Carefully excluding t1309, which sees independent development elsewhere
at the time of writing, we transition above-mentioned tests to the
default branch name `main`. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -e 's/naster/nain/g' -- t[01]*.sh &&
git checkout HEAD -- t1309\*)
Note that t5533 contains a variation of the name `master` (`naster`)
that we rename here, too.
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use $ZERO_OID to make the test hash independent.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behaviour of "sparse-checkout" in the state "git clone
--no-checkout" left was changed accidentally in 2.27, which has
been corrected.
* en/sparse-checkout:
sparse-checkout: avoid staging deletions of all files
sparse-checkout's purpose is to update the working tree to have it
reflect a subset of the tracked files. As such, it shouldn't be
switching branches, making commits, downloading or uploading data, or
staging or unstaging changes. Other than updating the worktree, the
only thing sparse-checkout should touch is the SKIP_WORKTREE bit of the
index. In particular, this sets up a nice invariant: running
sparse-checkout will never change the status of any file in `git status`
(reflecting the fact that we only set the SKIP_WORKTREE bit if the file
is safe to delete, i.e. if the file is unmodified).
Traditionally, we did a _really_ bad job with this goal. The
predecessor to sparse-checkout involved manual editing of
.git/info/sparse-checkout and running `git read-tree -mu HEAD`. That
command would stage and unstage changes and overwrite dirty changes in
the working tree.
The initial implementation of the sparse-checkout command was no better;
it simply invoked `git read-tree -mu HEAD` as a subprocess and had the
same caveats, though this issue came up repeatedly in review comments
and workarounds for the problems were put in place before the feature
was merged[1, 2, 3, 4, 5, 6; especially see 4 & 6].
[1] https://lore.kernel.org/git/CABPp-BFT9A5n=_bx5LsjCvbogqwSjiwgr5amcjgbU1iAk4KLJg@mail.gmail.com/
[2] https://lore.kernel.org/git/CABPp-BEmwSwg4tgJg6nVG8a3Hpn_g-=ZjApZF4EiJO+qVgu4uw@mail.gmail.com/
[3] https://lore.kernel.org/git/CABPp-BFV7TA0qwZCQpHCqx9N+JifyRyuBQ-pZ_oGfe-NOgyh7A@mail.gmail.com/
[4] https://lore.kernel.org/git/CABPp-BHYCCD+Vx5fq35jH82eHc1-P53Lz_aGNpHJNcx9kg2K-A@mail.gmail.com/
[5] https://lore.kernel.org/git/CABPp-BF+JWYZfDqp2Tn4AEKVp4b0YMA=Mbz4Nz62D-gGgiduYQ@mail.gmail.com/
[6] https://lore.kernel.org/git/20191121163706.GV23183@szeder.dev/
However, these workarounds, in addition to disabling the feature in a
number of important cases, also missed one special case. I'll get back
to it later.
In the 2.27.0 cycle, the disabling of the feature was lifted by finally
replacing the internal equivalent of `git read-tree -mu HEAD` with
something that did what we wanted: the new update_sparsity() function in
unpack-trees.c that only ever updates SKIP_WORKTREE bits in the index
and updates the working tree to match. This new function handles all
the cases that were problematic for the old implementation, except that
it breaks the same special case that avoided the workarounds of the old
implementation, but broke it in a different way.
So...that brings us to the special case: a git clone performed with
--no-checkout. As per the meaning of the flag, --no-checkout does not
check out any branch, with the implication that you aren't on one and
need to switch to one after the clone. Implementationally, HEAD is
still set (so in some sense you are partially on a branch), but
* the index is "unborn" (non-existent)
* there are no files in the working tree (other than .git/)
* the next time git switch (or git checkout) is run it will run
unpack_trees with `initial_checkout` flag set to true.
It is not until you run, e.g. `git switch <somebranch>` that the index
will be written and files in the working tree populated.
With this special --no-checkout case, the traditional `read-tree -mu
HEAD` behavior would have done the equivalent of acting like checkout --
switch to the default branch (HEAD), write out an index that matches
HEAD, and update the working tree to match. This special case slipped
through the avoid-making-changes checks in the original sparse-checkout
command and thus continued there.
After update_sparsity() was introduced and used (see commit f56f31af03
("sparse-checkout: use new update_sparsity() function", 2020-03-27)),
the behavior for the --no-checkout case changed: Due to git's
auto-vivification of an empty in-memory index (see do_read_index() and
note that `must_exist` is false), and due to sparse-checkout's
update_working_directory() code to always write out the index after it
was done, we got a new bug. That made it so that sparse-checkout would
switch the repository from a clone with an "unborn" index (i.e. still
needing an initial_checkout), to one that had a recorded index with no
entries. Thus, instead of all the files appearing deleted in `git
status` being known to git as a special artifact of not yet being on a
branch, our recording of an empty index made it suddenly look to git as
though it was definitely on a branch with ALL files staged for deletion!
A subsequent checkout or switch then had to contend with the fact that
it wasn't on an initial_checkout but had a bunch of staged deletions.
Make sure that sparse-checkout changes nothing in the index other than
the SKIP_WORKTREE bit; in particular, when the index is unborn we do not
have any branch checked out so there is no sparsification or
de-sparsification work to do. Simply return from
update_working_directory() early.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the error condition when updating the sparse-checkout leaves
an empty working directory.
This behavior was added in 9e1afb167 (sparse checkout: inhibit empty
worktree, 2009-08-20). The comment was added in a7bc906f2 (Add
explanation why we do not allow to sparse checkout to empty working
tree, 2011-09-22) in response to a "dubious" comment in 84563a624
(unpack-trees.c: cosmetic fix, 2010-12-22).
With the recent "cone mode" and "git sparse-checkout init [--cone]"
command, it is common to set a reasonable sparse-checkout pattern
set of
/*
!/*/
which matches only files at root. If the repository has no such files,
then their "git sparse-checkout init" command will fail.
Now that we expect this to be a common pattern, we should not have the
commands fail on an empty working directory. If it is a confusing
result, then the user can recover with "git sparse-checkout disable"
or "git sparse-checkout set". This is especially simple when using cone
mode.
Reported-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If commands like merge or rebase materialize files as part of their work,
or a previous sparse-checkout command failed to update individual files
due to dirty changes, users may want a command to simply 'reapply' the
sparsity rules. Provide one.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When sparse-checkout runs to update the list of sparsity patterns, it
gives warnings if it can't remove paths from the working tree because
those files have dirty changes. Add a similar warning for unmerged
paths as well.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The messages for problems with sparse paths are phrased as errors that
cause the operation to abort, even though we are not making the
operation abort. Reword the messages to make sense in their new
context.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
display_error_msgs() is never called to show messages of both ERROR_*
and WARNING_* types at the same time; it is instead called multiple
times, separately for each type. Since we want to display these types
differently, make two slightly different versions of this function.
A subsequent commit will further modify unpack_trees() and how it calls
the new display_warning_msgs().
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup_unpack_trees_porcelain() provides much improved error/warning
messages; instead of a message that assumes that there is only one path
with a given problem despite being used by code that intentionally is
grouping and showing errors together, it uses a message designed to be
used with groups of paths. For example, this transforms
error: Entry ' folder1/a
folder2/a
' not uptodate. Cannot update sparse checkout.
into
error: Cannot update sparse checkout: the following entries are not up to date:
folder1/a
folder2/a
In the past the suboptimal messages were never actually triggered
because we would error out if the working directory wasn't clean before
we even called unpack_trees(). The previous commit changed that,
though, so let's use the better error messages.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the equivalent of 'git read-tree -mu HEAD' in the sparse-checkout
codepaths for setting the SKIP_WORKTREE bits and instead use the new
update_sparsity() function.
Note that when an issue is hit, the error message splits 'error' and
'Cannot update sparse checkout' on separate lines. For now, we use two
greps to find both pieces of the error message but subsequent commits
will clean up the messages reported to the user.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We grep for "File exists" in stderr of the failing `git sparse-checkout`
to make sure that it failed for the right reason. We expect the string
to show up there since we call `strerror(errno)` in
`unable_to_lock_message()` in lockfile.c.
On the NonStop platform, this fails because the error string is "File
already exists", which doesn't match our grepping.
See 9042140097 ("test-dir-iterator: do not assume errno values",
2019-07-30) for a somewhat similar fix. There, we patched a test helper,
which meant we had access to `errno` and could investigate it better in
the test helper instead of just outputting the numerical value and
evaluating it in the test script. The current situation is different,
since (short of modifying the lockfile machinery, e.g., to be more
verbose) we don't have more than the output from `strerror()` available.
Except we do: We prefix `strerror(errno)` with `_("Unable to create
'%s.lock': ")`. Let's grep for that part instead. It verifies that we
were indeed unable to create the lock file. (If that fails for some
other reason than the file existing, we really really should expect
other tests to fail as well.)
An alternative fix would be to loosen the expression a bit and grep for
"File.* exists" instead. There would be no guarantee that some other
implementation couldn't come up with another error string, That is, that
could be the first move in an endless game of whack-a-mole. Of course,
it could also take us from "99" to "100" percent of the platforms and
we'd never have this problem again. But since we have another way of
addressing this, let's not even try the "loosen it up a bit" strategy.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 9e6d3e64 (sparse-checkout: detect short patterns, 2020-01-24), a
condition on the minimum length of a cone-mode pattern was introduced.
However, this condition was off-by-one.
If we have a directory with a single character, say "b", then the
command
git sparse-checkout set b
will correctly add the pattern "/b/" to the sparse-checkout file. When
this is interpeted in dir.c, the pattern is "/b" with the
PATTERN_FLAG_MUSTBEDIR flag. This string has length two, which satisfies
our inclusive inequality (<= 2).
The reason for this inequality is that we will start to read the pattern
string character-by-character using three char pointers: prev, cur,
next. In particular, next is set to the current pattern plus two. The
mistake was that next will still be a valid pointer when the pattern
length is two, since the string is null-terminated.
Make this inequality strict so these patterns work.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using Windows, a user may run 'git sparse-checkout set A\B\C'
to add the Unix-style path A/B/C to their sparse-checkout patterns.
Normalizing the input path converts the backslashes to slashes before we
add the string 'A/B/C' to the recursive hashset.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the sparse-checkout feature, a user may want to incrementally
grow their sparse-checkout pattern set. Allow adding patterns using a
new 'add' subcommand. This is not much different from the 'set'
subcommand, because we still want to allow the '--stdin' option and
interpret inputs as directories when in cone mode and patterns
otherwise.
When in cone mode, we are growing the cone. This may actually reduce the
set of patterns when adding directory A when A/B is already a directory
in the cone. Test the different cases: siblings, parents, ancestors.
When not in cone mode, we can only assume the patterns should be
appended to the sparse-checkout file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The intention of the special "cone mode" in the sparse-checkout
feature is to always match the same patterns that are matched by the
same sparse-checkout file as when cone mode is disabled.
When a file path is given to "git sparse-checkout set" in cone mode,
then the cone mode improperly matches the file as a recursive path.
When setting the skip-worktree bits, files were not expecting the
MATCHED_RECURSIVE response, and hence these were left out of the
matched cone.
Fix this bug by checking for MATCHED_RECURSIVE in addition to MATCHED
and add a test that prevents regression.
Reported-by: Finn Bryant <finnbryant@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout patterns allow special globs according to
fnmatch(3). When writing cone-mode patterns for paths containing
these characters, they must be escaped.
Use is_glob_special() to check which characters must be escaped
this way, and add a path to the tests that contains all glob
characters at once. Note that ']' is not special, since the
initial bracket '[' is escaped.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When in cone mode, the 'git sparse-checkout list' subcommand lists
the directories included in the sparse cone. When these directories
contain odd characters, such as a backslash, then we need to use
C-style quotes similar to 'git ls-tree'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user somehow creates a directory with an asterisk (*) or backslash
(\), then the "git sparse-checkout set" command will struggle to provide
the correct pattern in the sparse-checkout file. When not in cone mode,
the provided pattern is written directly into the sparse-checkout file.
However, in cone mode we expect a list of paths to directories and then
we convert those into patterns.
Even more specifically, the goal is to always allow the following from
the root of a repo:
git ls-tree --name-only -d HEAD | git sparse-checkout set --stdin
The ls-tree command provides directory names with an unescaped asterisk.
It also quotes the directories that contain an escaped backslash. We
must remove these quotes, then keep the escaped backslashes.
Use unquote_c_style() when parsing lines from stdin. Command-line
arguments will be parsed as-is, assuming the user can do the correct
level of escaping from their environment to match the exact directory
names.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user somehow creates a directory with an asterisk (*) or backslash
(\), then the "git sparse-checkout set" command will struggle to provide
the correct pattern in the sparse-checkout file. When not in cone mode,
the provided pattern is written directly into the sparse-checkout file.
However, in cone mode we expect a list of paths to directories and then
we convert those into patterns.
However, there is some care needed for the timing of these escapes. The
in-memory pattern list is used to update the working directory before
writing the patterns to disk. Thus, we need the command to have the
unescaped names in the hashsets for the cone comparisons, then escape
the patterns later.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cone mode, the sparse-checkout feature uses hashset containment
queries to match paths. Make this algorithm respect escaped asterisk
(*) and backslash (\) characters.
Create dup_and_filter_pattern() method to convert a pattern by
removing escape characters and dropping an optional "/*" at the end.
This method is available in dir.h as we will use it in
builtin/sparse-checkout.c in a later change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cone mode, the sparse-checkout commmand will write patterns that
allow faster pattern matching. This matching only works if the patterns
in the sparse-checkout file are those written by that command. Users
can edit the sparse-checkout file and create patterns that cause the
cone mode matching to fail.
The cone mode patterns may end in "/*" but otherwise an un-escaped
asterisk or other glob character is invalid. Add checks to disable
cone mode when seeing these values.
A later change will properly handle escaped globs.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cone mode, the shortest pattern the sparse-checkout command will
write into the sparse-checkout file is "/*". This is handled carefully
in add_pattern_to_hashsets(), so warn if any other pattern is this
short. This will assist future pattern checks by allowing us to assume
there are at least three characters in the pattern.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When core.sparseCheckoutCone is enabled, the 'git sparse-checkout set'
command creates a restricted set of possible patterns that are used
by a custom algorithm to quickly match those patterns.
If a user manually edits the sparse-checkout file, then they could
create patterns that do not match these expectations. The cone-mode
matching algorithm can return incorrect results. The solution is to
detect these incorrect patterns, warn that we do not recognize them,
and revert to the standard algorithm.
Check each pattern for the "**" substring, and revert to the old
logic if seen. While technically a "/<dir>/**" pattern matches
the meaning of "/<dir>/", it is not one that would be written by
the sparse-checkout builtin in cone mode. Attempting to accept that
pattern change complicates the logic and instead we punt and do
not accept any instance of "**".
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --sparse option was added to the clone builtin in d89f09c (clone:
add --sparse mode, 2019-11-21) and was tested with a local path clone
in t1091-sparse-checkout-builtin.sh. However, due to a difference in
how local paths are handled versus URLs, this mechanism does not work
with URLs.
Modify the test to use a "file://" URL, which would output this error
before the code change:
Cloning into 'clone'...
fatal: cannot change to 'file://.../repo': No such file or directory
error: failed to initialize sparse-checkout
These errors are due to using a "-C <path>" option to call 'git -C
<path> sparse-checkout init' but the URL is being given instead of
the target directory.
Update that target directory to evaluate this correctly. I have also
manually tested that https:// URLs are handled correctly as well.
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git init' command creates the ".git/info" directory and fills it
with some default files. However, 'git worktree add' does not create
the info directory for that worktree. This causes a problem when running
"git sparse-checkout init" inside a worktree. While care was taken to
allow the sparse-checkout config to be specific to a worktree, this
initialization was untested.
Safely create the leading directories for the sparse-checkout file. This
is the safest thing to do even without worktrees, as a user could delete
their ".git/info" directory and expect Git to recover safely.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t1091-sparse-checkout-builtin.sh uses here-docs to populate the
expected contents of the sparse-checkout file. These do not use
shell interpolation, so use "-\EOF" instead of "-EOF". Also use
proper tabbing.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When testing the sparse-checkout feature, we need to compare the
contents of the working-directory against some expected output.
Using here-docs was useful in the beginning, but became repetetive
as the test script grew.
Create a check_files helper to make the tests simpler and easier
to extend. It also reduces instances of bad here-doc whitespace.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using 'git submodule (init|deinit)' a user can select a subset of
submodules to populate. This behaves very similar to the sparse-checkout
feature, but those directories contain their own .git directory
including an object database and ref space. To have the sparse-checkout
file also determine if those files should exist would easily cause
problems. Therefore, keeping these features independent in this way
is the best way forward.
Also create a test that demonstrates this behavior to make sure
it doesn't change as the sparse-checkout feature evolves.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When core.sparseCheckoutCone is enabled, the 'git sparse-checkout set'
command takes a list of directories as input, then creates an ordered
list of sparse-checkout patterns such that those directories are
recursively included and all sibling entries along the parent directories
are also included. Listing the patterns is less user-friendly than the
directories themselves.
In cone mode, and as long as the patterns match the expected cone-mode
pattern types, change the output of 'git sparse-checkout list' to only
show the directories that created the patterns.
With this change, the following piped commands would not change the
working directory:
git sparse-checkout list | git sparse-checkout set --stdin
The only time this would not work is if core.sparseCheckoutCone is
true, but the sparse-checkout file contains patterns that do not
match the expected pattern types for cone mode.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On FreeBSD, when executed by root ls enables the '-A' option:
-A Include directory entries whose names begin with a dot (`.')
except for . and ... Automatically set for the super-user unless
-I is specified.
As a result the .git directory appeared in the output when run as root.
Simulate no-dotfile ls behaviour using a shell glob.
Helped-by: Eric Wong <e@80x24.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ed Maste <emaste@FreeBSD.org>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user uses the sparse-checkout feature in cone mode, they
add patterns using "git sparse-checkout set <dir1> <dir2> ..."
or by using "--stdin" to provide the directories line-by-line over
stdin. This behaviour naturally looks a lot like the way a user
would type "git add <dir1> <dir2> ..."
If core.ignoreCase is enabled, then "git add" will match the input
using a case-insensitive match. Do the same for the sparse-checkout
feature.
Perform case-insensitive checks while updating the skip-worktree
bits during unpack_trees(). This is done by changing the hash
algorithm and hashmap comparison methods to optionally use case-
insensitive methods.
When this is enabled, there is a small performance cost in the
hashing algorithm. To tease out the worst possible case, the
following was run on a repo with a deep directory structure:
git ls-tree -d -r --name-only HEAD |
git sparse-checkout set --stdin
The 'set' command was timed with core.ignoreCase disabled or
enabled. For the repo with a deep history, the numbers were
core.ignoreCase=false: 62s
core.ignoreCase=true: 74s (+19.3%)
For reproducibility, the equivalent test on the Linux kernel
repository had these numbers:
core.ignoreCase=false: 3.1s
core.ignoreCase=true: 3.6s (+16%)
Now, this is not an entirely fair comparison, as most users
will define their sparse cone using more shallow directories,
and the performance improvement from eb42feca97 ("unpack-trees:
hash less in cone mode" 2019-11-21) can remove most of the
hash cost. For a more realistic test, drop the "-r" from the
ls-tree command to store only the first-level directories.
In that case, the Linux kernel repository takes 0.2-0.25s in
each case, and the deep repository takes one second, plus or
minus 0.05s, in each case.
Thus, we _can_ demonstrate a cost to this change, but it is
unlikely to matter to any reasonable sparse-checkout cone.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The index-merge performed by 'git sparse-checkout' will erase any staged
changes, which can lead to data loss. Prevent these attempts by requiring
a clean 'git status' output.
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During the development of the sparse-checkout "cone mode" feature,
an incorrect placement of the initializer for "use_cone_patterns = 1"
caused warnings to show up when a .gitignore file was present with
non-cone-mode patterns. This was fixed in the original commit
introducing the cone mode, but now we should add a test to avoid
hitting this problem again in the future.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If two 'git sparse-checkout set' subcommands are launched at the
same time, the behavior can be unexpected as they compete to write
the sparse-checkout file and update the working directory.
Take a lockfile around the writes to the sparse-checkout file. In
addition, acquire this lock around the working directory update
to avoid two commands updating the working directory in different
ways.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git sparse-checkout disable' subcommand returns a user to a
full working directory. The old process for doing this required
updating the sparse-checkout file with the "/*" pattern and then
updating the working directory with core.sparseCheckout enabled.
Finally, the sparse-checkout file could be removed and the config
setting disabled.
However, it is valuable to keep a user's sparse-checkout file
intact so they can re-enable the sparse-checkout they previously
used with 'git sparse-checkout init'. This is now possible with
the in-process mechanism for updating the working directory.
Reported-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout builtin used 'git read-tree -mu HEAD' to update the
skip-worktree bits in the index and to update the working directory.
This extra process is overly complex, and prone to failure. It also
requires that we write our changes to the sparse-checkout file before
trying to update the index.
Remove this extra process call by creating a direct call to
unpack_trees() in the same way 'git read-tree -mu HEAD' does. In
addition, provide an in-memory list of patterns so we can avoid
reading from the sparse-checkout file. This allows us to test a
proposed change to the file before writing to it.
An earlier version of this patch included a bug when the 'set' command
failed due to the "Sparse checkout leaves no entry on working directory"
error. It would not rollback the index.lock file, so the replay of the
old sparse-checkout specification would fail. A test in t1091 now
covers that scenario.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user provides folders A/ and A/B/ for inclusion in a cone-mode
sparse-checkout file, the parsing logic will notice that A/ appears
both as a "parent" type pattern and as a "recursive" type pattern.
This is unexpected and hence will complain via a warning and revert
to the old logic for checking sparse-checkout patterns.
Prevent this from happening accidentally by sanitizing the folders
for this type of inclusion in the 'git sparse-checkout' builtin.
This happens in two ways:
1. Do not include any parent patterns that also appear as recursive
patterns.
2. Do not include any recursive patterns deeper than other recursive
patterns.
In order to minimize duplicate code for scanning parents, create
hashmap_contains_parent() method. It takes a strbuf buffer to
avoid reallocating a buffer when calling in a tight loop.
Helped-by: Eric Wong <e@80x24.org>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make the cone pattern set easy to use, update the behavior of
'git sparse-checkout (init|set)'.
Add '--cone' flag to 'git sparse-checkout init' to set the config
option 'core.sparseCheckoutCone=true'.
When running 'git sparse-checkout set' in cone mode, a user only
needs to supply a list of recursive folder matches. Git will
automatically add the necessary parent matches for the leading
directories.
When testing 'git sparse-checkout set' in cone mode, check the
error stream to ensure we do not see any errors. Specifically,
we want to avoid the warning that the patterns do not match
the cone-mode patterns.
Helped-by: Eric Wong <e@80x24.org>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parent and recursive patterns allowed by the "cone mode"
option in sparse-checkout are restrictive enough that we
can avoid using the regex parsing. Everything is based on
prefix matches, so we can use hashsets to store the prefixes
from the sparse-checkout file. When checking a path, we can
strip path entries from the path and check the hashset for
an exact match.
As a test, I created a cone-mode sparse-checkout file for the
Linux repository that actually includes every file. This was
constructed by taking every folder in the Linux repo and creating
the pattern pairs here:
/$folder/
!/$folder/*/
This resulted in a sparse-checkout file sith 8,296 patterns.
Running 'git read-tree -mu HEAD' on this file had the following
performance:
core.sparseCheckout=false: 0.21 s (0.00 s)
core.sparseCheckout=true: 3.75 s (3.50 s)
core.sparseCheckoutCone=true: 0.23 s (0.01 s)
The times in parentheses above correspond to the time spent
in the first clear_ce_flags() call, according to the trace2
performance traces.
While this example is contrived, it demonstrates how these
patterns can slow the sparse-checkout feature.
Helped-by: Eric Wong <e@80x24.org>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout feature can have quadratic performance as
the number of patterns and number of entries in the index grow.
If there are 1,000 patterns and 1,000,000 entries, this time can
be very significant.
Create a new Boolean config option, core.sparseCheckoutCone, to
indicate that we expect the sparse-checkout file to contain a
more limited set of patterns. This is a separate config setting
from core.sparseCheckout to avoid breaking older clients by
introducing a tri-state option.
The config option does nothing right now, but will be expanded
upon in a later commit.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The instructions for disabling a sparse-checkout to a full
working directory are complicated and non-intuitive. Add a
subcommand, 'git sparse-checkout disable', to perform those
steps for the user.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git sparse-checkout set' subcommand takes a list of patterns
and places them in the sparse-checkout file. Then, it updates the
working directory to match those patterns. For a large list of
patterns, the command-line call can get very cumbersome.
Add a '--stdin' option to instead read patterns over standard in.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git sparse-checkout set' subcommand takes a list of patterns
as arguments and writes them to the sparse-checkout file. Then, it
updates the working directory using 'git read-tree -mu HEAD'.
The 'set' subcommand will replace the entire contents of the
sparse-checkout file. The write_patterns_and_update() method is
extracted from cmd_sparse_checkout() to make it easier to implement
'add' and/or 'remove' subcommands in the future.
If the core.sparseCheckout config setting is disabled, then enable
the config setting in the worktree config. If we set the config
this way and the sparse-checkout fails, then re-disable the config
setting.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When someone wants to clone a large repository, but plans to work
using a sparse-checkout file, they either need to do a full
checkout first and then reduce the patterns they included, or
clone with --no-checkout, set up their patterns, and then run
a checkout manually. This requires knowing a lot about the repo
shape and how sparse-checkout works.
Add a new '--sparse' option to 'git clone' that initializes the
sparse-checkout file to include the following patterns:
/*
!/*/
These patterns include every file in the root directory, but
no directories. This allows a repo to include files like a
README or a bootstrapping script to grow enlistments from that
point.
During the 'git sparse-checkout init' call, we must first look
to see if HEAD is valid, since 'git clone' does not have a valid
HEAD at the point where it initializes the sparse-checkout. The
following checkout within the clone command will create the HEAD
ref and update the working directory correctly.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Getting started with a sparse-checkout file can be daunting. Help
users start their sparse enlistment using 'git sparse-checkout init'.
This will set 'core.sparseCheckout=true' in their config, write
an initial set of patterns to the sparse-checkout file, and update
their working directory.
Make sure to use the `extensions.worktreeConfig` setting and write
the sparse checkout config to the worktree-specific config file.
This avoids confusing interactions with other worktrees.
The use of running another process for 'git read-tree' is sub-
optimal. This will be removed in a later change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout feature is mostly hidden to users, as its
only documentation is supplementary information in the docs for
'git read-tree'. In addition, users need to know how to edit the
.git/info/sparse-checkout file with the right patterns, then run
the appropriate 'git read-tree -mu HEAD' command. Keeping the
working directory in sync with the sparse-checkout file requires
care.
Begin an effort to make the sparse-checkout feature a porcelain
feature by creating a new 'git sparse-checkout' builtin. This
builtin will be the preferred mechanism for manipulating the
sparse-checkout file and syncing the working directory.
The documentation provided is adapted from the "git read-tree"
documentation with a few edits for clarity in the new context.
Extra sections are added to hint toward a future change to
a more restricted pattern set.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin
brian m. carlson
Junio C Hamano
Elijah Newren
Derrick Stolee
Martin Ågren
Ed Maste