Add a -z option to be used in conjunction with --porcelain that gives
NUL-terminated output. As 'worktree list --porcelain' does not quote
worktree paths this enables it to handle worktree paths that contain
newlines.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The order in which the stdout and stderr streams are flushed is not
guaranteed to be the same across platforms or `libc` implementations.
This lack of determinism can lead to anomalous and potentially confusing
output if normal (stdout) output is flushed after error (stderr) output.
For instance, the following output which clearly indicates a failure due
to a fatal error:
% git worktree add ../foo bar
Preparing worktree (checking out 'bar')
fatal: 'bar' is already checked out at '.../wherever'
has been reported[1] on Microsoft Windows to appear as:
% git worktree add ../foo bar
fatal: 'bar' is already checked out at '.../wherever'
Preparing worktree (checking out 'bar')
which may confuse the reader into thinking that the command somehow
recovered and ran to completion despite the error.
This problem crops up because the "chatty" status message "Preparing
worktree" is sent to stdout, whereas the "fatal" error message is sent
to stderr. One way to fix this would be to flush stdout manually before
git-worktree reports any errors to stderr.
However, common practice in Git is for "chatty" messages to be sent to
stderr. Therefore, a more appropriate fix is to adjust git-worktree to
conform to that practice by sending its "chatty" messages to stderr
rather than stdout as is currently the case.
There may be concern that relocating messages from stdout to stderr
could break existing tooling, however, these messages are already
internationalized, thus are unstable. And, indeed, the "Preparing
worktree" message has already been the subject of somewhat significant
changes in 2c27002a0a (worktree: improve message when creating a new
worktree, 2018-04-24). Moreover, there is existing precedent, such as
68b939b2f0 (clone: send diagnostic messages to stderr, 2013-09-18) which
likewise relocated "chatty" messages from stdout to stderr for
git-clone.
[1]: https://lore.kernel.org/git/CA+34VNLj6VB1kCkA=MfM7TZR+6HgqNi5-UaziAoCXacSVkch4A@mail.gmail.com/T/
Reported-by: Baruch Burstein <bmburstein@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a follow-up to d162b25f95 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp
via a simple s/test_i18ncmp/test_cmp/g search-replacement.
I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight
changes between "master" and "seen", as well as the prerequisite
itself due to other changes between "master" and "next/seen" which add
new test_i18ncmp uses.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree list" annotates each worktree according to its state such
as "prunable" or "locked", however it is not immediately obvious why
these worktrees are being annotated. For prunable worktrees a reason
is available that is returned by should_prune_worktree() and for locked
worktrees a reason might be available provided by the user via `lock`
command.
Let's teach "git worktree list" a --verbose mode that outputs the reason
why the worktrees are being annotated. The reason is a text that can take
virtually any size and appending the text on the default columned format
will make it difficult to extend the command with other annotations and
not fit nicely on the screen. In order to address this shortcoming the
annotation is then moved to the next line indented followed by the reason
If the reason is not available the annotation stays on the same line as
the worktree itself.
The output of "git worktree list" with verbose becomes like so:
$ git worktree list --verbose
...
/path/to/locked-no-reason acb124 [branch-a] locked
/path/to/locked-with-reason acc125 [branch-b]
locked: worktree with a locked reason
/path/to/prunable-reason ace127 [branch-d]
prunable: gitdir file points to non-existent location
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git worktree list" command shows the absolute path to the worktree,
the commit that is checked out, the name of the branch, and a "locked"
annotation if the worktree is locked, however, it does not indicate
whether the worktree is prunable.
The "prune" command will remove a worktree if it is prunable unless
`--dry-run` option is specified. This could lead to a worktree being
removed without the user realizing before it is too late, in case the
user forgets to pass --dry-run for instance. If the "list" command shows
which worktree is prunable, the user could verify before running
"git worktree prune" and hopefully prevents the working tree to be
removed "accidentally" on the worse case scenario.
Let's teach "git worktree list" to show when a worktree is a prunable
candidate for both default and porcelain format.
In the default format a "prunable" text is appended:
$ git worktree list
/path/to/main aba123 [main]
/path/to/linked 123abc [branch-a]
/path/to/prunable ace127 (detached HEAD) prunable
In the --porcelain format a prunable label is added followed by
its reason:
$ git worktree list --porcelain
...
worktree /path/to/prunable
HEAD abc1234abc1234abc1234abc1234abc1234abc12
detached
prunable gitdir file points to non-existent location
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c57b3367be (worktree: teach `list` to annotate locked worktree,
2020-10-11) taught "git worktree list" to annotate locked worktrees by
appending "locked" text to its output, however, this is not listed in
the --porcelain format.
Teach "list --porcelain" to do the same and add a "locked" attribute
followed by its reason, thus making both default and porcelain format
consistent. If the locked reason is not available then only "locked"
is shown.
The output of the "git worktree list --porcelain" becomes like so:
$ git worktree list --porcelain
...
worktree /path/to/locked
HEAD 123abcdea123abcd123acbd123acbda123abcd12
detached
locked
worktree /path/to/locked-with-reason
HEAD abc123abc123abc123abc123abc123abc123abc1
detached
locked reason why it is locked
...
In porcelain mode, if the lock reason contains special characters
such as newlines, they are escaped with backslashes and the entire
reason is enclosed in double quotes. For example:
$ git worktree list --porcelain
...
locked "worktree's path mounted in\nremovable device"
...
Furthermore, let's update the documentation to state that some
attributes in the porcelain format might be listed alone or together
with its value depending whether the value is available or not. Thus
documenting the case of the new "locked" attribute.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c57b3367be (worktree: teach `list` to annotate locked worktree,
2020-10-11) introduced a new test to ensure locked worktrees are listed
with "locked" annotation. However, the test does not clean up after
itself as "git worktree prune" is not going to remove the locked worktree
in the first place. This not only leaves the test in an unclean state it
also potentially breaks following tests that rely on the
"git worktree list" output.
Let's fix that by unlocking the worktree before the "prune" command.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carefully excluding t2106, which sees independent development elsewhere
at the time of writing, we transition above-mentioned tests to the
default branch name `main`. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t2*.sh &&
git checkout HEAD -- t2106\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In c57b3367be (worktree: teach `list` to annotate locked worktree,
2020-10-11), we introduced a test case that wanted to talk about
"worktrees" but talked about "worktress" instead. Let's fix that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git worktree list" shows the absolute path to the working tree,
the commit that is checked out and the name of the branch. It is not
immediately obvious which of the worktrees, if any, are locked.
"git worktree remove" refuses to remove a locked worktree with
an error message. If "git worktree list" told which worktrees
are locked in its output, the user would not even attempt to
remove such a worktree, or would realize that
"git worktree remove -f -f <path>" is required.
Teach "git worktree list" to append "locked" to its output.
The output from the command becomes like so:
$ git worktree list
/path/to/main abc123 [master]
/path/to/worktree 456def (detached HEAD)
/path/to/locked-worktree 123abc (detached HEAD) locked
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing spaces before '&&' and switch tabs around '&&' to spaces.
Also fix the space after redirection operator in t3701 while we're here.
These issues were found using `git grep '[^ ]&&$'` and
`git grep -P '&&\t' t/`.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bug which reports an extra `/.git/.` in worktree path when called in
'.git' directory already has been fixed. But unfortunately, the regression
test to ensure this behavior has been forgotten.
Here is that test.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Acked-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git worktree' command used to be just another mode in 'git
checkout', namely 'git checkout --to'. When the tests for the latter
were retrofitted for the former, the test name was adjusted, but the
test number was kept, even though the test is testing a different
command now. t/README states: "Second digit tells the particular
command we are testing.", so 'git worktree' should have a separate
number just for itself.
Move the worktree tests to t24* to adhere to that guideline. We're
going to make use of the free'd up numbers in a subsequent commit.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip Wood
Eric Sunshine
Han-Wen Nienhuys
Ævar Arnfjörð Bjarmason
Junio C Hamano
Rafael Silva
Johannes Schindelin
Andrei Rybak
Hariom Verma
Thomas Gummerer