Add trace2 statistics around Bloom filter usage and behavior
for 'git log -- path' commands that are hoping to benefit from
the presence of computed changed paths Bloom filters.
These statistics are great for performance analysis work and
for formal testing, which we will see in the commit following
this one.
Helped-by: Derrick Stolee <dstolee@microsoft.com
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Revision walk will now use Bloom filters for commits to speed up
revision walks for a particular path (for computing history for
that path), if they are present in the commit-graph file.
We load the Bloom filters during the prepare_revision_walk step,
currently only when dealing with a single pathspec. Extending
it to work with multiple pathspecs can be explored and built on
top of this series in the future.
While comparing trees in rev_compare_trees(), if the Bloom filter
says that the file is not different between the two trees, we don't
need to compute the expensive diff. This is where we get our
performance gains. The other response of the Bloom filter is '`:maybe',
in which case we fall back to the full diff calculation to determine
if the path was changed in the commit.
We do not try to use Bloom filters when the '--walk-reflogs' option
is specified. The '--walk-reflogs' option does not walk the commit
ancestry chain like the rest of the options. Incorporating the
performance gains when walking reflog entries would add more
complexity, and can be explored in a later series.
Performance Gains:
We tested the performance of `git log -- <path>` on the git repo, the linux
and some internal large repos, with a variety of paths of varying depths.
On the git and linux repos:
- we observed a 2x to 5x speed up.
On a large internal repo with files seated 6-10 levels deep in the tree:
- we observed 10x to 20x speed ups, with some paths going up to 28 times
faster.
Helped-by: Derrick Stolee <dstolee@microsoft.com
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" can take a set of configured format.notes values
to specify which notes refs to use in the log message part of the
output. The behaviour of this was not consistent with multiple
--notes command line options, which has been corrected.
* dl/format-patch-notes-config-fixup:
notes.h: fix typos in comment
notes: break set_display_notes() into smaller functions
config/format.txt: clarify behavior of multiple format.notes
format-patch: move git_config() before repo_init_revisions()
format-patch: use --notes behavior for format.notes
notes: extract logic into set_display_notes()
notes: create init_display_notes() helper
notes: rename to load_display_notes()
In 8164c961e1 (format-patch: use --notes behavior for format.notes,
2019-12-09), we introduced set_display_notes() which was a monolithic
function with three mutually exclusive branches. Break the function up
into three small and simple functions that each are only responsible for
one task.
This family of functions accepts an `int *show_notes` instead of
returning a value suitable for assignment to `show_notes`. This is for
two reasons. First of all, this guarantees that the external
`show_notes` variable changes in lockstep with the
`struct display_notes_opt`. Second, this prompts future developers to be
careful about doing something meaningful with this value. In fact, a
NULL check is intentionally omitted because causing a segfault here
would tell the future developer that they are meant to use the value for
something meaningful.
One alternative was making the family of functions accept a
`struct rev_info *` instead of the `struct display_notes_opt *`, since
the former contains the `show_notes` field as well. This does not work
because we have to call git_config() before repo_init_revisions().
However, if we had a `struct rev_info`, we'd need to initialize it before
it gets assigned values from git_config(). As a result, we break the
circular dependency by having standalone `int show_notes` and
`struct display_notes_opt notes_opt` variables which temporarily hold
values from git_config() until the values are copied over to `rev`.
To implement this change, we need to get a pointer to
`rev_info::show_notes`. Unfortunately, this is not possible with
bitfields and only direct-assignment is possible. Change
`rev_info::show_notes` to a non-bitfield int so that we can get its
address.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log" family learned "--pretty=reference" that gives the name
of a commit in the format that is often used to refer to it in log
messages.
* dl/pretty-reference:
SubmittingPatches: use `--pretty=reference`
pretty: implement 'reference' format
pretty: add struct cmt_fmt_map::default_date_mode_type
pretty: provide short date format
t4205: cover `git log --reflog -z` blindspot
pretty.c: inline initalize format_context
revision: make get_revision_mark() return const pointer
completion: complete `tformat:` pretty format
SubmittingPatches: remove dq from commit reference
pretty-formats.txt: use generic terms for hash
SubmittingPatches: use generic terms for hash
Instead of open coding the logic that tweaks the variables in
`struct display_notes_opt` within handle_revision_opt(), abstract away the
logic into set_display_notes() so that it can be reused.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently open code the initialization for revs->notes_opt. Abstract
this away into a helper function so that the logic can be reused in a
future commit.
This is slightly wasteful as we memset the struct twice but this is only
run once so it shouldn't have any major effect.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The revision walking machinery uses resources like per-object flag
bits that need to be reset before a new iteration of walking
begins, but the resources related to topological walk were not
cleared correctly, which has been corrected.
* mh/clear-topo-walk-upon-reset:
revision: free topo_walk_info before creating a new one in init_topo_walk
revision: clear the topo-walk flags in reset_revision_walk
init_topo_walk doesn't reuse an existing topo_walk_info, and currently
leaks the one that might exist on the current rev_info if it was already
used for a topo walk beforehand.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not doing so can lead to wrong topo-walks when using the revision walk API
consecutively.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_revision_mark() used to return a `char *`, even though all of the
strings it was returning were string literals. Make get_revision_mark()
return a `const char *` so that callers won't be tempted to modify the
returned string.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few simplification and bugfixes to PCRE interface.
* ab/pcre-jit-fixes:
grep: under --debug, show whether PCRE JIT is enabled
grep: do not enter PCRE2_UTF mode on fixed matching
grep: stess test PCRE v2 on invalid UTF-8 data
grep: create a "is_fixed" member in "grep_pat"
grep: consistently use "p->fixed" in compile_regexp()
grep: stop using a custom JIT stack with PCRE v1
grep: stop "using" a custom JIT stack with PCRE v2
grep: remove overly paranoid BUG(...) code
grep: use PCRE v2 for optimized fixed-string search
grep: remove the kwset optimization
grep: drop support for \0 in --fixed-strings <pattern>
grep: make the behavior for NUL-byte in patterns sane
grep tests: move binary pattern tests into their own file
grep tests: move "grep binary" alongside the rest
grep: inline the return value of a function call used only once
t4210: skip more command-line encoding tests on MinGW
grep: don't use PCRE2?_UTF8 with "log --encoding=<non-utf8>"
log tests: test regex backends in "--encode=<enc>" tests
"git log --decorate-refs-exclude=<pattern>" was incorrectly
overruled when the "--simplify-by-decoration" option is used, which
has been corrected.
* rs/simplify-by-deco-with-deco-refs-exclude:
log-tree: call load_ref_decorations() in get_name_decoration()
log: test --decorate-refs-exclude with --simplify-by-decoration
Since these macros already take a `keyvar' pointer of a known type,
we can rely on OFFSETOF_VAR to get the correct offset without
relying on non-portable `__typeof__' and `offsetof'.
Argument order is also rearranged, so `keyvar' and `member' are
sequential as they are used as: `keyvar->member'
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we cannot rely on a `__typeof__' operator being portable
to use with `offsetof'; we can calculate the pointer offset
using an existing pointer and the address of a member using
pointer arithmetic for compilers without `__typeof__'.
This allows us to simplify usage of hashmap iterator macros
by not having to specify a type when a pointer of that type
is already given.
In the future, list iterator macros (e.g. list_for_each_entry)
may also be implemented using OFFSETOF_VAR to save hackers the
trouble of using container_of/list_entry macros and without
relying on non-portable `__typeof__'.
v3: use `__typeof__' to avoid clang warnings
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`hashmap_free_entries' behaves like `container_of' and passes
the offset of the hashmap_entry struct to the internal
`hashmap_free_' function, allowing the function to free any
struct pointer regardless of where the hashmap_entry field
is located.
`hashmap_free' no longer takes any arguments aside from
the hashmap itself.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inspired by list_for_each_entry in the Linux kernel.
Once again, these are somewhat compromised usability-wise
by compilers lacking __typeof__ support.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Another step in eliminating the requirement of hashmap_entry
being the first member of a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update callers to use hashmap_get_entry, hashmap_get_entry_from_hash
or container_of as appropriate.
This is another step towards eliminating the requirement of
hashmap_entry being the first field in a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is less error-prone than "void *" as the compiler now
detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is less error-prone than "const void *" as the compiler
now detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
C compilers do type checking to make life easier for us. So
rely on that and update all hashmap_entry_init callers to take
"struct hashmap_entry *" to avoid future bugs while improving
safety and readability.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Load a default set of ref name decorations at the first lookup. This
frees direct and indirect callers from doing so. They can still do it
if they want to use a filter or are interested in full decorations
instead of the default short ones -- the first load_ref_decorations()
call wins.
This means that the load in builtin/log.c::cmd_log_init_finish() is
respected even if --simplify-by-decoration is given, as the previously
dominating earlier load in handle_revision_opt() is gone. So a filter
given with --decorate-refs-exclude is used for simplification in that
case, as expected.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function for accessing the ID of the object referenced by a tag
safely, i.e. without causing a segfault when encountering a broken tag
where ->tagged is NULL.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's currently no robust way to tell Git that a particular option is
meant to be a revision, and not an option. So if you have a branch
"refs/heads/--foo", you cannot just say:
git rev-list --foo
You can say:
git rev-list refs/heads/--foo
But that breaks down if you don't know the refname, and in particular if
you're a script passing along a value from elsewhere. In most programs,
you can use "--" to end option parsing, like this:
some-prog -- "$revision"
But that doesn't work for the revision parser, because "--" is already
meaningful there: it separates revisions from pathspecs. So we need some
other marker to separate options from revisions.
This patch introduces "--end-of-options", which serves that purpose:
git rev-list --oneline --end-of-options "$revision"
will work regardless of what's in "$revision" (well, if you say "--" it
may fail, but it won't do something dangerous, like triggering an
unexpected option).
The name is verbose, but that's probably a good thing; this is meant to
be used for scripted invocations where readability is more important
than terseness.
One alternative would be to introduce an explicit option to mark a
revision, like:
git rev-list --oneline --revision="$revision"
That's slightly _more_ informative than this commit (because it makes
even something silly like "--" unambiguous). But the pattern of using a
separator like "--" is well established in git and in other commands,
and it makes some scripting tasks simpler like:
git rev-list --end-of-options "$@"
There's no documentation in this patch, because it will make sense to
describe the feature once it is available everywhere (and support will
be added in further patches).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tips of refs from the alternate object store can be used as
starting point for reachability computation now.
* jk/check-connected-with-alternates:
check_everything_connected: assume alternate ref tips are valid
object-store.h: move for_each_alternate_ref() from transport.h
When we receive a remote ref update to sha1 "X", we want to check that
we have all of the objects needed by "X". We can assume that our
repository is not currently corrupted, and therefore if we have a ref
pointing at "Y", we have all of its objects. So we can stop our
traversal from "X" as soon as we hit "Y".
If we make the same non-corruption assumption about any repositories we
use to store alternates, then we can also use their ref tips to shorten
the traversal.
This is especially useful when cloning with "--reference", as we
otherwise do not have any local refs to check against, and have to
traverse the whole history, even though the other side may have sent us
few or no objects. Here are results for the included perf test (which
shows off more or less the maximal savings, getting one new commit and
sharing the whole history):
Test HEAD^ HEAD
--------------------------------------------------------------------
[on git.git]
5600.3: clone --reference 2.94(2.86+0.08) 0.09(0.08+0.01) -96.9%
[on linux.git]
5600.3: clone --reference 45.74(45.34+0.41) 0.36(0.30+0.08) -99.2%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug introduced in 18547aacf5 ("grep/pcre: support utf-8",
2016-06-25) that was missed due to a blindspot in our tests, as
discussed in the previous commit. I then blindly copied the same bug
in 94da9193a6 ("grep: add support for PCRE v2", 2017-06-01) when
adding the PCRE v2 code.
We should not tell PCRE that we're processing UTF-8 just because we're
dealing with non-ASCII. In the case of e.g. "log --encoding=<...>"
under is_utf8_locale() the haystack might be in ISO-8859-1, and the
needle might be in a non-UTF-8 encoding.
Maybe we should be more strict here and die earlier? Should we also be
converting the needle to the encoding in question, and failing if it's
not a string that's valid in that encoding? Maybe.
But for now matching this as non-UTF8 at least has some hope of
producing sensible results, since we know that our default heuristic
of assuming the text to be matched is in the user locale encoding
isn't true when we've explicitly encoded it to be in a different
encoding.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When updating the topo-order walk in b454241 (revision.c: generation-based
topo-order algorithm, 2018-11-01), the logic was a huge rewrite of the
walk logic. In that massive change, we accidentally included the
UNINTERESTING commits in expand_topo_walk(). This means that a simple
query like
git rev-list --topo-order HEAD~1..HEAD
will expand the topo walk for all commits reachable from HEAD, and not
just one commit.
This change should speed up these cases, but there is still a need
for corrected commit-date for some A..B queries.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a commit-graph exists with computed generation numbers, then a
'git rev-list --topo-order -n <N> <rev>' query will use those generation
numbers to reduce the number of commits walked before writing N commits.
One caveat put in b454241 (revision.c: generation-based topo-order
algorithm, 2018-11-01) was to not enable the new algorithm for queries
with a revision range "A..B". The logic was placed to walk from "A" and
mark those commits as uninteresting, but the performance was actually
worse than the existing logic in some cases.
The root cause of this performance degradation is that generation
numbers _increase_ the number of commits we walk relative to the
existing heuristic of walking by commit date. While generation numbers
actually guarantee that the algorithm is correct, the existing logic
is very rarely wrong and that added requirement is not worth the cost.
This motivates the planned "corrected commit date" to replace
generation numbers in a future version of Git.
The current change enables the logic to use whatever reachability
index is currently in the commit-graph (generation numbers or
corrected commit date).
The limited flag in struct rev_info forces a full walk of the
commit history (after discovering the A..B range). Previosuly, it
is enabled whenever we see an uninteresting commit. We prevent
enabling the parameter when we are planning to use the reachability
index for a topo-order.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Performance fix for "rev-list --parents -- pathspec".
* jk/revision-rewritten-parents-in-prio-queue:
revision: use a prio_queue to hold rewritten parents
Code cleanup.
* jk/unused-params-even-more:
parse_opt_ref_sorting: always use with NONEG flag
pretty: drop unused strbuf from parse_padding_placeholder()
pretty: drop unused "type" parameter in needs_rfc2047_encoding()
parse-options: drop unused ctx parameter from show_gitcomp()
fetch_pack(): drop unused parameters
report_path_error(): drop unused prefix parameter
unpack-trees: drop unused error_type parameters
unpack-trees: drop name_entry from traverse_by_cache_tree()
test-date: drop unused "now" parameter from parse_dates()
update-index: drop unused prefix_length parameter from do_reupdate()
log: drop unused "len" from show_tagger()
log: drop unused rev_info from early output
revision: drop some unused "revs" parameters
"git log -L<from>,<to>:<path>" with "-s" did not suppress the patch
output as it should. This has been corrected.
* jk/line-log-with-patch:
line-log: detect unsupported formats
line-log: suppress diff output with "-s"
This patch fixes a quadratic list insertion in rewrite_one() when
pathspec limiting is combined with --parents. What happens is something
like this:
1. We see that some commit X touches the path, so we try to rewrite
its parents.
2. rewrite_one() loops forever, rewriting parents, until it finds a
relevant parent (or hits the root and decides there are none). The
heavy lifting is done by process_parent(), which uses
try_to_simplify_commit() to drop parents.
3. process_parent() puts any intermediate parents into the
&revs->commits list, inserting by commit date as usual.
So if commit X is recent, and then there's a large chunk of history that
doesn't touch the path, we may add a lot of commits to &revs->commits.
And insertion by commit date is O(n) in the worst case, making the whole
thing quadratic.
We tried to deal with this long ago in fce87ae538 (Fix quadratic
performance in rewrite_one., 2008-07-12). In that scheme, we cache the
oldest commit in the list; if the new commit to be added is older, we
can start our linear traversal there. This often works well in practice
because parents are older than their descendants, and thus we tend to
add older and older commits as we traverse.
But this isn't guaranteed, and in fact there's a simple case where it is
not: merges. Imagine we look at the first parent of a merge and see a
very old commit (let's say 3 years old). And on the second parent, as we
go back 3 years in history, we might have many commits. That one
first-parent commit has polluted our oldest-commit cache; it will remain
the oldest while we traverse a huge chunk of history, during which we
have to fall back to the slow, linear method of adding to the list.
Naively, one might imagine that instead of caching the oldest commit,
we'd start at the last-added one. But that just makes some cases faster
while making others slower (and indeed, while it made a real-world test
case much faster, it does quite poorly in the perf test include here).
Fundamentally, these are just heuristics; our worst case is still
quadratic, and some cases will approach that.
Instead, let's use a data structure with better worst-case performance.
Swapping out revs->commits for something else would have repercussions
all over the code base, but we can take advantage of one fact: for the
rewrite_one() case, nobody actually needs to see those commits in
revs->commits until we've finished generating the whole list.
That leaves us with two obvious options:
1. We can generate the list _unordered_, which should be O(n), and
then sort it afterwards, which would be O(n log n) total. This is
"sort-after" below.
2. We can insert the commits into a separate data structure, like a
priority queue. This is "prio-queue" below.
I expected that sort-after would be the fastest (since it saves us the
extra step of copying the items into the linked list), but surprisingly
the prio-queue seems to be a bit faster.
Here are timings for the new p0001.6 for all three techniques across a
few repositories, as compared to master:
master cache-last sort-after prio-queue
--------------------------------------------------------------------------------------------
GIT_PERF_REPO=git.git
0.52(0.50+0.02) 0.53(0.51+0.02) +1.9% 0.37(0.33+0.03) -28.8% 0.37(0.32+0.04) -28.8%
GIT_PERF_REPO=linux.git
20.81(20.74+0.07) 20.31(20.24+0.07) -2.4% 0.94(0.86+0.07) -95.5% 0.91(0.82+0.09) -95.6%
GIT_PERF_REPO=llvm-project.git
83.67(83.57+0.09) 4.23(4.15+0.08) -94.9% 3.21(3.15+0.06) -96.2% 2.98(2.91+0.07) -96.4%
A few items to note:
- the cache-list tweak does improve the bad case for llvm-project.git
that started my digging into this problem. But it performs terribly
on linux.git, barely helping at all.
- the sort-after and prio-queue techniques work well. They approach
the timing for running without --parents at all, which is what you'd
expect (see below for more data).
- prio-queue just barely outperforms sort-after. As I said, I'm not
really sure why this is the case, but it is. You can see it even
more prominently in this real-world case on llvm-project.git:
git rev-list --parents 07ef786652e7 -- llvm/test/CodeGen/Generic/bswap.ll
where prio-queue routinely outperforms sort-after by about 7%. One
guess is that the prio-queue may just be more efficient because it
uses a compact array.
There are three new perf tests:
- "rev-list --parents" gives us a baseline for running with --parents.
This isn't sped up meaningfully here, because the bad case is
triggered only with simplification. But it's good to make sure we
don't screw it up (now, or in the future).
- "rev-list -- dummy" gives us a baseline for just traversing with
pathspec limiting. This gives a lower bound for the next test (and
it's also a good thing for us to be checking in general for
regressions, since we don't seem to have any existing tests).
- "rev-list --parents -- dummy" shows off the problem (and our fix)
Here are the timings for those three on llvm-project.git, before and
after the fix:
Test master prio-queue
------------------------------------------------------------------------------
0001.3: rev-list --parents 2.24(2.12+0.12) 2.22(2.11+0.11) -0.9%
0001.5: rev-list -- dummy 2.89(2.82+0.07) 2.92(2.89+0.03) +1.0%
0001.6: rev-list --parents -- dummy 83.67(83.57+0.09) 2.98(2.91+0.07) -96.4%
Changes in the first two are basically noise, and you can see we
approach our lower bound in the final one.
Note that we can't fully get rid of the list argument from
process_parents(). Other callers do have lists, and it would be hard to
convert them. They also don't seem to have this problem (probably
because they actually remove items from the list as they loop, meaning
it doesn't grow so large in the first place). So this basically just
drops the "cache_ptr" parameter (which was used only by the one caller
we're fixing here) and replaces it with a prio_queue. Callers are free
to use either data structure, depending on what they're prepared to
handle.
Reported-by: Björn Pettersson A <bjorn.a.pettersson@ericsson.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several internal helpers that take a rev_info struct but don't
actually look at it. While one could argue that all helpers in
revision.c should take a rev_info struct for consistency, dropping the
unused parameter makes it clear that they don't actually depend on any
other rev options.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you use "log -L" with an output format like "--raw" or "--stat",
we'll silently ignore the format and just output the normal patch.
Let's detect and complain about this, which at least tells the user
what's going on.
The tests here aren't exhaustive over the set of all formats, but it
should at least let us know if somebody breaks the format-checking.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Output from "diff --cc" did not show the original paths when the
merge involved renames. A new option adds the paths in the
original trees to the output.
* en/combined-all-paths:
log,diff-tree: add --combined-all-paths option
The combined diff format for merges will only list one filename, even if
rename or copy detection is active. For example, with raw format one
might see:
::100644 100644 100644 fabadb8cc95eb04866510 MM describe.c
::100755 100755 100755 52b7a2d 6d1ac04 d2ac7d7 RM bar.sh
::100644 100644 100644 e07d6c5 9042e82 ee91881 RR phooey.c
This doesn't let us know what the original name of bar.sh was in the
first parent, and doesn't let us know what either of the original names
of phooey.c were in either of the parents. In contrast, for non-merge
commits, raw format does provide original filenames (and a rename score
to boot). In order to also provide original filenames for merge
commits, add a --combined-all-paths option (which must be used with
either -c or --cc, and is likely only useful with rename or copy
detection active) so that we can print tab-separated filenames when
renames are involved. This transforms the above output to:
::100644 100644 100644 fabadb8cc95eb04866510 MM desc.c desc.c desc.c
::100755 100755 100755 52b7a2d 6d1ac04 d2ac7d7 RM foo.sh bar.sh bar.sh
::100644 100644 100644 e07d6c5 9042e82 ee91881 RR fooey.c fuey.c phooey.c
Further, in patch format, this changes the from/to headers so that
instead of just having one "from" header, we get one for each parent.
For example, instead of having
--- a/phooey.c
+++ b/phooey.c
we would see
--- a/fooey.c
--- a/fuey.c
+++ b/phooey.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pack-objects" learned another algorithm to compute the set of
objects to send, that trades the resulting packfile off to save
traversal cost to favor small pushes.
* ds/push-sparse-tree-walk:
pack-objects: create GIT_TEST_PACK_SPARSE
pack-objects: create pack.useSparse setting
revision: implement sparse algorithm
list-objects: consume sparse tree walk
revision: add mark_tree_uninteresting_sparse
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
Micro-optimize the code that prepares commit objects to be walked
by "git rev-list" when the commit-graph is available.
* jt/get-reference-with-commit-graph:
revision: use commit graph in get_reference()
The code to walk tree objects has been taught that we may be
working with object names that are not computed with SHA-1.
* bc/tree-walk-oid:
cache: make oidcpy always copy GIT_MAX_RAWSZ bytes
tree-walk: store object_id in a separate member
match-trees: use hashcpy to splice trees
match-trees: compute buffer offset correctly when splicing
tree-walk: copy object ID before use
When enumerating objects to place in a pack-file during 'git
pack-objects --revs', we discover the "frontier" of commits
that we care about and the boundary with commit we find
uninteresting. From that point, we walk trees to discover which
trees and blobs are uninteresting. Finally, we walk trees from the
interesting commits to find the interesting objects that are
placed in the pack.
This commit introduces a new, "sparse" way to discover the
uninteresting trees. We use the perspective of a single user trying
to push their topic to a large repository. That user likely changed
a very small fraction of the paths in their working directory, but
we spend a lot of time walking all reachable trees.
The way to switch the logic to work in this sparse way is to start
caring about which paths introduce new trees. While it is not
possible to generate a diff between the frontier boundary and all
of the interesting commits, we can simulate that behavior by
inspecting all of the root trees as a whole, then recursing down
to the set of trees at each path.
We already had taken the first step by passing an oidset to
mark_trees_uninteresting_sparse(). We now create a dictionary
whose keys are paths and values are oidsets. We consider the set
of trees that appear at each path. While we inspect a tree, we
add its subtrees to the oidsets corresponding to the tree entry's
path. We also mark trees as UNINTERESTING if the tree we are
parsing is UNINTERESTING.
To actually improve the performance, we need to terminate our
recursion. If the oidset contains only UNINTERESTING trees, then
we do not continue the recursion. This avoids walking trees that
are likely to not be reachable from interesting trees. If the
oidset contains only interesting trees, then we will walk these
trees in the final stage that collects the intersting objects to
place in the pack. Thus, we only recurse if the oidset contains
both interesting and UNINITERESTING trees.
There are a few ways that this is not a universally better option.
First, we can pack extra objects. If someone copies a subtree
from one tree to another, the first tree will appear UNINTERESTING
and we will not recurse to see that the subtree should also be
UNINTERESTING. We will walk the new tree and see the subtree as
a "new" object and add it to the pack. A test is modified to
demonstrate this behavior and to verify that the new logic is
being exercised.
Second, we can have extra memory pressure. If instead of being a
single user pushing a small topic we are a server sending new
objects from across the entire working directory, then we will
gain very little (the recursion will rarely terminate early) but
will spend extra time maintaining the path-oidset dictionaries.
Despite these potential drawbacks, the benefits of the algorithm
are clear. By adding a counter to 'add_children_by_path' and
'mark_tree_contents_uninteresting', I measured the number of
parsed trees for the two algorithms in a variety of repos.
For git.git, I used the following input:
v2.19.0
^v2.19.0~10
Objects to pack: 550
Walked (old alg): 282
Walked (new alg): 130
For the Linux repo, I used the following input:
v4.18
^v4.18~10
Objects to pack: 518
Walked (old alg): 4,836
Walked (new alg): 188
The two repos above are rather "wide and flat" compared to
other repos that I have used in the past. As a comparison,
I tested an old topic branch in the Azure DevOps repo, which
has a much deeper folder structure than the Linux repo.
Objects to pack: 220
Walked (old alg): 22,804
Walked (new alg): 129
I used the number of walked trees the main metric above because
it is consistent across multiple runs. When I ran my tests, the
performance of the pack-objects command with the same options
could change the end-to-end time by 10x depending on the file
system being warm. However, by repeating the same test on repeat
I could get more consistent timing results. The git.git and
Linux tests were too fast overall (less than 0.5s) to measure
an end-to-end difference. The Azure DevOps case was slow enough
to see the time improve from 15s to 1s in the warm case. The
cold case was 90s to 9s in my testing.
These improvements will have even larger benefits in the super-
large Windows repository. In our experiments, we see the
"Enumerate objects" phase of pack-objects taking 60-80% of the
end-to-end time of non-trivial pushes, taking longer than the
network time to send the pack and the server time to verify the
pack.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for a new algorithm that walks fewer trees when
creating a pack from a set of revisions, create a method that
takes an oidset of tree oids and marks reachable objects as
UNINTERESTING.
The current implementation uses the existing
mark_tree_uninteresting to recursively walk the trees and blobs.
This will walk the same number of trees as the old mechanism. To
ensure that mark_tree_uninteresting walks the tree, we need to
remove the UNINTERESTING flag before calling the method. This
implementation will be replaced entirely in a later commit.
There is one new assumption in this approach: we are also given
the oids of the interesting trees. This implementation does not
use those trees at the moment, but we will use them in a later
rewrite of this method.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing a tree, we read the object ID directly out of the tree
buffer. This is normally fine, but such an object ID cannot be used with
oidcpy, which copies GIT_MAX_RAWSZ bytes, because if we are using SHA-1,
there may not be that many bytes to copy.
Instead, store the object ID in a separate struct member. Since we can
no longer efficiently compute the path length, store that information as
well in struct name_entry. Ensure we only copy the object ID into the
new buffer if the path length is nonzero, as some callers will pass us
an empty path with no object ID following it, and we will not want to
read past the end of the buffer.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The traversal over tree objects has learned to honor
":(attr:label)" pathspec match, which has been implemented only for
enumerating paths on the filesystem.
* nd/attr-pathspec-in-tree-walk:
tree-walk: support :(attr) matching
dir.c: move, rename and export match_attrs()
pathspec.h: clean up "extern" in function declarations
tree-walk.c: make tree_entry_interesting() take an index
tree.c: make read_tree*() take 'struct repository *'
"git rev-list --exclude-promisor-objects" had to take an object
that does not exist locally (and is lazily available) from the
command line without barfing, but the code dereferenced NULL.
* md/list-lazy-objects-fix:
list-objects.c: don't segfault for missing cmdline objects
This kills the_index dependency in get_oid_with_context() but for
get_oid() and friends, they still assume the_repository (which also
means the_index).
Unfortunately the widespread use of get_oid() will make it hard to
make the conversion now. We probably will add repo_get_oid() at some
point and limit the use of get_oid() in builtin/ instead of forcing
all get_oid() call sites to carry struct repository.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_index() shares the same problem as hold_locked_index(): it
assumes $GIT_DIR/index. Move all call sites to repo_read_index()
instead. read_index_preload() and read_index_unmerged() are also
killed as a consequence.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching into a repository, a connectivity check is first made by
check_exist_and_connected() in builtin/fetch.c that runs:
git rev-list --objects --stdin --not --all --quiet <(list of objects)
If the client repository has many refs, this command can be slow,
regardless of the nature of the server repository or what is being
fetched. A profiler reveals that most of the time is spent in
setup_revisions() (approx. 60/63), and of the time spent in
setup_revisions(), most of it is spent in parse_object() (approx.
49/60). This is because setup_revisions() parses the target of every ref
(from "--all"), and parse_object() reads the buffer of the object.
Reading the buffer is unnecessary if the repository has a commit graph
and if the ref points to a commit (which is typically the case). This
patch uses the commit graph wherever possible; on my computer, when I
run the above command with a list of 1 object on a many-ref repository,
I get a speedup from 1.8s to 1.0s.
Another way to accomplish this effect would be to modify parse_object()
to use the commit graph if possible; however, I did not want to change
parse_object()'s current behavior of always checking the object
signature of the returned object.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We indent with TABs and sometimes for fine alignment, TABs followed by
spaces, but never all spaces (unless the indentation is less than 8
columns). Indenting with spaces slips through in some places. Fix
them.
Imported code and compat/ are left alone on purpose. The former should
remain as close as upstream as possible. The latter pretty much has
separate maintainers, it's up to them to decide.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Put the allow_exclude_promisor_objects flag in setup_revision_opt. When
it was in rev_info, it was unclear when it was used, since rev_info is
passed to functions that don't use the flag. This resulted in
unnecessary setting of the flag in prune.c, so fix that as well.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a command is invoked with both --exclude-promisor-objects,
--objects-edge-aggressive, and a missing object on the command line,
the rev_info.cmdline array could get a NULL pointer for the value of
an 'item' field. Prevent dereferencing of a NULL pointer in that
situation.
Properly handle --ignore-missing. If it is not passed, die when an
object is missing. Otherwise, just silently ignore it.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to support :(attr) when matching pathspec on a tree,
tree_entry_interesting() needs to take an index (because
git_check_attr() needs it). This is the preparation step for it. This
also makes it clearer what index we fall back to when looking up
attributes during an unpack-trees operation: the source index.
This also fixes revs->pruning.repo initialization that should have
been done in 2abf350385 (revision.c: remove implicit dependency on
the_index - 2018-09-21). Without it, skip_uninteresting() will
dereference a NULL pointer through this call chain
get_revision(revs)
get_revision_internal
get_revision_1
try_to_simplify_commit
rev_compare_tree
diff_tree_oid(..., &revs->pruning)
ll_diff_tree_oid
diff_tree_paths
ll_diff_tree
skip_uninteresting
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The revision walker machinery learned to take advantage of the
commit generation numbers stored in the commit-graph file.
* ds/reachable-topo-order:
t6012: make rev-list tests more interesting
revision.c: generation-based topo-order algorithm
commit/revisions: bookkeeping before refactoring
revision.c: begin refactoring --topo-order logic
test-reach: add rev-list tests
test-reach: add run_three_modes method
prio-queue: add 'peek' operation
Assorted fixes for bugs found while auditing -Wunused-parameter
warnings.
* jk/misc-unused-fixes:
approxidate: fix NULL dereference in date_time()
pathspec: handle non-terminated strings with :(attr)
approxidate: handle pending number for "specials"
rev-list: handle flags for --indexed-objects
The code to traverse objects for reachability, used to decide what
objects are unreferenced and expendable, have been taught to also
consider per-worktree refs of other worktrees as starting points to
prevent data loss.
* nd/per-worktree-ref-iteration:
git-worktree.txt: correct linkgit command name
reflog expire: cover reflog from all worktrees
fsck: check HEAD and reflog from other worktrees
fsck: move fsck_head_link() to get_default_heads() to avoid some globals
revision.c: better error reporting on ref from different worktrees
revision.c: correct a parameter name
refs: new ref types to make per-worktree refs visible to all worktrees
Add a place for (not) sharing stuff between worktrees
refs.c: indent with tabs, not spaces
Operations on promisor objects make sense in the context of only a
small subset of the commands that internally use the revisions
machinery, but the "--exclude-promisor-objects" option were taken
and led to nonsense results by commands like "log", to which it
didn't make much sense. This has been corrected.
* md/exclude-promisor-objects-fix:
exclude-promisor-objects: declare when option is allowed
Documentation/git-log.txt: do not show --exclude-promisor-objects
When a traversal sees the --indexed-objects option, it adds
all blobs and valid cache-trees from the index to the
traversal using add_index_objects_to_pending(). But that
function totally ignores its flags parameter!
That means that doing:
git rev-list --objects --indexed-objects
and
git rev-list --objects --not --indexed-objects
produce the same output, because we ignore the UNINTERESTING
flag when walking the index in the second example.
Nobody noticed because this feature was added as a way for
tools like repack to increase their coverage of reachable
objects, meaning it would only be used like the first
example above.
But since it's user facing (and because the documentation
describes it "as if the objects are listed on the command
line"), we should make sure the negative case behaves
sensibly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current --topo-order algorithm requires walking all
reachable commits up front, topo-sorting them, all before
outputting the first value. This patch introduces a new
algorithm which uses stored generation numbers to
incrementally walk in topo-order, outputting commits as
we go. This can dramatically reduce the computation time
to write a fixed number of commits, such as when limiting
with "-n <N>" or filling the first page of a pager.
When running a command like 'git rev-list --topo-order HEAD',
Git performed the following steps:
1. Run limit_list(), which parses all reachable commits,
adds them to a linked list, and distributes UNINTERESTING
flags. If all unprocessed commits are UNINTERESTING, then
it may terminate without walking all reachable commits.
This does not occur if we do not specify UNINTERESTING
commits.
2. Run sort_in_topological_order(), which is an implementation
of Kahn's algorithm. It first iterates through the entire
set of important commits and computes the in-degree of each
(plus one, as we use 'zero' as a special value here). Then,
we walk the commits in priority order, adding them to the
priority queue if and only if their in-degree is one. As
we remove commits from this priority queue, we decrement the
in-degree of their parents.
3. While we are peeling commits for output, get_revision_1()
uses pop_commit on the full list of commits computed by
sort_in_topological_order().
In the new algorithm, these three steps correspond to three
different commit walks. We run these walks simultaneously,
and advance each only as far as necessary to satisfy the
requirements of the 'higher order' walk. We know when we can
pause each walk by using generation numbers from the commit-
graph feature.
Recall that the generation number of a commit satisfies:
* If the commit has at least one parent, then the generation
number is one more than the maximum generation number among
its parents.
* If the commit has no parent, then the generation number is one.
There are two special generation numbers:
* GENERATION_NUMBER_INFINITY: this value is 0xffffffff and
indicates that the commit is not stored in the commit-graph and
the generation number was not previously calculated.
* GENERATION_NUMBER_ZERO: this value (0) is a special indicator
to say that the commit-graph was generated by a version of Git
that does not compute generation numbers (such as v2.18.0).
Since we use generation_numbers_enabled() before using the new
algorithm, we do not need to worry about GENERATION_NUMBER_ZERO.
However, the existence of GENERATION_NUMBER_INFINITY implies the
following weaker statement than the usual we expect from
generation numbers:
If A and B are commits with generation numbers gen(A) and
gen(B) and gen(A) < gen(B), then A cannot reach B.
Thus, we will walk in each of our stages until the "maximum
unexpanded generation number" is strictly lower than the
generation number of a commit we are about to use.
The walks are as follows:
1. EXPLORE: using the explore_queue priority queue (ordered by
maximizing the generation number), parse each reachable
commit until all commits in the queue have generation
number strictly lower than needed. During this walk, update
the UNINTERESTING flags as necessary.
2. INDEGREE: using the indegree_queue priority queue (ordered
by maximizing the generation number), add one to the in-
degree of each parent for each commit that is walked. Since
we walk in order of decreasing generation number, we know
that discovering an in-degree value of 0 means the value for
that commit was not initialized, so should be initialized to
two. (Recall that in-degree value "1" is what we use to say a
commit is ready for output.) As we iterate the parents of a
commit during this walk, ensure the EXPLORE walk has walked
beyond their generation numbers.
3. TOPO: using the topo_queue priority queue (ordered based on
the sort_order given, which could be commit-date, author-
date, or typical topo-order which treats the queue as a LIFO
stack), remove a commit from the queue and decrement the
in-degree of each parent. If a parent has an in-degree of
one, then we add it to the topo_queue. Before we decrement
the in-degree, however, ensure the INDEGREE walk has walked
beyond that generation number.
The implementations of these walks are in the following methods:
* explore_walk_step and explore_to_depth
* indegree_walk_step and compute_indegrees_to_depth
* next_topo_commit and expand_topo_walk
These methods have some patterns that may seem strange at first,
but they are probably carry-overs from their equivalents in
limit_list and sort_in_topological_order.
One thing that is missing from this implementation is a proper
way to stop walking when the entire queue is UNINTERESTING, so
this implementation is not enabled by comparisions, such as in
'git rev-list --topo-order A..B'. This can be updated in the
future.
In my local testing, I used the following Git commands on the
Linux repository in three modes: HEAD~1 with no commit-graph,
HEAD~1 with a commit-graph, and HEAD with a commit-graph. This
allows comparing the benefits we get from parsing commits from
the commit-graph and then again the benefits we get by
restricting the set of commits we walk.
Test: git rev-list --topo-order -100 HEAD
HEAD~1, no commit-graph: 6.80 s
HEAD~1, w/ commit-graph: 0.77 s
HEAD, w/ commit-graph: 0.02 s
Test: git rev-list --topo-order -100 HEAD -- tools
HEAD~1, no commit-graph: 9.63 s
HEAD~1, w/ commit-graph: 6.06 s
HEAD, w/ commit-graph: 0.06 s
This speedup is due to a few things. First, the new generation-
number-enabled algorithm walks commits on order of the number of
results output (subject to some branching structure expectations).
Since we limit to 100 results, we are running a query similar to
filling a single page of results. Second, when specifying a path,
we must parse the root tree object for each commit we walk. The
previous benefits from the commit-graph are entirely from reading
the commit-graph instead of parsing commits. Since we need to
parse trees for the same number of commits as before, we slow
down significantly from the non-path-based query.
For the test above, I specifically selected a path that is changed
frequently, including by merge commits. A less-frequently-changed
path (such as 'README') has similar end-to-end time since we need
to walk the same number of commits (before determining we do not
have 100 hits). However, get the benefit that the output is
presented to the user as it is discovered, much the same as a
normal 'git log' command (no '--topo-order'). This is an improved
user experience, even if the command has the same runtime.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few things that need to move around a little before
making a big refactoring in the topo-order logic:
1. We need access to record_author_date() and
compare_commits_by_author_date() in revision.c. These are used
currently by sort_in_topological_order() in commit.c.
2. Moving these methods to commit.h requires adding an author_date_slab
declaration to commit.h. Consumers will need their own implementation.
3. The add_parents_to_list() method in revision.c performs logic
around the UNINTERESTING flag and other special cases depending
on the struct rev_info. Allow this method to ignore a NULL 'list'
parameter, as we will not be populating the list for our walk.
Also rename the method to the slightly more generic name
process_parents() to make clear that this method does more than
add to a list (and no list is required anymore).
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'git rev-list --topo-order' and its kin, the topo_order
setting in struct rev_info implies the limited setting. This means
that the following things happen during prepare_revision_walk():
* revs->limited implies we run limit_list() to walk the entire
reachable set. There are some short-cuts here, such as if we
perform a range query like 'git rev-list COMPARE..HEAD' and we
can stop limit_list() when all queued commits are uninteresting.
* revs->topo_order implies we run sort_in_topological_order(). See
the implementation of that method in commit.c. It implies that
the full set of commits to order is in the given commit_list.
These two methods imply that a 'git rev-list --topo-order HEAD'
command must walk the entire reachable set of commits _twice_ before
returning a single result.
If we have a commit-graph file with generation numbers computed, then
there is a better way. This patch introduces some necessary logic
redirection when we are in this situation.
In v2.18.0, the commit-graph file contains zero-valued bytes in the
positions where the generation number is stored in v2.19.0 and later.
Thus, we use generation_numbers_enabled() to check if the commit-graph
is available and has non-zero generation numbers.
When setting revs->limited only because revs->topo_order is true,
only do so if generation numbers are not available. There is no
reason to use the new logic as it will behave similarly when all
generation numbers are INFINITY or ZERO.
In prepare_revision_walk(), if we have revs->topo_order but not
revs->limited, then we trigger the new logic. It breaks the logic
into three pieces, to fit with the existing framework:
1. init_topo_walk() fills a new struct topo_walk_info in the rev_info
struct. We use the presence of this struct as a signal to use the
new methods during our walk. In this patch, this method simply
calls limit_list() and sort_in_topological_order(). In the future,
this method will set up a new data structure to perform that logic
in-line.
2. next_topo_commit() provides get_revision_1() with the next topo-
ordered commit in the list. Currently, this simply pops the commit
from revs->commits.
3. expand_topo_walk() provides get_revision_1() with a way to signal
walking beyond the latest commit. Currently, this calls
add_parents_to_list() exactly like the old logic.
While this commit presents method redirection for performing the
exact same logic as before, it allows the next commit to focus only
on the new logic.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "rev-list --filter" feature learned to exclude all trees via
"tree:0" filter.
* md/filter-trees:
list-objects: support for skipping tree traversal
filter-trees: code clean-up of tests
list-objects-filter: implement filter tree:0
list-objects-filter-options: do not over-strbuf_init
list-objects-filter: use BUG rather than die
revision: mark non-user-given objects instead
rev-list: handle missing tree objects properly
list-objects: always parse trees gently
list-objects: refactor to process_tree_contents
list-objects: store common func args in struct
The --exclude-promisor-objects option causes some funny behavior in at
least two commands: log and blame. It causes a BUG crash:
$ git log --exclude-promisor-objects
BUG: revision.c:2143: exclude_promisor_objects can only be used
when fetch_if_missing is 0
Aborted
[134]
Fix this such that the option is treated like any other unknown option.
The commands that must support it are limited, so declare in those
commands that the flag is supported. In particular:
pack-objects
prune
rev-list
The commands were found by searching for logic which parses
--exclude-promisor-objects outside of revision.c. Extra logic outside of
revision.c is needed because fetch_if_missing must be turned on before
revision.c sees the option or it will BUG-crash. The above list is
supported by the fact that no other command is introspectively invoked
by another command passing --exclude-promisor-object.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make use of the new ref aliases to pass refs from another worktree
around and access them from the current ref store instead. This does
not change any functionality, but when a problem arises, we would like
the reported messages to mention full ref aliases, like this:
fatal: bad object worktrees/ztemp/HEAD
warning: reflog of 'main-worktree/HEAD' references pruned commits
instead of
fatal: bad object HEAD
warning: reflog of 'HEAD' references pruned commits
which does not really tell where the refs are from.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is a callback of for_each_reflog() which will pass a ref
name as the first argument, not a path (to a reflog file).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
Currently, list-objects.c incorrectly treats all root trees of commits
as USER_GIVEN. Also, it would be easier to mark objects that are
non-user-given instead of user-given, since the places in the code
where we access an object through a reference are more obvious than
the places where we access an object that was given by the user.
Resolve these two problems by introducing a flag NOT_USER_GIVEN that
marks blobs and trees that are non-user-given, replacing USER_GIVEN.
(Only blobs and trees are marked because this mark is only used when
filtering objects, and filtering of other types of objects is not
supported yet.)
This fixes a bug in that git rev-list behaved differently from git
pack-objects. pack-objects would *not* filter objects given explicitly
on the command line and rev-list would filter. This was because the two
commands used a different function to add objects to the rev_info
struct. This seems to have been an oversight, and pack-objects has the
correct behavior, so I added a test to make sure that rev-list now
behaves properly.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new variant repo_diff_setup() is added that takes 'struct repository *'
and diff_setup() becomes a thin macro around it that is protected by
NO_THE_REPOSITORY_COMPATIBILITY_MACROS, similar to NO_THE_INDEX_....
The plan is these macros will always be defined for all library files
and the macros are only accessible in builtin/
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.
* jk/cocci:
show_dirstat: simplify same-content check
read-cache: use oideq() in ce_compare functions
convert hashmap comparison functions to oideq()
convert "hashcmp() != 0" to "!hasheq()"
convert "oidcmp() != 0" to "!oideq()"
convert "hashcmp() == 0" to hasheq()
convert "oidcmp() == 0" to oideq()
introduce hasheq() and oideq()
coccinelle: use <...> for function exclusion
The code for computing history reachability has been shuffled,
obtained a bunch of new tests to cover them, and then being
improved.
* ds/reachable:
commit-reach: correct accidental #include of C file
commit-reach: use can_all_from_reach
commit-reach: make can_all_from_reach... linear
commit-reach: replace ref_newer logic
test-reach: test commit_contains
test-reach: test can_all_from_reach_with_flags
test-reach: test reduce_heads
test-reach: test get_merge_bases_many
test-reach: test is_descendant_of
test-reach: test in_merge_bases
test-reach: create new test tool for ref_newer
commit-reach: move can_all_from_reach_with_flags
upload-pack: generalize commit date cutoff
upload-pack: refactor ok_to_give_up()
upload-pack: make reachable() more generic
commit-reach: move commit_contains from ref-filter
commit-reach: move ref_newer from remote.c
commit.h: remove method declarations
commit-reach: move walk methods from commit.c
"git rev-list --stdin </dev/null" used to be an error; it now shows
no output without an error. "git rev-list --stdin --default HEAD"
still falls back to the given default when nothing is given on the
standard input.
* jk/rev-list-stdin-noop-is-ok:
rev-list: make empty --stdin not an error
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we originally did the series that contains 7ba826290a
(revision: add rev_input_given flag, 2017-08-02) the intent
was that "git rev-list --stdin </dev/null" would similarly
become a successful noop. However, an attempt at the time to
do that did not work[1]. The problem is that rev_input_given
serves two roles:
- it tells rev-list.c that it should not error out
- it tells revision.c that it should not have the "default"
ref kick (e.g., "HEAD" in "git log")
We want to trigger the former, but not the latter. This is
technically possible with a single flag, if we set the flag
only after revision.c's revs->def check. But this introduces
a rather subtle ordering dependency.
Instead, let's keep two flags: one to denote when we got
actual input (which triggers both roles) and one for when we
read stdin (which triggers only the first).
This does mean a caller interested in the first role has to
check both flags, but there's only one such caller. And any
future callers might want to make the distinction anyway
(e.g., if they care less about erroring out, and more about
whether revision.c soaked up our stdin).
In fact, we already keep such a flag internally in
revision.c for this purpose, so this is really just exposing
that to the caller (and the old function-local flag can go
away in favor of our new one).
[1] https://public-inbox.org/git/20170802223416.gwiezhbuxbdmbjzx@sigill.intra.peff.net/
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the match_patchspec API and friends take an index_state instead
of assuming the_index in dir.c. All external call sites are converted
blindly to keep the patch simple and retain current behavior.
Individual call sites may receive further updates to use the right
index instead of the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The lazy clone support had a few places where missing but promised
objects were not correctly tolerated, which have been fixed.
* jt/tags-to-promised-blobs-fix:
tag: don't warn if target is missing but promised
revision: tolerate promised targets of tags
Partial clone support of "git clone" has been updated to correctly
validate the objects it receives from the other side. The server
side has been corrected to send objects that are directly
requested, even if they may match the filtering criteria (e.g. when
doing a "lazy blob" partial clone).
* jt/partial-clone-fsck-connectivity:
clone: check connectivity even if clone is partial
upload-pack: send refs' objects despite "filter"
These methods are now declared in commit-reach.h. Remove them from
commit.h and add new include statements in all files that require these
declarations.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
In handle_commit(), it is fatal for an annotated tag to point to a
non-existent object. --exclude-promisor-objects should relax this rule
and allow non-existent objects that are promisor objects, but this is
not the case. Update handle_commit() to tolerate this situation.
This was observed when cloning from a repository with an annotated tag
pointing to a blob. The test included in this patch demonstrates this
case.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A filter line in a request to upload-pack filters out objects regardless
of whether they are directly referenced by a "want" line or not. This
means that cloning with "--filter=blob:none" (or another filter that
excludes blobs) from a repository with at least one ref pointing to a
blob (for example, the Git repository itself) results in output like the
following:
error: missing object referenced by 'refs/tags/junio-gpg-pub'
and if that particular blob is not referenced by a fetched tree, the
resulting clone fails fsck because there is no object from the remote to
vouch that the missing object is a promisor object.
Update both the protocol and the upload-pack implementation to include
all explicitly specified "want" objects in the packfile regardless of
the filter specification.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_commit_reference
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of lookup_tree
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of lookup_blob
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of parse_object
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The in-core "commit" object had an all-purpose "void *util" field,
which was tricky to use especially in library-ish part of the
code. All of the existing uses of the field has been migrated to a
more dedicated "commit-slab" mechanism and the field is eliminated.
* nd/commit-util-to-slab:
commit.h: delete 'util' field in struct commit
merge: use commit-slab in merge remote desc instead of commit->util
log: use commit-slab in prepare_bases() instead of commit->util
show-branch: note about its object flags usage
show-branch: use commit-slab for commit-name instead of commit->util
name-rev: use commit-slab for rev-name instead of commit->util
bisect.c: use commit-slab for commit weight instead of commit->util
revision.c: use commit-slab for show_source
sequencer.c: use commit-slab to associate todo items to commits
sequencer.c: use commit-slab to mark seen commits
shallow.c: use commit-slab for commit depth instead of commit->util
describe: use commit-slab for commit names instead of commit->util
blame: use commit-slab for blame suspects instead of commit->util
commit-slab: support shared commit-slab
commit-slab.h: code split
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (42 commits)
merge-one-file: compute empty blob object ID
add--interactive: compute the empty tree value
Update shell scripts to compute empty tree object ID
sha1_file: only expose empty object constants through git_hash_algo
dir: use the_hash_algo for empty blob object ID
sequencer: use the_hash_algo for empty tree object ID
cache-tree: use is_empty_tree_oid
sha1_file: convert cached object code to struct object_id
builtin/reset: convert use of EMPTY_TREE_SHA1_BIN
builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX
wt-status: convert two uses of EMPTY_TREE_SHA1_HEX
submodule: convert several uses of EMPTY_TREE_SHA1_HEX
sequencer: convert one use of EMPTY_TREE_SHA1_HEX
merge: convert empty tree constant to the_hash_algo
builtin/merge: switch tree functions to use object_id
builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo
sha1-file: add functions for hex empty tree and blob OIDs
builtin/receive-pack: avoid hard-coded constants for push certs
diff: specify abbreviation size in terms of the_hash_algo
upload-pack: replace use of several hard-coded constants
...
Code clean-up to turn history traversal more robust in a
semi-corrupt repository.
* jk/unavailable-can-be-missing:
mark_parents_uninteresting(): avoid most allocation
mark_parents_uninteresting(): replace list with stack
mark_parents_uninteresting(): drop missing object check
mark_tree_contents_uninteresting(): drop missing object check
Developer support update, by using BUG() macro instead of die() to
mark codepaths that should not happen more clearly.
* js/use-bug-macro:
BUG_exit_code: fix sparse "symbol not declared" warning
Convert remaining die*(BUG) messages
Replace all die("BUG: ...") calls by BUG() ones
run-command: use BUG() to report bugs, not die()
test-tool: help verifying BUG() code paths
The code has been taught to use the duplicated information stored
in the commit-graph file to learn the tree object name for a commit
to avoid opening and parsing the commit object when it makes sense
to do so.
* ds/lazy-load-trees:
coccinelle: avoid wrong transformation suggestions from commit.cocci
commit-graph: lazy-load trees for commits
treewide: replace maybe_tree with accessor methods
commit: create get_commit_tree() method
treewide: rename tree to maybe_tree
Garima Singh
Junio C Hamano
Denton Liu
Mike Hommey
Eric Wong
René Scharfe
Jeff King
Ævar Arnfjörð Bjarmason
Derrick Stolee
Elijah Newren
Derrick Stolee
brian m. carlson
Nguyễn Thái Ngọc Duy
Jonathan Tan
Matthew DeVore
Stefan Beller