If we manage to clone a remote repository but run into an
error in the checkout, it is probably sane to leave the repo
directory in place. That lets the user examine the situation
without spending time to re-clone from the remote (which may
be a lengthy process).
Rather than try to convert each die() from the checkout code
path into an error(), we simply set a flag that tells the
"remove_junk" atexit function to print a helpful message and
leave the repo in place.
Note that the test added in this patch actually passes
without the code change. The reason is that the cleanup code
is buggy; we chdir into the working tree for the checkout,
but still may use relative paths to remove the directories
(which means if you cloned into "foo", we would accidentally
remove "foo" from the working tree!). There's no point in
fixing it now, since this patch means we will never try to
remove anything after the chdir, anyway.
[jc: replaced the message with a more succinct version from
Jonathan]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fetch from a remote, we do a revision walk to make
sure that what we received is connected to our existing
history. We do not do the same check for clone, which should
be able to check that we received an intact history graph.
The upside of this patch is that it will make clone more
resilient against propagating repository corruption. The
downside is that we will now traverse "rev-list --objects
--all" down to the roots, which may take some time (it is
especially noticeable for a "--local --bare" clone).
Note that we need to adjust t5710, which tries to make such
a bogus clone. Rather than checking after the fact that our
clone is bogus, we can simplify it to just make sure "git
clone" reports failure.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When clone is populating the working tree, it ignores the
return status from unpack_trees; this means we may report a
successful clone, even when the checkout fails.
When checkout fails, we may want to leave the $GIT_DIR in
place, as it might be possible to recover the data through
further use of "git checkout" (e.g., if the checkout failed
due to a transient error, disk full, etc). However, we
already die on a number of other checkout-related errors, so
this patch follows that pattern.
In addition to marking a now-passing test, we need to adjust
t5710, which blindly assumed it could make bogus clones of
very deep alternates hierarchies. By using "--bare", we can
avoid it actually touching any objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We stopped paying attention to $GIT_CONFIG environment that points
at a single configuration file from any command other than "git config"
quite a while ago, but "git clone" internally set, exported, and
then unexported the variable during its operation unnecessarily.
* jc/no-git-config-in-clone:
clone: do not export and unexport GIT_CONFIG
Earlier, dc87183 (use GIT_CONFIG only in "git config", not other
programs, 2008-06-30) made sure that the environment variable is
never used outside "git config", but "git clone", after creating a
directory for the new repository and until the init_db() function
populates its .git/ directory, exported the variable for no good
reason. No hook will run from init_db() and more importantly no
hook can run until init_db() finishes creation of the new
repository, so it cannot be used by any invocation of "git config"
by definition.
Stop doing the useless export/unexport.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --separate-git-dir option was introduced to make it simple to put
the git directory somewhere outside the worktree, for example when
cloning a repository for use as a submodule.
It was not intended for use when creating a bare repository. In that
case there is no worktree and it is more natural to directly clone the
repository and create a .git file as separate steps:
git clone --bare /path/to/repo.git bar.git
printf 'gitdir: bar.git\n' >foo.git
Forbid the combination, making the command easier to explain.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git clone --separate-git-dir" is interrupted, we failed to
remove the real location we created the repository.
* jl/interrupt-clone-remove-separate-git-dir:
clone: support atomic operation with --separate-git-dir
Since b57fb80a7d (init, clone: support --separate-git-dir for .git file)
git clone supports the --separate-git-dir option to create the git dir
outside the work tree. But when that option is used, the git dir won't be
deleted in case the clone fails like it would be without this option. This
makes clone lose its atomicity as in case of a failure a partly set up git
dir is left behind. A real world example where this leads to problems is
when "git submodule update" fails to clone a submodule and later calls to
"git submodule update" stumble over the partially set up git dir and try
to revive the submodule from there, which then fails with a not very user
friendly error message.
Fix that by updating the junk_git_dir variable (used to remember if and
what git dir should be removed in case of failure) to the new value given
with the --seperate-git-dir option. Also add a test for this to t5600 (and
while at it fix the former last test to not cd into a directory to test
for its existence but use "test -d" instead).
Reported-by: Manlio Perillo <manlio.perillo@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A repository created with "git clone --single" had its fetch
refspecs set up just like a clone without "--single", leading the
subsequent "git fetch" to slurp all the other branches, defeating
the whole point of specifying "only this branch".
* rt/maint-clone-single:
clone --single: limit the fetch refspec to fetched branch
Running "git fetch" in a repository made with "git clone --single"
slurps all the branches, defeating the point of "--single".
* rt/maint-clone-single:
clone --single: limit the fetch refspec to fetched branch
After running "git clone --single", the resulting repository has the
usual default "+refs/heads/*:refs/remotes/origin/*" wildcard fetch
refspec installed, which means that a subsequent "git fetch" will
end up grabbing all the other branches.
Update the fetch refspec to cover only the singly cloned ref instead
to correct this.
That means:
If "--single" is used without "--branch" or "--mirror", the
fetch refspec covers the branch on which remote's HEAD points to.
If "--single" is used with "--branch", it'll cover only the branch
specified in the "--branch" option.
If "--single" is combined with "--mirror", then it'll cover all
refs of the cloned repository.
If "--single" is used with "--branch" that specifies a tag, then
it'll cover only the ref for this tag.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rj/path-cleanup:
Call mkpathdup() rather than xstrdup(mkpath(...))
Call git_pathdup() rather than xstrdup(git_path("..."))
path.c: Use vsnpath() in the implementation of git_path()
path.c: Don't discard the return value of vsnpath()
path.c: Remove the 'git_' prefix from a file scope function
In addition to updating the xstrdup(mkpath(...)) call sites with
mkpathdup(), we also fix a memory leak (in merge_3way()) caused by
neglecting to free the memory allocated to the 'base_name' variable.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A handful of files and directories we create had tighter than
necessary permission bits when the user wanted to have group
writability (e.g. by setting "umask 002").
* ar/clone-honor-umask-at-top:
add: create ADD_EDIT.patch with mode 0666
rerere: make rr-cache fanout directory honor umask
Restore umasks influence on the permissions of work tree created by clone
A handful of files and directories we create had tighter than
necessary permission bits when the user wanted to have group
writability (e.g. by setting "umask 002").
* ar/clone-honor-umask-at-top:
add: create ADD_EDIT.patch with mode 0666
rerere: make rr-cache fanout directory honor umask
Restore umasks influence on the permissions of work tree created by clone
The original version of the git-clone just used mkdir(1) to create
the working directories. The version rewritten in C creates all
directories inside the working tree by using the mode argument of
0777 when calling mkdir(2) to let the umask take effect.
But the top-level directory of the working tree is created by
passing the mode argument of 0755 to mkdir(2), which results in an
overly tight restriction if the user wants to make directories group
writable with a looser umask like 002.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --single-branch" to clone a single branch did not limit
the cloning to the specified branch.
* nd/clone-single-fix:
clone: fix ref selection in --single-branch --branch=xxx
- do not fetch HEAD
- do not also fetch refs following "xxx"
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is basically the same as using "file://", but is a
little less subtle for the end user. It also allows relative
paths to be specified.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 5bd631b3 ("clone: support multiple levels of verbosity"), the
default behavior to show progress of the implicit checkout in
the clone-command regressed so that progress was only shown if
the verbose-option was specified.
Fix this by making option_verbosity == 0 output progress as well.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, progress output is disabled if stderr is not a terminal.
The --progress option can be used to force progress output anyways.
Conversely, --no-progress does not force progress output. In particular,
if stderr is a terminal, progress output is enabled.
This is unintuitive. Change --no-progress to force output off.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alternate references are directly (and now, correctly) handled by
fetch-pack, so there is no need to inform fetch-pack about them via
the extra_refs back channel.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bahavior of a bunch of code before the "if (refs)" statement also
depends on whether refs is set, so make the logic clearer by shifting
this code into the if statement.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you specify a local repository on the command line of
clone, ls-remote, upload-pack, receive-pack, or upload-archive,
or in a request to git-daemon, we perform a little bit of
lookup magic, doing things like looking in working trees for
.git directories and appending ".git" for bare repos.
For clone, this magic happens in get_repo_path. For
everything else, it happens in enter_repo. In both cases,
there are some ambiguous or confusing cases that aren't
handled well, and there is one case that is not handled the
same by both methods.
This patch tries to provide (and test!) standard, sensible
lookup rules for both code paths. The intended changes are:
1. When looking up "foo", we have always preferred
a working tree "foo" (containing "foo/.git" over the
bare "foo.git". But we did not prefer a bare "foo" over
"foo.git". With this patch, we do so.
2. We would select directories that existed but didn't
actually look like git repositories. With this patch,
we make sure a selected directory looks like a git
repo. Not only is this more sensible in general, but it
will help anybody who is negatively affected by change
(1) negatively (e.g., if they had "foo.git" next to its
separate work tree "foo", and expect to keep finding
"foo.git" when they reference "foo").
3. The enter_repo code path would, given "foo", look for
"foo.git/.git" (i.e., do the ".git" append magic even
for a repo with working tree). The clone code path did
not; with this patch, they now behave the same.
In the unlikely case of a working tree overlaying a bare
repo (i.e., a ".git" directory _inside_ a bare repo), we
continue to treat it as a working tree (prefering the
"inner" .git over the bare repo). This is mainly because the
combination seems nonsensical, and I'd rather stick with
existing behavior on the off chance that somebody is relying
on it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/clone-detached:
clone: fix up delay cloning conditions
push: do not let configured foreign-vcs permanently clobbered
clone: print advice on checking out detached HEAD
clone: allow --branch to take a tag
clone: refuse to clone if --branch points to bogus ref
clone: --branch=<branch> always means refs/heads/<branch>
clone: delay cloning until after remote HEAD checking
clone: factor out remote ref writing
clone: factor out HEAD update code
clone: factor out checkout code
clone: write detached HEAD in bare repositories
t5601: add missing && cascade
* mh/ref-clone-without-extra-refs:
write_remote_refs(): create packed (rather than extra) refs
add_packed_ref(): new function in the refs API.
ref_array: keep track of whether references are sorted
pack_refs(): remove redundant check
6f48d39 (clone: delay cloning until after remote HEAD checking -
2012-01-16) allows us to perform some checks on remote refs before the
actual cloning happens. But not all transport types support
this. Remote helper with "import" capability will not return complete
ref information until fetch is performed and therefore the clone cannot
be delayed.
foreign_vcs field in struct remote was used to detect this kind of transport
and save the result. This is a mistake because foreign_vcs is designed
to override url-based transport detection. As a result, if the same
"struct transport *" object is used on many different urls and one of
them attached remote transport, the following urls will be mistakenly
attached to the same transport. This fault is worked around by dad0b3d
(push: do not let configured foreign-vcs permanently clobbered -
2012-01-23)
To fix this, detect incomplete refs from transport_get_remote_refs()
by SHA-1. Incomplete ones must have null SHA-1 (*). Then revert
changes related to foreign_cvs field in 6f48d39 and dad0b3d.
A good thing from this change is that cloning smart http transport can
also be delayed. Earlier it falls into the same category "remote
transport, no delay".
(*) Theoretically if one of the remote refs happens to have null SHA-1,
it will trigger false alarm and the clone will not be delayed. But
that chance may be too small for us to pay attention to.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_remote_refs() creates new packed refs from references obtained
from the remote repository, which is "out of thin air" as far as the
local repository is concerned. Previously it did this by creating
"extra" refs, then calling pack_refs() to bake them into the
packed-refs file. Instead, create packed refs (in the packed
reference cache) directly, then call pack_refs().
Aside from being more logical, this is another step towards removing
extra refs entirely.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because a tag ref cannot be put to HEAD, HEAD will become detached.
This is consistent with "git checkout <tag>".
This is mostly useful in shallow clone, where it allows you to clone a
tag in addtion to branches.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's possible that users make a typo in the branch name. Stop and let
users recheck. Falling back to remote's HEAD is not documented any
way.
Except when using remote helper, the pack has not been transferred at
this stage yet so we don't waste much bandwidth.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not make sense to look outside refs/heads for HEAD's target
(src_ref_prefix can be set to "refs/" if --mirror is used) because ref
code only allows symref in form refs/heads/...
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This gives us an opportunity to abort the command during remote HEAD
check without wasting much bandwidth.
Cloning with remote-helper remains before the check because the remote
helper updates mapped_refs, which is necessary for remote ref checks.
foreign_vcs field is used to indicate the transport is handled by
remote helper.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at it, update the comment at "if (remote_head)"
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Read HEAD from disk instead of relying on local variable
our_head_points_at, so that if earlier code fails to make HEAD
properly, it'll be detected.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we don't write, HEAD is still at refs/heads/master as initialized
by init-db, which may or may not match remote's HEAD.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --single-branch is given, only one branch, either HEAD or one
specified by --branch, will be fetched. Also only tags that point to
the downloaded history are fetched.
This helps most in shallow clones, where it can reduce the download to
minimum and that is why it is enabled by default when --depth is given.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is to give an alternate <name> instead of "origin" to the remote
we are cloning from.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch,
$ git clone foo .
results in this:
Cloning into ....
done.
With it:
Cloning into '.'...
done.
Signed-off-by: Richard Hartmann <richih.mailinglist@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King
Junio C Hamano
Nguyễn Thái Ngọc Duy
Jens Lehmann
Ralf Thielow
Ramsay Jones
Alex Riesen
Erik Faye-Lund
Clemens Buchacher
Michael Haggerty
Carlos Martín Nieto
Richard Hartmann