This change configuration variables that where in italic style
to monospace font according to the guideline. It was obtained with
grep '[[:alpha:]]*\.[[:alpha:]]*::$' config.txt | \
sed -e 's/::$//' -e 's/\./\\\\./' | \
xargs -iP perl -pi -e "s/\'P\'/\`P\`/g" ./*.txt
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also document another limitation coming from a bug in handling the
basename match with a directory for 're-inclusion'.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is a pattern "!foo/bar", this patch makes it not exclude
"foo" right away. This gives us a chance to examine "foo" and
re-include "foo/bar".
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Micha Wiedenmann <mw-u2@gmx.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ignore mechanism saw a few regressions around untracked file
listing and sparse checkout selection areas in 2.7.0; the change
that is responsible for the regression has been reverted.
* nd/exclusion-regression-fix:
Revert "dir.c: don't exclude whole dir prematurely if neg pattern may match"
This reverts commit 57534ee77d. The
feature added in that commit requires that patterns behave the same way
from anywhere. But some patterns can behave differently depending on
current "working" directory. The conditions to catch and avoid these
patterns are too loose. The untracked listing[1] and sparse-checkout
selection[2] can become incorrect as a result.
[1] http://article.gmane.org/gmane.comp.version-control.git/283520
[2] http://article.gmane.org/gmane.comp.version-control.git/283532
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow a later "!/abc/def" to override an earlier "/abc" that
appears in the same .gitignore file to make it easier to express
"everything in /abc directory is ignored, except for ...".
* nd/ignore-then-not-ignore:
dir.c: don't exclude whole dir prematurely if neg pattern may match
dir.c: make last_exclude_matching_from_list() run til the end
If there is a pattern "!foo/bar", this patch makes it not exclude "foo"
right away. This gives us a chance to examine "foo" and re-include
"foo/bar".
In order for it to detect that the directory under examination should
not be excluded right away, in other words it is a parent directory of a
negative pattern, the "directory path" of the negative pattern must be
literal. Patterns like "!f?o/bar" can't stop "foo" from being excluded.
Basename matching (i.e. "no slashes in the pattern") or must-be-dir
matching (i.e. "trailing slash in the pattern") does not work well with
this. For example, if we descend in "foo" and are examining "foo/abc",
current code for "foo/" pattern will check if path "foo/abc", not "foo",
is a directory. The same problem with basename matching. These may need
big code reorg to make it work.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should improve readability. Compare "thislongname" and
"thisLongName". The following keys are left in unchanged. We can
decide what to do with them later.
- am.keepcr
- core.autocrlf .safecrlf .trustctime
- diff.dirstat .noprefix
- gitcvs.usecrlfattr
- gui.blamehistoryctx .trustmtime
- pull.twohead
- receive.autogc
- sendemail.signedoffbycc .smtpsslcertpath .suppresscc
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes long-standing misunderstanding of what assume-unchanged is
about. Some text near what is removed by the bottom patch may also
have to be removed.
* po/doc-assume-unchanged:
gitignore.txt: do not suggest assume-unchanged
doc: make clear --assume-unchanged's user contract
git-update-index --assume-unchanged was never meant to ignore changes
to tracked files (only to spare some stats). So do not suggest it
as a means to achieve that.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Trailing whitespaces in .gitignore files, unless they are quoted for
fnmatch(3), e.g. "path\ ", are warned and ignored.
Strictly speaking, this is a backward incompatible change, but very
unlikely to bite any sane user and adjusting should be obvious and
easy.
* nd/gitignore-trailing-whitespace:
t0008: skip trailing space test on Windows
dir: ignore trailing spaces in exclude patterns
dir: warn about trailing spaces in exclude patterns
Explicitly list $HOME/.config/git/ignore as one of the places you
can use to keep ignore patterns that depend on your personal choice
of tools, e.g. *~ for Emacs users.
* jn/ignore-doc:
gitignore doc: add global gitignore to synopsis
The gitignore(5) manpage already documents $XDG_CONFIG_HOME/git/ignore
but it is easy to forget that it exists. Add a reminder to the
synopsis.
Noticed while looking for a place to put a list of scratch filenames
in the cwd used by one's editor of choice.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Additionally, precedence of negated patterns is exactly as outlined in
the DESCRIPTION section, we don't need to repeat this.
Signed-off-by: Karsten Blees <blees@dcon.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update documentation to change "GIT" which was a poor-man's small
caps to "Git". The latter was the intended spelling.
Also change "git" spelled in all-lowercase to "Git" when it refers
to the system as the whole or the concept it embodies, as opposed to
the command the end users would type.
* ta/doc-no-small-caps:
Documentation: StGit is the right spelling, not StGIT
Documentation: describe the "repository" in repository-layout
Documentation: add a description for 'gitfile' to glossary
Documentation: do not use undefined terms git-dir and git-file
Documentation: the name of the system is 'Git', not 'git'
Documentation: avoid poor-man's small caps GIT
Add a new command "git check-ignore" for debugging .gitignore
files.
The variable names may want to get cleaned up but that can be done
in-tree.
* as/check-ignore:
clean.c, ls-files.c: respect encapsulation of exclude_list_groups
t0008: avoid brace expansion
add git-check-ignore sub-command
setup.c: document get_pathspec()
add.c: extract new die_if_path_beyond_symlink() for reuse
add.c: extract check_path_for_gitlink() from treat_gitlinks() for reuse
pathspec.c: rename newly public functions for clarity
add.c: move pathspec matchers into new pathspec.c for reuse
add.c: remove unused argument from validate_pathspec()
dir.c: improve docs for match_pathspec() and match_pathspec_depth()
dir.c: provide clear_directory() for reclaiming dir_struct memory
dir.c: keep track of where patterns came from
dir.c: use a single struct exclude_list per source of excludes
Conflicts:
builtin/ls-files.c
dir.c
Allows pathname patterns in .gitignore and .gitattributes files
with double-asterisks "foo/**/bar" to match any number of directory
hierarchies.
* nd/wildmatch:
wildmatch: replace variable 'special' with better named ones
compat/fnmatch: respect NO_FNMATCH* even on glibc
wildmatch: fix "**" special case
t3070: Disable some failing fnmatch tests
test-wildmatch: avoid Windows path mangling
Support "**" wildcard in .gitignore and .gitattributes
wildmatch: make /**/ match zero or more directories
wildmatch: adjust "**" behavior
wildmatch: fix case-insensitive matching
wildmatch: remove static variable force_lower_case
wildmatch: make wildmatch's return value compatible with fnmatch
t3070: disable unreliable fnmatch tests
Integrate wildmatch to git
wildmatch: follow Git's coding convention
wildmatch: remove unnecessary functions
Import wildmatch from rsync
ctype: support iscntrl, ispunct, isxdigit and isprint
ctype: make sane_ctype[] const array
Conflicts:
Makefile
We support backslash escape, but we hide the details behind the phrase
"a shell glob suitable for consumption by fnmatch(3)". So it may not
be obvious how one can get literal # or ! at the beginning of pattern.
Add a few lines on how to work around the magic characters.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use separate bulleted paragraphs for the three different gitignore
pattern sources.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To use the feature of core.excludesfile, the user needs:
1. to create such a file,
2. and add configuration variable to point at it.
Instead, we can make this a one-step process by choosing a default value
which points to a filename in the user's $HOME, that is unlikely to
already exist on the system, and only use the presence of the file as a
cue that the user wants to use that feature.
And we use "${XDG_CONFIG_HOME:-$HOME/.config/git}/ignore" as such a
file, in the same directory as the newly added configuration file
("${XDG_CONFIG_HOME:-$HOME/.config/git}/config). The use of this
directory is in line with XDG specification as a location to store
such application specific files.
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
A frequently asked question on #git is how to stop tracking a file
that is mistakenly tracked by git. A frequently attempted strategy is
to add such files to .gitignore.
Thus one might imagine that the gitignore documentation could be a
good entry point for 'git rm' documentation. Add some
cross-references in this vein.
While at it, move a reference to update-index --assume-unchanged from
the DESCRIPTION to lower down on the page. This way, the methodical
reader can benefit from first learning what excludes files do, then
how they relate to other git facilities.
Based-on-patch-by: Sitaram Chamarty <sitaram@atc.tcs.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A learner-by-example might want to look at the examples section first.
Help her out by supplying some section headings: PATTERN FORMAT for
the format of lines in an excludes file and EXAMPLES for the two
examples.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An asterisk in "Documentation/*.txt" quoted with \ to avoid bold text
is being output as \* because asciidoc does not consider it a
candidate for escaping (there is no matching * to pair it with).
So the manual looks like it is saying that one should write
"Documentation/\*.txt" in the .gitignore file.
Reported-by: Frédéric Brière <fbriere@fbriere.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patterns containing a / are implicitly anchored to the directory
containing the relevant .gitignore file.
Patterns not containing a / are textual matches against the path
name relative to the directory containing .gitignore.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
Use the term "toplevel of the work tree" in gitattributes.txt and
gitignore.txt to define the limits of the search for those files.
Signed-off-by: Jason Merrill <jason@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch explains more carefully that `.gitignore` concerns only
untracked files and refers the reader to
git update-index --assume-unchanged
in the need of ignoring uncommitted changes in already tracked files.
The description of this option is lifted to a more "porcelainish"
level and explains the caveats of this usecase.
Whether feasible or not, I believe adding this functionality to
the porcelain is out of the scope of this patch. (And I personally
think that referring to the plumbing in the case of such a special
usage is fine.)
This is currently probably one of the top FAQs at #git and the
--assume-unchanged switch is not widely known; gitignore(5) is the first
place where people are likely to look for it.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes for 1.5.4.5
Documentation: clarify use of .git{ignore,attributes} versus .git/info/*
t/t3800-mktag.sh: use test_must_fail rather than '!'
Conflicts:
t/t3800-mktag.sh
gitignore patterns can be read from three different
files, while gitattributes can come from two files. Let's
provide some hints to the user about the differences and how
they are typically used.
Suggested by Toby Corkindale, but gratuitously reworded by Jeff King.
Signed-off-by: Toby Corkindale <toby.corkindale@rea-group.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A pattern "foo/" in the exclude list did not match directory
"foo", but a pattern "foo" did. This attempts to extend the
exclude mechanism so that it would while not matching a regular
file or a symbolic link "foo". In order to differentiate a
directory and non directory, this passes down the type of path
being checked to excluded() function.
A downside is that the recursive directory walk may need to run
lstat(2) more often on systems whose "struct dirent" do not give
the type of the entry; earlier it did not have to do so for an
excluded path, but we now need to figure out if a path is a
directory before deciding to exclude it. This is especially bad
because an idea similar to the earlier CE_UPTODATE optimization
to reduce number of lstat(2) calls would by definition not apply
to the codepaths involved, as (1) directories will not be
registered in the index, and (2) excluded paths will not be in
the index anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only git-ls-files(1) describes the gitignore format in detail, and it does so
with reference to git-ls-files options. Most users don't use the plumbing
command git-ls-files directly, and shouldn't have to look in its manpage for
information on the gitignore format.
Create a new manpage gitignore(5) (Documentation/gitignore.txt), and factor
out the gitignore documentation into that file, changing it to refer to
.gitignore and $GIT_DIR/info/exclude as used by porcelain commands. Reference
gitignore(5) from other relevant manpages and documentation. Remove
now-redundant information on exclude patterns from git-ls-files(1), leaving
only information on how git-ls-files options specify exclude patterns and what
precedence they have.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Tom Russello
Junio C Hamano
Nguyễn Thái Ngọc Duy
Michael J Gruber
Ben North
Jonathan Nieder
Karsten Blees
Thomas Ackermann
Adam Spiers
Philip Oakley
Huynh Khoi Nguyen Nguyen
Jeff King
Thomas Rast
Jason Merrill
Petr Baudis
Jonathan Nieder
Christian Couder
Dan McGee
Shawn Bohrer
David Kastrup
Josh Triplett