: add repository argument to lookup_commit_graft
  commit: add repository argument to prepare_commit_graft
  commit: add repository argument to read_graft_file
  commit: add repository argument to register_commit_graft
  commit: add repository argument to commit_graft_pos
  object: move grafts to object parser
  object-store: move object access functions to object-store.h
2018-06-29 10:43:28 -07:00
Junio C Hamano ebaf0a56f3 Merge branch 'nd/complete-config-vars'
Continuing with the idea to programatically enumerate various
pieces of data required for command line completion, teach the
codebase to report the list of configuration variables
subcommands care about to help complete them.

* nd/complete-config-vars:
  completion: complete general config vars in two steps
  log-tree: allow to customize 'grafted' color
  completion: support case-insensitive config vars
  completion: keep other config var completion in camelCase
  completion: drop the hard coded list of config vars
  am: move advice.amWorkDir parsing back to advice.c
  advice: keep config name in camelCase in advice_config[]
  fsck: produce camelCase config key names
  help: add --config to list all available config
  fsck: factor out msg_id_info[] lazy initialization code
  grep: keep all colors in an array
  Add and use generic name->id mapping code for color slot parsing
2018-06-25 13:22:38 -07:00
Junio C Hamano fb6ac9e79a Merge branch 'jk/submodule-fsck-loose-fixup'
Finishing touches to a topic that already is in 'maint'.

* jk/submodule-fsck-loose-fixup:
  fsck: avoid looking at NULL blob->object
  t7415: don't bother creating commit for symlink test
2018-06-13 12:50:44 -07:00
Jeff King 47cc91310a fsck: avoid looking at NULL blob->object
Commit 159e7b080b (fsck: detect gitmodules files,
2018-05-02) taught fsck to look at the content of
.gitmodules files. If the object turns out not to be a blob
at all, we just complain and punt on checking the content.
And since this was such an obvious and trivial code path, I
didn't even bother to add a test.

Except it _does_ do one non-trivial thing, which is call the
report() function, which wants us to pass a pointer to a
"struct object". Which we don't have (we have only a "struct
object_id"). So we erroneously pass a NULL object to
report(), which gets dereferenced and causes a segfault.

It seems like we could refactor report() to just take the
object_id itself. But we pass the object pointer along to
a callback function, and indeed this ends up in
builtin/fsck.c's objreport() which does want to look at
other parts of the object (like the type).

So instead, let's just use lookup_unknown_object() to get
the real "struct object", and pass that.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-11 10:56:06 -07:00
Junio C Hamano 42c8ce1c49 Merge branch 'bc/object-id'
Conversion from uchar[20] to struct object_id continues.

* bc/object-id: (42 commits)
  merge-one-file: compute empty blob object ID
  add--interactive: compute the empty tree value
  Update shell scripts to compute empty tree object ID
  sha1_file: only expose empty object constants through git_hash_algo
  dir: use the_hash_algo for empty blob object ID
  sequencer: use the_hash_algo for empty tree object ID
  cache-tree: use is_empty_tree_oid
  sha1_file: convert cached object code to struct object_id
  builtin/reset: convert use of EMPTY_TREE_SHA1_BIN
  builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX
  wt-status: convert two uses of EMPTY_TREE_SHA1_HEX
  submodule: convert several uses of EMPTY_TREE_SHA1_HEX
  sequencer: convert one use of EMPTY_TREE_SHA1_HEX
  merge: convert empty tree constant to the_hash_algo
  builtin/merge: switch tree functions to use object_id
  builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo
  sha1-file: add functions for hex empty tree and blob OIDs
  builtin/receive-pack: avoid hard-coded constants for push certs
  diff: specify abbreviation size in terms of the_hash_algo
  upload-pack: replace use of several hard-coded constants
  ...
2018-05-30 14:04:10 +09:00
Junio C Hamano 7913f53b56 Sync with Git 2.17.1
* maint: (25 commits)
  Git 2.17.1
  Git 2.16.4
  Git 2.15.2
  Git 2.14.4
  Git 2.13.7
  fsck: complain when .gitmodules is a symlink
  index-pack: check .gitmodules files with --strict
  unpack-objects: call fsck_finish() after fscking objects
  fsck: call fsck_finish() after fscking objects
  fsck: check .gitmodules content
  fsck: handle promisor objects in .gitmodules check
  fsck: detect gitmodules files
  fsck: actually fsck blob data
  fsck: simplify ".git" check
  index-pack: make fsck error message more specific
  verify_path: disallow symlinks in .gitmodules
  update-index: stat updated files earlier
  verify_dotfile: mention case-insensitivity in comment
  verify_path: drop clever fallthrough
  skip_prefix: add case-insensitive variant
  ...
2018-05-29 17:10:05 +09:00
Nguyễn Thái Ngọc Duy a4a9cc19a2 fsck: produce camelCase config key names
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-29 14:51:28 +09:00
Nguyễn Thái Ngọc Duy 3ac68a93fd help: add --config to list all available config
Sometimes it helps to list all available config vars so the user can
search for something they want. The config man page can also be used
but it's harder to search if you want to focus on the variable name,
for example.

This is not the best way to collect the available config since it's
not precise. Ideally we should have a centralized list of config in C
code (pretty much like 'struct option'), but that's a lot more work.
This will do for now.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-29 14:51:28 +09:00
Nguyễn Thái Ngọc Duy a46baac61e fsck: factor out msg_id_info[] lazy initialization code
This array will be used by some other function than parse_msg_id() in
the following commit. Factor out this prep code so it could be called
from that one.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-29 14:51:28 +09:00
Junio C Hamano c89b6e136e Merge branch 'ds/lazy-load-trees'
The code has been taught to use the duplicated information stored
in the commit-graph file to learn the tree object name for a commit
to avoid opening and parsing the commit object when it makes sense
to do so.

* ds/lazy-load-trees:
  coccinelle: avoid wrong transformation suggestions from commit.cocci
  commit-graph: lazy-load trees for commits
  treewide: replace maybe_tree with accessor methods
  commit: create get_commit_tree() method
  treewide: rename tree to maybe_tree
2018-05-23 14:38:13 +09:00
Jeff King b7b1fca175 fsck: complain when .gitmodules is a symlink
We've recently forbidden .gitmodules to be a symlink in
verify_path(). And it's an easy way to circumvent our fsck
checks for .gitmodules content. So let's complain when we
see it.

Signed-off-by: Jeff King <peff@peff.net>
2018-05-21 23:55:12 -04:00
Jeff King ed8b10f631 fsck: check .gitmodules content
This patch detects and blocks submodule names which do not
match the policy set forth in submodule-config. These should
already be caught by the submodule code itself, but putting
the check here means that newer versions of Git can protect
older ones from malicious entries (e.g., a server with
receive.fsckObjects will block the objects, protecting
clients which fetch from it).

As a side effect, this means fsck will also complain about
.gitmodules files that cannot be parsed (or were larger than
core.bigFileThreshold).

Signed-off-by: Jeff King <peff@peff.net>
2018-05-21 23:55:12 -04:00
Jeff King 2738744426 fsck: handle promisor objects in .gitmodules check
If we have a tree that points to a .gitmodules blob but
don't have that blob, we can't check its contents. This
produces an fsck error when we encounter it.

But in the case of a promisor object, this absence is
expected, and we must not complain.  Note that this can
technically circumvent our transfer.fsckObjects check.
Imagine a client fetches a tree, but not the matching
.gitmodules blob. An fsck of the incoming objects will show
that we don't have enough information. Later, we do fetch
the actual blob. But we have no idea that it's a .gitmodules
file.

The only ways to get around this would be to re-scan all of
the existing trees whenever new ones enter (which is
expensive), or to somehow persist the gitmodules_found set
between fsck runs (which is complicated).

In practice, it's probably OK to ignore the problem. Any
repository which has all of the objects (including the one
serving the promisor packs) can perform the checks. Since
promisor packs are inherently about a hierarchical topology
in which clients rely on upstream repositories, those
upstream repositories can protect all of their downstream
clients from broken objects.

Signed-off-by: Jeff King <peff@peff.net>
2018-05-21 23:55:12 -04:00
Jeff King 159e7b080b fsck: detect gitmodules files
In preparation for performing fsck checks on .gitmodules
files, this commit plumbs in the actual detection of the
files. Note that unlike most other fsck checks, this cannot
be a property of a single object: we must know that the
object is found at a ".gitmodules" path at the root tree of
a commit.

Since the fsck code only sees one object at a time, we have
to mark the related objects to fit the puzzle together. When
we see a commit we mark its tree as a root tree, and when
we see a root tree with a .gitmodules file, we mark the
corresponding blob to be checked.

In an ideal world, we'd check the objects in topological
order: commits followed by trees followed by blobs. In that
case we can avoid ever loading an object twice, since all
markings would be complete by the time we get to the marked
objects. And indeed, if we are checking a single packfile,
this is the order in which Git will generally write the
objects. But we can't count on that:

  1. git-fsck may show us the objects in arbitrary order
     (loose objects are fed in sha1 order, but we may also
     have multiple packs, and we process each pack fully in
     sequence).

  2. The type ordering is just what git-pack-objects happens
     to write now. The pack format does not require a
     specific order, and it's possible that future versions
     of Git (or a custom version trying to fool official
     Git's fsck checks!) may order it differently.

  3. We may not even be fscking all of the relevant objects
     at once. Consider pushing with transfer.fsckObjects,
     where one push adds a blob at path "foo", and then a
     second push adds the same blob at path ".gitmodules".
     The blob is not part of the second push at all, but we
     need to mark and check it.

So in the general case, we need to make up to three passes
over the objects: once to make sure we've seen all commits,
then once to cover any trees we might have missed, and then
a final pass to cover any .gitmodules blobs we found in the
second pass.

We can simplify things a bit by loosening the requirement
that we find .gitmodules only at root trees. Technically
a file like "subdir/.gitmodules" is not parsed by Git, but
it's not unreasonable for us to declare that Git is aware of
all ".gitmodules" files and make them eligible for checking.
That lets us drop the root-tree requirement, which
eliminates one pass entirely. And it makes our worst case
much better: instead of potentially queueing every root tree
to be re-examined, the worst case is that we queue each
unique .gitmodules blob for a second look.

This patch just adds the boilerplate to find .gitmodules
files. The actual content checks will come in a subsequent
commit.

Signed-off-by: Jeff King <peff@peff.net>
2018-05-21 23:55:12 -04:00
Jeff King 7ac4f3a007 fsck: actually fsck blob data
Because fscking a blob has always been a noop, we didn't
bother passing around the blob data. In preparation for
content-level checks, let's fix up a few things:

  1. The fsck_object() function just returns success for any
     blob. Let's a noop fsck_blob(), which we can fill in
     with actual logic later.

  2. The fsck_loose() function in builtin/fsck.c
     just threw away blob content after loading it. Let's
     hold onto it until after we've called fsck_object().

     The easiest way to do this is to just drop the
     parse_loose_object() helper entirely. Incidentally,
     this also fixes a memory leak: if we successfully
     loaded the object data but did not parse it, we would
     have left the function without freeing it.

  3. When fsck_loose() loads the object data, it
     does so with a custom read_loose_object() helper. This
     function streams any blobs, regardless of size, under
     the assumption that we're only checking the sha1.

     Instead, let's actually load blobs smaller than
     big_file_threshold, as the normal object-reading
     code-paths would do. This lets us fsck small files, and
     a NULL return is an indication that the blob was so big
     that it needed to be streamed, and we can pass that
     information along to fsck_blob().

Signed-off-by: Jeff King <peff@peff.net>
2018-05-21 23:55:12 -04:00
Jeff King ed9c322062 fsck: simplify ".git" check
There's no need for us to manually check for ".git"; it's a
subset of the other filesystem-specific tests. Dropping it
makes our code slightly shorter. More importantly, the
existing code may make a reader wonder why ".GIT" is not
covered here, and whether that is a bug (it isn't, as it's
also covered in the filesystem-specific tests).

Signed-off-by: Jeff King <peff@peff.net>
2018-05-21 23:55:12 -04:00
Jonathan Nieder 1f93ecd1ab commit: add repository argument to lookup_commit_graft
Add a repository argument to allow callers of lookup_commit_graft to
be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.

As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-18 08:13:10 +09:00
Stefan Beller cbd53a2193 object-store: move object access functions to object-store.h
This should make these functions easier to find and cache.h less
overwhelming to read.

In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file

As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise.  It would be better to #include wherever
identifiers from the header are used.  That can happen later
when we have better tooling for it.

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-16 11:42:03 +09:00
brian m. carlson c54f5ca970 fsck: convert static functions to struct object_id
Convert two static functions to use struct object_id and parse_oid_hex,
instead of relying on harcoded 20 and 40-based constants.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-02 13:59:50 +09:00
Derrick Stolee 2e27bd7731 treewide: replace maybe_tree with accessor methods
In anticipation of making trees load lazily, create a Coccinelle
script (contrib/coccinelle/commit.cocci) to ensure that all
references to the 'maybe_tree' member of struct commit are either
mutations or accesses through get_commit_tree() or
get_commit_tree_oid().

Apply the Coccinelle script to create the rest of the patch.

Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-11 10:47:16 +09:00
Derrick Stolee 891435d55d treewide: rename tree to maybe_tree
Using the commit-graph file to walk commit history removes the large
cost of parsing commits during the walk. This exposes a performance
issue: lookup_tree() takes a large portion of the computation time,
even when Git never uses those trees.

In anticipation of lazy-loading these trees, rename the 'tree' member
of struct commit to 'maybe_tree'. This serves two purposes: it hints
at the future role of possibly being NULL even if the commit has a
valid tree, and it allows for unambiguous transformation from simple
member access (i.e. commit->maybe_tree) to method access.

Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-11 10:47:16 +09:00
brian m. carlson b4f5aca40e sha1_file: convert read_sha1_file to struct object_id
Convert read_sha1_file to take a pointer to struct object_id and rename
it read_object_file.  Do the same for read_sha1_file_extended.

Convert one use in grep.c to use the new function without any other code
change, since the pointer being passed is a void pointer that is already
initialized with a pointer to struct object_id.  Update the declaration
and definitions of the modified functions, and apply the following
semantic patch to convert the remaining callers:

@@
expression E1, E2, E3;
@@
- read_sha1_file(E1.hash, E2, E3)
+ read_object_file(&E1, E2, E3)

@@
expression E1, E2, E3;
@@
- read_sha1_file(E1->hash, E2, E3)
+ read_object_file(E1, E2, E3)

@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1.hash, E2, E3, E4)
+ read_object_file_extended(&E1, E2, E3, E4)

@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1->hash, E2, E3, E4)
+ read_object_file_extended(E1, E2, E3, E4)

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-14 09:23:50 -07:00
Brandon Williams debca9d2fe object: rename function 'typename' to 'type_name'
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.

Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-02-14 13:10:05 -08:00
Junio C Hamano 6defdc9fe8 Merge branch 'rs/fsck-null-return-from-lookup'
Improve behaviour of "git fsck" upon finding a missing object.

* rs/fsck-null-return-from-lookup:
  fsck: handle NULL return of lookup_blob() and lookup_tree()
2017-10-11 14:52:23 +09:00
René Scharfe 2720f6db5d fsck: handle NULL return of lookup_blob() and lookup_tree()
lookup_blob() and lookup_tree() can return NULL if they find an object
of an unexpected type.  Accessing the object member is undefined in that
case.  Cast the result to a struct object pointer instead; we can do
that because object is the first member of all object types.  This trick
is already used in other places in the code.

An error message is already shown by object_as_type(), which is called
by the lookup functions.  The walk callback functions are expected to
handle NULL object pointers passed to them, but put_object_name() needs
a valid object, so avoid calling it without one.

Suggested-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-06 11:04:34 +09:00
Jeff King 1cf01a34ea consistently use "fallthrough" comments in switches
Gcc 7 adds -Wimplicit-fallthrough, which can warn when a
switch case falls through to the next case. The general idea
is that the compiler can't tell if this was intentional or
not, so you should annotate any intentional fall-throughs as
such, leaving it to complain about any unannotated ones.

There's a GNU __attribute__ which can be used for
annotation, but of course we'd have to #ifdef it away on
non-gcc compilers. Gcc will also recognize
specially-formatted comments, which matches our current
practice. Let's extend that practice to all of the
unannotated sites (which I did look over and verify that
they were behaving as intended).

Ideally in each case we'd actually give some reasons in the
comment about why we're falling through, or what we're
falling through to. And gcc does support that with
-Wimplicit-fallthrough=2, which relaxes the comment pattern
matching to anything that contains "fallthrough" (or a
variety of spelling variants). However, this isn't the
default for -Wimplicit-fallthrough, nor for -Wextra. In the
name of simplicity, it's probably better for us to support
the default level, which requires "fallthrough" to be the
only thing in the comment (modulo some window dressing like
"else" and some punctuation; see the gcc manual for the
complete set of patterns).

This patch suppresses all warnings due to
-Wimplicit-fallthrough. We might eventually want to add that
to the DEVELOPER Makefile knob, but we should probably wait
until gcc 7 is more widely adopted (since earlier versions
will complain about the unknown warning type).

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-22 12:49:57 +09:00
Stefan Beller 8b65a34c4a commit: convert lookup_commit_graft to struct object_id
With this patch, commit.h doesn't contain the string 'sha1' any more.

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-13 12:02:40 -07:00
Junio C Hamano 6b526ced6f Merge branch 'bc/object-id'
Conversion from uchar[20] to struct object_id continues.

* bc/object-id: (53 commits)
  object: convert parse_object* to take struct object_id
  tree: convert parse_tree_indirect to struct object_id
  sequencer: convert do_recursive_merge to struct object_id
  diff-lib: convert do_diff_cache to struct object_id
  builtin/ls-tree: convert to struct object_id
  merge: convert checkout_fast_forward to struct object_id
  sequencer: convert fast_forward_to to struct object_id
  builtin/ls-files: convert overlay_tree_on_cache to object_id
  builtin/read-tree: convert to struct object_id
  sha1_name: convert internals of peel_onion to object_id
  upload-pack: convert remaining parse_object callers to object_id
  revision: convert remaining parse_object callers to object_id
  revision: rename add_pending_sha1 to add_pending_oid
  http-push: convert process_ls_object and descendants to object_id
  refs/files-backend: convert many internals to struct object_id
  refs: convert struct ref_update to use struct object_id
  ref-filter: convert some static functions to struct object_id
  Convert struct ref_array_item to struct object_id
  Convert the verify_pack callback to struct object_id
  Convert lookup_tag to struct object_id
  ...
2017-05-29 12:34:43 +09:00
brian m. carlson c251c83df2 object: convert parse_object* to take struct object_id
Make parse_object, parse_object_or_die, and parse_object_buffer take a
pointer to struct object_id.  Remove the temporary variables inserted
earlier, since they are no longer necessary.  Transform all of the
callers using the following semantic patch:

@@
expression E1;
@@
- parse_object(E1.hash)
+ parse_object(&E1)

@@
expression E1;
@@
- parse_object(E1->hash)
+ parse_object(E1)

@@
expression E1, E2;
@@
- parse_object_or_die(E1.hash, E2)
+ parse_object_or_die(&E1, E2)

@@
expression E1, E2;
@@
- parse_object_or_die(E1->hash, E2)
+ parse_object_or_die(E1, E2)

@@
expression E1, E2, E3, E4, E5;
@@
- parse_object_buffer(E1.hash, E2, E3, E4, E5)
+ parse_object_buffer(&E1, E2, E3, E4, E5)

@@
expression E1, E2, E3, E4, E5;
@@
- parse_object_buffer(E1->hash, E2, E3, E4, E5)
+ parse_object_buffer(E1, E2, E3, E4, E5)

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-08 15:12:58 +09:00
brian m. carlson 740ee055c6 Convert lookup_tree to struct object_id
Convert the lookup_tree function to take a pointer to struct object_id.

The commit was created with manual changes to tree.c, tree.h, and
object.c, plus the following semantic patch:

@@
@@
- lookup_tree(EMPTY_TREE_SHA1_BIN)
+ lookup_tree(&empty_tree_oid)

@@
expression E1;
@@
- lookup_tree(E1.hash)
+ lookup_tree(&E1)

@@
expression E1;
@@
- lookup_tree(E1->hash)
+ lookup_tree(E1)

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-08 15:12:57 +09:00
brian m. carlson 3aca1fc6c9 Convert lookup_blob to struct object_id
Convert lookup_blob to take a pointer to struct object_id.

The commit was created with manual changes to blob.c and blob.h, plus
the following semantic patch:

@@
expression E1;
@@
- lookup_blob(E1.hash)
+ lookup_blob(&E1)

@@
expression E1;
@@
- lookup_blob(E1->hash)
+ lookup_blob(E1)

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-08 15:12:57 +09:00
Johannes Schindelin 1aeb7e756c parse_timestamp(): specify explicitly where we parse timestamps
Currently, Git's source code represents all timestamps as `unsigned
long`. In preparation for using a more appropriate data type, let's
introduce a symbol `parse_timestamp` (currently being defined to
`strtoul`) where appropriate, so that we can later easily switch to,
say, use `strtoull()` instead.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-04-23 20:19:15 -07:00
brian m. carlson 910650d2f8 Rename sha1_array to oid_array
Since this structure handles an array of object IDs, rename it to struct
oid_array.  Also rename the accessor functions and the initialization
constant.

This commit was produced mechanically by providing non-Documentation
files to the following Perl one-liners:

    perl -pi -E 's/struct sha1_array/struct oid_array/g'
    perl -pi -E 's/\bsha1_array_/oid_array_/g'
    perl -pi -E 's/SHA1_ARRAY_INIT/OID_ARRAY_INIT/g'

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-31 08:33:56 -07:00
brian m. carlson 5d3206d501 Convert sha1_array_lookup to take struct object_id
Convert this function by changing the declaration and definition and
applying the following semantic patch to update the callers:

@@
expression E1, E2;
@@
- sha1_array_lookup(E1, E2.hash)
+ sha1_array_lookup(E1, &E2)

@@
expression E1, E2;
@@
- sha1_array_lookup(E1, E2->hash)
+ sha1_array_lookup(E1, E2)

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-31 08:33:55 -07:00
brian m. carlson 98a72ddc12 Make sha1_array_append take a struct object_id *
Convert the callers to pass struct object_id by changing the function
declaration and definition and applying the following semantic patch:

@@
expression E1, E2;
@@
- sha1_array_append(E1, E2.hash)
+ sha1_array_append(E1, &E2)

@@
expression E1, E2;
@@
- sha1_array_append(E1, E2->hash)
+ sha1_array_append(E1, E2)

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-31 08:33:55 -07:00
brian m. carlson ee3051bd23 sha1-array: convert internal storage for struct sha1_array to object_id
Make the internal storage for struct sha1_array use an array of struct
object_id internally.  Update the users of this struct which inspect its
internals.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-28 09:59:34 -07:00
brian m. carlson 365c27fbff fsck: convert init_skiplist to struct object_id
Convert a hardcoded constant buffer size to a use of GIT_MAX_HEXSZ, and
use parse_oid_hex to reduce the dependency on the size of the hash.
This function is a caller of sha1_array_append, which will be converted
later.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-28 09:59:33 -07:00
Jeff King a2b22854bd fsck: lazily load types under --connectivity-only
The recent fixes to "fsck --connectivity-only" load all of
the objects with their correct types. This keeps the
connectivity-only code path close to the regular one, but it
also introduces some unnecessary inefficiency. While getting
the type of an object is cheap compared to actually opening
and parsing the object (as the non-connectivity-only case
would do), it's still not free.

For reachable non-blob objects, we end up having to parse
them later anyway (to see what they point to), making our
type lookup here redundant.

For unreachable objects, we might never hit them at all in
the reachability traversal, making the lookup completely
wasted. And in some cases, we might have quite a few
unreachable objects (e.g., when alternates are used for
shared object storage between repositories, it's normal for
there to be objects reachable from other repositories but
not the one running fsck).

The comment in mark_object_for_connectivity() claims two
benefits to getting the type up front:

  1. We need to know the types during fsck_walk(). (And not
     explicitly mentioned, but we also need them when
     printing the types of broken or dangling commits).

     We can address this by lazy-loading the types as
     necessary. Most objects never need this lazy-load at
     all, because they fall into one of these categories:

       a. Reachable from our tips, and are coerced into the
	  correct type as we traverse (e.g., a parent link
	  will call lookup_commit(), which converts OBJ_NONE
	  to OBJ_COMMIT).

       b. Unreachable, but not at the tip of a chunk of
          unreachable history. We only mention the tips as
	  "dangling", so an unreachable commit which links
	  to hundreds of other objects needs only report the
	  type of the tip commit.

  2. It serves as a cross-check that the coercion in (1a) is
     correct (i.e., we'll complain about a parent link that
     points to a blob). But we get most of this for free
     already, because right after coercing, we'll parse any
     non-blob objects. So we'd notice then if we expected a
     commit and got a blob.

     The one exception is when we expect a blob, in which
     case we never actually read the object contents.

     So this is a slight weakening, but given that the whole
     point of --connectivity-only is to sacrifice some data
     integrity checks for speed, this seems like an
     acceptable tradeoff.

Here are before and after timings for an extreme case with
~5M reachable objects and another ~12M unreachable (it's the
torvalds/linux repository on GitHub, connected to shared
storage for all of the other kernel forks):

  [before]
  $ time git fsck --no-dangling --connectivity-only
  real	3m4.323s
  user	1m25.121s
  sys	1m38.710s

  [after]
  $ time git fsck --no-dangling --connectivity-only
  real	0m51.497s
  user	0m49.575s
  sys	0m1.776s

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-26 10:51:09 -08:00