Граф коммитов

62 Коммитов

Автор SHA1 Сообщение Дата
Jeff King e31316263a http: optionally extract charset parameter from content-type
Since the previous commit, we now give a sanitized,
shortened version of the content-type header to any callers
who ask for it.

This patch adds back a way for them to cleanly access
specific parameters to the type. We could easily extract all
parameters and make them available via a string_list, but:

  1. That complicates the interface and memory management.

  2. In practice, no planned callers care about anything
     except the charset.

This patch therefore goes with the simplest thing, and we
can expand or change the interface later if it becomes
necessary.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-05-27 09:59:19 -07:00
Junio C Hamano d59c12d7ad Merge branch 'jl/nor-or-nand-and'
Eradicate mistaken use of "nor" (that is, essentially "nor" used
not in "neither A nor B" ;-)) from in-code comments, command output
strings, and documentations.

* jl/nor-or-nand-and:
  code and test: fix misuses of "nor"
  comments: fix misuses of "nor"
  contrib: fix misuses of "nor"
  Documentation: fix misuses of "nor"
2014-04-08 12:00:28 -07:00
Justin Lebar 01689909eb comments: fix misuses of "nor"
Signed-off-by: Justin Lebar <jlebar@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-31 15:29:27 -07:00
Jeff King beed336c3e http: never use curl_easy_perform
We currently don't reuse http connections when fetching via
the smart-http protocol. This is bad because the TCP
handshake introduces latency, and especially because SSL
connection setup may be non-trivial.

We can fix it by consistently using curl's "multi"
interface.  The reason is rather complicated:

Our http code has two ways of being used: queuing many
"slots" to be fetched in parallel, or fetching a single
request in a blocking manner. The parallel code is built on
curl's "multi" interface. Most of the single-request code
uses http_request, which is built on top of the parallel
code (we just feed it one slot, and wait until it finishes).

However, one could also accomplish the single-request scheme
by avoiding curl's multi interface entirely and just using
curl_easy_perform. This is simpler, and is used by post_rpc
in the smart-http protocol.

It does work to use the same curl handle in both contexts,
as long as it is not at the same time.  However, internally
curl may not share all of the cached resources between both
contexts. In particular, a connection formed using the
"multi" code will go into a reuse pool connected to the
"multi" object. Further requests using the "easy" interface
will not be able to reuse that connection.

The smart http protocol does ref discovery via http_request,
which uses the "multi" interface, and then follows up with
the "easy" interface for its rpc calls. As a result, we make
two HTTP connections rather than reusing a single one.

We could teach the ref discovery to use the "easy"
interface. But it is only once we have done this discovery
that we know whether the protocol will be smart or dumb. If
it is dumb, then our further requests, which want to fetch
objects in parallel, will not be able to reuse the same
connection.

Instead, this patch switches post_rpc to build on the
parallel interface, which means that we use it consistently
everywhere. It's a little more complicated to use, but since
we have the infrastructure already, it doesn't add any code;
we can just factor out the relevant bits from http_request.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-18 15:50:57 -08:00
Junio C Hamano c5a77e8f92 Merge branch 'bc/http-100-continue'
Issue "100 Continue" responses to help use of GSS-Negotiate
authentication scheme over HTTP transport when needed.

* bc/http-100-continue:
  remote-curl: fix large pushes with GSSAPI
  remote-curl: pass curl slot_results back through run_slot
  http: return curl's AUTHAVAIL via slot_results
2013-12-05 12:58:59 -08:00
Jeff King 0972ccd97c http: return curl's AUTHAVAIL via slot_results
Callers of the http code may want to know which auth types
were available for the previous request. But after finishing
with the curl slot, they are not supposed to look at the
curl handle again. We already handle returning other
information via the slot_results struct; let's add a flag to
check the available auth.

Note that older versions of curl did not support this, so we
simply return 0 (something like "-1" would be worse, as the
value is a bitflag and we might accidentally set a flag).
This is sufficient for the callers planned in this series,
who only trigger some optional behavior if particular bits
are set, and can live with a fake "no bits" answer.

Signed-off-by: Jeff King <peff@peff.net>
2013-10-31 10:05:55 -07:00
Jeff King c93c92f309 http: update base URLs when we see redirects
If a caller asks the http_get_* functions to go to a
particular URL and we end up elsewhere due to a redirect,
the effective_url field can tell us where we went.

It would be nice to remember this redirect and short-cut
further requests for two reasons:

  1. It's more efficient. Otherwise we spend an extra http
     round-trip to the server for each subsequent request,
     just to get redirected.

  2. If we end up with an http 401 and are going to ask for
     credentials, it is to feed them to the redirect target.
     If the redirect is an http->https upgrade, this means
     our credentials may be provided on the http leg, just
     to end up redirected to https. And if the redirect
     crosses server boundaries, then curl will drop the
     credentials entirely as it follows the redirect.

However, it, it is not enough to simply record the effective
URL we saw and use that for subsequent requests. We were
originally fed a "base" url like:

   http://example.com/foo.git

and we want to figure out what the new base is, even though
the URLs we see may be:

     original: http://example.com/foo.git/info/refs
    effective: http://example.com/bar.git/info/refs

Subsequent requests will not be for "info/refs", but for
other paths relative to the base. We must ask the caller to
pass in the original base, and we must pass the redirected
base back to the caller (so that it can generate more URLs
from it). Furthermore, we need to feed the new base to the
credential code, so that requests to credential helpers (or
to the user) match the URL we will be requesting.

This patch teaches http_request_reauth to do this munging.
Since it is the caller who cares about making more URLs, it
seems at first glance that callers could simply check
effective_url themselves and handle it. However, since we
need to update the credential struct before the second
re-auth request, we have to do it inside http_request_reauth.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-10-14 16:56:47 -07:00
Jeff King 78868962c0 http: provide effective url to callers
When we ask curl to access a URL, it may follow one or more
redirects to reach the final location. We have no idea
this has happened, as curl takes care of the details and
simply returns the final content to us.

The final URL that we ended up with can be accessed via
CURLINFO_EFFECTIVE_URL. Let's make that optionally available
to callers of http_get_*, so that they can make further
decisions based on the redirection.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-10-14 16:55:23 -07:00
Jeff King 2501aff8b7 http: hoist credential request out of handle_curl_result
When we are handling a curl response code in http_request or
in the remote-curl RPC code, we use the handle_curl_result
helper to translate curl's response into an easy-to-use
code. When we see an HTTP 401, we do one of two things:

  1. If we already had a filled-in credential, we mark it as
     rejected, and then return HTTP_NOAUTH to indicate to
     the caller that we failed.

  2. If we didn't, then we ask for a new credential and tell
     the caller HTTP_REAUTH to indicate that they may want
     to try again.

Rejecting in the first case makes sense; it is the natural
result of the request we just made. However, prompting for
more credentials in the second step does not always make
sense. We do not know for sure that the caller is going to
make a second request, and nor are we sure that it will be
to the same URL. Logically, the prompt belongs not to the
request we just finished, but to the request we are (maybe)
about to make.

In practice, it is very hard to trigger any bad behavior.
Currently, if we make a second request, it will always be to
the same URL (even in the face of redirects, because curl
handles the redirects internally). And we almost always
retry on HTTP_REAUTH these days. The one exception is if we
are streaming a large RPC request to the server (e.g., a
pushed packfile), in which case we cannot restart. It's
extremely unlikely to see a 401 response at this stage,
though, as we would typically have seen it when we sent a
probe request, before streaming the data.

This patch drops the automatic prompt out of case 2, and
instead requires the caller to do it. This is a few extra
lines of code, and the bug it fixes is unlikely to come up
in practice. But it is conceptually cleaner, and paves the
way for better handling of credentials across redirects.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-10-14 16:55:13 -07:00
Jeff King 1bbcc224cc http: refactor options to http_get_*
Over time, the http_get_strbuf function has grown several
optional parameters. We now have a bitfield with multiple
boolean options, as well as an optional strbuf for returning
the content-type of the response. And a future patch in this
series is going to add another strbuf option.

Treating these as separate arguments has a few downsides:

  1. Most call sites need to add extra NULLs and 0s for the
     options they aren't interested in.

  2. The http_get_* functions are actually wrappers around
     2 layers of low-level implementation functions. We have
     to pass these options through individually.

  3. The http_get_strbuf wrapper learned these options, but
     nobody bothered to do so for http_get_file, even though
     it is backed by the same function that does understand
     the options.

Let's consolidate the options into a single struct. For the
common case of the default options, we'll allow callers to
simply pass a NULL for the options struct.

The resulting code is often a few lines longer, but it ends
up being easier to read (and to change as we add new
options, since we do not need to update each call site).

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-30 17:21:59 -07:00
Junio C Hamano 574d51b575 Merge branch 'mv/ssl-ftp-curl'
Does anybody really use commit walkers over (s)ftp?

* mv/ssl-ftp-curl:
  Support FTP-over-SSL/TLS for regular FTP
2013-04-19 13:31:08 -07:00
Modestas Vainius 4bc444eb64 Support FTP-over-SSL/TLS for regular FTP
Add a boolean http.sslTry option which allows to enable AUTH SSL/TLS and
encrypted data transfers when connecting via regular FTP protocol.

Default is false since it might trigger certificate verification errors on
misconfigured servers.

Signed-off-by: Modestas Vainius <modestas@vainius.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-12 08:52:23 -07:00
Jeff King 4df13f69e9 http: drop http_error function
This function is a single-liner and is only called from one
place. Just inline it, which makes the code more obvious.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-06 18:56:46 -07:00
Jeff King 67d2a7b5c5 http: simplify http_error helper function
This helper function should really be a one-liner that
prints an error message, but it has ended up unnecessarily
complicated:

  1. We call error() directly when we fail to start the curl
     request, so we must later avoid printing a duplicate
     error in http_error().

     It would be much simpler in this case to just stuff the
     error message into our usual curl_errorstr buffer
     rather than printing it ourselves. This means that
     http_error does not even have to care about curl's exit
     value (the interesting part is in the errorstr buffer
     already).

  2. We return the "ret" value passed in to us, but none of
     the callers actually cares about our return value. We
     can just drop this entirely.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-06 18:56:44 -07:00
Jeff King 6d052d78d7 http: add HTTP_KEEP_ERROR option
We currently set curl's FAILONERROR option, which means that
any http failures are reported as curl errors, and the
http body content from the server is thrown away.

This patch introduces a new option to http_get_strbuf which
specifies that the body content from a failed http response
should be placed in the destination strbuf, where it can be
accessed by the caller.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-06 18:56:41 -07:00
Shawn Pearce 4656bf47fc Verify Content-Type from smart HTTP servers
Before parsing a suspected smart-HTTP response verify the returned
Content-Type matches the standard. This protects a client from
attempting to process a payload that smells like a smart-HTTP
server response.

JGit has been doing this check on all responses since the dawn of
time. I mistakenly failed to include it in git-core when smart HTTP
was introduced. At the time I didn't know how to get the Content-Type
from libcurl. I punted, meant to circle back and fix this, and just
plain forgot about it.

Signed-off-by: Shawn Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-04 10:22:36 -08:00
Jeff King 1960897ebc http: do not set up curl auth after a 401
When we get an http 401, we prompt for credentials and put
them in our global credential struct. We also feed them to
the curl handle that produced the 401, with the intent that
they will be used on a retry.

When the code was originally introduced in commit 42653c0,
this was a necessary step. However, since dfa1725, we always
feed our global credential into every curl handle when we
initialize the slot with get_active_slot. So every further
request already feeds the credential to curl.

Moreover, accessing the slot here is somewhat dubious. After
the slot has produced a response, we don't actually control
it any more.  If we are using curl_multi, it may even have
been re-initialized to handle a different request.

It just so happens that we will reuse the curl handle within
the slot in such a case, and that because we only keep one
global credential, it will be the one we want.  So the
current code is not buggy, but it is misleading.

By cleaning it up, we can remove the slot argument entirely
from handle_curl_result, making it much more obvious that
slots should not be accessed after they are marked as
finished.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-12 09:45:15 -07:00
Jeff King 188923f0d1 http: fix segfault in handle_curl_result
When we create an http active_request_slot, we can set its
"results" pointer back to local storage. The http code will
fill in the details of how the request went, and we can
access those details even after the slot has been cleaned
up.

Commit 8809703 (http: factor out http error code handling)
switched us from accessing our local results struct directly
to accessing it via the "results" pointer of the slot. That
means we're accessing the slot after it has been marked as
finished, defeating the whole purpose of keeping the results
storage separate.

Most of the time this doesn't matter, as finishing the slot
does not actually clean up the pointer. However, when using
curl's multi interface with the dumb-http revision walker,
we might actually start a new request before handing control
back to the original caller. In that case, we may reuse the
slot, zeroing its results pointer, and leading the original
caller to segfault while looking for its results inside the
slot.

Instead, we need to pass a pointer to our local results
storage to the handle_curl_result function, rather than
relying on the pointer in the slot struct. This matches what
the original code did before the refactoring (which did not
use a separate function, and therefore just accessed the
results struct directly).

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-12 09:42:31 -07:00
Jeff King 8809703072 http: factor out http error code handling
Most of our http requests go through the http_request()
interface, which does some nice post-processing on the
results. In particular, it handles prompting for missing
credentials as well as approving and rejecting valid or
invalid credentials. Unfortunately, it only handles GET
requests. Making it handle POSTs would be quite complex, so
let's pull result handling code into its own function so
that it can be reused from the POST code paths.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-27 10:49:09 -07:00
Jim Meyering a7793a7491 correct spelling: an URL -> a URL
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-28 08:47:23 -07:00
Junio C Hamano 1d3a035d6d Merge branch 'jk/maint-push-over-dav'
* jk/maint-push-over-dav:
  http-push: enable "proactive auth"
  t5540: test DAV push with authentication

Conflicts:
	http.c
2011-12-19 16:05:59 -08:00
Jeff King a4ddbc33d7 http-push: enable "proactive auth"
Before commit 986bbc08, git was proactive about asking for
http passwords. It assumed that if you had a username in
your URL, you would also want a password, and asked for it
before making any http requests.

However, this could interfere with the use of .netrc (see
986bbc08 for details). And it was also unnecessary, since
the http fetching code had learned to recognize an HTTP 401
and prompt the user then. Furthermore, the proactive prompt
could interfere with the usage of .netrc (see 986bbc08 for
details).

Unfortunately, the http push-over-DAV code never learned to
recognize HTTP 401, and so was broken by this change. This
patch does a quick fix of re-enabling the "proactive auth"
strategy only for http-push, leaving the dumb http fetch and
smart-http as-is.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-13 16:34:44 -08:00
Junio C Hamano c4c9a63b54 Merge branch 'mf/curl-select-fdset'
* mf/curl-select-fdset:
  http: drop "local" member from request struct
  http.c: Rely on select instead of tracking whether data was received
  http.c: Use timeout suggested by curl instead of fixed 50ms timeout
  http.c: Use curl_multi_fdset to select on curl fds instead of just sleeping
2011-12-05 15:10:28 -08:00
Jeff King 093c44a360 http: drop "local" member from request struct
This is a FILE pointer in the case that we are sending our
output to a file. We originally used it to run ftell() to
determine whether data had been written to our file during
our last call to curl. However, as of the last patch, we no
longer care about that flag anymore. All uses of this struct
member are now just book-keeping that can go away.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-11-04 12:05:01 -07:00
Mika Fischer df26c47127 http.c: Rely on select instead of tracking whether data was received
Since now select is used with the file descriptors of the http connections,
tracking whether data was received recently (and trying to read more in
that case) is no longer necessary. Instead, always call select and rely on
it to return as soon as new data can be read.

Signed-off-by: Mika Fischer <mika.fischer@zoopnet.de>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-11-04 10:47:13 -07:00
Jeff King deba49377b http_init: accept separate URL parameter
The http_init function takes a "struct remote". Part of its
initialization procedure is to look at the remote's url and
grab some auth-related parameters. However, using the url
included in the remote is:

  - wrong; the remote-curl helper may have a separate,
    unrelated URL (e.g., from remote.*.pushurl). Looking at
    the remote's configured url is incorrect.

  - incomplete; http-fetch doesn't have a remote, so passes
    NULL. So http_init never gets to see the URL we are
    actually going to use.

  - cumbersome; http-push has a similar problem to
    http-fetch, but actually builds a fake remote just to
    pass in the URL.

Instead, let's just add a separate URL parameter to
http_init, and all three callsites can pass in the
appropriate information.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-15 21:18:36 -07:00
Junio C Hamano eb4f4076aa Merge branch 'jc/zlib-wrap'
* jc/zlib-wrap:
  zlib: allow feeding more than 4GB in one go
  zlib: zlib can only process 4GB at a time
  zlib: wrap deflateBound() too
  zlib: wrap deflate side of the API
  zlib: wrap inflateInit2 used to accept only for gzip format
  zlib: wrap remaining calls to direct inflate/inflateEnd
  zlib wrapper: refactor error message formatter

Conflicts:
	sha1_file.c
2011-07-19 09:33:04 -07:00
Junio C Hamano ef49a7a012 zlib: zlib can only process 4GB at a time
The size of objects we read from the repository and data we try to put
into the repository are represented in "unsigned long", so that on larger
architectures we can handle objects that weigh more than 4GB.

But the interface defined in zlib.h to communicate with inflate/deflate
limits avail_in (how many bytes of input are we calling zlib with) and
avail_out (how many bytes of output from zlib are we ready to accept)
fields effectively to 4GB by defining their type to be uInt.

In many places in our code, we allocate a large buffer (e.g. mmap'ing a
large loose object file) and tell zlib its size by assigning the size to
avail_in field of the stream, but that will truncate the high octets of
the real size. The worst part of this story is that we often pass around
z_stream (the state object used by zlib) to keep track of the number of
used bytes in input/output buffer by inspecting these two fields, which
practically limits our callchain to the same 4GB limit.

Wrap z_stream in another structure git_zstream that can express avail_in
and avail_out in unsigned long. For now, just die() when the caller gives
a size that cannot be given to a single zlib call. In later patches in the
series, we would make git_inflate() and git_deflate() internally loop to
give callers an illusion that our "improved" version of zlib interface can
operate on a buffer larger than 4GB in one go.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-10 11:52:15 -07:00
Dan McGee a04ff3ec32 http: make curl callbacks match contracts from curl header
Yes, these don't match perfectly with the void* first parameter of the
fread/fwrite in the standard library, but they do match the curl
expected method signature. This is needed when a refactor passes a
curl_write_callback around, which would otherwise give incorrect
parameter warnings.

Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-04 13:30:28 -07:00
Jonathan Nieder 9cba13ca5d standardize brace placement in struct definitions
In a struct definitions, unlike functions, the prevailing style is for
the opening brace to go on the same line as the struct name, like so:

 struct foo {
	int bar;
	char *baz;
 };

Indeed, grepping for 'struct [a-z_]* {$' yields about 5 times as many
matches as 'struct [a-z_]*$'.

Linus sayeth:

 Heretic people all over the world have claimed that this inconsistency
 is ...  well ...  inconsistent, but all right-thinking people know that
 (a) K&R are _right_ and (b) K&R are right.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-16 12:49:02 -07:00
Tay Ray Chuan 1966d9f37b shift end_url_with_slash() from http.[ch] to url.[ch]
This allows non-http/curl users to access it too (eg. http-backend.c).

Update include headers in end_url_with_slash() users too.

Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-26 14:50:45 -08:00
Jonathan Nieder 987460611a Standardize do { ... } while (0) style
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-12 15:44:51 -07:00
Junio C Hamano 035bf8d7c4 Merge branch 'sp/maint-dumb-http-pack-reidx'
* sp/maint-dumb-http-pack-reidx:
  http.c::new_http_pack_request: do away with the temp variable filename
  http-fetch: Use temporary files for pack-*.idx until verified
  http-fetch: Use index-pack rather than verify-pack to check packs
  Allow parse_pack_index on temporary files
  Extract verify_pack_index for reuse from verify_pack
  Introduce close_pack_index to permit replacement
  http.c: Remove unnecessary strdup of sha1_to_hex result
  http.c: Don't store destination name in request structures
  http.c: Drop useless != NULL test in finish_http_pack_request
  http.c: Tiny refactoring of finish_http_pack_request
  t5550-http-fetch: Use subshell for repository operations
  http.c: Remove bad free of static block
2010-05-21 04:02:19 -07:00
Junio C Hamano 3cc9caadf7 Merge branch 'rc/maint-curl-helper'
* rc/maint-curl-helper:
  remote-curl: ensure that URLs have a trailing slash
  http: make end_url_with_slash() public
  t5541-http-push: add test for URLs with trailing slash

Conflicts:
	remote-curl.c
2010-05-08 22:37:24 -07:00
Shawn O. Pearce 0da8b2e7c8 http.c: Don't store destination name in request structures
The destination name within the object store is easily computed
on demand, reusing a static buffer held by sha1_file.c.  We don't
need to copy the entire path into the request structure for safe
keeping, when it can be easily reformatted after the download has
been completed.

This reduces the size of the per-request structure, and removes
yet another PATH_MAX based limit.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-17 13:55:46 -07:00
Tay Ray Chuan eb9d47cf9b http: make end_url_with_slash() public
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-09 21:11:09 -07:00
Scott Chacon 42653c09c8 Prompt for a username when an HTTP request 401s
When an HTTP request returns a 401, Git will currently fail with a
confusing message saying that it got a 401, which is not very
descriptive.

Currently if a user wants to use Git over HTTP, they have to use one
URL with the username in the URL (e.g. "http://user@host.com/repo.git")
for write access and another without the username for unauthenticated
read access (unless they want to be prompted for the password each
time). However, since the HTTP servers will return a 401 if an action
requires authentication, we can prompt for username and password if we
see this, allowing us to use a single URL for both purposes.

This patch changes http_request to prompt for the username and password,
then return HTTP_REAUTH so http_get_strbuf can try again.  If it gets
a 401 even when a user/pass is supplied, http_request will now return
HTTP_NOAUTH which remote_curl can then use to display a more
intelligent error message that is less confusing.

Signed-off-by: Scott Chacon <schacon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-01 23:24:59 -07:00
Junio C Hamano 83e41e2e61 http.c: mark file-local functions static
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-12 01:06:08 -08:00
Shawn O. Pearce de1a2fdd38 Smart push over HTTP: client side
The git-remote-curl backend detects if the remote server supports
the git-receive-pack service, and if so, runs git-send-pack in a
pipe to dump the command and pack data as a single POST request.

The advertisements from the server that were obtained during the
discovery are passed into git-send-pack before the POST request
starts.  This permits git-send-pack to operate largely unmodified.

For smaller packs (those under 1 MiB) a HTTP/1.0 POST with a
Content-Length is used, permitting interaction with any server.
The 1 MiB limit is arbitrary, but is sufficent to fit most deltas
created by human authors against text sources with the occasional
small binary file (e.g. few KiB icon image).  The configuration
option http.postBuffer can be used to increase (or shink) this
buffer if the default is not sufficient.

For larger packs which cannot be spooled entirely into the helper's
memory space (due to http.postBuffer being too small), the POST
request requires HTTP/1.1 and sets "Transfer-Encoding: chunked".
This permits the client to upload an unknown amount of data in one
HTTP transaction without needing to pregenerate the entire pack
file locally.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-04 17:58:15 -08:00
Tay Ray Chuan 5424bc557f http*: add helper methods for fetching objects (loose)
The code handling the fetching of loose objects in http-push.c and
http-walker.c have been refactored into new methods and a new struct
(object_http_request) in http.c. They are not meant to be invoked
elsewhere.

The new methods in http.c are
 - new_http_object_request
 - process_http_object_request
 - finish_http_object_request
 - abort_http_object_request
 - release_http_object_request

and the new struct is http_object_request.

RANGER_HEADER_SIZE and no_pragma_header is no longer made available
outside of http.c, since after the above changes, there are no other
instances of usage outside of http.c.

Remove members of the transfer_request struct in http-push.c and
http-walker.c, including filename, real_sha1 and zret, as they are used
no longer used.

Move the methods append_remote_object_url() and get_remote_object_url()
from http-push.c to http.c. Additionally, get_remote_object_url() is no
longer defined only when USE_CURL_MULTI is defined, since
non-USE_CURL_MULTI code in http.c uses it (namely, in
new_http_object_request()).

Refactor code from http-push.c::start_fetch_loose() and
http-walker.c::start_object_fetch_request() that deals with the details
of coming up with the filename to store the retrieved object, resuming
a previously aborted request, and making a new curl request, into a new
function, new_http_object_request().

Refactor code from http-walker.c::process_object_request() into the
function, process_http_object_request().

Refactor code from http-push.c::finish_request() and
http-walker.c::finish_object_request() into a new function,
finish_http_object_request(). It returns the result of the
move_temp_to_file() invocation.

Add a function, release_http_object_request(), which cleans up object
request data. http-push.c and http-walker.c invoke this function
separately; http-push.c::release_request() and
http-walker.c::release_object_request() do not invoke this function.

Add a function, abort_http_object_request(), which unlink()s the object
file and invokes release_http_object_request(). Update
http-walker.c::abort_object_request() to use this.

Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 11:03:11 -07:00
Tay Ray Chuan 2264dfa5c4 http*: add helper methods for fetching packs
The code handling the fetching of packs in http-push.c and
http-walker.c have been refactored into new methods and a new struct
(http_pack_request) in http.c. They are not meant to be invoked
elsewhere.

The new methods in http.c are
 - new_http_pack_request
 - finish_http_pack_request
 - release_http_pack_request

and the new struct is http_pack_request.

Add a function, new_http_pack_request(), that deals with the details of
coming up with the filename to store the retrieved packfile, resuming a
previously aborted request, and making a new curl request. Update
http-push.c::start_fetch_packed() and http-walker.c::fetch_pack() to
use this.

Add a function, finish_http_pack_request(), that deals with renaming
the pack, advancing the pack list, and installing the pack. Update
http-push.c::finish_request() and http-walker.c::fetch_pack to use
this.

Update release_request() in http-push.c and http-walker.c to invoke
release_http_pack_request() to clean up pack request helper data.

The local_stream member of the transfer_request struct in http-push.c
has been removed, as the packfile pointer will be managed in the struct
http_pack_request.

Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 11:03:11 -07:00
Tay Ray Chuan b8caac2b8a http*: add http_get_info_packs
http-push.c and http-walker.c no longer have to use fetch_index or
setup_index; they simply need to use http_get_info_packs, a new http
method, in their fetch_indices implementations.

Move fetch_index() and rename to fetch_pack_index() in http.c; this
method is not meant to be used outside of http.c. It invokes
end_url_with_slash with base_url; apart from that change, the code is
identical.

Move setup_index() and rename to fetch_and_setup_pack_index() in
http.c; this method is not meant to be used outside of http.c.

Do not immediately set ret to 0 in http-walker.c::fetch_indices();
instead do it in the HTTP_MISSING_TARGET case, to make it clear that
the HTTP_OK and HTTP_MISSING_TARGET cases both return 0.

Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 11:03:11 -07:00
Mike Hommey e929cd20bb http.c: new functions for the http API
The new functions added are:
 - http_request() (internal function)
 - http_get_strbuf()
 - http_get_file()
 - http_error()

http_get_strbuf and http_get_file allow respectively to retrieve contents of
an URL to a strbuf or an opened file handle.

http_error prints out an error message containing the URL and the curl error
(in curl_errorstr).

Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 10:56:27 -07:00
Tay Ray Chuan e917674597 http*: move common variables and macros to http.[ch]
Move RANGE_HEADER_SIZE to http.h.

Create no_pragma_header, the curl header list containing the header
"Pragma:" in http.[ch]. It is allocated in http_init, and freed in
http_cleanup. This replaces the no_pragma_header in http-push.c, and
the no_pragma_header member in walker_data in http-walker.c.

Create http_is_verbose. It is to be used by methods in http.c, and is
modified at the entry points of http.c's users, namely http-push.c
(when parsing options) and http-walker.c (in get_http_walker).

Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 10:56:27 -07:00
Martin Storsjö 3944ba0cb0 Allow curl to rewind the read buffers
When using multi-pass authentication methods, the curl library may
need to rewind the read buffers (depending on how much already has
been fed to the server) used for providing data to HTTP PUT, POST or
PROPFIND, and in order to allow the library to do so, we need to tell
it how by providing either an ioctl callback or a seek callback.

This patch adds an ioctl callback, which should be usable on older
curl versions (since 7.12.3) than the seek callback (introduced in
curl 7.18.0).

Some HTTP servers (such as Apache) give an 401 error reply immediately
after receiving the headers (so no data has been read from the read
buffers, and thus no rewinding is needed), but other servers (such
as Lighttpd) only replies after the whole request has been sent and
all data has been read from the read buffers, making rewinding necessary.

Signed-off-by: Martin Storsjo <martin@martin.st>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-02 13:04:07 -07:00
Junio C Hamano f444e5286e Work around gcc warnings from curl headers
After master.k.org upgrade, I started seeing these warning messages:

    transport.c: In function 'get_refs_via_curl':
    transport.c:458: error: call to '_curl_easy_setopt_err_write_callback' declared with attribute warning: curl_easy_setopt expects a curl_write_callback argument for this option

It appears that the curl header wants to enforce the function signature
for callback function given to curl_easy_setopt() to be compatible with
that of (*curl_write_callback) or fwrite.  This patch seems to work the
issue around.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-04 00:37:40 -07:00
Daniel Barkalow c13b2633f4 Make walker.fetch_ref() take a struct ref.
This simplifies a few things, makes a few things slightly more
complicated, but, more importantly, allows that, when struct ref can
represent a symref, http_fetch_ref() can return one.

Incidentally makes the string that http_fetch_ref() gets include "refs/"
(if appropriate), because that's how the name field of struct ref works.
As far as I can tell, the usage in walker:interpret_target() wouldn't have
worked previously, if it ever would have been used, which it wouldn't
(since the fetch process uses the hash instead of the name of the ref
there).

Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-26 17:36:17 -07:00
Mike Hommey 9fc6440d78 Set proxy override with http_init()
In transport.c, proxy setting (the one from the remote conf) was set through
curl_easy_setopt() call, while http.c already does the same with the
http.proxy setting. We now just use this infrastructure instead, and make
http_init() now take the struct remote as argument so that it can take the
http_proxy setting from there, and any other property that would be added
later.

At the same time, we make get_http_walker() take a struct remote argument
too, and pass it to http_init(), which makes remote defined proxy be used
for more than get_refs_via_curl().

We leave out http-fetch and http-push, which don't use remotes for the
moment, purposefully.

Signed-off-by: Mike Hommey <mh@glandium.org>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-27 15:37:57 -08:00
Junio C Hamano 4f5f998fbd Clarify that http-push being temporarily disabled with older cURL
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-22 00:48:29 -08:00
Mike Hommey d7e92806cd Move fetch_ref from http-push.c and http-walker.c to http.c
Make the necessary changes to be ok with their difference, and rename the
function http_fetch_ref.

Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-14 21:31:59 -08:00