Git's assumption that all path lists are colon-separated is not only
wrong on Windows, it is not even an assumption that is compatible with
POSIX.
In the interest of time, let's not try to fix this properly but simply
work around the obvious breakage on Windows, where the MSYS2 Bash used
by Git for Windows to interpret the Git's Unix shell scripts will
automagically convert path lists in the environment to
semicolon-separated lists of Windows paths (with drive letter and the
corresponding colon and all that jazz).
In other words, we simply look whether there is a semicolon in
GITPERLLIB and split by semicolons if found instead of colons. This is
not fool-proof, of course, as the path list could consist of a single
path. But that is not the case in Git for Windows' test suite, there are
always two paths in GITPERLLIB.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function calls itself "required", but it does not die when it
sees an unexpected EOF.
Let's rename it to "packet_key_val_read()".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
And while at it let's simplify t0021/rot13-filter.pl by
using Git/Packet.pm.
This will make it possible to reuse packet related
functions in other test scripts.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These function help read and write capabilities.
To make them more generic and make it easy to reuse them,
the following changes are made:
- we don't require capabilities to come in a fixed order,
- we allow duplicates,
- we check that the remote supports the capabilities we
advertise,
- we don't check if the remote declares any capability we
don't know about.
The reason behind the last change is that the protocol
should work using only the capabilities that both ends
support, and it should not stop working if one end starts
to advertise a new capability.
Despite those changes, we can still require a set of
capabilities, and die if one of them is not supported.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As checking for a lf character at the end of a buffer
will be useful in another function, let's refactor this
functionality into a small remove_final_lf_or_die()
helper function.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's refactor the code to initialize communication into its own
packet_initialize() function, so that we can reuse this
functionality in following patches.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is no new line at the end of something it receives,
the packet_txt_read() function die()s, but it's difficult to
debug without much context.
Let's give a bit more information when that happens.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before further refactoring the "t0021/rot13-filter.pl" script,
let's modernize the style of its 'if .. elsif .. else' clauses
to improve its readability by making it more similar to our
other perl scripts.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make it possible in a following commit to move packet
reading and writing functions into a Packet.pm module,
let's refactor these functions, so they don't handle
printing debug output and exiting.
While at it let's create packet_required_key_val_read()
to still handle erroring out in a common case.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since edcc8581 ("convert: add filter.<driver>.process
option", 2016-10-16) when t0021/rot13-filter.pl was created, list
comparison in this perl script have been quite broken.
packet_txt_read() returns a 2-element list, and the right hand
side of "eq" also has a list with (two, elements), but "eq" takes
the last element of the list on each side, and compares them. The
first elements (0 or 1) on the right hand side lists do not matter,
which means we do not require to see a flush at the end of the
version -- a simple empty string or an EOF would do, which is
definitely not what we want.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some `clean` / `smudge` filters may require a significant amount of
time to process a single blob (e.g. the Git LFS smudge filter might
perform network requests). During this process the Git checkout
operation is blocked and Git needs to wait until the filter is done to
continue with the checkout.
Teach the filter process protocol, introduced in edcc8581 ("convert: add
filter.<driver>.process option", 2016-10-16), to accept the status
"delayed" as response to a filter request. Upon this response Git
continues with the checkout operation. After the checkout operation Git
calls "finish_delayed_checkout" which queries the filter for remaining
blobs. If the filter is still working on the completion, then the filter
is expected to block. If the filter has completed all remaining blobs
then an empty response is expected.
Git has a multiple code paths that checkout a blob. Support delayed
checkouts only in `clone` (in unpack-trees.c) and `checkout` operations
for now. The optimization is most effective in these code paths as all
files of the tree are processed.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"rot13-filter.pl" always writes "OUT <size>" to the debug log at the end
of a response.
This works perfectly for the existing responses "abort", "error", and
"success". A new response "delayed", that will be introduced in a
subsequent patch, accepts the input without giving the filtered result
right away. At this point we cannot know the size of the response.
Therefore, we do not write "OUT <size>" for "delayed" responses.
To simplify the code we do not write "OUT <size>" for "abort" and
"error" responses either as their size is always zero.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "rot13-filter.pl" helper wrote its debug logs always to "rot13-filter.log".
Make this configurable by defining the log file as first parameter of
"rot13-filter.pl".
This is useful if "rot13-filter.pl" is configured multiple times similar to the
subsequent patch 'convert: add "status=delayed" to filter process protocol'.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A pathname value in a clean/smudge filter process "key=value" pair can
contain the '=' character (introduced in edcc858). Make the user aware
of this issue in the docs, add a corresponding test case, and fix the
issue in filter process value parser of the example implementation in
contrib.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rot13-filter.pl script calls methods on implicitly
defined filehandles (STDOUT, and the result of an open()
call). Prior to perl 5.13, these methods are not
automatically loaded, and perl will complain with:
Can't locate object method "flush" via package "IO::Handle"
Let's explicitly load IO::File (which inherits from
IO::Handle). That's more than we need for just "flush", but
matches what perl has done since:
http://perl5.git.perl.org/perl.git/commit/15e6cdd91beb4cefae4b65e855d68cf64766965d
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rot13-filter.pl script hardcodes "#!/usr/bin/perl", and
does not respect $PERL_PATH at all. That is a problem if the
system does not have perl at that path, or if it has a perl
that is too old to run a complicated script like the
rot13-filter (but PERL_PATH points to a more modern one).
We can fix this by using write_script() to create a new copy
of the script with the correct #!-line. In theory we could
move the whole script inside t0021-conversion.sh rather than
having it as an auxiliary file, but it's long enough that
it just makes things harder to read.
As a bonus, we can stop using the full path to the script in
the filter-process config we add (because the trash
directory is in our PATH). Not only is this shorter, but it
sidesteps any shell-quoting issues. The original was broken
when $TEST_DIRECTORY contained a space, because it was
interpolated in the outer script.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's clean/smudge mechanism invokes an external filter process for
every single blob that is affected by a filter. If Git filters a lot of
blobs then the startup time of the external filter processes can become
a significant part of the overall Git execution time.
In a preliminary performance test this developer used a clean/smudge
filter written in golang to filter 12,000 files. This process took 364s
with the existing filter mechanism and 5s with the new mechanism. See
details here: https://github.com/github/git-lfs/pull/1382
This patch adds the `filter.<driver>.process` string option which, if
used, keeps the external filter process running and processes all blobs
with the packet format (pkt-line) based protocol over standard input and
standard output. The full protocol is explained in detail in
`Documentation/gitattributes.txt`.
A few key decisions:
* The long running filter process is referred to as filter protocol
version 2 because the existing single shot filter invocation is
considered version 1.
* Git sends a welcome message and expects a response right after the
external filter process has started. This ensures that Git will not
hang if a version 1 filter is incorrectly used with the
filter.<driver>.process option for version 2 filters. In addition,
Git can detect this kind of error and warn the user.
* The status of a filter operation (e.g. "success" or "error) is set
before the actual response and (if necessary!) re-set after the
response. The advantage of this two step status response is that if
the filter detects an error early, then the filter can communicate
this and Git does not even need to create structures to read the
response.
* All status responses are pkt-line lists terminated with a flush
packet. This allows us to send other status fields with the same
protocol in the future.
Helped-by: Martin-Louis Bright <mlbright@gmail.com>
Reviewed-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin
Christian Couder
Lars Schneider
Junio C Hamano
Jeff King