This rounds out the previous three patches, covering the
inequality logic for the "hash" variant of the functions.
As with the previous three, the accompanying code changes
are the mechanical result of applying the coccinelle patch;
see those patches for more discussion.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the flip side of the previous two patches: checking
for a non-zero oidcmp() can be more strictly expressed as
inequality. Like those patches, we write "!= 0" in the
coccinelle transformation, which covers by isomorphism the
more common:
if (oidcmp(E1, E2))
As with the previous two patches, this patch can be achieved
almost entirely by running "make coccicheck"; the only
differences are manual line-wrap fixes to match the original
code.
There is one thing to note for anybody replicating this,
though: coccinelle 1.0.4 seems to miss the case in
builtin/tag.c, even though it's basically the same as all
the others. Running with 1.0.7 does catch this, so
presumably it's just a coccinelle bug that was fixed in the
interim.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the partner patch to the previous one, but covering
the "hash" variants instead of "oid". Note that our
coccinelle rule is slightly more complex to avoid triggering
the call in hasheq().
I didn't bother to add a new rule to convert:
- hasheq(E1->hash, E2->hash)
+ oideq(E1, E2)
Since these are new functions, there won't be any such
existing callers. And since most of the code is already
using oideq, we're not likely to introduce new ones.
We might still see "!hashcmp(E1->hash, E2->hash)" from topics
in flight. But because our new rule comes after the existing
ones, that should first get converted to "!oidcmp(E1, E2)"
and then to "oideq(E1, E2)".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes we want to suppress a coccinelle transformation
inside a particular function. For example, in finding
conversions of hashcmp() to oidcmp(), we should not convert
the call in oidcmp() itself, since that would cause infinite
recursion. We write that like this:
@@
identifier f != oidcmp;
expression E1, E2;
@@
f(...) {...
- hashcmp(E1->hash, E2->hash)
+ oidcmp(E1, E2)
...}
to match the interior of any function _except_ oidcmp().
Unfortunately, this doesn't catch all cases (e.g., the one
in sequencer.c that this patch fixes). The problem, as
explained by one of the Coccinelle developers in [1], is:
For transformation, A ... B requires that B occur on every
execution path starting with A, unless that execution path
ends up in error handling code. (eg, if (...) { ...
return; }). Here your A is the start of the function. So
you need a call to hashcmp on every path through the
function, which fails when you add ifs.
[...]
Another issue with A ... B is that by default A and B
should not appear in the matched region. So your original
rule matches only the case where every execution path
contains exactly one call to hashcmp, not more than one.
One way to solve this is to put the pattern inside an
angle-bracket pattern like "<... P ...>", which allows zero
or more matches of P. That works (and is what this patch
does), but it has one drawback: it matches more than we care
about, and Coccinelle uses extra CPU. Here are timings for
"make coccicheck" before and after this patch:
[before]
real 1m27.122s
user 7m34.451s
sys 0m37.330s
[after]
real 2m18.040s
user 10m58.310s
sys 0m41.549s
That's not ideal, but it's more important for this to be
correct than to be fast. And coccicheck is already fairly
slow (and people don't run it for every single patch). So
it's an acceptable tradeoff.
There _is_ a better way to do it, which is to record the
position at which we find hashcmp(), and then check it
against the forbidden function list. Like:
@@
position p : script:python() { p[0].current_element != "oidcmp" };
expression E1,E2;
@@
- hashcmp@p(E1->hash, E2->hash)
+ oidcmp(E1, E2)
This is only a little slower than the current code, and does
the right thing in all cases. Unfortunately, not all builds
of Coccinelle include python support (including the ones in
Debian). Requiring it may mean that fewer people can easily
run the tool, which is worse than it simply being a little
slower.
We may want to revisit this decision in the future if:
- builds with python become more common
- we find more uses for python support that tip the
cost-benefit analysis
But for now this patch sticks with the angle-bracket
solution, and converts all existing cocci patches. This
fixes only one missed case in the current code, though it
makes a much better difference for some new rules I'm adding
(converting "!hashcmp()" to "hasheq()" misses over half the
possible conversions using the old form).
[1] https://public-inbox.org/git/alpine.DEB.2.21.1808240652370.2344@hadrien/
Helped-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git tbdiff" that lets us compare individual patches in two
iterations of a topic has been rewritten and made into a built-in
command.
* js/range-diff: (21 commits)
range-diff: use dim/bold cues to improve dual color mode
range-diff: make --dual-color the default mode
range-diff: left-pad patch numbers
completion: support `git range-diff`
range-diff: populate the man page
range-diff --dual-color: skip white-space warnings
range-diff: offer to dual-color the diffs
diff: add an internal option to dual-color diffs of diffs
color: add the meta color GIT_COLOR_REVERSE
range-diff: use color for the commit pairs
range-diff: add tests
range-diff: do not show "function names" in hunk headers
range-diff: adjust the output of the commit pairs
range-diff: suppress the diff headers
range-diff: indent the diffs just like tbdiff
range-diff: right-trim commit messages
range-diff: also show the diff between patches
range-diff: improve the order of the shown commits
range-diff: first rudimentary implementation
Introduce `range-diff` to compare iterations of a topic branch
...
Add a script (in contrib/) to help users of VSCode work better with
our codebase.
* js/vscode:
vscode: let cSpell work on commit messages, too
vscode: add a dictionary for cSpell
vscode: use 8-space tabs, no trailing ws, etc for Git's source code
vscode: wrap commit messages at column 72 by default
vscode: only overwrite C/C++ settings
mingw: define WIN32 explicitly
cache.h: extract enum declaration from inside a struct declaration
vscode: hard-code a couple defines
contrib: add a script to initialize VS Code configuration
After using this command extensively for the last two months, this
developer came to the conclusion that even if the dual color mode still
leaves a lot of room for confusion about what was actually changed, the
non-dual color mode is substantially worse in that regard.
Therefore, we really want to make the dual color mode the default.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tab completion of `git range-diff` is very convenient, especially
given that the revision arguments to specify the commit ranges to
compare are typically more complex than, say, what is normally passed
to `git log`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fsck" learns to make sure the optional commit-graph file is in
a sane state.
* ds/commit-graph-fsck: (23 commits)
coccinelle: update commit.cocci
commit-graph: update design document
gc: automatically write commit-graph files
commit-graph: add '--reachable' option
commit-graph: use string-list API for input
fsck: verify commit-graph
commit-graph: verify contents match checksum
commit-graph: test for corrupted octopus edge
commit-graph: verify commit date
commit-graph: verify generation number
commit-graph: verify parent list
commit-graph: verify root tree OIDs
commit-graph: verify objects exist
commit-graph: verify corrupt OID fanout and lookup
commit-graph: verify required chunks are present
commit-graph: verify catches corrupt signature
commit-graph: add 'verify' subcommand
commit-graph: load a root tree from specific graph
commit: force commit to parse from object database
commit-graph: parse commit from chosen graph
...
This mixture of quoting, pipes, and here-docs to produce expected
results in shell variables is difficult to follow. Simplify by using
simpler constructs that write output to files instead.
Noticed because without this patch, t/chainlint is not able to
understand the script in order to validate that its subshells use an
unbroken &&-chain, causing "make -C contrib/subtree test" to fail with
error: bug in the test script: broken &&-chain or run-away HERE-DOC:
in t7900.21.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, the cSpell extension ignores all files under .git/. That
includes, unfortunately, COMMIT_EDITMSG, i.e. commit messages. However,
spell checking is *quite* useful when writing commit messages... And
since the user hardly ever opens any file inside .git (apart from commit
messages, the config, and sometimes interactive rebase's todo lists),
there is really not much harm in *not* ignoring .git/.
The default also ignores `node_modules/`, but that does not apply to
Git, so let's skip ignoring that, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The quite useful cSpell extension allows VS Code to have "squiggly"
lines under spelling mistakes. By default, this would add too much
clutter, though, because so much of Git's source code uses words that
would trigger cSpell.
Let's add a few words to make the spell checking more useful by reducing
the number of false positives.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a couple settings for the .c/.h files so that it is easier to
conform to Git's conventions while editing the source code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When configuring VS Code as core.editor (via `code --wait`), we really
want to adhere to the Git conventions of wrapping commit messages.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The C/C++ settings are special, as they are the only generated VS Code
configurations that *will* change over the course of Git's development,
e.g. when a new constant is defined.
Therefore, let's only update the C/C++ settings, also to prevent user
modifications from being overwritten.
Ideally, we would keep user modifications in the C/C++ settings, but
that would require parsing JSON, a task for which a Unix shell script is
distinctly unsuited. So we write out .new files instead, and warn the
user if they may want to reconcile their changes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sadly, we do not get all of the definitions via ALL_CFLAGS. Some defines
are passed to GCC *only* when compiling specific files, such as git.o.
Let's just hard-code them into the script for the time being.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
VS Code is a lightweight but powerful source code editor which runs on
your desktop and is available for Windows, macOS and Linux. Among other
languages, it has support for C/C++ via an extension, which offers to
not only build and debug the code, but also Intellisense, i.e.
code-aware completion and similar niceties.
This patch adds a script that helps set up the environment to work
effectively with VS Code: simply run the Unix shell script
contrib/vscode/init.sh, which creates the relevant files, and open the
top level folder of Git's source code in VS Code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" learned the "--column" option that gives not just the
line number but the column number of the hit.
* tb/grep-column:
contrib/git-jump/git-jump: jump to exact location
grep.c: add configuration variables to show matched option
builtin/grep.c: add '--column' option to 'git-grep(1)'
grep.c: display column number of first match
grep.[ch]: extend grep_opt to allow showing matched column
grep.c: expose {,inverted} match column in match_line()
Documentation/config.txt: camel-case lineNumber for consistency
A recent patch series renamed the get_commit_tree_from_graph method but
forgot to update the coccinelle script that exempted it from rules
regarding accesses to 'maybe_tree'. This fixes that oversight to bring
the coccinelle scripts back to a good state.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Build and test procedure for netrc credential helper (in contrib/)
has been updated.
* tz/cred-netrc-cleanup:
git-credential-netrc: make "all" default target of Makefile
git-credential-netrc: fix exit status when tests fail
git-credential-netrc: use in-tree Git.pm for tests
git-credential-netrc: minor whitespace cleanup in test script
Continuing with the idea to programmatically enumerate various
pieces of data required for command line completion, the codebase
has been taught to enumerate options prefixed with "--no-" to
negate them.
* nd/completion-negation:
completion: collapse extra --no-.. options
completion: suppress some -no- options
parse-options: option to let --git-completion-helper show negative form
"git remote update" can take both a single remote nickname and a
nickname for remote groups, and the completion script (in contrib/)
has been taught about it.
* ls/complete-remote-update-names:
completion: complete remote names too
Continuing with the idea to programatically enumerate various
pieces of data required for command line completion, teach the
codebase to report the list of configuration variables
subcommands care about to help complete them.
* nd/complete-config-vars:
completion: complete general config vars in two steps
log-tree: allow to customize 'grafted' color
completion: support case-insensitive config vars
completion: keep other config var completion in camelCase
completion: drop the hard coded list of config vars
am: move advice.amWorkDir parsing back to advice.c
advice: keep config name in camelCase in advice_config[]
fsck: produce camelCase config key names
help: add --config to list all available config
fsck: factor out msg_id_info[] lazy initialization code
grep: keep all colors in an array
Add and use generic name->id mapping code for color slot parsing
Take advantage of 'git-grep(1)''s new option, '--column' in order to
teach Peff's 'git-jump' script how to jump to the correct column for any
given match.
'git-grep(1)''s output is in the correct format for Vim's jump list, so
no additional cleanup is necessary.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "make" in contrib/credential/netrc should run the "all" target
rather than the "test" target. Add an empty "all::" target like most of
our other Makefiles.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The netrc test.pl script calls git-credential-netrc which imports the
Git module. Pass GITPERLLIB to git-credential-netrc via PERL5LIB to
ensure the in-tree Git module is used for testing.
Signed-off-by: Luis Marsano <luis.marsano@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Work around zsh segfaulting when loading git-completion.zsh
* sg/completion-zsh-workaround:
completion: correct zsh detection when run from git-completion.zsh
The "autodie" module was added in Perl 5.10.1, but our INSTALL
document says "version 5.8 or later is needed".
As discussed in <87efhfvxzu.fsf@evledraar.gmail.com> this script is in
contrib/, so we might not want to apply that policy, however in this
case "autodie" was recently added as a "gratuitous safeguard" in
786ef50a23 ("git-credential-netrc: accept gpg option",
2018-05-12) (see
<CAHqJXRE8OKSKcck1APHAHccLZhox+tZi8nNu2RA74RErX8s3Pg@mail.gmail.com>).
Looking at it more carefully the addition of "autodie" inadvertently
introduced a logic error, since having it is equivalent to this patch:
@@ -245,10 +244,10 @@ sub load_netrc {
if ($gpgmode) {
my @cmd = ($options{'gpg'}, qw(--decrypt), $file);
log_verbose("Using GPG to open $file: [@cmd]");
- open $io, "-|", @cmd;
+ open $io, "-|", @cmd or die "@cmd: $!";
} else {
log_verbose("Opening $file...");
- open $io, '<', $file;
+ open $io, '<', $file or die "$file: $!$!;
}
# nothing to do if the open failed (we log the error later)
As shown in the context the intent of that code is not do die but to
log the error later.
Per my reading of the file this was the only thing autodie was doing
in this file (there was no other code it altered). So let's remove it,
both to fix the logic error and to get rid of the dependency.
1. <87efhfvxzu.fsf@evledraar.gmail.com>
(https://public-inbox.org/git/87efhfvxzu.fsf@evledraar.gmail.com/)
2. <CAHqJXRE8OKSKcck1APHAHccLZhox+tZi8nNu2RA74RErX8s3Pg@mail.gmail.com>
(https://public-inbox.org/git/CAHqJXRE8OKSKcck1APHAHccLZhox+tZi8nNu2RA74RErX8s3Pg@mail.gmail.com/)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v2.18.0-rc0~90^2 (completion: reduce overhead of clearing cached
--options, 2018-04-18) worked around a bug in bash's "set" builtin on
MacOS by using compgen instead. It was careful to avoid breaking zsh
by guarding this workaround with
if [[ -n ${ZSH_VERSION-}} ]]
Alas, this interacts poorly with git-completion.zsh's bash emulation:
ZSH_VERSION='' . "$script"
Correct it by instead using a new GIT_SOURCING_ZSH_COMPLETION shell
variable to detect whether git-completion.bash is being sourced from
git-completion.zsh. This way, the zsh variant is used both when run
from zsh directly and when run via git-completion.zsh.
Reproduction recipe:
1. cd git/contrib/completion && cp git-completion.zsh _git
2. Put the following in a new ~/.zshrc file:
autoload -U compinit; compinit
autoload -U bashcompinit; bashcompinit
fpath=(~/src/git/contrib/completion $fpath)
3. Open zsh and "git <TAB>".
With this patch:
Triggers nice git-completion.bash based tab completion
Without:
contrib/completion/git-completion.bash:354: read-only variable: QISUFFIX
zsh:12: command not found: ___main
zsh:15: _default: function definition file not found
_dispatch:70: bad math expression: operand expected at `/usr/bin/g...'
Segmentation fault
Reported-by: Rick van Hattem <wolph@wol.ph>
Reported-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commands that make use of --git-completion-helper feature could
now produce a lot of --no-xxx options that a command can take. This in
many case could nearly double the amount of completable options, using
more screen estate and also harder to search for the wanted option.
This patch attempts to mitigate that by collapsing extra --no-
options, the ones that are added by --git-completion-helper and not in
original struct option arrays. The "--no-..." option will be displayed
in this case to hint about more options, e.g.
> ~/w/git $ git clone --
--bare --origin=
--branch= --progress
--checkout --quiet
--config= --recurse-submodules
--depth= --reference=
--dissociate --reference-if-able=
--filter= --separate-git-dir=
--hardlinks --shallow-exclude=
--ipv4 --shallow-since=
--ipv6 --shallow-submodules
--jobs= --shared
--local --single-branch
--mirror --tags
--no-... --template=
--no-checkout --upload-pack=
--no-hardlinks --verbose
--no-tags
and when you complete it with --no-<tab>, all negative options will be
presented:
> ~/w/git $ git clone --no-
--no-bare --no-quiet
--no-branch --no-recurse-submodules
--no-checkout --no-reference
--no-config --no-reference-if-able
--no-depth --no-separate-git-dir
--no-dissociate --no-shallow-exclude
--no-filter --no-shallow-since
--no-hardlinks --no-shallow-submodules
--no-ipv4 --no-shared
--no-ipv6 --no-single-branch
--no-jobs --no-tags
--no-local --no-template
--no-mirror --no-upload-pack
--no-origin --no-verbose
--no-progress
Corner case: to make sure that people will never accidentally complete
the fake option "--no-..." there must be one real --no- in the first
complete listing even if it's not from the original struct option.
PS. This could could be made simpler with ";&" to fall through from
"--no-*" block and share the code but ";&" is not available on bash-3
(i.e. Mac)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The import-tars script (in contrib/) has been taught to handle
tarballs with overly long paths that use PAX extended headers.
* pa/import-tars-long-names:
import-tars: read overlong names from pax extended header
The list of commands with their various attributes were spread
across a few places in the build procedure, but it now is getting a
bit more consolidated to allow more automation.
* nd/command-list:
completion: allow to customize the completable command list
completion: add and use --list-cmds=alias
completion: add and use --list-cmds=nohelpers
Move declaration for alias.c to alias.h
completion: reduce completable command list
completion: let git provide the completable command list
command-list.txt: documentation and guide line
help: use command-list.txt for the source of guides
help: add "-a --verbose" to list all commands with synopsis
git: support --list-cmds=list-<category>
completion: implement and use --list-cmds=main,others
git --list-cmds: collect command list in a string_list
git.c: convert --list-* to --list-cmds=*
Remove common-cmds.h
help: use command-list.h for common command list
generate-cmds.sh: export all commands to command-list.h
generate-cmds.sh: factor out synopsis extract code
"git remote update" accepts both groups and single remotes.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update credential-netrc helper (in contrib/) to allow customizing
the GPG used to decrypt the encrypted .netrc file.
* lm/credential-netrc:
git-credential-netrc: accept gpg option
git-credential-netrc: adapt to test framework for git
Command line completion (in contrib/) learned to complete pathnames
for various commands better.
* sg/complete-paths:
t9902-completion: exercise __git_complete_index_file() directly
completion: don't return with error from __gitcomp_file_direct()
completion: fill COMPREPLY directly when completing paths
completion: improve handling quoted paths in 'git ls-files's output
completion: remove repeated dirnames with 'awk' during path completion
t9902-completion: ignore COMPREPLY element order in some tests
completion: use 'awk' to strip trailing path components
completion: let 'ls-files' and 'diff-index' filter matching paths
completion: improve handling quoted paths on the command line
completion: support completing non-ASCII pathnames
completion: simplify prefix path component handling during path completion
completion: move __git_complete_index_file() next to its helpers
t9902-completion: add tests demonstrating issues with quoted pathnames
There are 581 config variables as of now when you do "git config
<tab>" which can fill up a few screens and is not very helpful when
you have to look through columns of text to find what you want.
This patch instead shows you only first level when you do
git config <tab>
There are 78 items, which use up 8 rows in my screen. Compared to
screens of text, it's pretty good. Once you have chosen you first
level, e.g. color:
git config color.<tab>
will show you all color.*
This is not a new idea. branch.* and remote.* completion already does
this for second and third levels. For those variables, you'll need to
<tab> three times to get full variable name.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Config variables are case-insensitive but this case/esac construct is
case-sensitive by default. For bash v4, it'll be easy. For platforms
that are stuck with older versions, we need an external command, but
that is not that critical. And where this additional overhead matters
the most is Windows, but luckily Git for Windows ships with Bash v4.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last patch makes "git config <tab>" shows camelCase names because
that's what's in the source: config.txt. There are still a couple
manual var completion in this code. Let's make them follow the naming
convention as well.
In theory we could automate this part too because we have the
information. But let's stick to one step at a time and leave this for
later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new help option --config-for-completion is a machine friendlier
version of --config where all the placeholders and wildcards are
dropped, leaving only the good, completable prefixes for
git-completion.bash to consume.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/command-list:
completion: allow to customize the completable command list
completion: add and use --list-cmds=alias
completion: add and use --list-cmds=nohelpers
Move declaration for alias.c to alias.h
completion: reduce completable command list
completion: let git provide the completable command list
command-list.txt: documentation and guide line
help: use command-list.txt for the source of guides
help: add "-a --verbose" to list all commands with synopsis
git: support --list-cmds=list-<category>
completion: implement and use --list-cmds=main,others
git --list-cmds: collect command list in a string_list
git.c: convert --list-* to --list-cmds=*
Remove common-cmds.h
help: use command-list.h for common command list
generate-cmds.sh: export all commands to command-list.h
generate-cmds.sh: factor out synopsis extract code
When 7fb6aefd2a (Merge branch 'nd/parseopt-completion' - 2018-03-14)
is merged, the completion for negative form is left out because the
series is alread long and it could be done in a follow up series. This
is it.
--git-completion-helper now provides --no-xxx so that git-completion.bash
can drop the extra custom --no-xxx in the script. It adds a lot more
--no-xxx than what's current provided by the git-completion.bash
script. We'll trim that down later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Importing gcc tarballs[1] with import-tars script (in contrib) fails
when hitting a pax extended header.
Make sure we always read the extended attributes from the pax entries,
and store the 'path' value if found to be used in the next ustar entry.
The code to parse pax extended headers was written consulting the Pax
Pax Interchange Format documentation [2].
[1] http://ftp.gnu.org/gnu/gcc/gcc-7.3.0/gcc-7.3.0.tar.xz
[2] https://www.freebsd.org/cgi/man.cgi?manpath=FreeBSD+8-current&query=tar&sektion=5
Signed-off-by: Pedro Alvarez <palvarez89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King
Junio C Hamano
Johannes Schindelin
Eric Sunshine
Jonathan Nieder
Derrick Stolee
Taylor Blau
Todd Zullinger
Luis Marsano
Ævar Arnfjörð Bjarmason
SZEDER Gábor
Nguyễn Thái Ngọc Duy
Łukasz Stelmach
Pedro Alvarez Piedehierro