Граф коммитов

14 Коммитов

Автор SHA1 Сообщение Дата
Johannes Schindelin 30183894ea ci: ignore rubygems warning in the "Documentation" job
A recent update in the Linux VM images used by Azure Pipelines surfaced
a new problem in the "Documentation" job. Apparently, this warning
appears 396 times on `stderr` when running `make doc`:

/usr/lib/ruby/vendor_ruby/rubygems/defaults/operating_system.rb:10: warning: constant Gem::ConfigMap is deprecated

This problem was already reported to the `rubygems` project via
https://github.com/rubygems/rubygems/issues/3068.

As there is nothing Git can do about this warning, and as the
"Documentation" job reports this warning as a failure, let's just
silence it and move on.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-10 09:52:27 -08:00
brian m. carlson f6461b82b9 Documentation: fix build with Asciidoctor 2
Our documentation toolchain has traditionally been built around DocBook
4.5.  This version of DocBook is the last DTD-based version of DocBook.
In 2009, DocBook 5 was introduced using namespaces and its syntax is
expressed in RELAX NG, which is more expressive and allows a wider
variety of syntax forms.

Asciidoctor, one of the alternatives for building our documentation,
moved support for DocBook 4.5 out of core in its recent 2.0 release and
now only supports DocBook 5 in the main release.  The DocBoook 4.5
converter is still available as a separate component, but this is not
available in most distro packages.  This would not be a problem but for
the fact that we use xmlto, which is still stuck in the DocBook 4.5 era.

xmlto performs DTD validation as part of the build process.  This is not
problematic for DocBook 4.5, which has a valid DTD, but it clearly
cannot work for DocBook 5, since no DTD can adequately express its full
syntax.  In addition, even if xmlto did support RELAX NG validation,
that wouldn't be sufficient because it uses the libxml2-based xmllint to
do so, which has known problems with validating interleaves in RELAX NG.

Fortunately, there's an easy way forward: ask Asciidoctor to use its
DocBook 5 backend and tell xmlto to skip validation.  Asciidoctor has
supported DocBook 5 since v0.1.4 in 2013 and xmlto has supported
skipping validation for probably longer than that.

We also need to teach xmlto how to use the namespaced DocBook XSLT
stylesheets instead of the non-namespaced ones it usually uses.
Normally these stylesheets are interchangeable, but the non-namespaced
ones have a bug that causes them not to strip whitespace automatically
from certain elements when namespaces are in use.  This results in
additional whitespace at the beginning of list elements, which is
jarring and unsightly.

We can do this by passing a custom stylesheet with the -x option that
simply imports the namespaced stylesheets via a URL.  Any system with
support for XML catalogs will automatically look this URL up and
reference a local copy instead without us having to know where this
local copy is located.  We know that anyone using xmlto will already
have catalogs set up properly since the DocBook 4.5 DTD used during
validation is also looked up via catalogs.  All major Linux
distributions distribute the necessary stylesheets and have built-in
catalog support, and Homebrew does as well, albeit with a requirement to
set an environment variable to enable catalog support.

On the off chance that someone lacks support for catalogs, it is
possible for xmlto (via xmllint) to download the stylesheets from the
URLs in question, although this will likely perform poorly enough to
attract attention.  People still have the option of using the prebuilt
documentation that we ship, so happily this should not be an impediment.

Finally, we need to filter out some messages from other stylesheets that
occur when invoking dblatex in the CI job.  This tool strips namespaces
much like the unnamespaced DocBook stylesheets and prints similar
messages.  If we permit these messages to be printed to standard error,
our documentation CI job will fail because we check standard error for
unexpected output.  Due to dblatex's reliance on Python 2, we may need
to revisit its use in the future, in which case this problem may go
away, but this can be delayed until a future patch.

The final message we filter is due to libxslt on modern Debian and
Ubuntu.  The patch which they use to implement reproducible ID
generation also prints messages about the ID generation.  While this
doesn't affect our current CI images since they use Ubuntu 16.04 which
lacks this patch, if we upgrade to Ubuntu 18.04 or a modern Debian,
these messages will appear and, like the above messages, cause a CI
failure.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-16 12:20:39 -07:00
SZEDER Gábor 37fc8cb15f ci: fix AsciiDoc/Asciidoctor stderr check in the documentation build job
In 'ci/test-documentation.sh' we save the standard error of 'make
doc', and, in an attempt to make sure that neither AsciiDoc nor
Asciidoctor printed any warnings, we check the emptiness of the
resulting file with '! test -s stderr.log'.  This check has never
actually worked, because in our 'ci/*' build scripts we rely on 'set
-e' aborting the build job when a command exits with error, and,
unfortunately, the combination of the two doesn't work as intended.
According to POSIX [1]:

  "The -e setting shall be ignored when executing [...] a pipeline
  beginning with the ! reserved word" [2]

Watch and learn:

  $ echo unexpected >file
  $ ( set -e; ! test -s file ; echo "should not reach this" ) ; echo $?
  should not reach this
  0

This is why we haven't noticed the warnings from Asciidoctor that were
fixed in the first patches of this patch series, though some of them
were already there in the build of v2.18.0-rc0 [3].

Check the emptiness of that file with 'test ! -s' instead, which works
properly with 'set -e':

  $ ( set -e; test ! -s file ; echo "should not reach this" ) ; echo $?
  1

Furthermore, dump the contents of that file to the log for our
convenience, so if it were to unexpectedly end up being non-empty,
then we wouldn't have to scroll through all that long build log
looking for warnings, but could see them right away near the end of
the log.

Note that we are only really interested in the standard error of
AsciiDoc and Asciidoctor, but by saving the stderr of 'make doc' we
also save any error output from the make rules.  Currently there is
only one such line: we build the docs with Asciidoctor right after a
'make clean', meaning that 'make USE_ASCIIDOCTOR=1 doc' always starts
with running 'GIT-VERSION-GEN', which in turn prints the version to
stderr.  A 'sed' command was supposed to remove this version line to
prevent it from triggering that (previously defunct) emptiness check,
but, unfortunately, this command doesn't work as intended, either,
because it leaves the file to be checked intact, but that defunct
emptiness check hid this issue, too...  Furthermore, in the near
future there will be an other line on stderr, because commit
9a71722b4d (Doc: auto-detect changed build flags, 2019-03-17) in the
currently cooking branch 'ma/doc-diff-doc-vs-doctor-comparison' will
print "* new asciidoc flags" at the beginning of both 'make doc'
invokations.

Extend that 'sed' command to remove this line, too, wrap it in a
helper function so the output of both 'make doc' is filtered the same
way, and change its invokation to actually write the logfile to be
checked.

[1] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#set

[2] POSIX doesn't discuss the meaning of '! cmd' in case of simple
    commands, but it defines that "A pipeline is a sequence of one or
    more commands separated by the control operator '|'", so
    apparently a simple command is considered as pipeline as well.

    http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_09_02

[3] https://travis-ci.org/git/git/jobs/385932007#L1463

Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-05 14:41:16 +09:00
SZEDER Gábor f34a1bd96c ci: install Asciidoctor in 'ci/install-dependencies.sh'
When our '.travis.yml' was split into several 'ci/*' scripts [1], the
installation of the 'asciidoctor' gem somehow ended up in
'ci/test-documentation.sh'.

Install it in 'ci/install-dependencies.sh', where we install other
dependencies of the Documentation build job as well (asciidoc,
xmlto).

[1] 657343a602 (travis-ci: move Travis CI code into dedicated scripts,
    2017-09-10)

Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-01 15:17:47 +09:00
Johannes Schindelin eaa62291ff ci: inherit --jobs via MAKEFLAGS in run-build-and-tests
Let's not decide in the generic ci/ part how many jobs to run in
parallel; different CI configurations would favor a different number of
parallel jobs, and it is easy enough to hand that information down via
the `MAKEFLAGS` variable.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-28 10:34:28 -08:00
Johannes Schindelin b011fabd6e ci/lib.sh: encapsulate Travis-specific things
The upcoming patches will allow building git.git via Azure Pipelines
(i.e. Azure DevOps' Continuous Integration), where variable names and
URLs look a bit different than in Travis CI.

Also, the configurations of the available agents are different. For
example, Travis' and Azure Pipelines' macOS agents are set up
differently, so that on Travis, we have to install the git-lfs and
gettext Homebrew packages, and on Azure Pipelines we do not need to.
Likewise, Azure Pipelines' Ubuntu agents already have asciidoctor
installed.

Finally, on Azure Pipelines the natural way is not to base64-encode tar
files of the trash directories of failed tests, but to publish build
artifacts instead. Therefore, that code to log those base64-encoded tar
files is guarded to be Travis-specific.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-28 10:34:28 -08:00
Johannes Schindelin c2160f2d19 ci: rename the library of common functions
The name is hard-coded to reflect that we use Travis CI for continuous
testing.

In the next commits, we will extend this to be able use Azure DevOps,
too.

So let's adjust the name to make it more generic.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-28 10:34:28 -08:00
SZEDER Gábor b92cb86ea1 travis-ci: check that all build artifacts are .gitignore-d
Every once in a while our explicit .gitignore files get out of sync
when our build process learns to create new artifacts, like test
helper executables, but the .gitignore files are not updated
accordingly.

Use Travis CI to help catch such issues earlier: check that there are
no untracked files at the end of any build jobs building Git (i.e. the
64 bit Clang and GCC Linux and OSX build jobs, plus the GETTEXT_POISON
and 32 bit Linux build jobs) or its documentation, and fail the build
job if there are any present.

Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-03 13:29:19 -08:00
SZEDER Gábor 9cc2c76f5e travis-ci: record and skip successfully built trees
Travis CI dutifully builds and tests each new branch tip, even if its
tree has previously been successfully built and tested.  This happens
often enough in contributors' workflows, when a work-in-progress
branch is rebased changing e.g. only commit messages or the order or
number of commits while leaving the resulting code intact, and is then
pushed to a Travis CI-enabled GitHub fork.

This is wasting Travis CI's resources and is sometimes scary-annoying
when the new tip commit with a tree identical to the previous,
successfully tested one is suddenly reported in red, because one of
the OSX build jobs happened to exceed the time limit yet again.

So extend our Travis CI build scripts to skip building commits whose
trees have previously been successfully built and tested.  Use the
Travis CI cache feature to keep a record of the object names of trees
that tested successfully, in a plain and simple flat text file, one
line per tree object name.  Append the current tree's object name at
the end of every successful build job to this file, along with a bit
of additional info about the build job (commit object name, Travis CI
job number and id).  Limit the size of this file to 1000 records, to
prevent it from growing too large for git/git's forever living
integration branches.  Check, using a simple grep invocation, in each
build job whether the current commit's tree is already in there, and
skip the build if it is.  Include a message in the skipped build job's
trace log, containing the URL to the build job successfully testing
that tree for the first time and instructions on how to force a
re-build.  Catch the case when a build job, which successfully built
and tested a particular tree for the first time, is restarted and omit
the URL of the previous build job's trace log, as in this case it's
the same build job and the trace log has just been overwritten.

Note: this won't kick in if two identical trees are on two different
branches, because Travis CI caches are not shared between build jobs
of different branches.

Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-02 11:25:58 -08:00
Lars Schneider 657343a602 travis-ci: move Travis CI code into dedicated scripts
Most of the Travis CI commands are in the '.travis.yml'. The yml format
does not support functions and therefore code duplication is necessary
to run commands across all builds.

To fix this, add a library for common CI functions. Move all Travis CI
code into dedicated scripts and make them call the library first.

Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-11 09:54:08 +09:00
Lars Schneider 505ad91304 travis-ci: check AsciiDoc/AsciiDoctor stderr output
`make` does not necessarily fail with an error code if
Asciidoc/AsciiDoctor encounters problems. Anything written to stderr
might be a better indicator for problems.

Ensure that nothing is written to stderr during a documentation build.

The redirects do not work in `sh`, therefore the script uses `bash`.
This shouldn't be a problem as the script is only executed on TravisCI.

Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-04-26 18:19:09 -07:00
Lars Schneider a6e6976142 travis-ci: parallelize documentation build
The documentation job without parallelization takes ~10min on TravisCI.
With parallelization ("--jobs=2") it takes ~6min.

Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-04-16 17:28:51 -07:00
Lars Schneider 159e6010c2 travis-ci: build documentation with AsciiDoc and Asciidoctor
ec3366e introduced a knob to enable the use of Asciidoctor in addition
to AsciiDoc. Build the documentation on TravisCI with this knob to
reduce the likeliness of breaking Asciidoctor support in the future.

Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-04-16 17:27:56 -07:00
Lars Schneider b98712b9aa travis-ci: build documentation
Build documentation as separate Travis CI job to check for
documentation errors.

Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-10 11:19:07 -07:00