This should improve readability. Compare "thislongname" and
"thisLongName". The following keys are left in unchanged. We can
decide what to do with them later.
- am.keepcr
- core.autocrlf .safecrlf .trustctime
- diff.dirstat .noprefix
- gitcvs.usecrlfattr
- gui.blamehistoryctx .trustmtime
- pull.twohead
- receive.autogc
- sendemail.signedoffbycc .smtpsslcertpath .suppresscc
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, a patch that affects outside the working area (either a
Git controlled working tree, or the current working directory when
"git apply" is used as a replacement of GNU patch) is rejected as a
mistake (or a mischief). Git itself does not create such a patch,
unless the user bends over backwards and specifies a non-standard
prefix to "git diff" and friends.
When `git apply` is used as a "better GNU patch", the user can pass
the `--unsafe-paths` option to override this safety check. This
option has no effect when `--index` or `--cached` is in use.
The new test was stolen from Jeff King with slight enhancements.
Note that a few new tests for touching outside the working area by
following a symbolic link are still expected to fail at this step,
but will be fixed in later steps.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
git-apply accepts the --cached option, not --cache.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove some stray usage of other bracket types and asterisks for the
same purpose.
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users reading git-apply documentation may also be interested in git-am,
especially after receiving an email created with git-format-patch. The
documentation for git-am already references git-apply. Add the reverse.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
The documentation for 'git apply' uses both the terms
"work tree" and "working tree". Since the glossary uses
the term "working tree", change all occurrences of
"work tree" to "working tree".
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for 'git apply' talks about applying a
patch/diff to the index and to the working tree, which seems
to imply that it will not work outside a git repository.
Actually 'git patch' works outside a repository (which can
be useful especially for applying binary or rename patches that
the standard "patch" utility cannot handle), so the documentation
should mention it.
Thanks to Junio for suggesting better wording.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description for -z is too vague and general for the
apply, diff*, and log commands.
Change the description of -z for 'git log' to note that
commits will be separated by NULs.
Change the description of -z for 'git diff*' and 'git apply'
to note that it applies to the --numstat option, and for
'git diff*' also for --raw option.
Also correct the description of the "munging" of pathanmes that
takes place in the absence of -z for the 'git diff*' and
'git apply' commands, namely that apart from the characters mentioned,
double quotes will also be escaped and that the pathname will be
enclosed in double quotes if any characters are escaped.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce --ignore-whitespace option and corresponding config bool to
ignore whitespace differences while applying patches, akin to the
'patch' program.
'git am', 'git rebase' and the bash git completion are made aware of
this option.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch can be applied to the work tree, the index or both, but the
short description made it look like it's always applied to both.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final hunk in this patch corrects what appears to be a typo:
of --> or
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only incompatible change is that the user how have to use '--'
before a patch file if it is named "--build-fake-ancestor=something".
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows --include=pathspec, similar to --exclude=pathspec.
The rule when one or both of these are used is that the include/exclude
patterns are examined in the order they are given on the command line, and
the first match determines if a patch to each path is used or not. Hence:
$ git apply --include='specific.h' --exclude='*.h' <diff
would apply the patch to specific.h header file, but all other patches in
the input file to other header files are ignored. A patch to a path that
does not match any include/exclude pattern is used by default if there is
no include pattern on the command line, and ignored if there is any
include pattern.
This originally came from Joe Perches, but both the design of the
semantics and the implementation have been redone complately.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/apply-root:
git-apply --directory: make --root more similar to GNU diff
apply --root: thinkofix.
Teach "git apply" to prepend a prefix with "--root=<root>"
Applying a patch in the directory that is different from what the patch
records is done with --directory option in GNU diff. The --root option we
introduced previously does the same, and we can call it the same way to
give users more familiar feel.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some manual pages use teletype font to set command names. We
change them to use italics, instead. This creates a visual
distinction between names of commands and command lines that
can be typed at the command line. It is also more consistent
with other man pages outside Git.
In this patch, the commands named are non-git commands like bash.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This includes nongit commands like RCS 'merge'. This patch only
italicizes names of commands if they had no formatting before.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With "git apply --root=<root>", all file names in the patch are prepended
with <root>. If a "-p" value was given, the paths are stripped _before_
prepending <root>.
Wished for by HPA.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes, the easiest way to fix up a patch is to edit it directly, even
adding or deleting lines. Now, many people are not as divine as certain
benevolent dictators as to update the hunk headers correctly at the first
try.
So teach the tool to do it for us.
[jc: with tests]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds description of core.whitespace to the manual page of git-config,
and updates the stale description of whitespace handling in the manual
page of git-apply.
Also demote "strip" to a synonym status for "fix" as the value of --whitespace
option given to git-apply.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am used "git apply -z --index-info" to find the original versions
of the files touched by the diff, to be able to do an inexpensive
three-way merge.
This operation makes only sense in a repository, since the index
information in the diff refers to blobs, which have to be present in
the current repository.
Therefore, teach "git apply" a mode to write out the result as an
index file to begin with, obviating the need for scripts to do it
themselves.
The sole user for --index-info is "git am" is converted to
use --build-fake-ancestor in this patch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply "Subproject commit HEX" changes produced by git-diff.
As usual in the current git, only the superproject itself is actually
modified (possibly creating empty directories for new submodules).
Any checked-out submodule is left untouched and is not required to
be up-to-date.
With clean-ups from Junio C Hamano.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document -v (short form of --verbose). Redo usage
to not wrap on 80 column terminal with typical
settings.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Historically we did not allow binary patch applied without an
explicit permission from the user, and this flag was the way to
do so. This makes the flag a no-op by always allowing binary
patch application.
Signed-off-by: Junio C Hamano <junkio@cox.net>
After a failed "git am" attempt:
git apply --reject --verbose .dotest/patch
applies hunks that are applicable and leaves *.rej files the
rejected hunks, and it reports what it is doing. With --index,
files with a rejected hunk do not get their index entries
updated at all, so "git diff" will show the hunks that
successfully got applied.
Without --verbose to remind the user that the patch updated some
other paths cleanly, it is very easy to lose track of the status
of the working tree, so --reject implies --verbose.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Nguyễn Thái Ngọc Duy
Junio C Hamano
Thomas Ackermann
Jeff King
Michał Kiedrowicz
Štěpán Němec
Brad King
Thomas Rast
Björn Gustavsson
Giuseppe Bilotta
Björn Steinbrink
David J. Mellor
Danijel Tasov
Miklos Vajna
Jonathan Nieder
Johannes Schindelin
Stephan Beyer
Christian Couder
Dan McGee
Wincent Colaiuta
Sven Verdoolaege
Andrew Ruder
Junio C Hamano
Petr Baudis
Jonas Fonseca