* jh/notes: (33 commits)
Documentation: fix a few typos in git-notes.txt
notes: fix malformed tree entry
builtin-notes: Minor (mostly parse_options-related) fixes
builtin-notes: Add "copy" subcommand for copying notes between objects
builtin-notes: Misc. refactoring of argc and exit value handling
builtin-notes: Add -c/-C options for reusing notes
builtin-notes: Refactor handling of -F option to allow combining -m and -F
builtin-notes: Deprecate the -m/-F options for "git notes edit"
builtin-notes: Add "append" subcommand for appending to note objects
builtin-notes: Add "add" subcommand for adding notes to objects
builtin-notes: Add --message/--file aliases for -m/-F options
builtin-notes: Add "list" subcommand for listing note objects
Documentation: Generalize git-notes docs to 'objects' instead of 'commits'
builtin-notes: Add "prune" subcommand for removing notes for missing objects
Notes API: prune_notes(): Prune notes that belong to non-existing objects
t3305: Verify that removing notes triggers automatic fanout consolidation
builtin-notes: Add "remove" subcommand for removing existing notes
Teach builtin-notes to remove empty notes
Teach notes code to properly preserve non-notes in the notes tree
t3305: Verify that adding many notes with git-notes triggers increased fanout
...
Conflicts:
Makefile
If GIT_ASKPASS is not set and SSH_ASKPASS set, GIT_ASKPASS will
use SSH_ASKPASS.
Signed-off-by: Frank Li <lznuaa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare 1.7.0.1 release notes
Fix use of mutex in threaded grep
dwim_ref: fix dangling symref warning
stash pop: remove 'apply' options during 'drop' invocation
diff: make sure --output=/bad/path is caught
Remove hyphen from "git-command" in two error messages
* maint-1.6.6:
dwim_ref: fix dangling symref warning
stash pop: remove 'apply' options during 'drop' invocation
diff: make sure --output=/bad/path is caught
Remove hyphen from "git-command" in two error messages
The builtin-ification includes some minor behavioural changes to the
command-line interface: It is no longer allowed to mix the -m and -F
arguments, and it is not allowed to use multiple -F options.
As part of the builtin-ification, we add the commit_notes() function
to the builtin API. This function (together with the notes.h API) can
be easily used from other builtins to manipulate the notes tree.
Also includes needed changes to t3301.
This patch has been improved by the following contributions:
- Stephen Boyd: Use die() instead of fprintf(stderr, ...) followed by exit(1)
Cc: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that we have bad interaction with the code related to
GIT_WORK_TREE and "grep --no-index", and broke running grep inside
the .git directory. For now, just revert it and resurrect it after
1.7.0 ships.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This required some fairly trivial packfile function 'const' cleanup,
since the builtin commands get a const char *argv[] array.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ap/merge-backend-opts:
Document that merge strategies can now take their own options
Extend merge-subtree tests to test -Xsubtree=dir.
Make "subtree" part more orthogonal to the rest of merge-recursive.
pull: Fix parsing of -X<option>
Teach git-pull to pass -X<option> to git-merge
git merge -X<option>
git-merge-file --ours, --theirs
Conflicts:
git-compat-util.h
Teach "-X <option>" command line argument to "git merge" that is passed to
strategy implementations. "ours" and "theirs" autoresolution introduced
by the previous commit can be asked to the recursive strategy.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves the call to setup_git_directory() for running "grep" from
the "git" wrapper to the implementation of the "grep" subcommand. A
new variable "use_index" is always true at this stage in the series,
and when it is on, we require that we are in a directory that is under
git control. To make sure we die the same way, we make a second call
into setup_git_directory() when we detect this situation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/replace:
Documentation: talk a little bit about GIT_NO_REPLACE_OBJECTS
Documentation: fix typos and spelling in replace documentation
replace: use a GIT_NO_REPLACE_OBJECTS env variable
This has the same effect as --no-replace-objects option; git ignores the
replace refs. When --no-replace-objects option is passed to git, this
environment variable is set to "1" and exported to subprocesses in order
to propagate the same setting.
It is useful for example for scripts, as the git commands used in them can
now be aware that they must not read replace refs.
Tested-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need for "git <command> -h" to depend on being inside
a repository.
Reported by Gerfried Fuchs through http://bugs.debian.org/462557
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-fetch was builtin-ized, the previous script was moved to
contrib/examples. Now, it is the sole remaining user for
'git fetch--tool'.
The fetch--tool code is still worth keeping around so people can
try out the old git-fetch.sh, for example when investigating
regressions from the builtinifaction.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dae556b (environment: add global variable to disable replacement)
adds a variable to enable/disable replacement, and it is enabled by
default for most commands.
So there is no way to disable it for some commands, which is annoying
when we want to get information about a commit that has been replaced.
For example:
$ git cat-file -p N
would output information about the replacement commit if commit N is
replaced.
With the "--no-replace-objects" option that this patch adds it is
possible to get information about the original commit using:
$ git --no-replace-objects cat-file -p N
While at it, let's add some documentation about this new option in the
"git replace" man page too.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/vcs-helper:
Makefile: remove remnant of separate http/https/ftp helpers
Use a clearer style to issue commands to remote helpers
Make the "traditionally-supported" URLs a special case
Makefile: install hardlinks for git-remote-<scheme> supported by libcurl if possible
Makefile: do not link three copies of git-remote-* programs
Makefile: git-http-fetch does not need expat
http-fetch: Fix Makefile dependancies
Add transport native helper executables to .gitignore
git-http-fetch: not a builtin
Use an external program to implement fetching with curl
Add support for external programs for handling native fetches
It's now similar wrapped the same way as in Documentation/git.txt, and
fits in a 67 characters wide terminal.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert git update-server-info to a built-in command and use parseopt.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/replace:
t6050: check pushing something based on a replaced commit
Documentation: add documentation for "git replace"
Add git-replace to .gitignore
builtin-replace: use "usage_msg_opt" to give better error messages
parse-options: add new function "usage_msg_opt"
builtin-replace: teach "git replace" to actually replace
Add new "git replace" command
environment: add global variable to disable replacement
mktag: call "check_sha1_signature" with the replacement sha1
replace_object: add a test case
object: call "check_sha1_signature" with the replacement sha1
sha1_file: add a "read_sha1_file_repl" function
replace_object: add mechanism to replace objects found in "refs/replace/"
refs: add a "for_each_replace_ref" function
* js/run-command-updates:
api-run-command.txt: describe error behavior of run_command functions
run-command.c: squelch a "use before assignment" warning
receive-pack: remove unnecessary run_status report
run_command: report failure to execute the program, but optionally don't
run_command: encode deadly signal number in the return value
run_command: report system call errors instead of returning error codes
run_command: return exit code as positive value
MinGW: simplify waitpid() emulation macros
This splits up git-http-fetch so that it isn't built-in.
It also removes the general dependency on curl, because it is no
longer used by any built-in code. Because they are no longer LIB_OBJS,
add LIB_H to the dependencies of http-related object files, and remove
http.h from the dependencies of transport.o
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/die_errno:
Use die_errno() instead of die() when checking syscalls
Convert existing die(..., strerror(errno)) to die_errno()
die_errno(): double % in strerror() output just in case
Introduce die_errno() that appends strerror(errno) to die()
In the case where a program was not found, it was still the task of the
caller to report an error to the user. Usually, this is an interesting case
but only few callers actually reported a specific error (though many call
sites report a generic error message regardless of the cause).
With this change the error is reported by run_command, but since there is
one call site in git.c that does not want that, an option is added to
struct child_process, which is used to turn the error off.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The motivation for this change is that system call failures are serious
errors that should be reported to the user, but only few callers took the
burden to decode the error codes that the functions returned into error
messages.
If at all, then only an unspecific error message was given. A prominent
example is this:
$ git upload-pack . | :
fatal: unable to run 'git-upload-pack'
In this example, git-upload-pack, the external command invoked through the
git wrapper, dies due to SIGPIPE, but the git wrapper does not bother to
report the real cause. In fact, this very error message is copied to the
syslog if git-daemon's client aborts the connection early.
With this change, system call failures are reported immediately after the
failure and only a generic failure code is returned to the caller. In the
above example the error is now to the point:
$ git upload-pack . | :
error: git-upload-pack died of signal
Note that there is no error report if the invoked program terminated with
a non-zero exit code, because it is reasonable to expect that the invoked
program has already reported an error. (But many run_command call sites
nevertheless write a generic error message.)
There was one special return code that was used to identify the case where
run_command failed because the requested program could not be exec'd. This
special case is now treated like a system call failure with errno set to
ENOENT. No error is reported in this case, because the call site in git.c
expects this as a normal result. Therefore, the callers that carefully
decoded the return value still check for this condition.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a general guideline, functions in git's code return zero to indicate
success and negative values to indicate failure. The run_command family of
functions followed this guideline. But there are actually two different
kinds of failure:
- failures of system calls;
- non-zero exit code of the program that was run.
Usually, a non-zero exit code of the program is a failure and means a
failure to the caller. Except that sometimes it does not. For example, the
exit code of merge programs (e.g. external merge drivers) conveys
information about how the merge failed, and not all exit calls are
actually failures.
Furthermore, the return value of run_command is sometimes used as exit
code by the caller.
This change arranges that the exit code of the program is returned as a
positive value, which can now be regarded as the "result" of the function.
System call failures continue to be reported as negative values.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For some reason, MinGW's bash cannot reliably detect failure of the child
process if a negative value is passed to exit(). This fixes it by
truncating the exit code in all calls of exit().
This issue was worked around in run_builtin() of git.c (2488df84 builtin
run_command: do not exit with -1, 2007-11-15). This workaround is no longer
necessary and is reverted.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a new argv array from a configured alias and the supplied
command line arguments, the new argv was allocated with one element too
many. Since the first element of the original argv array is skipped when
copying it to the new_argv, the number of elements that are allocated
should be reduced by one. 'count' is the number of elements that new_argv
contains, and *argcp is the number of elements in the original argv array.
So the total allocation (including the terminating NULL entry) for the
new_argv array should be:
count + (*argcp - 1) + 1
Also, the explicit assignment of the NULL terminating entry can be avoided
by just copying it over from the original argv array.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change calls to die(..., strerror(errno)) to use the new die_errno().
In the process, also make slight style adjustments: at least state
_something_ about the function that failed (instead of just printing
the pathname), and put paths in single quotes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command can only be used now to list replace refs in
"refs/replace/" and to delete them.
The option to list replace refs is "-l".
The option to delete replace refs is "-d".
The behavior should be consistent with how "git tag" and "git branch"
are working.
The code has been copied from "builtin-tag.c" by Kristian Høgsberg
<krh@redhat.com> and Carlos Rica <jasampler@gmail.com> that was itself
based on git-tag.sh and mktag.c by Linus Torvalds.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Essentially; s/type* /type */ as per the coding guidelines.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/bisect-filter: (21 commits)
rev-list: add "int bisect_show_flags" in "struct rev_list_info"
rev-list: remove last static vars used in "show_commit"
list-objects: add "void *data" parameter to show functions
bisect--helper: string output variables together with "&&"
rev-list: pass "int flags" as last argument of "show_bisect_vars"
t6030: test bisecting with paths
bisect: use "bisect--helper" and remove "filter_skipped" function
bisect: implement "read_bisect_paths" to read paths in "$GIT_DIR/BISECT_NAMES"
bisect--helper: implement "git bisect--helper"
bisect: use the new generic "sha1_pos" function to lookup sha1
rev-list: call new "filter_skip" function
patch-ids: use the new generic "sha1_pos" function to lookup sha1
sha1-lookup: add new "sha1_pos" function to efficiently lookup sha1
rev-list: pass "revs" to "show_bisect_vars"
rev-list: make "show_bisect_vars" non static
rev-list: move code to show bisect vars into its own function
rev-list: move bisect related code into its own file
rev-list: make "bisect_list" variable local to "cmd_rev_list"
refs: add "for_each_ref_in" function to refactor "for_each_*_ref" functions
quote: add "sq_dequote_to_argv" to put unwrapped args in an argv array
...
This patch implements a new "git bisect--helper" builtin plumbing
command that will be used to migrate "git-bisect.sh" to C.
We start by implementing only the "--next-vars" option that will
read bisect refs from "refs/bisect/", and then compute the next
bisect step, and output shell variables ready to be eval'ed by
the shell.
At this step, "git bisect--helper" ignores the paths that may
have been put in "$GIT_DIR/BISECT_NAMES". This will be fixed in a
later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used in GUIs to open installed HTML documentation in the
browser.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to simply try calling execvp(); if it succeeded, then we were done
and the new program was running. If it didn't, then we knew that it wasn't
a valid command.
Unfortunately, this interacted badly with the new pager handling. Now that
git remains the parent process and the pager is spawned, git has to hang
around until the pager is finished. We install an atexit handler to do
this, but that handler never gets called if we successfully run execvp.
You could see this behavior by running any dashed external using a pager
(e.g., "git -p stash list"). The command finishes running, but the pager
is still going. In the case of less, it then gets an error reading from
the terminal and exits, potentially leaving the terminal in a broken state
(and not showing the output).
This patch just uses run_command() to try running the dashed external. The
parent git process then waits for the external process to complete and
then handles the pager cleanup as it would for an internal command.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a static function called run_command which
conflicts with the library function in run-command.c; this
isn't a problem currently, but prevents including
run-command.h in git.c.
This patch just renames the static function to something
more specific and non-conflicting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the calling code.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Frank Li
Pete Harlan
Johan Herland
Linus Torvalds
Avery Pennarun
Christian Couder
Jonathan Nieder
Matthieu Moy
René Scharfe
Johannes Sixt
Brandon Casey
Thomas Rast
Felipe Contreras
Mike Ralphson
Markus Heidelberg
Jeff King
Steffen Prohaska