OPT_COUNTUP() merely increments the counter upon --option, and resets it
to 0 upon --no-option, which means that there is no "unspecified" value
with which a client can initialize the counter to determine whether or
not --[no]-option was seen at all.
Make OPT_COUNTUP() treat any negative number as an "unspecified" value
to address this shortcoming. In particular, if a client initializes the
counter to -1, then if it is still -1 after parse_options(), then
neither --option nor --no-option was seen; if it is 0, then --no-option
was seen last, and if it is 1 or greater, than --option was seen last.
This change does not affect the behavior of existing clients because
they all use the initial value of 0 (or more).
Note that builtin/clean.c initializes the variable used with
OPT__FORCE (which uses OPT_COUNTUP()) to a negative value, but it is set
to either 0 or 1 by reading the configuration before the code calls
parse_options(), i.e. as far as parse_options() is concerned, the
initial value of the variable is not negative.
To test this behavior, in test-parse-options.c, "verbose" is set to
"unspecified" while quiet is set to 0 which will test the new behavior
with all sets of values.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPT_CMDMODE mechanism was introduced in the release of 1.8.5 to actively
notice when multiple "operation mode" options that specify mutually
incompatible operation modes are given.
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement 'git pull' in C.
* pt/pull-builtin:
pull: remove redirection to git-pull.sh
pull --rebase: error on no merge candidate cases
pull --rebase: exit early when the working directory is dirty
pull: configure --rebase via branch.<name>.rebase or pull.rebase
pull: teach git pull about --rebase
pull: set reflog message
pull: implement pulling into an unborn branch
pull: fast-forward working tree if head is updated
pull: check if in unresolved merge state
pull: support pull.ff config
pull: error on no merge candidates
pull: pass git-fetch's options to git-fetch
pull: pass git-merge's options to git-merge
pull: pass verbosity, --progress flags to fetch and merge
pull: implement fetch + merge
pull: implement skeletal builtin pull
argv-array: implement argv_array_pushv()
parse-options-cb: implement parse_opt_passthru_argv()
parse-options-cb: implement parse_opt_passthru()
The unsigned long option parsing (including 'k'/'m'/'g' suffix
parsing) is more widely applicable. Add support for OPT_MAGNITUDE
to parse-options.h and change pack-objects.c use this support.
The error behavior on parse errors follows that of OPT_INTEGER. The
name of the option that failed to parse is reported with a brief
message describing the expect format for the option argument and
then the full usage message for the command invoked.
This differs from the previous behavior for OPT_ULONG used in
pack-objects for --max-pack-size and --window-memory which used to
display the value supplied in the error message and did not display
the full usage message.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain git commands, such as git-pull, are simply wrappers around other
git commands like git-fetch, git-merge and git-rebase. As such, these
wrapper commands will typically need to "pass through" command-line
options of the commands they wrap.
Implement the parse_opt_passthru_argv() parse-options callback, which
will reconstruct all the provided command-line options into an
argv_array, such that it can be passed to another git command. This is
useful for passing command-line options that can be specified multiple
times.
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain git commands, such as git-pull, are simply wrappers around other
git commands like git-fetch, git-merge and git-rebase. As such, these
wrapper commands will typically need to "pass through" command-line
options of the commands they wrap.
Implement the parse_opt_passthru() parse-options callback, which will
reconstruct the command-line option into an char* string, such that it
can be passed to another git command.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation and some comments still refer to files in builtin/
as 'builtin-*.[cho]'. Update these to show the correct location.
Signed-off-by: Phil Hord <hordp@cisco.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Assisted-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used the approxidate() parser for "--expire=<timestamp>" options
of various commands, but it is better to treat --expire=all and
--expire=now a bit more specially than using the current timestamp.
Update "git gc" and "git reflog" with a new parsing function for
expiry dates.
* jc/prune-all:
prune: introduce OPT_EXPIRY_DATE() and use it
api-parse-options.txt: document "no-" for non-boolean options
git-gc.txt, git-reflog.txt: document new expiry options
date.c: add parse_expiry_date()
Earlier we added support for --expire=all (or --expire=now) that
considers all crufts, regardless of their age, as eligible for
garbage collection by turning command argument parsers that use
approxidate() to use parse_expiry_date(), but "git prune" used a
built-in parse-options facility OPT_DATE() and did not benefit from
the new function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that the "no-" prefix can also be used for non-boolean
options.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In asciidoc 7, backticks like `foo` produced a typographic
effect, but did not otherwise affect the syntax. In asciidoc
8, backticks introduce an "inline literal" inside which markup
is not interpreted. To keep compatibility with existing
documents, asciidoc 8 has a "no-inline-literal" attribute to
keep the old behavior. We enabled this so that the
documentation could be built on either version.
It has been several years now, and asciidoc 7 is no longer
in wide use. We can now decide whether or not we want
inline literals on their own merits, which are:
1. The source is much easier to read when the literal
contains punctuation. You can use `master~1` instead
of `master{tilde}1`.
2. They are less error-prone. Because of point (1), we
tend to make mistakes and forget the extra layer of
quoting.
This patch removes the no-inline-literal attribute from the
Makefile and converts every use of backticks in the
documentation to an inline literal (they must be cleaned up,
or the example above would literally show "{tilde}" in the
output).
Problematic sites were found by grepping for '`.*[{\\]' and
examined and fixed manually. The results were then verified
by comparing the output of "html2text" on the set of
generated html pages. Doing so revealed that in addition to
making the source more readable, this patch fixes several
formatting bugs:
- HTML rendering used the ellipsis character instead of
literal "..." in code examples (like "git log A...B")
- some code examples used the right-arrow character
instead of '->' because they failed to quote
- api-config.txt did not quote tilde, and the resulting
HTML contained a bogus snippet like:
<tt><sub></tt> foo <tt></sub>bar</tt>
which caused some parsers to choke and omit whole
sections of the page.
- git-commit.txt confused ``foo`` (backticks inside a
literal) with ``foo'' (matched double-quotes)
- mentions of `A U Thor <author@example.com>` used to
erroneously auto-generate a mailto footnote for
author@example.com
- the description of --word-diff=plain incorrectly showed
the output as "[-removed-] and {added}", not "{+added+}".
- using "prime" notation like:
commit `C` and its replacement `C'`
confused asciidoc into thinking that everything between
the first backtick and the final apostrophe were meant
to be inside matched quotes
- asciidoc got confused by the escaping of some of our
asterisks. In particular,
`credential.\*` and `credential.<url>.\*`
properly escaped the asterisk in the first case, but
literally passed through the backslash in the second
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long options can be negated by adding no- right after the leading
two dashes. This is useful e.g. to override options set by aliases.
For options that are defined to start with no- already, this looks
a bit funny. Allow such options to also be negated by removing the
prefix.
The following thirteen options are affected:
apply --no-add
bisect--helper --no-checkout
checkout-index --no-create
clone --no-checkout --no-hardlinks
commit --no-verify --no-post-rewrite
format-patch --no-binary
hash-object --no-filters
read-tree --no-sparse-checkout
revert --no-commit
show-branch --no-name
update-ref --no-deref
The following five are NOT affected because they are defined with
PARSE_OPT_NONEG or the non-negated version is defined as well:
branch --no-merged
format-patch --no-stat --no-numbered
update-index --no-assume-unchanged --no-skip-worktree
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add OPT_NOOP_NOARG, a helper macro to define deprecated options in a
standard way. The help text is taken from the no-op option -r of
git revert.
The callback could be made to emit a (conditional?) warning later. And
we could also add OPT_NOOP (requiring an argument) etc. as needed.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is natural to expect that an option defined with OPT_BOOLEAN() could be
used in this way:
int option = -1; /* unspecified */
struct option options[] = {
OPT_BOOLEAN(0, "option", &option, "set option"),
OPT_END()
};
parse_options(ac, av, prefix, options, usage, 0);
if (option < 0)
... do the default thing ...
else if (!option)
... --no-option was given ...
else
... --option was given ...
to easily tell three cases apart:
- There is no mention of the `--option` on the command line;
- The variable is positively set with `--option`; or
- The variable is explicitly negated with `--no-option`.
Unfortunately, this is not the case. OPT_BOOLEAN() increments the variable
every time `--option` is given, and resets it to zero when `--no-option`
is given.
As a first step to remedy this, introduce a true boolean OPT_BOOL(), and
rename OPT_BOOLEAN() to OPT_COUNTUP(). To help transitioning, OPT_BOOLEAN
and OPTION_BOOLEAN are defined as deprecated synonyms to OPT_COUNTUP and
OPTION_COUNTUP respectively.
This is what db7244b (parse-options new features., 2007-11-07) from four
years ago started by marking OPTION_BOOLEAN as "INCR would have been a
better name".
Some existing users do depend on the count-up semantics; for example,
users of OPT__VERBOSE() could use it to raise the verbosity level with
repeated use of `-v` on the command line, but they probably should be
rewritten to use OPT__VERBOSITY() instead these days. I suspect that some
users of OPT__FORCE() may also use it to implement different level of
forcibleness but I didn't check.
On top of this patch, here are the remaining clean-up tasks that other
people can help:
- Look at each hit in "git grep -e OPT_BOOLEAN"; trace all uses of the
value that is set to the underlying variable, and if it can proven that
the variable is only used as a boolean, replace it with OPT_BOOL(). If
the caller does depend on the count-up semantics, replace it with
OPT_COUNTUP() instead.
- Same for OPTION_BOOLEAN; replace it with OPTION_SET_INT and arrange to
set 1 to the variable for a true boolean, and otherwise replace it with
OPTION_COUNTUP.
- Look at each hit in "git grep -e OPT__VERBOSE -e OPT__QUIET" and see if
they can be replaced with OPT__VERBOSITY().
I'll follow this message up with a separate patch as an example.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add OPT__FORCE as a helper macro in the same spirit as OPT__VERBOSE
et.al. to simplify defining -f/--force options.
Signed-off-by: Rene Scharfe <rene.scharfe@lstfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows better help text to be defined than "be quiet". Also make use
of the macro in a place that already had a different description. No
object code changes intended.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows better help text to be defined than "dry run". Also make use
of the macro in places that already had a different description. No
object code changes intended.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows better help text to be defined than "be verbose". Also make use
of the macro in places that already had a different description. No
object code changes intended.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to some unpleasant interaction between the `quote', 'italics',
and `monospace` rules, a certain paragraph ends up rendered like so:
‘short` is a character for the short option
(e.g. <tt>'e\’</tt> for <tt>-e</tt>, use <tt>0</tt> to omit),
Use the {apostrophe} to avoid this.
While at it, escape "->" strings: they are meant as a literal
two-character C operator, not a right-pointing arrow.
Reported-by: Frédéric Brière <fbriere@fbriere.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git-branch, git-show-branch, git-grep, and all the diff-based
programs accept an optional argument <when> for --color. The argument
is a colorbool: "always", "never", or "auto". If no argument is given,
"always" is used; --no-color is an alias for --color=never. This makes
the command-line interface consistent with other GNU tools, such as `ls'
and `grep', and with the git-config color options. Note that, without
an argument, --color and --no-color work exactly as before.
To implement this, two internal changes were made:
1. Allow the first argument of git_config_colorbool() to be NULL,
in which case it returns -1 if the argument isn't "always", "never",
or "auto".
2. Add OPT_COLOR_FLAG(), OPT__COLOR(), and parse_opt_color_flag_cb()
to the option parsing library. The callback uses
git_config_colorbool(), so color.h is now a dependency
of parse-options.c.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dbd0f5c (Files given on the command line are relative to $cwd,
2008-08-06) introduced parse_options_fix_filename() as a minimal fix.
OPT_FILENAME is intended to be a more robust fix for the same issue.
OPT_FILENAME and its associated enum OPTION_FILENAME are used to
represent filename options within the parse options API.
This option is similar to OPTION_STRING. If --no is prefixed to the
option the filename is unset. If no argument is given and the default
value is set, the filename is set to the default value. The difference
is that the filename is prefixed with the prefix passed to
parse_options() (or parse_options_start()).
Update git-apply, git-commit, git-fmt-merge-msg, and git-tag to use
OPT_FILENAME with their filename options. Also, rename
parse_options_fix_filename() to fix_filename() as it is no longer
extern.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To give OPT_FILENAME the prefix, we pass the prefix to parse_options()
which passes the prefix to parse_options_start() which sets the prefix
member of parse_opts_ctx accordingly. If there isn't a prefix in the
calling context, passing NULL will suffice.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a way to recognize numerical options. The number is passed to
a callback function as a string.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add OPTION_NEGBIT and OPT_NEGBIT, mirroring OPTION_BIT and OPT_BIT.
OPT_NEGBIT can be used together with OPT_BIT to define two options
that cancel each other out.
Note: this patch removes the reminder from the test script because
it adds a test for --no-or4 and there already was one for --or4.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As suggested by Junio, disallow the flags PARSE_OPT_KEEP_UNKNOWN and
PARSE_OPT_STOP_AT_NON_OPTION to be turned on at the same time, as a
value of an unknown option could be mistakenly classified as a
non-option, stopping the parser early. E.g.:
git cmd --known --unknown value arg0 arg1
The parser should have stopped at "arg0", but it already stops at
"value".
This patch makes parse_options() die if the two flags are used in
combination.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some documentation of basics, macros and callback
implementation of the parse-options API.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of them are still stubs, but the procedure to build the HTML
documentation, maintaining the index and installing the end product are
there.
I placed names of people who are likely to know the most about the topic
in the stub files, so that volunteers will know whom to ask questions as
needed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva
Junio C Hamano
Charles Bailey
Paul Tan
Marat Radchenko
Nicolas Vigier
Phil Hord
Michael Haggerty
Thomas Ackermann
Jeff King
René Scharfe
Jonathan Nieder
Mark Lodato
Stephen Boyd
Stephan Beyer