The pre-receive and post-receive hooks were designed to be an
improvement over old style update and post-update hooks, which take
the update information on their command line and are limited by the
command line length limit. The same information is fed from the
standard input to pre/post-receive hooks instead to lift this
limitation. It has been mandatory for these new style hooks to
consume the update information fully from the standard input stream.
Otherwise, they would risk killing the receive-pack process via
SIGPIPE.
If a hook does not want to look at all the information, it is easy
to send its standard input to /dev/null (perhaps a niche use of hook
might need to know only the fact that a push was made, without
having to know what objects have been pushed to update which refs),
and this has already been done by existing hooks that are written
carefully.
However, because there is no good way to consistently fail hooks
that do not consume the input fully (a small push may result in a
short update record that may fit within the pipe buffer, to which
the receive-pack process may manage to write before the hook has a
chance to exit without reading anything, which will not result in a
death-by-SIGPIPE of receive-pack), it can lead to a hard to diagnose
"once in a blue moon" phantom failure.
Lift this "hooks must consume their input fully" mandate. A mandate
that is not enforced strictly is not helping us to catch mistakes in
hooks. If a hook has a good reason to decide the outcome of its
operation without reading the information we feed it, let it do so
as it pleases.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the client has requested side-band-64k capability, send any
of the internal error or warning messages in the muxed side-band
stream using the same band as our hook output, band #2. By putting
everything in one stream we ensure all messages are processed by
the side-band demuxer, avoiding interleaving between our own stderr
and the side-band demuxer's stderr buffers.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to avoid the warnings (or later, test failures) about
updating the current branch. It was never my intention to have
this test deal with a repository with a working directory, and it
is a very old bug that the test even used a non-bare repository
for the remote side of the push operations.
This fixes the interleaved output error we were seeing as a test
failure by avoiding the giant warning message we were getting back
about updating the current branch being risky.
Its not a real fix, but is something we should do no matter what,
because the behavior will change in the future to reject, and the
test would break at that time.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the client requests to enable side-band-64k capability we can
safely send any hook stdout or stderr data down side band #2,
so the client can present it to the user.
If side-band-64k isn't enabled, hooks continue to inherit stderr
from the parent receive-pack process.
When the side band channel is being used the push client will wind up
prefixing all server messages with "remote: ", just like fetch does,
so our test vector has to be updated with the new expected output.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch changes every occurrence of "! git" -- with the meaning
that a git call has to gracefully fail -- into "test_must_fail git".
This is useful to
- make sure the test does not fail because of a signal,
e.g. SIGSEGV, and
- advertise the use of "test_must_fail" for new tests.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a general principle, we should not use "git diff" to validate the
results of what git command that is being tested has done. We would not
know if we are testing the command in question, or locating a bug in the
cute hack of "git diff --no-index".
Rather use test_cmp for that purpose.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, test_expect_failure was designed to be the opposite
of test_expect_success, but this was a bad decision. Most tests
run a series of commands that leads to the single command that
needs to be tested, like this:
test_expect_{success,failure} 'test title' '
setup1 &&
setup2 &&
setup3 &&
what is to be tested
'
And expecting a failure exit from the whole sequence misses the
point of writing tests. Your setup$N that are supposed to
succeed may have failed without even reaching what you are
trying to test. The only valid use of test_expect_failure is to
check a trivial single command that is expected to fail, which
is a minority in tests of Porcelain-ish commands.
This large-ish patch rewrites all uses of test_expect_failure to
use test_expect_success and rewrites the condition of what is
tested, like this:
test_expect_success 'test title' '
setup1 &&
setup2 &&
setup3 &&
! this command should fail
'
test_expect_failure is redefined to serve as a reminder that
that test *should* succeed but due to a known breakage in git it
currently does not pass. So if git-foo command should create a
file 'bar' but you discovered a bug that it doesn't, you can
write a test like this:
test_expect_failure 'git-foo should create bar' '
rm -f bar &&
git foo &&
test -f bar
'
This construct acts similar to test_expect_success, but instead
of reporting "ok/FAIL" like test_expect_success does, the
outcome is reported as "FIXED/still broken".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only care about getting what should be an empty string and
sending it to a file, without a trailing LF, so the empty string
translates into a 0 byte file. Earlier when I originally wrote
these lines Mac OS X allowed the format string of printf to be
the empty string, but more recent versions appear to have been
'improved' with error messages if the format is not given.
This may cause problems if we ever wind up with changes to the hook
tests. A minor cleanup makes the test more safe on all systems,
by conforming to accepted printf conventions.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is nothing _wrong_ with egrep per se, but this way we
would have less dependency on external tools.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sergey Vlasov, Andy Parkins and Alex Riesen all pointed out that it
is possible for a single invocation of receive-pack to be given more
refs than the OS might allow us to pass as command line parameters
to a single hook invocation.
We don't want to break these up into multiple invocations (like
xargs might do) as that makes it impossible for the pre-receive
hook to verify multiple related ref updates occur at the same time,
and it makes it harder for post-receive to send out a single batch
notification.
Instead we pass the reference data on a pipe connected to the
hook's stdin, supplying one ref per line to the hook. This way a
single hook invocation can obtain an infinite amount of ref data,
without bumping into any operating system limits.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* js/diff-ni:
Get rid of the dependency to GNU diff in the tests
diff --no-index: support /dev/null as filename
diff-ni: fix the diff with standard input
diff: support reading a file from stdin via "-"
Bill Lear pointed out that it is easy to send out notifications of
changes with the update hook, but successful execution of the update
hook does not necessarily mean that the ref was actually updated.
Lock contention on the ref or being unable to append to the reflog
may prevent the ref from being changed. Sending out notifications
prior to the ref actually changing is very misleading.
To help this situation I am introducing two new hooks to the
receive-pack flow: pre-receive and post-receive. These new hooks
are invoked only once per receive-pack execution and are passed
three arguments per ref (refname, old-sha1, new-sha1).
The new post-receive hook is ideal for sending out notifications,
as it has the complete list of all refnames that were successfully
updated as well as the old and new SHA-1 values. This allows more
interesting notifications to be sent. Multiple ref updates could
be easily summarized into one email, for example.
The new pre-receive hook is ideal for logging update attempts, as it
is run only once for the entire receive-pack operation. It can also
be used to verify multiple updates happen at once, e.g. an update
to the `maint` head must also be accompained by a new annotated tag.
Lots of documentation improvements for receive-pack are included
in this change, as we want to make sure the new hooks are clearly
explained.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that "git diff" handles stdin and relative paths outside the
working tree correctly, we can convert all instances of "diff -u"
to "git diff".
This commit is really the result of
$ perl -pi.bak -e 's/diff -u/git diff/' $(git grep -l "diff -u" t/)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from commit c699a40d68215c7e44a5b26117a35c8a56fbd387)
Not all echos know -n. This was causing a test failure in
t5401-update-hooks.sh, but not t3800-mktag.sh for some reason.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Verify that the update hooks work as documented/advertised. This is
a simple set of tests to check that the update hooks run with the
parameters expected, have their STDOUT and STDERR redirected to
the client side of the connection, and that their STDIN does not
contain any data (as its actually /dev/null).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano
Shawn O. Pearce
Nanako Shiraishi
Stephan Beyer
Junio C Hamano
Johannes Schindelin
Jason Riedy