- print commands with \n
- extractDepotPathsAndChangeFromGitLog -> extractSettings, returning
dict.
- store keepRepoPath in [git-p4: ] line
- create a main() function, so git-p4 can be pychecked
- use --destination for clone destination. This simplifies logic
for --keep-path
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
On one particular system I like to keep a cluster of bare Git
repositories and spawn new-workdirs off of them. Since the bare
repositories don't have working directories associated with them
they don't have a .git/ subdirectory that hosts the repository we
are linking to.
Using a bare repository as the backing repository for a workdir
created by this script does require that the user delete core.bare
from the repository's configuration file, so that Git auto-senses
the bareness of a repository based on pathname information, and
not based on the config file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A few new configuration options grew out of the woodwork during the
1.5.2 series. Most of these are pretty easy to support a completion
of, so we do so.
I wanted to also add completion support for the <driver> part of
merge.<driver>.name but to do that we have to look at all of the
.gitattributes files and guess what the unique set of <driver>
strings would be. Since this appears to be non-trivial I'm punting
on it at this time.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
(Somewhat) recently git-log learned about --reverse (to show commits
in the opposite order) and a looong time ago I think it learned
about --raw (to show the raw diff, rather than a unified diff).
These are both useful options, so we should make them easy for the
user to complete.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Recently the git-remote command grew an update subcommand, which
can be used to execute git-fetch across multiple repositories
in a single step. These can be configured with the 'remotes.*'
configuration options, so we can offer completion for any name that
matches and appears to be useful to git-remote update.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
1) Added a note about supporting the long options for most commands,
as we have been doing so for quite some time.
2) Include a notice that these routines are covered by the GPL,
as that may not be obvious, even though they are distributed
as part of the core Git distribution.
3) Added a short section on how to send patches to the routines,
and to whom they should get sent to. Currently that is me,
as I am the active maintainer.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This was just me being silly; I put the --not option into the
completion list twice. There's no duplicates shown in the shell
as the shell removes them before showing them to the user. But we
really don't need the duplicates in the source script either.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We've had completion for git-log for quite some time, but just
today I noticed we don't have it for the new builtin shortlog
that runs git-log internally. This is indeed a handy thing to
have completion for, especially when your branch names are of
the Very-Very-Long-and-Hard/To-Type/Variety/That-Some-Use.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The diff-* programs are meant to be plumbing for the diff frontend;
most end users aren't invoking these commands directly. Consequently
we should avoid showing them as possible completions.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
[sp: Modified Jonas' original patch to keep checkout-index
as a a valid completion.]
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
applying them to a Perforce checkout. This should make it possible to apply git
commits with binary files that cannot be handled by path.
Signed-off-by: Simon Hausmann <simon@lst.de>
to use for the current import by looking at the p4 tags. The current approach of using
the log message works better.
Signed-off-by: Simon Hausmann <simon@lst.de>
it's creating a new branch from itself. It's a sensible error in general but
in the case of incremental imports we have to apply force :)
Signed-off-by: Simon Hausmann <simon@lst.de>
* maint:
format-patch: add MIME-Version header when we add content-type.
Fixed link in user-manual
import-tars: Use the "Link indicator" to identify directories
git name-rev writes beyond the end of malloc() with large generations
Documentation/branch: fix small typo in -D example
Earlier, we used the mode to determine if a name was associated with
a directory. This fails, since some tar programs do not set the mode
correctly. However, the link indicator _has_ to be set correctly.
Noticed by Chris Riddoch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Randal L. Schwartz pointed out multiple times that we should be
testing the length of the name string here, not if it is "true".
The problem is the string '0' is actually false in Perl when we
try to evaluate it in this context, as '0' is 0 numerically and
the number 0 is treated as a false value. This would cause us
to break out of the import loop early if anyone had a file or
directory named "0".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This extension allows GNU tar to process file names in excess of the 100
characters defined by the original tar standard. It does this by faking a
file, named '././@LongLink' containing the true file name, and then adding
the file with a truncated name. The idea is that tar without this
extension will write out a file with the long file name, and write the
contents into a file with truncated name.
Unfortunately, GNU tar does a lousy job at times. When truncating results
in a _directory_ name, it will happily use _that_ as a truncated name for
the file.
An example where this actually happens is gcc-4.1.2, where the full path
of the file WeThrowThisExceptionHelper.java truncates _exactly_ before the
basename. So, we have to support that ad-hoc extension.
This bug was noticed by Chris Riddoch on IRC.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
http.c: Fix problem with repeated calls of http_init
Add missing reference to GIT_COMMITTER_DATE in git-commit-tree documentation
Fix import-tars fix.
Update .mailmap with "Michael"
Do not barf on too long action description
Catch empty pathnames in trees during fsck
Don't allow empty pathnames in fast-import
import-tars: be nice to wrong directory modes
git-svn: Added 'find-rev' command
git shortlog documentation: add long options and fix a typo
This heeds advice from our resident Perl expert to make sure
the script is not confused with a string that ends with /\n
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some tars seem to have modes 0755 for directories, not 01000755. Do
not generate an empty object for them, but ignore them.
Noticed by riddochc on IRC.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The sed command that extracted the first line of the project description
didn't include the -n switch and hence the project name was being
printed twice. This was ruining the email header generation because it
was assumed that the description was only one line and was included in
the subject. This turned the subject into a two line item and
prematurely finished the header.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sometimes a non-fast-forward update doesn't add new commits, it merely
removes old commits. This patch adds support for detecting that and
outputting a more correct message.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'master' of git://repo.or.cz/git/fastimport:
fast-import: size_t vs ssize_t
fix importing of subversion tars
Don't repack existing objects in fast-import
add a / between the prefix and name fields of the tar archive if prefix
is non-empty.
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add a new configuration option clean.requireForce. If set, git-clean will
refuse to run, unless forced with the new -f option, or not acting due to -n.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
List files modifed as a part of the commit in the diff window
Support annotation of the file listed in the diff window
Support history browsing in the annotation window.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a description of the commit to the reflog using the first line of
the log message, the same way the git-commit script does it.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I'm using a variant of this update hook in a corporate environment
where we perform some validations of the commits and tags that
are being pushed. The model is a "central repository" type setup,
where users are given access to push to specific branches within
the shared central repository. In this particular installation we
run a specially patched git-receive-pack in setuid mode via SSH,
allowing all writes into the repository as the repository owner,
but only if this hook blesses it.
One of the major checks we perform with this hook is that the
'committer' line of a commit, or the 'tagger' line of a new annotated
tag actually correlates to the UNIX user who is performing the push.
Users can falsify these lines on their local repositories, but
the central repository that management trusts will reject all such
forgery attempts. Of course 'author' lines are still allowed to
be any value, as sometimes changes do come from other individuals.
Another nice feature of this hook is the access control lists for
all repositories on the system can also be stored and tracked in
a supporting Git repository, which can also be access controlled
by itself. This allows full auditing of who-had-what-when-and-why,
thanks to git-blame's data mining capabilities.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Fix lseek(2) calls with args 2 and 3 swapped
Honor -p<n> when applying git diffs
Fix dependency of common-cmds.h
Fix renaming branch without config file
DESTDIR support for git/contrib/emacs
gitweb: Fix bug in "blobdiff" view for split (e.g. file to symlink) patches
Document --left-right option to rev-list.
Revert "builtin-archive: use RUN_SETUP"
rename contrib/hooks/post-receieve-email to contrib/hooks/post-receive-email.
rerere: make sorting really stable.
Fix t4200-rerere for white-space from "wc -l"
I thought it would be cool to have different set of colors for each
git-blame-mode. Function `git-blame-new-commit' does this for us
picking when possible, a random colors based on the set we build on
startup. When it fails, `git-blame-ancient-color' will be used. We
also take care not to use the same color more than once (thank you
David Kågedal, really).
* Prevent (future possible) namespace clash by renaming `color-scale'
into `git-blame-color-scale'. Definition has been changed to be more
in the "lisp" way (thanks for help to #emacs). Also added a small
description of what it does.
* Added docstrings at some point and instructed defvar when a variable
was candidate to customisation by users.
* Added missing defvar to silent byte-compilers (git-blame-file,
git-blame-current)
* Do not require 'cl at startup
* Added more informations on compatibility
Signed-off-by: Xavier Maillard <zedek@gnu.org>
Acked-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-blame-mode has been splitted into git-blame-mode-on and
git-blame-mode-off; it now conditionnaly calls one of them depending
of how we call it. Code is now easier to maintain and to understand.
Fixed `git-reblame' function: interactive form was at the wrong
place.
String displayed on the mode line is now configurable through
`git-blame-mode-line-string` (default to " blame").
Signed-off-by: Xavier Maillard <zedek@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a simple script to create a working directory that uses symlinks
to point at an exisiting repository. This allows having different
branches in different working directories but all from the same
repository.
Based on a description from Junio of how he creates multiple working
directories[1]. With the following caveat:
"This risks confusion for an uninitiated if you update a ref that
is checked out in another working tree, but modulo that caveat
it works reasonably well."
[1] http://article.gmane.org/gmane.comp.version-control.git/41513/
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The update hook is no longer the correct place to generate emails; there
is now the hooks/post-receive script which is run automatically after a
ref has been updated.
This patch is to make use of that new location, and to address some
faults in the old update hook.
The primary problem in the conversion was that in the update hook, the
ref has not actually been changed, but is about to be. In the
post-receive hook the ref has already been updated. That meant that
where we previously had lines like:
git rev-list --not --all
would now give the wrong list because "--all" in the post-receive hook
includes the ref that we are making the email for. This made it more
difficult to show only the new revisions added by this update.
The solution is not pretty; however it does work and doesn't need any
changes to git-rev-list itself. It also fixes (more accurately: reduces
the likelihood of) a nasty race when another update occurs while this
script is running. The solution, in short, looks like this (see the
source code for a longer explanation)
git rev-parse --not --all | grep -v $(git rev-parse $refname) |
git rev-list --pretty --stdin $oldrev..$newrev
This uses git-rev-parse followed by grep to filter out the revision of
the ref in question before it gets to rev-list and inhibits the output
of itself. By using $(git rev-parse $revname) rather than $newrev as the
filter, it also takes care of the situation where another update to the
same ref has been made since $refname was $newrev.
The second problem that is addressed is that of tags inhibiting the
correct output of an update email. Consider this, with somebranch and
sometag pointing at the same revision:
git push origin somebranch
git push origin sometag
That would work fine; the push of the branch would generate an email
containing all the new commits introduced by the update, then the push
of the tag would generate the shortlog formatted tag email. Now
consider:
git push origin sometag
git push origin somebranch
When some branch comes to run its "--not --all" line, it will find
sometag, and filter those commits from the email - leaving nothing.
That meant that those commits would not show (in full) on any email.
The fix is to not use "--all", and instead use "--branches" in the
git-rev-parse command.
Other changes
* Lose the monstrous one-giant-script layout and put things in easy to
digest functions. This makes it much easier to find the place you
need to change if you wanted to customise the output. I've also
tried to write more verbose comments for the same reason. The hook
script is big, mainly because of all the different cases that it has
to handle, so being easy to navigate is important.
* All uses of "git-command" changed to "git command", to cope better
if a user decided not to install all the hard links to git;
* Cleaned up some of the English in the email
* The fact that the receive hook makes the ref available also allows me
to use Shawn Pearce's fantastic suggestion that an annotated tag can
be parsed with git-for-each-ref. This removes the potentially
non-portable use of "<<<" heredocs and the nasty messing around with
"date" to convert numbers of seconds UTC to a real date
* Deletions are now caught and notified (briefly)
* To help with debugging, I've retained the command line mode from the
update hook; but made it so that the output is not emailed, it's just
printed to the screen. This could then be redirected if the user
wanted
* Removed the "Hello" from the beginning of the email - it's just
noise, and no one seriously has their day made happier by "friendly"
programs
* The fact that it doesn't rely on repository state as an indicator any
more means that it's far more stable in its output; hopefully the
same arguments will always generate the same email - even if the
repository changes in the future. This means you can easily recreate
an email should you want to.
* Included Jim Meyering's envelope sender option for the sendmail call
* The hook is now so big that it was inappropriate to copy it
to every repository by keeping it in the templates directory.
Instead, I've put a comment saying to look in contrib/hooks, and
given an example of calling the script from that template hook. The
advantage of calling the script residing at some fixed location is
that if a future package of git included a bug fixed version of the
script, that would be picked up automatically, and the user would not
have to notice and manually copy the new hook to every repository
that uses it.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use git-log --pretty=oneline to print a short description of the
current HEAD (and merge heads if any) in the buffer header.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Han-Wen Nienhuys
Shawn O. Pearce
Simon Hausmann
Simon Hausmann
Marius Storm-Olsen
Jonas Fonseca
Junio C Hamano
Johannes Schindelin
Simon Hausmann
Andy Parkins
Uwe Kleine-König
Josh Triplett
Aneesh Kumar K.V
Alexandre Julliard
Ville Skyttä
Gerrit Pape
Xavier Maillard
Julian Phillips