"git prune" used to largely ignore broken refs when deciding which
objects are still being used, which could spread an existing small
damage and make it a larger one.
* jk/prune-with-corrupt-refs:
refs.c: drop curate_packed_refs
repack: turn on "ref paranoia" when doing a destructive repack
prune: turn on ref_paranoia flag
refs: introduce a "ref paranoia" flag
t5312: test object deletion code paths in a corrupted repository
"git prune" used to largely ignore broken refs when deciding which
objects are still being used, which could spread an existing small
damage and make it a larger one.
* jk/prune-with-corrupt-refs:
refs.c: drop curate_packed_refs
repack: turn on "ref paranoia" when doing a destructive repack
prune: turn on ref_paranoia flag
refs: introduce a "ref paranoia" flag
t5312: test object deletion code paths in a corrupted repository
At the first look, a user may think the default version is "23". Even
with UNIX background, there's no reference anywhere close that may
indicate this is glob or regex.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most operations that iterate over refs are happy to ignore
broken cruft. However, some operations should be performed
with knowledge of these broken refs, because it is better
for the operation to choke on a missing object than it is to
silently pretend that the ref did not exist (e.g., if we are
computing the set of reachable tips in order to prune
objects).
These processes could just call for_each_rawref, except that
ref iteration is often hidden behind other interfaces. For
instance, for a destructive "repack -ad", we would have to
inform "pack-objects" that we are destructive, and then it
would in turn have to tell the revision code that our
"--all" should include broken refs.
It's much simpler to just set a global for "dangerous"
operations that includes broken refs in all iterations.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should improve readability. Compare "thislongname" and
"thisLongName". The following keys are left in unchanged. We can
decide what to do with them later.
- am.keepcr
- core.autocrlf .safecrlf .trustctime
- diff.dirstat .noprefix
- gitcvs.usecrlfattr
- gui.blamehistoryctx .trustmtime
- pull.twohead
- receive.autogc
- sendemail.signedoffbycc .smtpsslcertpath .suppresscc
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Credential helpers are asked in turn until one of them give
positive response, which is cumbersome to turn off when you need to
run Git in an automated setting. The credential helper interface
learned to allow a helper to say "stop, don't ask other helpers."
Also GIT_TERMINAL_PROMPT environment can be set to false to disable
our built-in prompt mechanism for passwords.
* jk/credential-quit:
prompt: respect GIT_TERMINAL_PROMPT to disable terminal prompts
credential: let helpers tell us to quit
Allow passing extra set of arguments when ssh is invoked to create
an encrypted & authenticated connection by introducing a new environment
variable GIT_SSH_COMMAND, whose contents is interpreted by shells.
This is not possible with existing GIT_SSH mechanism whose
invocation bypasses shells, which was designed more to match what
other programs with similar variables did, not necessarily to be
more useful.
* tq/git-ssh-command:
git_connect: set ssh shell command in GIT_SSH_COMMAND
If you run git as part of an automated system, you might
prefer git to die rather than try to issue a prompt on the
terminal (because there would be nobody to see it and
respond, and the process would hang forever).
This usually works out of the box because getpass() (and our
more featureful replacements) will fail when there is no
tty, but this does not cover all cases. For example, a batch
system run via ssh might have a tty, even when the user does
not expect it.
Let's provide an environment variable the user can set to
avoid even trying to touch the tty at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout --to" sets up a new working directory with a .git file
pointing to $GIT_DIR/worktrees/<id>. It then executes "git checkout"
again on the new worktree with the same arguments except "--to" is
taken out. The second checkout execution, which is not contaminated
with any info from the current repository, will actually check out and
everything that normal "git checkout" does.
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable is intended to support multiple working directories
attached to a repository. Such a repository may have a main working
directory, created by either "git init" or "git clone" and one or more
linked working directories. These working directories and the main
repository share the same repository directory.
In linked working directories, $GIT_COMMON_DIR must be defined to point
to the real repository directory and $GIT_DIR points to an unused
subdirectory inside $GIT_COMMON_DIR. File locations inside the
repository are reorganized from the linked worktree view point:
- worktree-specific such as HEAD, logs/HEAD, index, other top-level
refs and unrecognized files are from $GIT_DIR.
- the rest like objects, refs, info, hooks, packed-refs, shallow...
are from $GIT_COMMON_DIR (except info/sparse-checkout, but that's
a separate patch)
Scripts are supposed to retrieve paths in $GIT_DIR with "git rev-parse
--git-path", which will take care of "$GIT_DIR vs $GIT_COMMON_DIR"
business.
The redirection is done by git_path(), git_pathdup() and
strbuf_git_path(). The selected list of paths goes to $GIT_COMMON_DIR,
not the other way around in case a developer adds a new
worktree-specific file and it's accidentally promoted to be shared
across repositories (this includes unknown files added by third party
commands)
The list of known files that belong to $GIT_DIR are:
ADD_EDIT.patch BISECT_ANCESTORS_OK BISECT_EXPECTED_REV BISECT_LOG
BISECT_NAMES CHERRY_PICK_HEAD COMMIT_MSG FETCH_HEAD HEAD MERGE_HEAD
MERGE_MODE MERGE_RR NOTES_EDITMSG NOTES_MERGE_WORKTREE ORIG_HEAD
REVERT_HEAD SQUASH_MSG TAG_EDITMSG fast_import_crash_* logs/HEAD
next-index-* rebase-apply rebase-merge rsync-refs-* sequencer/*
shallow_*
Path mapping is NOT done for git_path_submodule(). Multi-checkouts are
not supported as submodules.
Helped-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It may be impractical to install a wrapper script for GIT_SSH
when additional parameters need to be passed. Provide an alternative
way of specifying a shell command to be run, including command line
arguments, by means of the GIT_SSH_COMMAND environment variable,
which behaves like GIT_SSH but is passed to the shell.
The special circuitry to modify parameters in the case of using
PuTTY's plink/tortoiseplink is activated only when using GIT_SSH;
in the case of using GIT_SSH_COMMAND, it is deliberately left up to
the user to make any required parameters adaptation before calling
the underlying ssh implementation.
Signed-off-by: Thomas Quinot <thomas@quinot.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git help everyday" to show the Everyday Git document.
* po/everyday-doc:
doc: add 'everyday' to 'git help'
doc: Makefile regularise OBSOLETE_HTML list building
doc: modernise everyday.txt wording and format in man page style
The "Everyday GIT With 20 Commands Or So" is not accessible via the
Git help system. Move everyday.txt to giteveryday.txt so that "git
help everyday" works, and create a new placeholder file everyday.html
to refer people who follow existing URLs to the updated location.
giteveryday.txt now formats well with AsciiDoc as a man page and
refreshed content to a more command modern style.
Add 'everyday' to the help --guides list and update git(1) and 5
other links to giteveryday.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a config file, you can do:
[foo]
bar
to turn the "foo.bar" boolean flag on, and you can do:
[foo]
bar=
to set "foo.bar" to the empty string. However, git's "-c"
parameter treats both:
git -c foo.bar
and
git -c foo.bar=
as the boolean flag, and there is no way to set a variable
to the empty string. This patch enables the latter form to
do that.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to http://meta.ohloh.net/2014/07/black-duck-open-hub/
the site name of ohloh changed to openhub.
Change the man page accordingly.
Signed-off-by: Stefan Beller <stefanbeller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kb/perf-trace:
api-trace.txt: add trace API documentation
progress: simplify performance measurement by using getnanotime()
wt-status: simplify performance measurement by using getnanotime()
git: add performance tracing for git's main() function to debug scripts
trace: add trace_performance facility to debug performance issues
trace: add high resolution timer function to debug performance issues
trace: add 'file:line' to all trace output
trace: move code around, in preparation to file:line output
trace: add current timestamp to all trace output
trace: disable additional trace output for unit tests
trace: add infrastructure to augment trace output with additional info
sha1_file: change GIT_TRACE_PACK_ACCESS logging to use trace API
Documentation/git.txt: improve documentation of 'GIT_TRACE*' variables
trace: improve trace performance
trace: remove redundant printf format attribute
trace: consistently name the format parameter
trace: move trace declarations from cache.h to new trace.h
Use trace_performance to measure and print execution time and command line
arguments of the entire main() function. In constrast to the shell's 'time'
utility, which measures total time of the parent process, this logs all
involved git commands recursively. This is particularly useful to debug
performance issues of scripted commands (i.e. which git commands were
called with which parameters, and how long did they execute).
Due to git's deliberate use of exit(), the implementation uses an atexit
routine rather than just adding trace_performance_since() at the end of
main().
Usage example: > GIT_TRACE_PERFORMANCE=~/git-trace.log git stash list
Creates a log file like this:
23:57:38.638765 trace.c:405 performance: 0.000310107 s: git command: 'git' 'rev-parse' '--git-dir'
23:57:38.644387 trace.c:405 performance: 0.000261759 s: git command: 'git' 'rev-parse' '--show-toplevel'
23:57:38.646207 trace.c:405 performance: 0.000304468 s: git command: 'git' 'config' '--get-colorbool' 'color.interactive'
23:57:38.648491 trace.c:405 performance: 0.000241667 s: git command: 'git' 'config' '--get-color' 'color.interactive.help' 'red bold'
23:57:38.650465 trace.c:405 performance: 0.000243063 s: git command: 'git' 'config' '--get-color' '' 'reset'
23:57:38.654850 trace.c:405 performance: 0.025126313 s: git command: 'git' 'stash' 'list'
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes GIT_TRACE_PACK_ACCESS functionality as follows:
* supports the same options as GIT_TRACE (e.g. printing to stderr)
* no longer supports relative paths
* appends to the trace file rather than overwriting
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Separate GIT_TRACE description into what it prints and how to configure
where trace output is printed to. Change other GIT_TRACE_* descriptions to
refer to GIT_TRACE.
Add descriptions for GIT_TRACE_SETUP and GIT_TRACE_SHALLOW.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is expected to be the final maintenance release for 1.9 series,
merging the remaining fixes that are relevant and are already in 2.0.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The third maintenance release for Git 1.9; contains all the fixes
that are scheduled to appear in Git 2.0 since 1.9.2.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The second maintenance release for Git 1.9; contains all the fixes
that are scheduled to appear in Git 2.0.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The version numbering scheme has changed since Git 1.9 and we
dropped the third dewey-decimal from the traditional numbering
(e.g. both 1.8.4 and 1.8.5 were major feature releases). This
release 1.9.1 is the first maintenance relase for Git 1.9.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Respect a GIT_INDEX_VERSION environment variable, when a new index is
initialized. Setting the environment variable will not cause existing
index files to be converted to another format, but will only affect
newly written index files. This can be used to initialize repositories
with index-v4.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Show the total number of paths and the number of paths shown so far
when "git difftool" prompts to launch an external diff tool, which
would give users some sense of progress.
* zk/difftool-counts:
diff.c: fix some recent whitespace style violations
difftool: display the number of files in the diff queue in the prompt
When --prompt option is set, git-difftool displays a prompt for each
modified file to be viewed in an external diff program. At that
point, it could be useful to display a counter and the total number
of files in the diff queue.
Below is the current difftool prompt for the first of 5 modified files:
Viewing: 'diff.c'
Launch 'vimdiff' [Y/n]:
Consider the modified prompt:
Viewing (1/5): 'diff.c'
Launch 'vimdiff' [Y/n]:
The current GIT_EXTERNAL_DIFF mechanism does not tell the number of
paths in the diff queue nor the current counter. To make this
"counter/total" info available for GIT_EXTERNAL_DIFF programs
without breaking existing ones by doing the following:
- Keep track of the number of paths shown so far in diff_options;
- Export two new environment variables from run_external_diff() to
show the total number of paths (from diff_queue_struct) and the
current value of the counter (from diff_options); and
- Update git-difftool--helper to use these two environment variables.
Signed-off-by: Zoltan Klinger <zoltan.klinger@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document rules to use GIT_REFLOG_ACTION variable in the scripted
Porcelain. git-rebase--interactive locally violates them, but it
is a leaf user that does not call out to or dot-source other
scripts, so it does not urgently need to be fixed.
* jc/reflog-doc:
setup_reflog_action: document the rules for using GIT_REFLOG_ACTION
Labeled lists require a double colon.
[jc] I eyeballed the output from
git grep '[^:]:$' Documentation/\*.txt
and the patch fixes all breakages of this kind.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like "make -C <directory>", make "git -C <directory> ..." to
go there before doing anything else.
* nr/git-cd-to-a-directory:
t0056: "git -C" test updates
git: run in a directory given with -C option
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
This is similar in spirit to "make -C dir ..." and "tar -C dir ...".
It takes more keypresses to invoke git command in a different
directory without leaving the current directory:
1. (cd ~/foo && git status)
git --git-dir=~/foo/.git --work-dir=~/foo status
GIT_DIR=~/foo/.git GIT_WORK_TREE=~/foo git status
2. (cd ../..; git grep foo)
3. for d in d1 d2 d3; do (cd $d && git svn rebase); done
The methods shown above are acceptable for scripting but are too
cumbersome for quick command line invocations.
With this new option, the above can be done with fewer keystrokes:
1. git -C ~/foo status
2. git -C ../.. grep foo
3. for d in d1 d2 d3; do git -C $d svn rebase; done
A new test script is added to verify the behavior of this option with
other path-related options like --git-dir and --work-tree.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when the core tutorial was written, `log` and `whatchanged`
were scripted Porcelains. In the "Inspecting Changes" section that
talks about the plumbing commands in the diff family, it made sense
to use `log` and `whatchanged` as good examples of the use of these
plumbing commands, and because even these scripted Porcelains were
novelty (there wasn't the new end-user tutorial written), it made
some sense to illustrate uses of the `git log` (and `git
whatchanged`) scripted Porcelain commands.
But we no longer have scripted `log` and `whatchanged` to serve as
examples, and this document is not where the end users learn what
`git log` command is about. Stop at briefly mentioning the
possibility of combining rev-list with diff-tree to build your own
log, and leave the end-user documentation of `log` to the new
tutorial and the user manual.
Also resurrect the last version of `git-log`, `git-whatchanged`, and
`git-show` to serve as examples to contrib/examples/ directory.
While at it, remove 'whatchanged' from a list of sample commands
that are affected by GIT_FLUSH environment variable. This is not
meant to be an exhaustive list but as a list of typical ones, and an
old command that is kept primarily for backward compatibility does
not belong to it.
Helped-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
:(glob)path differs from plain pathspec that it uses wildmatch with
WM_PATHNAME while the other uses fnmatch without FNM_PATHNAME. The
difference lies in how '*' (and '**') is processed.
With the introduction of :(glob) and :(literal) and their global
options --[no]glob-pathspecs, the user can:
- make everything literal by default via --noglob-pathspecs
--literal-pathspecs cannot be used for this purpose as it
disables _all_ pathspec magic.
- individually turn on globbing with :(glob)
- make everything globbing by default via --glob-pathspecs
- individually turn off globbing with :(literal)
The implication behind this is, there is no way to gain the default
matching behavior (i.e. fnmatch without FNM_PATHNAME). You either get
new globbing or literal. The old fnmatch behavior is considered
deprecated and discouraged to use.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--literal-pathspecs and its equivalent environment variable are
probably used for scripting. In that setting, pathspec magic may be
unwanted. Disabling globbing in individual pathspec can be done via
:(literal) magic.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The set_reflog_action helper (in git-sh-setup) is designed to be
used once at the very top of a program, like this in "git am", for
example:
set_reflog_action am
The helper function sets the given string to GIT_REFLOG_ACTION only
when GIT_REFLOG_ACTION is not yet set. Thanks to this, "git am",
when run as the top-level program, will use "am" in GIT_REFLOG_ACTION
and the reflog entries made by whatever it does will record the
updates of refs done by "am".
Because of the conditional assignment, when "git am" is run as a
subprogram (i.e. an implementation detail) of "git rebase" that
already sets GIT_REFLOG_ACTION to its own name, the call in "git am"
to the helper function at the beginning will *not* have any effect.
So "git rebase" can do this:
set_reflog_action rebase
... do its own preparation, like checking out "onto" commit
... decide to do "format-patch" to "am" pipeline
git format-patch --stdout >mbox
git am mbox
and the reflog entries made inside "git am" invocation will say
"rebase", not "am".
Calls to "git" commands that update refs would use GIT_REFLOG_ACTION
to record who did that update. Most such calls in scripted Porcelains
do not define custom reflog message and rely on GIT_REFLOG_ACTION to
contain its (or its caller's, when it is called as a subprogram) name.
If a scripted Porcelain wants to record a custom reflog message for
a single invocation of "git" command (e.g. when "git rebase" uses
"git checkout" to detach HEAD at the commit a series is to be
replayed on), it needs to set GIT_REFLOG_ACTION to the custom
message and export it while calling the "git" command, but such an
assignment must be restricted to that single "git" invocation and
should not be left behind to affect later codepath.
Document the rules to avoid future confusion.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These days, "git --work-tree=there cmd" without specifying an
explicit --git-dir=here will do the usual discovery, but we had a
description of older behaviour in the documentation.
* cr/git-work-tree-sans-git-dir:
git.txt: remove stale comment regarding GIT_WORK_TREE
Primarily to push out two regression issues that seem to affect many
people, namely, the ".gitignore !directory" bug and "daemon cannot
read from $HOME owned by root" bug.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"This can help with debugging object negotiation or other protocol
issues."
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
5f44324 (core: log offset pack data accesses happened - 2011-07-06)
provides a way to observe pack access patterns via a config
switch. Setting an environment variable looks more obvious than a
config var, especially when you just need to _observe_, and more
inline with other tracing knobs we have.
Document it as it may be useful for remote troubleshooting.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Official support for specifying --work-tree/GIT_WORK_TREE without
--git-dir/GIT_DIR was added with v1.7.4-rc3~2^2~2. Update description
of GIT_WORK_TREE to reflect this.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enhance "check-ignore" (1.8.2 update) to work more like "check-attr"
over bidi-pipes.
* as/check-ignore:
t0008: use named pipe (FIFO) to test check-ignore streaming
Documentation: add caveats about I/O buffering for check-{attr,ignore}
check-ignore: allow incremental streaming of queries via --stdin
check-ignore: move setup into cmd_check_ignore()
check-ignore: add -n / --non-matching option
t0008: remove duplicated test fixture data
Use "SHA-1" instead of "SHA1" whenever we talk about the hash function.
When used as a programming symbol, we keep "SHA1".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check-attr and check-ignore have the potential to deadlock callers
which do not read back the output in real-time. For example, if a
caller writes N paths out and then reads N lines back in, it risks
becoming blocked on write() to check-*, and check-* is blocked on
write back to the caller. Somebody has to buffer; the pipe buffers
provide some leeway, but they are limited.
Thanks to Peff for pointing this out:
http://article.gmane.org/gmane.comp.version-control.git/220534
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, it can get called with four arguments if you happen to
be referring to a repo using the ssh:// scheme with a non-default port
number.
Signed-off-by: Dan Bornstein <danfuzz@milk.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier workaround designed to help people who list logical
directories that will not match what getcwd(3) returns in the
GIT_CEILING_DIRECTORIES had an adverse effect when it is slow to
stat and readlink a directory component of an element listed on it.
* mh/maint-ceil-absolute:
Provide a mechanism to turn off symlink resolution in ceiling paths
Commit 1b77d83cab 'setup_git_directory_gently_1(): resolve symlinks
in ceiling paths' changed the setup code to resolve symlinks in the
entries in GIT_CEILING_DIRECTORIES. Because those entries are
compared textually to the symlink-resolved current directory, an
entry in GIT_CEILING_DIRECTORIES that contained a symlink would have
no effect. It was known that this could cause performance problems
if the symlink resolution *itself* touched slow filesystems, but it
was thought that such use cases would be unlikely. The intention of
the earlier change was to deal with a case when the user has this:
GIT_CEILING_DIRECTORIES=/home/gitster
but in reality, /home/gitster is a symbolic link to somewhere else,
e.g. /net/machine/home4/gitster. A textual comparison between the
specified value /home/gitster and the location getcwd(3) returns
would not help us, but readlink("/home/gitster") would still be
fast.
After this change was released, Anders Kaseorg <andersk@mit.edu>
reported:
> [...] my computer has been acting so slow when I’m not connected to
> the network. I put various network filesystem paths in
> $GIT_CEILING_DIRECTORIES, such as
> /afs/athena.mit.edu/user/a/n/andersk (to avoid hitting its parents
> /afs/athena.mit.edu, /afs/athena.mit.edu/user/a, and
> /afs/athena.mit.edu/user/a/n which all live in different AFS
> volumes). Now when I’m not connected to the network, every
> invocation of Git, including the __git_ps1 in my shell prompt, waits
> for AFS to timeout.
To allow users to work around this problem, give them a mechanism to
turn off symlink resolution in GIT_CEILING_DIRECTORIES entries. All
the entries that follow an empty entry will not be checked for symbolic
links and used literally in comparison. E.g. with these:
GIT_CEILING_DIRECTORIES=:/foo/bar:/xyzzy or
GIT_CEILING_DIRECTORIES=/foo/bar::/xyzzy
we will not readlink("/xyzzy") because it comes after an empty entry.
With the former (but not with the latter), "/foo/bar" comes after an
empty entry, and we will not readlink it, either.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old Git version where it appeared is now useful only to historians,
not to normal users. Also, the text was mentioning only the per-repo
config file, but this is a good place to teach that customization can
also be made per-user.
While at it, remove a now-defunct e-mail from an example.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the earlier days, we used to spell the name of the system as GIT,
to simulate as if it were typeset with capital G and IT in small
caps. Later we stopped doing so at around 1.6.5 days.
Let's stop doing so throughout the documentation. The name to refer
to the whole system (and the concept it embodies) is "Git"; the
command end-users type is "git". And document this in the coding
guideline.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When attempting to read the XDG-style $HOME/.config/git/config and
finding that $HOME/.config/git is a file, we gave a wrong error
message, instead of treating the case as "a custom config file does
not exist there" and moving on.
* jn/warn-on-inaccessible-loosen:
config: exit on error accessing any config file
doc: advertise GIT_CONFIG_NOSYSTEM
config: treat user and xdg config permission problems as errors
config, gitignore: failure to access with ENOTDIR is ok
Deal with a situation where .config/git is a file and we notice
.config/git/config is not readable due to ENOTDIR, not ENOENT.
* jn/warn-on-inaccessible-loosen:
config: exit on error accessing any config file
doc: advertise GIT_CONFIG_NOSYSTEM
config: treat user and xdg config permission problems as errors
config, gitignore: failure to access with ENOTDIR is ok
Allow scripts to feed literal paths to commands that take
pathspecs, by disabling wildcard globbing.
* jk/pathspec-literal:
add global --literal-pathspecs option
Conflicts:
dir.c
We earlier removed a link to list of contributors that pointed to a
defunct page; let's use a working one from Ohloh.net to replace it
instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git takes pathspec arguments in many places to limit the
scope of an operation. These pathspecs are treated not as
literal paths, but as glob patterns that can be fed to
fnmatch. When a user is giving a specific pattern, this is a
nice feature.
However, when programatically providing pathspecs, it can be
a nuisance. For example, to find the latest revision which
modified "$foo", one can use "git rev-list -- $foo". But if
"$foo" contains glob characters (e.g., "f*"), it will
erroneously match more entries than desired. The caller
needs to quote the characters in $foo, and even then, the
results may not be exactly the same as with a literal
pathspec. For instance, the depth checks in
match_pathspec_depth do not kick in if we match via fnmatch.
This patch introduces a global command-line option (i.e.,
one for "git" itself, not for specific commands) to turn
this behavior off. It also has a matching environment
variable, which can make it easier if you are a script or
porcelain interface that is going to issue many such
commands.
This option cannot turn off globbing for particular
pathspecs. That could eventually be done with a ":(noglob)"
magic pathspec prefix. However, that level of granularity is
more cumbersome to use for many cases, and doing ":(noglob)"
right would mean converting the whole codebase to use
"struct pathspec", as the usual "const char **pathspec"
cannot represent extra per-item flags.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike other environment variables (e.g. GIT_WORK_TREE, GIT_NAMESPACE),
the Documentation/git.txt file did not mention that the GIT_DIR
environment variable can also be set using the --git-dir command line
option.
Signed-off-by: Manlio Perillo <manlio.perillo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We earlier removed a link to list of contributors that pointed to a
defunct page; let's use a working one from Ohloh.net to replace it
instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The linked page has not been showing the promised "more complete
list" for more than 6 months by now, and nobody has resurrected
the list there nor elsewhere since then.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a multiuser system where mortals do not have write access to /etc,
the GIT_CONFIG_NOSYSTEM variable is the best tool we have to keep
getting work done when a syntax error or other problem renders
/etc/gitconfig buggy, until the sysadmin sorts the problem out.
Noticed while experimenting with teaching git to error out when
/etc/gitconfig is unreadable.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The second paragraph in the git(1) description section were meant to
guide people who are not ready to dive into this page away from here.
Referring migrating CVS users to another page before they get
acquainted with Git was somewhat out of place. Move the reference to
the "FURTHER DOCUMENTATION" section and push that section down.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The one at kernel.org has not been updated for quite a while and
can no longer be called "the latest".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously GIT_EDITOR was not listed in git(1) "Environment Variables" section,
which could be very confusing to users. Include it in "other" subsection along
with a link to git-var(1), since that is the page that fully describes all
places where editor can be set and also their preference order.
Also, git-var(1) did not say that hardcoded fallback 'vi' may have been changed
at build time. A user could be puzzled if 'nano' pops up even when none of the
mentioned environment vars or config.editor are set. Clarify this.
Ideally, the build system should be changed to reflect the chosen fallback
editor when creating the man pages. Not sure if that is even possible though.
Signed-off-by: Rodrigo Silva (MestreLion) <linux@rodrigosilva.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The line was extended in 2dd8c3 ('git: add --info-path and --man-path
options'), and the formatted man output stopped fitting into the 80
column window.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Nguyễn Thái Ngọc Duy
Jeff King
Thomas Quinot
Philip Oakley
Stefan Beller
Karsten Blees
Jason St. John
Thomas Gummerer
Zoltan Klinger
Steffen Prohaska
Jonathan Nieder
Nazri Ramliy
Chris Rorvick
Thomas Ackermann
Adam Spiers
Dan Bornstein
Michael Haggerty
Matthieu Moy
Manlio Perillo
Miklos Vajna
Rodrigo Silva (MestreLion)
Zbigniew Jędrzejewski-Szmek