Граф коммитов

11 Коммитов

Автор SHA1 Сообщение Дата
Jeff King afa0876050 prefer test -h over test -L in shell scripts
Even though "-L" is POSIX, the former is more portable, and
we tend to prefer it already.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-27 10:48:23 -07:00
Ralf Wildenhues 22e5e58a3c Typos in code comments, an error message, documentation
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-22 13:25:08 -07:00
Richard Hartmann f66bc5f928 Always show which directory is not a git repository
Unify all

  fatal: Not a git repository

error messages so they include path information.

Signed-off-by: Richard Hartmann <richih@net.in.tum.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-21 18:46:41 -08:00
Bernt Hansen ac378633f3 git-new-workdir: Share SVN meta data between work dirs and the repository
Multiple work dirs with git svn caused each work dir to have its own
stale copy of the SVN meta data in .git/svn

git svn rebase updates commits with git-svn-id: in the repository and
stores the SVN meta data information only in that work dir.  Attempting to
git svn rebase in other work dirs for the same branch would fail because
the last revision fetched according to the git-svn-id is greater than the
revision in the SVN meta data for that work directory.

Signed-off-by: Bernt Hansen <bernt@norang.ca>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-15 00:05:18 -07:00
Shawn O. Pearce ea09ea22d6 Don't allow contrib/workdir/git-new-workdir to trash existing dirs
Recently I found that doing a sequence like the following:

  git-new-workdir a b
  ...
  git-new-workdir a b

by accident will cause a (and now also b) to have an infinite cycle
in its refs directory.  This is caused by git-new-workdir trying
to create the "refs" symlink over again, only during the second
time it is being created within a's refs directory and is now also
pointing back at a's refs.

This causes confusion in git as suddenly branches are named things
like "refs/refs/refs/refs/refs/refs/refs/heads/foo" instead of the
more commonly accepted "refs/heads/foo".  Plenty of commands start
to see ambiguous ref names and others just take ages to compute.

git-clone has the same safety check, so git-new-workdir should
behave just like it.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-05 22:24:54 -07:00
Shawn O. Pearce 8fa0ee3b50 Suggest unsetting core.bare when using new-workdir on a bare repository
If core.bare is set to true in the config file of a repository that
the user is trying to create a working directory from we should
abort and suggest to the user that they remove the option first.

If we leave the core.bare=true setting in the config file then
working tree operations will get confused when they attempt to
execute in the new workdir, as it shares its config file with the
bare repository.  The working tree operations will assume that the
workdir is bare and abort, which is not what the user wants.

If we changed core.bare to be false then working tree operations
will function in the workdir but other operations may fail in the
bare repository, as it claims to not be bare.

If we remove core.bare from the config then Git can fallback on
the legacy guessing behavior.  This allows operations in the bare
repository to work as though it were bare, while operations in the
workdirs to act as though they are not bare.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-22 15:18:13 -07:00
Shawn O. Pearce e301bfeea1 Fix new-workdir (again) to work on bare repositories
My day-job workflow involves using multiple workdirs attached to a
bunch of bare repositories.  Such repositories are stored inside of
a directory called "foo.git", which means `git rev-parse --git-dir`
will return "." and not ".git".  Under such conditions new-workdir
was getting confused about where the Git repository it was supplied
is actually located.

If we get "." for the result of --git-dir query it means we should
use the user supplied path as-is, and not attempt to perform any
magic on it, as the path is directly to the repository.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-22 15:18:13 -07:00
Simon Hausmann b658d50325 git-new-workdir: Fix shell warning about operator == used with test.
Use = instead of == with test to test for equality.

Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-26 18:18:47 -07:00
Julian Phillips 09381b458f new-workdir: handle rev-parse --git-dir not always giving full path
rev-parse --git-dir outputs a full path - except for the single case
of when the path would be $(pwd)/.git, in which case it outputs simply
.git.  Check for this special case and handle it.

Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-24 02:36:56 -07:00
Shawn O. Pearce 2e4aef5893 Allow contrib new-workdir to link into bare repositories
On one particular system I like to keep a cluster of bare Git
repositories and spawn new-workdirs off of them.  Since the bare
repositories don't have working directories associated with them
they don't have a .git/ subdirectory that hosts the repository we
are linking to.

Using a bare repository as the backing repository for a workdir
created by this script does require that the user delete core.bare
from the repository's configuration file, so that Git auto-senses
the bareness of a repository based on pathname information, and
not based on the config file.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-29 00:27:21 -07:00
Julian Phillips 4f01748d51 contrib/workdir: add a simple script to create a working directory
Add a simple script to create a working directory that uses symlinks
to point at an exisiting repository.  This allows having different
branches in different working directories but all from the same
repository.

Based on a description from Junio of how he creates multiple working
directories[1].  With the following caveat:

"This risks confusion for an uninitiated if you update a ref that
is checked out in another working tree, but modulo that caveat
it works reasonably well."

[1] http://article.gmane.org/gmane.comp.version-control.git/41513/

Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-31 01:26:28 -07:00