Граф коммитов

19 Коммитов

Автор SHA1 Сообщение Дата
Jeff King 6e454b9a31 clear parsed flag when we free tree buffers
Many code paths will free a tree object's buffer and set it
to NULL after finishing with it in order to keep memory
usage down during a traversal. However, out of 8 sites that
do this, only one actually unsets the "parsed" flag back.
Those sites that don't are setting a trap for later users of
the tree object; even after calling parse_tree, the buffer
will remain NULL, causing potential segfaults.

It is not known whether this is triggerable in the current
code. Most commands do not do an in-memory traversal
followed by actually using the objects again. However, it
does not hurt to be safe for future callers.

In most cases, we can abstract this out to a
"free_tree_buffer" helper. However, there are two
exceptions:

  1. The fsck code relies on the parsed flag to know that we
     were able to parse the object at one point. We can
     switch this to using a flag in the "flags" field.

  2. The index-pack code sets the buffer to NULL but does
     not free it (it is freed by a caller). We should still
     unset the parsed flag here, but we cannot use our
     helper, as we do not want to free the buffer.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-06 10:29:12 -07:00
Jeff King f7892d1817 use parse_object_or_die instead of die("bad object")
Some call-sites do:

  o = parse_object(sha1);
  if (!o)
	  die("bad object %s", some_name);

We can now handle that as a one-liner, and get more
consistent output.

In the third case of this patch, it looks like we are losing
information, as the existing message also outputs the sha1
hex; however, parse_object will already have written a more
specific complaint about the sha1, so there is no point in
repeating it here.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-17 12:52:14 -07:00
Jeff King 0b26abc0f5 reachable: per-object progress
The current progress code really just counts commits.
This patch makes it count all objects, giving us a "total"
count close to what a repack would show. This is nice when
using "git gc", which will usually have just repacked the
whole repo.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-11-07 22:12:19 -08:00
Nguyễn Thái Ngọc Duy dc347195cc prune: show progress while marking reachable objects
prune already shows progress meter while pruning. The marking part may
take a few seconds or more, depending on repository size. Show
progress meter during this time too.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-11-07 22:12:19 -08:00
Johannes Schindelin c0aa335c95 Remove unused variables
Noticed by gcc 4.6.0.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-22 11:43:27 -07:00
Thiago Farina 3cd474599f object.h: Add OBJECT_ARRAY_INIT macro and make use of it.
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-29 22:42:49 -07:00
Björn Steinbrink de551d472e process_{tree,blob}: Remove useless xstrdup calls
The name of the processed object was duplicated for passing it to
add_object(), but that already calls path_name, which allocates a new
string anyway. So the memory allocated by the xstrdup calls just went
nowhere, leaking memory.

This reduces the RSS usage for a "rev-list --all --objects" by about 10% on
the gentoo repo (fully packed) as well as linux-2.6.git:

    gentoo:
                    | old           | new
    ----------------|-------------------------------
    RSS             |       1537284 |       1388408
    VSZ             |       1816852 |       1667952
    time elapsed    |       1:49.62 |       1:48.99
    min. page faults|        417178 |        379919

    linux-2.6.git:
                    | old           | new
    ----------------|-------------------------------
    RSS             |        324452 |        292996
    VSZ             |        491792 |        460376
    time elapsed    |       0:14.53 |       0:14.28
    min. page faults|         89360 |         81613

Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-08 22:58:43 -07:00
Junio C Hamano ee4f06c0a6 Merge branch 'mk/maint-parse-careful'
* mk/maint-parse-careful:
  peel_onion: handle NULL
  check return value from parse_commit() in various functions
  parse_commit: don't fail, if object is NULL
  revision.c: handle tag->tagged == NULL
  reachable.c::process_tree/blob: check for NULL
  process_tag: handle tag->tagged == NULL
  check results of parse_commit in merge_bases
  list-objects.c::process_tree/blob: check for NULL
  reachable.c::add_one_tree: handle NULL from lookup_tree
  mark_blob/tree_uninteresting: check for NULL
  get_sha1_oneline: check return value of parse_object
  read_object_with_reference: don't read beyond the buffer
2008-02-18 20:56:01 -08:00
Martin Koegler f7de5a56b7 reachable.c::process_tree/blob: check for NULL
As these functions are directly called with the result
from lookup_tree/blob, they must handle NULL.

Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-18 19:25:26 -08:00
Martin Koegler cc36934791 process_tag: handle tag->tagged == NULL
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-18 19:25:26 -08:00
Martin Koegler c34066358a reachable.c::add_one_tree: handle NULL from lookup_tree
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-18 19:25:22 -08:00
Martin Koegler 3d51e1b5b8 check return code of prepare_revision_walk
A failure in prepare_revision_walk can be caused by
a not parseable object.

Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-17 23:51:12 -08:00
Linus Torvalds 7a51ed66f6 Make on-disk index representation separate from in-core one
This converts the index explicitly on read and write to its on-disk
format, allowing the in-core format to contain more flags, and be
simpler.

In particular, the in-core format is now host-endian (as opposed to the
on-disk one that is network endian in order to be able to be shared
across machines) and as a result we can dispense with all the
htonl/ntohl on accesses to the cache_entry fields.

This will make it easier to make use of various temporary flags that do
not exist in the on-disk format.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-21 12:44:31 -08:00
Junio C Hamano b941ffac50 Merge branch 'maint'
* maint:
  Make git-prune submodule aware (and fix a SEGFAULT in the process)
2007-07-02 17:12:48 -07:00
Andy Parkins 8d2244ba74 Make git-prune submodule aware (and fix a SEGFAULT in the process)
I ran git-prune on a repository and got this:

 $ git-prune
 error: Object 228f8065b930120e35fc0c154c237487ab02d64a is a blob, not a commit
 Segmentation fault (core dumped)

This repository was a strange one in that it was being used to provide
its own submodule.  That is, the repository was cloned into a
subdirectory, an independent branch checked out in that subdirectory,
and then it was marked as a submodule.  git-prune then failed in the
above manner.

The problem was that git-prune was not submodule aware in two areas.

Linus said:

 > So what happens is that something traverses a tree object, looks at each
 > entry, sees that it's not a tree, and tries to look it up as a blob. But
 > subprojects are commits, not blobs, and then when you look at the object
 > more closely, you get the above kind of object type confusion.

and included a patch to add an S_ISGITLINK() test to reachable.c's
process_tree() function.  That fixed the first git-prune error, and
stopped it from trying to process the gitlink entries in trees as if
they were pointers to other trees (and of course failing, because
gitlinks _aren't_ trees).  That part of this patch is his.

The second area is add_cache_refs().  This is called before starting the
reachability analysis, and was calling lookup_blob() on every object
hash found in the index.  However, it is no longer true that every hash
in the index is a pointer to a blob, some of them are gitlinks, and are
not backed by any object at all, they are commits in another repository.
Normally this bug was not causing any problems, but in the case of the
self-referencing repository described above, it meant that the gitlink
hash was being marked as being of type OBJ_BLOB by add_cache_refs() call
to lookup_blob().  Then later, because that hash was also pointed to by
a ref, add_one_ref() would treat it as a commit; lookup_commit() would
return a NULL because that object was already noted as being an
OBJ_BLOB, not an OBJ_COMMIT; and parse_commit_buffer() would SEGFAULT on
that NULL pointer.

The fix made by this patch is to not blindly call lookup_blob() in
reachable.c's add_cache_refs(), and instead skip any index entries that
are S_ISGITLINK().

Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02 16:41:18 -07:00
Linus Torvalds 6fda5e5180 Initialize tree descriptors with a helper function rather than by hand.
This removes slightly more lines than it adds, but the real reason for
doing this is that future optimizations will require more setup of the
tree descriptor, and so we want to do it in one place.

Also renamed the "desc.buf" field to "desc.buffer" just to trigger
compiler errors for old-style manual initializations, making sure I
didn't miss anything.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-21 10:21:57 -07:00
Nicolas Pitre eb8381c885 scan reflogs independently from refs
Currently, the search for all reflogs depends on the existence of
corresponding refs under the .git/refs/ directory.  Let's scan the
.git/logs/ directory directly instead.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-03 11:57:18 -08:00
Johannes Schindelin 883d60fa97 Sanitize for_each_reflog_ent()
It used to ignore the return value of the helper function; now, it
expects it to return 0, and stops iteration upon non-zero return
values; this value is then passed on as the return value of
for_each_reflog_ent().

Further, it makes no sense to force the parsing upon the helper
functions; for_each_reflog_ent() now calls the helper function with
old and new sha1, the email, the timestamp & timezone, and the message.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-09 03:04:04 -08:00
Junio C Hamano 94421474e0 Move traversal of reachable objects into a separate library.
This moves major part of builtin-prune into a separate file,
reachable.c.  It is used to mark the objects that are reachable
from refs, and optionally from reflogs.

The patch looks very large, but if you look at it with diff -C,
which this message is formatted in, most of them are copied
lines and there are very little additions.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-06 22:57:34 -08:00