Граф коммитов

25 Коммитов

Автор SHA1 Сообщение Дата
Elia Pinto 13f11b9585 t/t3210-pack-refs.sh: use the $( ... ) construct for command substitution
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX.  However, all but the
simplest uses become complicated quickly.  In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
	perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg'  "${_f}"
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-12-28 13:36:27 -08:00
David Turner ce414b33ec refs: make refs/bisect/* per-worktree
We need the place we stick refs for bisects in progress to not be
shared between worktrees.  So we make the refs/bisect/ hierarchy
per-worktree.

The is_per_worktree_ref function and associated docs learn that
refs/bisect/ is per-worktree, as does the git_path code in path.c

The ref-packing functions learn that per-worktree refs should not be
packed (since packed-refs is common rather than per-worktree).

Since refs/bisect is per-worktree, logs/refs/bisect should be too.

Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-01 10:37:39 -07:00
Junio C Hamano 0188f32304 Merge branch 'dt/reflog-tests'
Tests that assume how reflogs are represented on the filesystem too
much have been corrected.

* dt/reflog-tests:
  tests: remove some direct access to .git/logs
  t/t7509: remove unnecessary manipulation of reflog
2015-08-12 14:09:56 -07:00
David Turner d0ab058498 tests: remove some direct access to .git/logs
Alternate refs backends might store reflogs somewhere other than
.git/logs.  Change most test code that directly accesses .git/logs to
instead use git reflog commands.

There are still a few tests which need direct access to reflogs: to
check reflog permissions, to manually create reflogs from scratch, to
save/restore reflogs, to check the format of raw reflog data, and to
remove not just reflog contents, but the reflogs themselves. All cases
which don't need direct access have been modified.

Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-28 11:46:46 -07:00
Michael Haggerty f4ab4f3ab1 lock_packed_refs(): allow retries when acquiring the packed-refs lock
Currently, there is only one attempt to acquire any lockfile, and if
the lock is held by another process, the locking attempt fails
immediately.

This is not such a limitation for loose reference files. First, they
don't take long to rewrite. Second, most reference updates have a
known "old" value, so if another process is updating a reference at
the same moment that we are trying to lock it, then probably the
expected "old" value will not longer be valid, and the update will
fail anyway.

But these arguments do not hold for packed-refs:

* The packed-refs file can be large and take significant time to
  rewrite.

* Many references are stored in a single packed-refs file, so it could
  be that the other process was changing a different reference than
  the one that we are interested in.

Therefore, it is much more likely for there to be spurious lock
conflicts in connection to the packed-refs file, resulting in
unnecessary command failures.

So, if the first attempt to lock the packed-refs file fails, continue
retrying for a configurable length of time before giving up. The
default timeout is 1 second.

Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-14 14:51:51 -07:00
Junio C Hamano 9bc4222746 Merge branch 'jk/faster-name-conflicts'
Optimize the check to see if a ref $F can be created by making sure
no existing ref has $F/ as its prefix, which especially matters in
a repository with a large number of existing refs.

* jk/faster-name-conflicts:
  refs: speed up is_refname_available
2014-09-26 14:39:43 -07:00
Jeff King cbe7333181 refs: speed up is_refname_available
Our filesystem ref storage does not allow D/F conflicts; so
if "refs/heads/a/b" exists, we do not allow "refs/heads/a"
to exist (and vice versa). This falls out naturally for
loose refs, where the filesystem enforces the condition. But
for packed-refs, we have to make the check ourselves.

We do so by iterating over the entire packed-refs namespace
and checking whether each name creates a conflict. If you
have a very large number of refs, this is quite inefficient,
as you end up doing a large number of comparisons with
uninteresting bits of the ref tree (e.g., we know that all
of "refs/tags" is uninteresting in the example above, yet we
check each entry in it).

Instead, let's take advantage of the fact that we have the
packed refs stored as a trie of ref_entry structs. We can
find each component of the proposed refname as we walk
through the trie, checking for D/F conflicts as we go. For a
refname of depth N (i.e., 4 in the above example), we only
have to visit N nodes. And at each visit, we can binary
search the M names at that level, for a total complexity of
O(N lg M). ("M" is different at each level, of course, but
we can take the worst-case "M" as a bound).

In a pathological case of fetching 30,000 fresh refs into a
repository with 8.5 million refs, this dropped the time to
run "git fetch" from tens of minutes to ~30s.

This may also help smaller cases in which we check against
loose refs (which we do when renaming a ref), as we may
avoid a disk access for unrelated loose directories.

Note that the tests we add appear at first glance to be
redundant with what is already in t3210. However, the early
tests are not robust; they are run with reflogs turned on,
meaning that we are not actually testing
is_refname_available at all! The operations will still fail
because the reflogs will hit D/F conflicts in the
filesystem. To get a true test, we must turn off reflogs
(but we don't want to do so for the entire script, because
the point of turning them on was to cover some other cases).

Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-12 12:48:54 -07:00
Jeff King afd11d3ebc pack-refs: prune top-level refs like "refs/foo"
After we have packed all refs, we prune any loose refs that
correspond to what we packed. We do so by first taking a
lock with lock_ref_sha1, and then deleting the loose ref
file.

However, lock_ref_sha1 will refuse to take a lock on any
refs that exist at the top-level of the "refs/" directory,
and we skip pruning the ref.  This is almost certainly not
what we want to happen here. The criteria to be pruned
should not differ from that to be packed; if a ref makes it
to prune_ref, it's because we want it both packed and
pruned (if there are refs you do not want to be packed, they
should be omitted much earlier by pack_ref_is_possible,
which we do in this case if --all is not given).

We can fix this by switching to lock_any_ref_for_update.
This behaves exactly the same with the exception of this
top-level check.

Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-25 12:19:50 -07:00
Michael Haggerty ab292bc4f3 repack_without_ref(): silence errors for dangling packed refs
Stop emitting an error message when deleting a packed reference if we
find another dangling packed reference that is overridden by a loose
reference.  See the previous commit for a longer explanation of the
issue.

We have to be careful to make sure that the invalid packed reference
really *is* overridden by a loose reference; otherwise what we have
found is repository corruption, which we *should* report.

Please note that this approach is vulnerable to a race condition
similar to the race conditions already known to affect packed
references [1]:

* Process 1 tries to peel packed reference X as part of deleting
  another packed reference.  It discovers that X does not refer to a
  valid object (because the object that it referred to has been
  garbage collected).

* Process 2 tries to delete reference X.  It starts by deleting the
  loose reference X.

* Process 1 checks whether there is a loose reference X.  There is not
  (it has just been deleted by process 2), so process 1 reports a
  spurious error "X does not point to a valid object!"

The worst case seems relatively harmless, and the fix is identical to
the fix that will be needed for the other race conditions (namely
holding a lock on the packed-refs file during *all* reference
deletions), so we leave the cleaning up of all of them as a future
project.

[1] http://thread.gmane.org/gmane.comp.version-control.git/211956

Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-01 15:33:10 -07:00
Michael Haggerty 0a0b8d1531 t3210: test for spurious error messages for dangling packed refs
A packed reference can be overridden by a loose reference, in which
case the packed reference is obsolete and is never used.  The object
pointed to by such a reference can be garbage collected.  Since
d66da478f2, this could lead to the emission of a spurious error
message:

    error: refs/heads/master does not point to a valid object!

The error is generated by repack_without_ref() if there is an obsolete
dangling packed reference in packed-refs when the packed-refs file has
to be rewritten due to the deletion of another packed reference.  Add
a failing test demonstrating this problem and some passing tests of
related scenarios.

Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-01 15:33:10 -07:00
Greg Price be7c6d467e pack-refs: remove newly empty directories
In a large repository which uses directories to organize many refs,
"git pack-refs --all --prune" does not improve performance so much
as it should, unless we remove all the now-empty directories as well.

Signed-off-by: Greg Price <price@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-07 09:11:37 -07:00
Gary V. Vaughan 4fdf71be1c tests: use "test_cmp", not "diff", when verifying the result
In tests, call test_cmp rather than raw diff where possible (i.e. if
the output does not go to a pipe), to allow the use of, say, 'cmp'
when the default 'diff -u' is not compatible with a vendor diff.

When that is not possible, use $DIFF, as set in GIT-BUILD-OPTIONS.

Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-31 16:59:27 -07:00
Clemens Buchacher 5bdd8d4a30 do not force write of packed refs
We force writing a ref if it does not exist. Originally, we only had to look
for the ref file to check if it existed. Now we have to look for a packed ref
as well. Luckily, resolve_ref already does all the work for us.

Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-05 14:09:43 -08:00
Nanako Shiraishi 0cb0e143ff tests: use "git xyzzy" form (t0000 - t3599)
Converts tests between t0050-t3903.

Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-03 12:41:46 -07:00
Stephan Beyer d492b31caf t/: Use "test_must_fail git" instead of "! git"
This patch changes every occurrence of "! git" -- with the meaning
that a git call has to gracefully fail -- into "test_must_fail git".

This is useful to

 - make sure the test does not fail because of a signal,
   e.g. SIGSEGV, and

 - advertise the use of "test_must_fail" for new tests.

Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-13 13:21:26 -07:00
Junio C Hamano 41ac414ea2 Sane use of test_expect_failure
Originally, test_expect_failure was designed to be the opposite
of test_expect_success, but this was a bad decision.  Most tests
run a series of commands that leads to the single command that
needs to be tested, like this:

    test_expect_{success,failure} 'test title' '
	setup1 &&
        setup2 &&
        setup3 &&
        what is to be tested
    '

And expecting a failure exit from the whole sequence misses the
point of writing tests.  Your setup$N that are supposed to
succeed may have failed without even reaching what you are
trying to test.  The only valid use of test_expect_failure is to
check a trivial single command that is expected to fail, which
is a minority in tests of Porcelain-ish commands.

This large-ish patch rewrites all uses of test_expect_failure to
use test_expect_success and rewrites the condition of what is
tested, like this:

    test_expect_success 'test title' '
	setup1 &&
        setup2 &&
        setup3 &&
        ! this command should fail
    '

test_expect_failure is redefined to serve as a reminder that
that test *should* succeed but due to a known breakage in git it
currently does not pass.  So if git-foo command should create a
file 'bar' but you discovered a bug that it doesn't, you can
write a test like this:

    test_expect_failure 'git-foo should create bar' '
        rm -f bar &&
        git foo &&
        test -f bar
    '

This construct acts similar to test_expect_success, but instead
of reporting "ok/FAIL" like test_expect_success does, the
outcome is reported as "FIXED/still broken".

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 20:49:34 -08:00
Junio C Hamano 5be60078c9 Rewrite "git-frotz" to "git frotz"
This uses the remove-dashes target to replace "git-frotz" to "git frotz".

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02 22:52:14 -07:00
Linus Torvalds 1b555932cd Fix seriously broken "git pack-refs"
Do *NOT* try this on a repository you care about:

	git pack-refs --all --prune
	git pack-refs

because while the first "pack-refs" does the right thing, the second
pack-refs will totally screw you over.

This is because the second one tries to pack only tags; we should
also pack what are already packed -- otherwise we would lose them.

[jc: with an additional test]

Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-25 19:16:07 -08:00
Junio C Hamano 0f018baba6 --prune is now default for 'pack-refs'
There is no reason not to, really.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-08 14:46:00 -08:00
Junio C Hamano 3b463c3f02 ref-log: fix D/F conflict coming from deleted refs.
After deleting a branch l/k, you should be able to create a
branch l.  Earlier we added remove_empty_directories() on the
ref creation side to remove leftover .git/refs/l directory but
we also need a matching code to remove .git/logs/refs/l
directory.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-10-19 01:28:47 -07:00
Junio C Hamano b3d4204fc4 git-pack-refs --all
This changes 'git-pack-refs' to pack only tags by default.
Branches are meant to be updated, either by committing onto it
yourself or tracking remote branches, and packed entries can
become stale easily, but tags are usually "create once and live
forever" and benefit more from packing.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-10-08 01:36:08 -07:00
Dennis Stosberg 26e5fc3415 Remove bashism from t3210-pack-refs.sh
This bashism makes the test fail if /bin/sh is not bash.

Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-10-06 02:52:37 -07:00
Christian Couder 14c8a681f7 Clean up "git-branch.sh" and add remove recursive dir test cases.
Now that directory recursive remove works in the core C code, we
don't need to do it in "git-branch.sh".

Also add test cases to check that directory recursive remove will
continue to work.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-10-01 08:42:01 -07:00
Christian Couder fc12f0829d Uncomment test case: git branch c/d should barf if branch c exists.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-27 22:26:43 -07:00
Christian Couder 919a3c9813 Add pack-refs and show-ref test cases.
Some of these test cases are from Junio.
One test case is commented out because it doesn't work right now.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-27 22:24:45 -07:00