Граф коммитов

19 Коммитов

Автор SHA1 Сообщение Дата
Štěpán Němec 0adda9362a Use parentheses and `...' where appropriate
Remove some stray usage of other bracket types and asterisks for the
same purpose.

Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-08 12:31:07 -07:00
Steven Drake d8a8488d56 Add a "TEMPLATE DIRECTORY" section to git-init[1].
Create a more inoformative section to describe template directory and
refer to it in config.txt and with the '--template' option of git-init
and git-clone commands.

Signed-off-by: Steven Drake <sdrake@xnet.co.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-17 12:17:53 -08:00
Thomas Rast 0b444cdb19 Documentation: spell 'git cmd' without dash throughout
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.

The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.

Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
2010-01-10 13:01:28 +01:00
Nanako Shiraishi 53d4888593 git init: optionally allow a directory argument
When starting a new repository, I see my students often say

    % git init newrepo

and curse git.  They could say

    % mkdir newrepo; cd newrepo; git init

but allowing it as an obvious short-cut may be nicer.

Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-25 02:17:54 -07:00
Johan Herland 098082fb78 Update docs on behaviour of 'core.sharedRepository' and 'git init --shared'
This documentation update is needed to reflect the recent changes where
"core.sharedRepository = 0mode" was changed to set, not loosen, the
repository permissions.

Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-18 12:51:06 -07:00
Jonathan Nieder ba020ef5eb manpages: italicize git command names (which were in teletype font)
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.

Using

	doit () {
	  perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
	}
	for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
	        merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
	do
	  doit <"$i" >"$i+" && mv "$i+" "$i"
	done
	git diff

.

Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05 11:24:40 -07:00
Jonathan Nieder b1889c36d8 Documentation: be consistent about "git-" versus "git "
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)

This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.

The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.

Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01 17:20:15 -07:00
Stephan Beyer 3240240ff4 Docs: Use "-l::\n--long\n" format in OPTIONS sections
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.

Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.

Some are:

 -f, --foo::
 -f|--foo::
 -f | --foo::

But AsciiDoc has the special form:

 -f::
 --foo::

This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.

Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-08 13:46:38 -07:00
Christian Couder 9e1f0a85c6 documentation: move git(7) to git(1)
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06 11:18:28 -07:00
Luciano Rocha 74d3b23fe3 git-init: accept --bare option
It is unfortunate that "git init --bare" does not work and the only reason
why "init" did not learn its own "--bare" option is because "git --bare
init" already does the job (and as an option to the git 'potty', it is
more generic solution).

This teaches "git init" its own "--bare" option, so that both "git --bare init"
and "git init --bare" works mostly the same way.

[jc: rewrote the log message and added test]

Signed-off-by: Luciano Rocha <strange@nsk.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-28 18:31:19 -07:00
Heikki Orsila 06cbe85503 Make core.sharedRepository more generic
git init --shared=0xxx, where '0xxx' is an octal number, will create
a repository with file modes set to '0xxx'. Users with a safe umask
value (0077) can use this option to force file modes. For example,
'0640' is a group-readable but not group-writable regardless of
user's umask value. Values compatible with old Git versions are written
as they were before, for compatibility reasons. That is, "1" for
"group" and "2" for "everybody".

"git config core.sharedRepository 0xxx" is also handled.

Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-16 18:23:54 -07:00
Dan McGee 5162e69732 Documentation: rename gitlink macro to linkgit
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:

@@ -149,7 +153,10 @@
 # Inline macros.
 # Backslash prefix required for escape processing.
 # (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
 # Anchor: [[[id]]]. Bibliographic anchor.
 (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
 # Anchor: [[id,xreflabel]]

This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.

Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06 18:41:44 -08:00
Ralf Wildenhues 02ff62504e Fix some documentation typos.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-18 12:00:18 -08:00
Jeffrey C. Ollie 4576518dd7 Add an option to quiet git-init.
git-init lacks an option to suppress non-error and non-warning output -
this patch adds one.

Signed-off-by: Jeffrey C. Ollie <jeff@ocjtech.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-27 22:22:17 -07:00
Junio C Hamano a6080a0a44 War on whitespace
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time.  There are a few files that need
to have trailing whitespaces (most notably, test vectors).  The results
still passes the test, and build result in Documentation/ area is unchanged.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07 00:04:01 -07:00
Junio C Hamano c3f0baacad Documentation: sync git.txt command list and manual page title
Also reorders a handful entries to make each list sorted
alphabetically.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-18 15:53:37 -08:00
Nicolas Pitre 5c94f87e6b use 'init' instead of 'init-db' for shipped docs and tools
While 'init-db' still is and probably will always remain a valid git
command for obvious backward compatibility reasons, it would be a good
idea to move shipped tools and docs to using 'init' instead.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-12 13:36:16 -08:00
Junio C Hamano d145144c3b Document git-init
These days, the command does a lot more than just initialise the
object database (such as setting default config-variables,
installing template hooks...), and "git init" is actually a more
sensible name nowadays.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-11 12:58:10 -08:00
Nicolas Pitre c2cb959fe7 Add git-init documentation.
Oops. Commit 515377ea9e missed one
file, git-init documentation.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-10 13:38:03 -08:00