Unless one already knew, it was not obvious what sort of shorthand
"git check-ref-format --branch" expands. Explain it.
The --branch argument is not optional.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When saying the initial branch is equal to the currently active
remote branch, it is probably intended that the branch heads
point to the same commit. Maybe it would be more useful to a
new user to emphasize that the tree contents and history are the
same.
More important, probably, is that this new branch is set up so
that "git pull" merges changes from the corresponding remote
branch. The next paragraph addresses that directly. What the
reader needs to know to begin with is that (1) the initial branch
is your own; if you do not pull, it won't get updated, and that
(2) the initial branch starts out at the same commit as the
upstream.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Idealists may want USE_NSEC to be the default on Linux some day.
Point to a patch to better explain the requirements on
filesystem code for that to happen.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not necessarily obvious to a git novice what it means for a
filesystem tree to be equal to the HEAD. Spell it out.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation seems to assume that the starting point for a new
branch is the tip of an existing (ordinary) branch, but that is not
the most common case. More often, "git branch" is used to begin
a branch from a remote-tracking branch, a tag, or an interesting
commit (e.g. origin/pu^2). Clarify the language so it can apply
to these cases. Thanks to Sean Estabrooks for the wording.
Also add a pointer to the user's manual for the bewildered.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the documentation for --merged and --no-merged to explain
the meaning of the optional parameter introduced in commit 049716b
(branch --merged/--no-merged: allow specifying arbitrary commit,
2008-07-08).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sounds better this way, at least to my ears. ("The syntax and
supported options of git merge" is a plural noun. "the same"
instead of "equal" sounds less technical and seems to convey
the meaning better here.)
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fmt-merge-message builtin can be invoked as "git fmt-merge-msg" rather
than through the hard link in GIT_EXEC_PATH. Although this is unlikely to
confuse most script writers, it should not hurt to make the documentation
a little clearer anyway.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it easier to edit just the commit message for a commit
using 'git rebase -i' by introducing the "reword" command.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the "pretty" machinery to expand '%+x' to a LF followed by
the expansion of '%x' if and only if '%x' expands to a non-empty string,
and to remove LFs before '%-x' if '%x' expands to an empty string. This
works for any supported expansion placeholder 'x'.
This is expected to be immediately useful to reproduce the commit log
message with "%s%+b%n"; "%s%n%b%n" adds one extra LF if the log message is
a one-liner.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate some english words to portuguese and fix some
typos on translation.
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
The default --aggressive window has been 250 since 1c192f34 "gc
--aggressive: make it really aggressive", released in git v1.6.3.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A sample "git describe -h" did not match what the program actually says.
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When <path> is not given, use the "humanish" part of the source repository
instead.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jc/maint-1.6.0-blank-at-eof' (early part):
diff --whitespace: fix blank lines at end
core.whitespace: split trailing-space into blank-at-{eol,eof}
diff --color: color blank-at-eof
diff --whitespace=warn/error: fix blank-at-eof check
diff --whitespace=warn/error: obey blank-at-eof
diff.c: the builtin_diff() deals with only two-file comparison
apply --whitespace: warn blank but not necessarily empty lines at EOF
apply --whitespace=warn/error: diagnose blank at EOF
apply.c: split check_whitespace() into two
apply --whitespace=fix: detect new blank lines at eof correctly
apply --whitespace=fix: fix handling of blank lines at the eof
A command line
$ git archive -o my-v2.0.zip v2.0
almost certainly wants the output in zip format, even though it does not
specify any --format option.
When --format is not given, but output filename is, try to infer what
format is requested from the filename extension. Currently this code only
knows about '.zip'. When the format is unspecified and the filename does
not tell us, the output will be in 'tar' format as before.
Of course, an explicit --format will not trigger this guesswork.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '-o' option is commonly used in many tools to specify the output file.
Typing '--output' every time is a bit too long to be a practical alternative
to redirecting output. But specifying the output name has the advantage of
making possible to guess the desired output format by filename extension.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-push is not currently using -n for anything else, and it seems
unlikely we will want to use it to mean anything else in the future,
so add it as an alias for convenience.
Signed-off-by: Nelson Elhage <nelhage@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
60c2993 (Documentation/git-commit.txt: describe --dry-run, 2009-08-15)
wanted to update the documentation to say that "git status" is not the
same as "git commit --dry-run" anymore, but it screwed up and also added
the description of --dry-run that was already present.
Noticed by Johannes Gilger.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/vcs-helper:
Makefile: remove remnant of separate http/https/ftp helpers
Use a clearer style to issue commands to remote helpers
Make the "traditionally-supported" URLs a special case
Makefile: install hardlinks for git-remote-<scheme> supported by libcurl if possible
Makefile: do not link three copies of git-remote-* programs
Makefile: git-http-fetch does not need expat
http-fetch: Fix Makefile dependancies
Add transport native helper executables to .gitignore
git-http-fetch: not a builtin
Use an external program to implement fetching with curl
Add support for external programs for handling native fetches
These messages are nice for new users, but experienced git
users know how to manipulate the index, and these messages
waste a lot of screen real estate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This message is designed to help new users understand what
has happened when refs fail to push. However, it does not
help experienced users at all, and significantly clutters
the output, frequently dwarfing the regular status table and
making it harder to see.
This patch introduces a general configuration mechanism for
optional messages, with this push message as the first
example.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This configuration option allows systematically rewriting fetch-only URLs
to push-capable URLs when used with push. For instance:
[url "ssh://example.org/"]
pushInsteadOf = "git://example.org/"
This will allow clones of "git://example.org/path/to/repo" to subsequently
push to "ssh://example.org/path/to/repo", without manually configuring
pushurl for that remote.
Includes documentation for the new option, bash completion updates, and
test cases (both that pushInsteadOf applies to push, that it does not
apply to fetch, and that it is ignored when pushURL is already defined).
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-pull.txt includes fetch-options.txt and merge-options.txt, both of
which document the --quiet and --verbose.
Supress the ones from fetch-options.txt.
Signed-off-by: Emmanuel Trillaud <etrillaud@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All hooks are currently in its own section. Which may confuse users,
because the section name serves as the hook file name and sections are
all caps for man pages. Putting them into a new HOOKS section and each
hook into a subsection keeps the case to lower case.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/mailinfo-scissors:
mailinfo.scissors: new configuration
am/mailinfo: Disable scissors processing by default
Documentation: describe the scissors mark support of "git am"
Teach mailinfo to ignore everything before -- >8 -- mark
builtin-mailinfo.c: fix confusing internal API to mailinfo()
* tr/reset-checkout-patch:
stash: simplify defaulting to "save" and reject unknown options
Make test case number unique
tests: disable interactive hunk selection tests if perl is not available
DWIM 'git stash save -p' for 'git stash -p'
Implement 'git stash save --patch'
Implement 'git checkout --patch'
Implement 'git reset --patch'
builtin-add: refactor the meat of interactive_add()
Add a small patch-mode testing library
git-apply--interactive: Refactor patch mode code
Make 'git stash -k' a short form for 'git stash save --keep-index'
People who configured trailing-space depended on it to catch both extra
white space at the end of line, and extra blank lines at the end of file.
Earlier attempt to introduce only blank-at-eof gave them an escape hatch
to keep the old behaviour, but it is a regression until they explicitly
specify the new error class.
This introduces a blank-at-eol that only catches extra white space at the
end of line, and makes the traditional trailing-space a convenient synonym
to catch both blank-at-eol and blank-at-eof. This way, people who used
trailing-space continue to catch both classes of errors.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" strips new blank lines at EOF under --whitespace=fix option,
but neigher --whitespace=warn nor --whitespace=error paid any attention to
these errors.
Introduce a new whitespace error class, blank-at-eof, to make the
whitespace error handling more consistent.
The patch adds a new "linenr" field to the struct fragment in order to
record which line the hunk started in the input file, but this is needed
solely for reporting purposes. The detection of this class of whitespace
errors cannot be done while parsing a patch like we do for all the other
classes of whitespace errors. It instead has to wait until we find where
to apply the hunk, but at that point, we do not have an access to the
original line number in the input file anymore, hence the new field.
Depending on your point of view, this may be a bugfix that makes warn and
error in line with fix. Or you could call it a new feature. The line
between them is somewhat fuzzy in this case.
Strictly speaking, triggering more errors than before is a change in
behaviour that is not backward compatible, even though the reason for the
change is because the code was not checking for an error that it should
have. People who do not want added blank lines at EOF to trigger an error
can disable the new error class.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.3:
git-clone: add missing comma in --reference documentation
git-cvsserver: no longer use deprecated 'git-subcommand' commands
clone: disconnect transport after fetching
With the earlier DWIM patches, certain combination of options defaulted
to the "save" command correctly while certain equally valid combination
did not. For example, "git stash -k" were Ok but "git stash -q -k" did
not work.
This makes the logic of defaulting to "save" much simpler. If there are no
non-flag arguments, it is clear that there is no command word, and we
default to "save" subcommand. This rule prevents "git stash -q apply"
from quietly creating a stash with "apply" as the message.
This also teaches "git stash save" to reject an unknown option. This is
to keep a mistyped "git stash save --quite" from creating a stash with a
message "--quite", and this safety is more important with the new logic
to default to "save" with any option-looking argument without an explicit
comand word.
[jc: this is based on Matthieu's 3-patch series, and a follow-up
discussion, and he and Peff take all the credit; if I have introduced bugs
while reworking, they are mine.]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git branch, checkout, clean, mv and tag all have an option -f to override
certain checks. This patch makes them accept the long option --force as
a synonym.
While we're at it, document that checkout support --quiet as synonym for
its short option -q.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A request to clone the repository does not give any "have" but asks for
all the refs we offer with "want". When a request does not ask to clone
the repository fully, but asks to fetch some refs into an empty
repository, it will not give any "have" but its "want" won't ask for all
the refs we offer.
If we suppose (and I would say this is a rather big if) that it makes
sense to distinguish these two cases, a hook cannot reliably do this
alone. The hook can detect lack of "have" and bunch of "want", but there
is no direct way to tell if the other end asked for all refs we offered,
or merely most of them.
Between the time we talked with the other end and the time the hook got
called, we may have acquired more refs or lost some refs in the repository
by concurrent operations. Given that we plan to introduce selective
advertisement of refs with a protocol extension, it would become even more
difficult for hooks to guess between these two cases.
This adds "kind [clone|fetch]" to hook's input, as a stable interface to
allow the hooks to tell these cases apart.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After upload-pack successfully finishes its operation, post-upload-pack
hook can be called for logging purposes.
The hook is passed various pieces of information, one per line, from its
standard input. Currently the following items can be fed to the hook, but
more types of information may be added in the future:
want SHA-1::
40-byte hexadecimal object name the client asked to include in the
resulting pack. Can occur one or more times in the input.
have SHA-1::
40-byte hexadecimal object name the client asked to exclude from
the resulting pack, claiming to have them already. Can occur zero
or more times in the input.
time float::
Number of seconds spent for creating the packfile.
size decimal::
Size of the resulting packfile in bytes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/shortstatus:
git commit --dry-run -v: show diff in color when asked
Documentation/git-commit.txt: describe --dry-run
wt-status: collect untracked files in a separate "collect" phase
Make git_status_config() file scope static to builtin-commit.c
wt-status: move wt_status_colors[] into wt_status structure
wt-status: move many global settings to wt_status structure
commit: --dry-run
status: show worktree status of conflicted paths separately
wt-status.c: rework the way changes to the index and work tree are summarized
diff-index: keep the original index intact
diff-index: report unmerged new entries
* maint:
Fix overridable written with an extra 'e'
Documentation: git-archive: mark --format as optional in summary
Round-down years in "years+months" relative date view
* maint-1.6.3:
Fix overridable written with an extra 'e'
Documentation: git-archive: mark --format as optional in summary
Round-down years in "years+months" relative date view
* maint-1.6.2:
Fix overridable written with an extra 'e'
Documentation: git-archive: mark --format as optional in summary
Round-down years in "years+months" relative date view
Conflicts:
Documentation/git-archive.txt
The --format option was made optional in 8ff21b1 (git-archive: make
tar the default format, 2007-04-09), but it was not marked as optional
in the summary. This trival patch just changes the summary to match
the rest of the documentation.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/submodule-foreach:
git clone: Add --recursive to automatically checkout (nested) submodules
t7407: Use 'rev-parse --short' rather than bash's substring expansion notation
git submodule status: Add --recursive to recurse into nested submodules
git submodule update: Introduce --recursive to update nested submodules
git submodule foreach: Add --recursive to recurse into nested submodules
git submodule foreach: test access to submodule name as '$name'
Add selftest for 'git submodule foreach'
git submodule: Cleanup usage string and add option parsing to cmd_foreach()
git submodule foreach: Provide access to submodule name, as '$name'
Conflicts:
Documentation/git-submodule.txt
git-submodule.sh
Describe what a scissors mark looks like, and explain in what situation
it is often used.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently point the HEAD of a newly cloned repo to the
same ref as the parent repo's HEAD. While a user can then
"git checkout -b foo origin/foo" whichever branch they
choose, it is more convenient and more efficient to tell
clone which branch you want in the first place.
Based on a patch by Kirill A. Korinskiy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-log: allow --decorate[=short|full]
Minor improvement to the write-tree documentation
git-bisect: call the found commit "*the* first bad commit"
Commit de435ac0 changed the behavior of --decorate from printing the
full ref (e.g., "refs/heads/master") to a shorter, more human-readable
version (e.g., just "master"). While this is nice for human readers,
external tools using the output from "git log" may prefer the full
version.
This patch introduces an extension to --decorate to allow the caller to
specify either the short or the full versions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the <name> placeholder to <tagname> in the SYNOPSIS section of
git-tag documentation, and describe it in the OPTIONS section in a way
similar to how documentation for git-branch does.
Add SEE ALSO section to list the other documentation pages these two pages
refer to.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mongoose (http://code.google.com/p/mongoose/) is a lightweight web
server. It's just a single binary so it's a lot simpler to configure and
install.
Signed-off-by: Wilhansen Li <wil@nohakostudios.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/replace:
t6050: check pushing something based on a replaced commit
Documentation: add documentation for "git replace"
Add git-replace to .gitignore
builtin-replace: use "usage_msg_opt" to give better error messages
parse-options: add new function "usage_msg_opt"
builtin-replace: teach "git replace" to actually replace
Add new "git replace" command
environment: add global variable to disable replacement
mktag: call "check_sha1_signature" with the replacement sha1
replace_object: add a test case
object: call "check_sha1_signature" with the replacement sha1
sha1_file: add a "read_sha1_file_repl" function
replace_object: add mechanism to replace objects found in "refs/replace/"
refs: add a "for_each_replace_ref" function
Many projects using submodules expect all submodules to be checked out
in order to build/work correctly. A common command sequence for
developers on such projects is:
git clone url/to/project
cd project
git submodule update --init (--recursive)
This patch introduces the --recursive option to git-clone. The new
option causes git-clone to recursively clone and checkout all
submodules of the cloned project. Hence, the above command sequence
can be reduced to:
git clone --recursive url/to/project
--recursive is ignored if no checkout is done by the git-clone.
The patch also includes documentation and a selftest.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only show
status for all the submodules in the current repo (which is what is
currently done by 'git submodule status'), but also to show status for
all submodules at all levels (i.e. recursing into nested submodules as
well).
This patch teaches the new --recursive option to the 'git submodule status'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only update
the submodules in the current repo (which is what is currently done by
'git submodule update'), but also to operate on all submodules at all
levels (i.e. recursing into nested submodules as well).
This patch teaches the new --recursive option to the 'git submodule update'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only operate
on all the submodules in the current repo (which is what is currently done
by 'git submodule foreach'), but also to operate on all submodules at all
levels (i.e. recursing into nested submodules as well).
This patch teaches the new --recursive option to the 'git submodule foreach'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The note about interoperating in different timezones and such is about
localtime argument, not parent.
Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
* maint:
filter-branch: make the usage string fit on 80 chars terminals.
filter-branch: add an example how to add ACKs to a range of commits
docs: describe impact of repack on "clone -s"
Commit de435ac0 changed the behavior of --decorate from printing the
full ref (e.g., "refs/heads/master") to a shorter, more human-readable
version (e.g., just "master"). While this is nice for human readers,
external tools using the output from "git log" may prefer the full
version.
This patch introduces an extension to --decorate to allow the caller to
specify either the short or the full versions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The argument to 'git submodule foreach' already has access to the variables
'$path' (the path to the submodule, relative to the superproject) and '$sha1'
(the submodule commit recorded by the superproject).
This patch adds another variable -- '$name' -- which contains the name of the
submodule, as recorded in the superproject's .gitmodules file.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have to add certain lines like ACKs (or for that matter,
Signed-off-by:s) to a range of commits starting with HEAD, you might
be tempted to use 'git rebase -i -10', but that is a waste of your
time.
It is better to use 'git filter-branch' with an appropriate message
filter, and this commit adds an example how to do so to
filter-branch's man page.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The effects of repacking on a repository with alternates are a bit
subtle. The two main things users will want are:
1. Not to waste disk space by accidentally copying objects which could
be shared.
2. Copying all objects explicitly to break the dependency on the source
repo.
This patch describes both under the "clone -s" documentation. It makes
sense to put it there rather than in git-repack.txt for both cases.
For (1), we are warning the user who is using "clone -s" about what _not_
to do, so we need to get their attention when reading about "clone -s".
For (2), we are telling them how git-repack can be used to accomplish a
task, but until they know that git-repack is the right tool, they have no
reason to look at the repack documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a hunk-based mode to git-stash. You can select hunks from
the difference between HEAD and worktree, and git-stash will build a
stash that reflects these changes. The index state of the stash is
the same as your current index, and we also let --patch imply
--keep-index.
Note that because the selected hunks are rolled back from the worktree
but not the index, the resulting state may appear somewhat confusing
if you had also staged these changes. This is not entirely
satisfactory, but due to the way stashes are applied, other solutions
would require a change to the stash format.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a --patch mode for git-checkout. In the index usage
git checkout --patch -- [files...]
it lets the user discard edits from the <files> at the granularity of
hunks (by selecting hunks from 'git diff' and then reverse applying
them to the worktree).
We also accept a revision argument. In the case
git checkout --patch HEAD -- [files...]
we offer hunks from the difference between HEAD and the worktree, and
reverse applies them to both index and worktree, allowing you to
discard staged changes completely. In the non-HEAD usage
git checkout --patch <revision> -- [files...]
it offers hunks from the difference between the worktree and
<revision>. The chosen hunks are then applied to both index and
worktree.
The application to worktree and index is done "atomically" in the
sense that we first check if the patch applies to the index (it should
always apply to the worktree). If it does not, we give the user a
choice to either abort or apply to the worktree anyway.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a --patch mode for git-reset. The basic case is
git reset --patch -- [files...]
which acts as the opposite of 'git add --patch -- [files...]': it
offers hunks for *un*staging. Advanced usage is
git reset --patch <revision> -- [files...]
which offers hunks from the diff between the index and <revision> for
forward application to the index. (That is, the basic case is just
<revision> = HEAD.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git submodule summary is providing similar functionality for submodules as
git diff-index does for a git project (including the meaning of --cached).
But the analogon to git diff-files is missing, so add a --files option to
summarize the differences between the index of the super project and the
last commit checked out in the working tree of the submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
push: point to 'git pull' and 'git push --force' in case of non-fast forward
Documentation: add: <filepattern>... is optional
Change mentions of "git programs" to "git commands"
Documentation: merge: one <remote> is required
help.c: give correct structure's size to memset()
* maint-1.6.3:
Change mentions of "git programs" to "git commands"
Documentation: merge: one <remote> is required
help.c: give correct structure's size to memset()
'git push' failing because of non-fast forward is a very common situation,
and a beginner does not necessarily understand "fast forward" immediately.
Add a new section to the git-push documentation and refer them to it.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
<filepattern>... is optional (e.g. when the --all or --update
options are used) so use square brackets in the synopsis.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the docs and printouts refer to "commands" when discussing what
the end users call via the "git" top-level program. We should refer them
as "git programs" when we discuss the fact that the commands are
implemented as separate programs, but in other contexts, it is better to
use the term "git commands" consistently.
Signed-off-by: Ori Avtalion <ori@avtalion.name>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge only requires one <remote>, so "<remote>..." should be used in the
synopsis (and not "<remote> <remote>...").
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/run-command-updates:
api-run-command.txt: describe error behavior of run_command functions
run-command.c: squelch a "use before assignment" warning
receive-pack: remove unnecessary run_status report
run_command: report failure to execute the program, but optionally don't
run_command: encode deadly signal number in the return value
run_command: report system call errors instead of returning error codes
run_command: return exit code as positive value
MinGW: simplify waitpid() emulation macros
Add an example to the stash documentation that shows how to quickly
find candidate commits among the 'git fsck --unreachable' output.
Unless you have merges of branch names containing WIP, or edit your
merge messages to say WIP, there will be no false positives.
Snippet written by Björn "doener" Steinbrink and me after zepolen_
asked on IRC.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches --dry-run option to "git commit".
It is the same as "git status", but in the longer term we would want to
change the semantics of "git status" not to be the preview of commit, and
this is the first step for doing so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When this option is given, the command does not verify the pack contents,
but shows the delta chain histogram. If used with --verbose, the usual
list of objects is also shown.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint: (95 commits)
verify-pack -v: do not report "chain length 0"
t5510: harden the way verify-pack is used
gitweb/README: Document $base_url
Documentation: git submodule: add missing options to synopsis
Better usage string for reflog.
hg-to-git: don't import the unused popen2 module
send-email: remove debug trace
config: Keep inner whitespace verbatim
GIT 1.6.4
GIT 1.6.3.4
config.txt: document add.ignore-errors
request-pull: allow ls-remote to notice remote.$nickname.uploadpack
Update the documentation of the raw diff output format
git-rerere.txt: Clarify ambiguity of the config variable
t9143: do not fail if Compress::Zlib is missing
Trivial path quoting fixes in git-instaweb
GIT 1.6.4-rc3
Documentation/config.txt: a variable can be defined on the section header line
git svn: make minimize URL more reliable over http(s)
Disable asciidoc 8.4.1+ semantics for `{plus}` and friends
...
Explain briefly what characters are prohibited in tag <name>
and point to git-check-ref-format(1) manual page for
further information.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If one thinks of a revision as the set of commits which can be reached
from the rev, and of ^rev as the complement, then multiple arguments to
git rev-list can be neither understood as the intersection nor the union
of the individual sets.
But set language is the natural as well as logical language in which to
phrase this. So, add a paragraph which explains multiple arguments using
set language.
Suggested-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I have 4GB of RAM on my system which should, in theory, be quite enough
to repack a 600 MB repository. However the unbounded delta cache size
always pushes it into swap, at which point everything virtually comes to
a halt. So unbounded caches are never a good idea.
A default of 256MB should be a good compromize between memory usage and
speed where medium sized repositories are still likely to fit in the
cache with a reasonable memory usage, and larger repositories are going
to take quite some time to repack already anyway.
While at it, clarify the associated config variable documentation
entries a bit.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/parse-options:
prune-packed: migrate to parse-options
verify-pack: migrate to parse-options
verify-tag: migrate to parse-options
write-tree: migrate to parse-options
The option --merge was missing for submodule update and --cached for
submodule summary.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce --ignore-whitespace option and corresponding config bool to
ignore whitespace differences while applying patches, akin to the
'patch' program.
'git am', 'git rebase' and the bash git completion are made aware of
this option.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
transport_get() can call transport_native_helper_init() to have list and
fetch-ref operations handled by running a separate program as:
git remote-<something> <remote> [<url>]
This program then accepts, on its stdin, "list" and "fetch <hex>
<name>" commands; the former prints out a list of available refs and
either their hashes or what they are symrefs to, while the latter
fetches them into the local object database and prints a newline when done.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the documentation suggests that 'git merge-base -a' and 'git
show-branch --merge-base' are equivalent (in fact it claims that the
former cannot handle more than two revs).
Alas, the handling of more than two revs is very different. Document
this by tests and correct the documentation to reflect this.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure that usage strings and documentation coincide with each other
and with the actual code.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With extra fixes from Thadeu and Carlos as well.
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Carlos R. Mafra <crmafra2@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current documentation states that servers typically listen on port
465 and calls this "ssmtp". While it's true that many mail servers use
port 465 for SSL smtp, this is non-standard, and hails from the days
before smtp and submission TLS support, that arrived in RFC2487 and
RFC3207. Port 465 is actually assigned by IANA for unrelated purposes,
and is mostly still used by mail servers today only to support Outlook
Express.
In any case, this patch helps the documentation better reflect both
standards and reality, while still helpfully mentioning ports numbers
that a user may wish to specify.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current documentation confuses non-standard SSL smtp port 465 with
submission port 587 (RFC 4406). This patch just changes the referenced
number.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git fast-export and git fast-import to rewrite the history
of a repository with large binary files, almost all of the time is
spent dealing with blobs. This is extremely inefficient if all we want
to do is rewrite the commits and tree structure. --no-data skips the
output of blobs and writes SHA-1s instead of marks, which provides a
massive speedup.
Signed-off-by: Geoffrey Irving <irving@naml.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To save me from the carpal tunnel syndrome, make 'git stash' accept
the short option '-k' instead of '--keep-index', and for even more
convenience, let's DWIM when this developer forgot to type the 'save'
command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, we remove leading [bracketed] [strings] from the Subject:
header when coming up with the summary of the patch. This is because
there are mailing lists etc that add their own headers to the subject, and
they know they can add things in brackets. The most obvious example is the
Linux kernel security list. Their emails look like
Subject: [Security] [patch] random: make get_random_int() more random
and other people mangle Subject: themselves in a similar way, e.g.:
Subject: [PATCH -rc] [BUGFIX] x86: fix kernel_trap_sp()
Subject: [BUGFIX][PATCH] fix bad page removal from LRU (Was Re: [RFC][PATCH] ..
even though "fix" is more than enough cue to mark it as a [BUGFIX].
Some projects however want to keep these bracketed strings. With this
option, we remove only [bracketed strings that contain word PATCH], so we
will turn things like these
[PATCH] [mailinfo] -b ...
[PATCH v2] [mailinfo] -b ...
[PATCH (v2) 1/4] [mailinfo] -b ...
into
[mailinfo] -b ...
This lacks tests and integration to the "git am" toolchain to be useful,
but it is a start.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have an embedded git work tree in your work tree (be it
an orphaned submodule, or an independent checkout of an unrelated
project), "git clean -d -f" blindly descended into it and removed
everything. This is rarely what the user wants.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next major release will be 1.6.5, hopefully with a shorter cycle
than the 1.6.4 cycle. After that in 1.7.0 we can make potentially
backward incompatible changes if necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the description of "--ignore-errors" from git-add.txt as
inspiration.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This includes mentioning the initial hash output of diff-tree, and
changes the header to "raw output format" which is more descriptive.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the less ambiguous
"set variable foo in order to enable bar"
rather than
"set variable foo to enable bar" which may trick users into
assuming that "enable" is a good value for "foo".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* en/fast-export:
fast-export: Document the fact that git-rev-list arguments are accepted
Add new fast-export testcases
fast-export: Add a --tag-of-filtered-object option for newly dangling tags
fast-export: Do parent rewriting to avoid dropping relevant commits
fast-export: Make sure we show actual ref names instead of "(null)"
fast-export: Omit tags that tag trees
fast-export: Set revs.topo_order before calling setup_revisions
* git://git.bogomips.org/git-svn:
git svn: make minimize URL more reliable over http(s)
git svn: avoid escaping '/' when renaming/copying files
t9142: stop httpd after the test
git svn: the branch command no longer needs the full path
git svn: revert default behavior for --minimize-url
git svn: add gc command
asciidoc 8.4.1 changed the semantics of inline backtick quoting so
that they disable parsing of inline constructs, i.e.,
Input: `{plus}`
Pre 8.4.1: +
Post 8.4.1: {plus}
Fix this by defining the asciidoc attribute 'no-inline-literal'
(which, per the 8.4.1 changelog, is the toggle to return to the old
behaviour) when under ASCIIDOC8.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts the --minimize-url behavior change that
appeared recently in commit 0b2af457a4
("Fix branch detection when repository root is inaccessible").
However, we now allow the option to be turned off by allowing
"--no-minimize-url" so people with limited-access setups can
still take advantage of the fix in
0b2af457a4.
Also document the behavior and default settings of minimize-url
in the manpage for the first time.
This introduces a temporary UI regression to allow t9141 to pass
that will be reverted (fixed) in the next commit.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Add a git svn gc command that gzips all unhandled.log files, and
removes all index files under .git/svn.
Signed-off-by: Robert Allan Zeh <robert.a.zeh@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
When starting a new repository, I see my students often say
% git init newrepo
and curse git. They could say
% mkdir newrepo; cd newrepo; git init
but allowing it as an obvious short-cut may be nicer.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-graft-unhide-true-parents:
git repack: keep commits hidden by a graft
Add a test showing that 'git repack' throws away grafted-away parents
Conflicts:
git-repack.sh
When you have grafts that pretend that a given commit has different
parents than the ones recorded in the commit object, it is dangerous
to let 'git repack' remove those hidden parents, as you can easily
remove the graft and end up with a broken repository.
So let's play it safe and keep those parent objects and everything
that is reachable by them, in addition to the grafted parents.
As this behavior can only be triggered by git pack-objects, and as that
command handles duplicate parents gracefully, we do not bother to cull
duplicated parents that may result by using both true and grafted
parents.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This hopefully makes the relationship between threading options of
format-patch and send-email easier to grasp.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also mention deprecated aliases that do not appear in the send-email
manpage.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is useful to grep directories non-recursively, e.g. when one wants to
look for all files in the toplevel directory, but not in any subdirectory,
or in Documentation/, but not in Documentation/technical/.
This patch adds support for --max-depth <depth> option to git-grep. If it is
given, git-grep descends at most <depth> levels of directories below paths
specified on the command line.
Note that if path specified on command line contains wildcards, this option
makes no sense, e.g.
$ git grep -l --max-depth 0 GNU -- 'contrib/*'
(note the quotes) will search all files in contrib/, even in
subdirectories, because '*' matches all files.
Documentation updates, bash-completion and simple test cases are also
provided.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add missing --bare to init-db synopsis.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add long options for dry run and quiet to be more consistent with the
rest of git.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPT__VERBOSE introduces the long option (--verbose) in addition to the
already present short option (-v), so document this new addition.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/grep-p:
grep: simplify -p output
grep -p: support user defined regular expressions
grep: add option -p/--show-function
grep: handle pre context lines on demand
grep: print context hunk marks between files
grep: move context hunk mark handling into show_line()
userdiff: add xdiff_clear_find_func()
- correctly link paragraphs within list items
- consistently format examples
- put option alernatives on separate lines
- always use [verse] for config items
- always indent 1st paragraph of a list item, with a tab
Signed-off-by: Yann Dirson <ydirson@altern.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also consistently use single quotes around git commands to make things clear
(was only needed at a couple of places).
Signed-off-by: Yann Dirson <ydirson@altern.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aliases that invoke shell commands start from the top-level directory,
but this was not documented.
Signed-off-by: Sitaram Chamarty <sitaramc@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/bisect:
Documentation: remove warning saying that "git bisect skip" may slow bisection
bisect: use a PRNG with a bias when skipping away from untestable commits
* sb/quiet-porcelains:
stash: teach quiet option
am, rebase: teach quiet option
submodule, repack: migrate to git-sh-setup's say()
git-sh-setup: introduce say() for quiet options
am: suppress apply errors when using 3-way
t4150: test applying with a newline in subject
Respect the userdiff attributes and config settings when looking for
lines with function definitions in git grep -p.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new option -p instructs git grep to print the previous function
definition as a context line, similar to diff -p. Such context lines
are marked with an equal sign instead of a dash. This option
complements the existing context options -A, -B, -C.
Function definitions are detected using the same heuristic that diff
uses. User defined regular expressions are not supported, yet.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
attr: plug minor memory leak
request-pull: really disable pager
Makes some cleanup/review in gittutorial
Makefile: git.o depends on library headers
git-submodule documentation: fix foreach example
There are some different but little cleanup changes to fix some missing
quotes, to fix what seemed to be an unended sentence, to reident a
little paragraph with too large a sentence and fix a branch name that
was referred to twice later by another name.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Backtick and apostrophe are asciidoc markup, so they should be escaped
in order to get the expected result in the rendered manual page.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --porcelain is used git-push will produce machine-readable output. The
output status line for each ref will be tab-separated and sent to stdout instead
of stderr. The full symbolic names of the refs will be given. For example
$ git push --dry-run --porcelain master :foobar 2>/dev/null \
| perl -pe 's/\t/ TAB /g'
= TAB refs/heads/master:refs/heads/master TAB [up to date]
- TAB :refs/heads/foobar TAB [deleted]
Signed-off-by: Larry D'Anna <larry@elder-gods.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cleanup the documentation to explicitly state that --exclude-directory
is only meaningful when used with -u. Also make the documentation more
consistent with the usage message printed with read-tree --help-all.
The -m, --prefix, --reset options are performing similar actions
(setting some flags, read_cache_unmerged(), checking for illegal option
combinations). Instead of performing these actions when the options are
parsed, we delay performing them until after parse-opts has finished.
The bit fields in struct unpack_trees_options have been promoted to full
unsigned ints. This is necessary to avoid "foo ? 1 : 0" constructs to
set these fields.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When providing a list of paths to limit what is exported, the object that
a tag points to can be filtered out entirely. This new switch allows
the user to specify what should happen to the tag in such a case. The
default action, 'abort' will exit with an error message. With 'drop', the
tag will simply be omitted from the output. With 'rewrite', if the object
tagged was a commit, the tag will be modified to tag an alternate commit.
The alternate commit is determined by treating the original commit as the
"parent" of the tag and then using the parent rewriting algorithm of the
revision traversal machinery (related to the "--parents" option of "git
rev-list")
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a command to unwind the effects of fetch by moving the rev_map
and refs/remotes/git-svn back to an old SVN revision. This allows
revisions to be re-fetched. Ideally SVN revs would be immutable,
but permissions changes in the SVN repository or indiscriminate use
of '--ignore-paths' can create situations where fetch cannot make
progress.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
'git svn dcommit' takes an optional revision argument, but the meaning
of it was rather scary. It completely ignored the current state of
the HEAD, only looking at the revisions between SVN and $rev. If HEAD
was attached to $branch, the branch lost all commits $rev..$branch in
the process.
Considering that 'git svn dcommit HEAD^' has the intuitive meaning
"dcommit all changes on my branch except the last one", we change the
meaning of the revision argument. git-svn temporarily checks out $rev
for its work, meaning that
* if a branch is specified, that branch (_not_ the HEAD) is rebased as
part of the dcommit,
* if some other revision is specified, as in the example, all work
happens on a detached HEAD and no branch is affected.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
Also make the docs more consistent with the usage message. While we're
here remove the zero initializers from the static variables as they're
unnecessary.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.2:
git-show-ref.txt: remove word and make consistent
git-svn documentation: fix typo in 'rebase vs. pull/merge' section
use xstrdup, not strdup in ll-merge.c
* maint-1.6.1:
git-show-ref.txt: remove word and make consistent
git-svn documentation: fix typo in 'rebase vs. pull/merge' section
use xstrdup, not strdup in ll-merge.c
* maint-1.6.0:
git-show-ref.txt: remove word and make consistent
git-svn documentation: fix typo in 'rebase vs. pull/merge' section
use xstrdup, not strdup in ll-merge.c
Under is better than in because of the nested nature of the .git
directory.
"also using" sounds a little odd, plus we say combined with later on so
just use that.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/pushurl:
avoid NULL dereference on failed malloc
builtin-remote: Make "remote -v" display push urls
builtin-remote: Show push urls as well
technical/api-remote: Describe new struct remote member pushurl
t5516: Check pushurl config setting
Allow push and fetch urls to be different
* sb/pull-rebase:
parse-remote: remove unused functions
parse-remote: support default reflist in get_remote_merge_branch
parse-remote: function to get the tracking branch to be merge
Teach stash pop, apply, save, and drop to be quiet when told. By using
the quiet option (-q), these actions will be silent unless errors are
encountered.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am and git-rebase are talkative scripts. Teach them to be quiet when
told, allowing them to speak only when they fail or experience errors.
The quiet option is maintained when git-am or git-rebase fails to apply
a patch. This means subsequent --resolved, --continue, --skip, --abort
invocations will be quiet if the original invocation was quiet.
Drop a handful of >&2 redirection; the rest of the program sends all the
info messages to stdout, not to stderr.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a configuration option, http.sslCertPasswordProtected, and associated
environment variable, GIT_SSL_CERT_PASSWORD_PROTECTED, to enable SSL client
certificate password prompt from within git. If this option is false and
if the environment variable does not exist, git falls back to OpenSSL's
prompts (as in earlier versions of git).
The environment variable may only be used to enable, not to disable
git's password prompt. This behavior mimics GIT_NO_VERIFY; the mere
existence of the variable is all that is checked.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on how your CVS->GIT conversion went you will have some
unexpanded CVS keywords in your GIT repo. If any of your git commits
touch these lines then the patch application will fail. This patch
addresses that by adding an option that will revert and expanded CVS
keywords to files in the working CVS directory that are affected by
the commit being applied.
Signed-off-by: Alex Bennée <alex@bennee.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For another patch series I'm working on I needed some tests
for the cc-cmd feature of git-send-email.
This patch adds 3 tests for the feature and for the possibility
to specify --suppress-cc multiple times, and fixes two bugs.
The first bug is that the --suppress-cc option for `cccmd' was
misspelled as `ccmd' in the code. The second bug, which is
actually found only with my other series, is that the argument
to the cccmd is never quoted, so the cccmd would fail with
patch file names containing a space.
A third bug I fix (in the docs) is that the bodycc argument was
actually spelled ccbody in the documentation and bash completion.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Cc: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/fix-send-email-threaded:
send-email: fix a typo in a comment
send-email: fix threaded mails without chain-reply-to
add a test for git-send-email for threaded mails without chain-reply-to
doc/send-email: clarify the behavior of --in-reply-to with --no-thread
send-email: fix non-threaded mails
add a test for git-send-email for non-threaded mails
Rewrite the gc section using unresolved and resolved instead of "not
recorded". Add plurals and missing articles. Make some sentences have
consistent tense. Try and be more active by removing "that" and
simplifying sentences.
The terms "hand-resolve" and "hand resolve" were used, so just use "hand
resolve" to be more consistent.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This warning was probably useless anyway, but it is even more so now
that filtering of skipped commits is done in C and that there is a
mechanism to skip away from broken commits.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/maint-fix-send-email-threaded:
doc/send-email: clarify the behavior of --in-reply-to with --no-thread
send-email: fix non-threaded mails
add a test for git-send-email for non-threaded mails
Conflicts:
git-send-email.perl
t/t9001-send-email.sh
Also remove the argument from --[no-]chain-reply-to.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-send-email docs do not mention except in the usage lines
the combined patch formatting/sending ability of git-send-email.
This patch expands on the possible arguments to git-send-email
and explains the meaning of the rev-list argument.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current text makes some users feel uneasy, worrying whether
'-a' could lead to corrupt repositories. Clarify that '-a'
may lead to performance issues only for dumb protocols.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Helped-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a config setting remote.$remotename.pushurl which is
used for pushes only. If absent remote.$remotename.url is used for
pushes and fetches as before.
This is useful, for example, in order to do passwordless fetches
(remote update) over the git transport but pushes over ssh.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git stash pop' supports the '--index' option since its initial
implementation (bd56ff54, git-stash: add new 'pop' subcommand,
2008-02-22), but its documentation does not mention it explicitly.
Moreover, both the usage shown by 'git stash -h' and the synopsis
section in the man page imply that 'git stash pop' does not have an
'--index' option.
First, this patch corrects the usage and the synopsis section.
Second, the patch moves the description of the '--index' option to the
'git stash pop' section in the documentation, and refers to it from
the 'git stash apply' section. This way it follows the intentions of
commit d1836637 (Documentation: teach stash/pop workflow instead of
stash/apply, 2009-05-28), as all 'git stash pop'-related documentation
will be in one place without references to 'git stash apply'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add references to the gitworkflows(7) manpage added in f948dd8
(Documentation: add manpage about workflows, 2008-10-19) to both
gittutorial(1) and git(1), so that new users might actually discover
and read it.
Noticed by Randal L. Schwartz.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
blame: correctly handle a path that used to be a directory
add -i: do not dump patch during application
Update draft release notes for 1.6.3.2
grep: fix colouring of matches with zero length
Documentation: teach stash/pop workflow instead of stash/apply
Change xdl_merge to generate output even for null merges
t6023: merge-file fails to output anything for a degenerate merge
'git submodule update --merge' merges the commit referenced by the
superproject into your local branch, instead of checking it out on
a detached HEAD.
As evidenced by the addition of "git submodule update --rebase", it
is useful to provide alternatives to the default 'checkout' behaviour
of "git submodule update". One such alternative is, when updating a
submodule to a new commit, to merge that commit into the current
local branch in that submodule. This is useful in workflows where
you want to update your submodule from its upstream, but you cannot
use --rebase, because you have downstream people working on top of
your submodule branch, and you don't want to disrupt their work.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The addition of "submodule.<name>.rebase" demonstrates the usefulness of
alternatives to the default behaviour of "git submodule update". However,
by naming the config variable "submodule.<name>.rebase", and making it a
boolean choice, we are artificially constraining future git versions that
may want to add _more_ alternatives than just "rebase".
Therefore, while "submodule.<name>.rebase" is not yet in a stable git
release, future-proof it, by changing it from
submodule.<name>.rebase = true/false
to
submodule.<name>.update = rebase/checkout
where "checkout" specifies the default behaviour of "git submodule update"
(checking out the new commit to a detached HEAD), and "rebase" specifies
the --rebase behaviour (where the current local branch in the submodule is
rebase onto the new commit). Thus .update == checkout is equivalent to
.rebase == false, and .update == rebase is equivalent to .rebase == true.
Finally, leaving .update unset is equivalent to leaving .rebase unset.
In future git versions, other alternatives to "git submodule update"
behaviour can be included by adding them to the list of allowable values
for the submodule.<name>.update variable.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Copy the description of date-order from rev-list-options.txt, and then
reword it to be commit specific. While we're at it, put <rev> <glob>...
on a new line to not exceed 80 characters.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/mktree:
mktree: validate entry type in input
mktree --batch: build more than one tree object
mktree --missing: updated usage message and man page
mktree --missing: allow missing objects
t1010: add mktree test
mktree: do not barf on a submodule commit
builtin-mktree.c: use a helper function to handle one line of input
mktree: use parse-options
build-in git-mktree
* mw/send-email:
send-email: Remove superfluous `my $editor = ...'
send-email: 'References:' should only reference what is sent
send-email: Handle "GIT:" rather than "GIT: " during --compose
Docs: send-email: --smtp-server-port can take symbolic ports
Docs: send-email: Refer to CONFIGURATION section for sendemail.multiedit
Docs: send-email: Put options back into alphabetical order
Use the description of "--ignore-errors" from git-add.txt as
inspiration.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder
Miklos Vajna
Junio C Hamano
Björn Gustavsson
Adam Brewster
Thiago Farina
Brandon Casey
Jens Lehmann
Heiko Voigt
Dmitry Potapov
Johannes Gilger
Nelson Elhage
Jari Aalto
Jeff King
Nicolas Sebrecht
Josh Triplett
Emmanuel Trillaud
Bert Wesarg
Matthieu Moy
René Scharfe
Nanako Shiraishi
Wesley J. Landaker
Lars Hjemli
David Kågedal
Wilhansen Li
Johan Herland
Tuomas Suutari
Johannes Schindelin
Thomas Rast
Paul Bolle
Ori Avtalion
Štěpán Němec
Johannes Sixt
Nicolas Pitre
Giuseppe Bilotta
Daniel Barkalow
Michael J Gruber
Stephen Boyd
André Goddard Rosa
Geoffrey Irving
Thadeu Lima de Souza Cascardo
Eric Wong
Robert Allan Zeh
Yann Dirson
Michał Kiedrowicz
SZEDER Gábor
Sitaram Chamarty
Larry D'Anna
Marc Branchaud
Elijah Newren
Ben Jackson
Mark Lodato
Alex Bennée
Paolo Bonzini
Uwe Kleine-König
Christian Couder
Markus Heidelberg
Santi Béjar