hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed
for a while, but aren't necessarily the clearest names, especially with
hashmap_partial_clear() being added to the mix and lazy-initialization
now being supported. Peff suggested we adopt the following names[1]:
- hashmap_clear() - remove all entries and de-allocate any
hashmap-specific data, but be ready for reuse
- hashmap_clear_and_free() - ditto, but free the entries themselves
- hashmap_partial_clear() - remove all entries but don't deallocate
table
- hashmap_partial_clear_and_free() - ditto, but free the entries
This patch provides the new names and converts all existing callers over
to the new naming scheme.
[1] https://lore.kernel.org/git/20201030125059.GA3277724@coredump.intra.peff.net/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* ma/worktree-cleanups:
worktree: use skip_prefix to parse target
worktree: rename copy-pasted variable
worktree: update renamed variable in comment
worktree: inline `worktree_ref()` into its only caller
wt-status: introduce wt_status_state_free_buffers()
wt-status: print to s->fp, not stdout
wt-status: replace sha1 mentions with oid
When we have a `struct wt_status_state`, we manually free its `branch`,
`onto` and `detached_from`, or sometimes just one or two of them.
Provide a function `wt_status_state_free_buffers()` which does the
freeing.
The callers are still aware of these fields, e.g., they check whether
`branch` was populated or not. But this way, they don't need to know
about *all* of them, and if `struct wt_status_state` gets more fields,
they will not need to learn to free them.
Users of `struct wt_status` (which contains a `wt_status_state`) already
have `wt_status_collect_free_buffers()` (corresponding to
`wt_status_collect()`) which we can also teach to use this new helper.
Finally, note that we're currently leaving dangling pointers behind.
Some callers work on a stack-allocated struct, where this is obviously
ok. But for the users of `run_status()` in builtin/commit.c, there are
ample opportunities for someone to mistakenly use those dangling
pointers. We seem to be ok for now, but it's a use-after-free waiting to
happen. Let's leave NULL-pointers behind instead.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
21bf933928 (ref-filter: allow merged and no-merged filters, 2020-09-15)
added an early return to reach_filter(). Avoid leaking the memory of a
then unused array by postponing its allocation until we know we need it.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal reachable-filter API is a bit loose and imprecise; it
also bleeds unnecessarily into the public header. Tighten the API
by:
* renaming do_merge_filter() to reach_filter()
* separating parameters to explicitly identify what data is used
by the function instead of passing an entire ref_filter_cbdata
struct
* renaming and moving internal constants from header to source
file
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable ref-filter to process multiple merged and no-merged filters, and
extend functionality to git branch, git tag and git for-each-ref. This
provides an easy way to check for branches that are "graduation
candidates:"
$ git branch --no-merged master --merged next
If passed more than one merged (or more than one no-merged) filter, refs
must be reachable from any one of the merged commits, and reachable from
none of the no-merged commits.
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--format=" option to the "for-each-ref" command and friends
learned a few more tricks, e.g. the ":short" suffix that applies to
"objectname" now also can be used for "parent", "tree", etc.
* hv/ref-filter-misc:
ref-filter: add `sanitize` option for 'subject' atom
pretty: refactor `format_sanitized_subject()`
ref-filter: add `short` modifier to 'parent' atom
ref-filter: add `short` modifier to 'tree' atom
ref-filter: rename `objectname` related functions and fields
ref-filter: modify error messages in `grab_objectname()`
ref-filter: refactor `grab_objectname()`
ref-filter: support different email formats
The parser for "git for-each-ref --format=..." was too loose when
parsing the "%(trailers...)" atom, and forgot that "trailers" and
"trailers:<modifiers>" are the only two allowed forms, which has
been corrected.
* hv/ref-filter-trailers-atom-parsing-fix:
ref-filter: 'contents:trailers' show error if `:` is missing
t6300: unify %(trailers) and %(contents:trailers) tests
Currently, subject does not take any arguments. This commit introduce
`sanitize` formatting option to 'subject' atom.
`subject:sanitize` - print sanitized subject line, suitable for a filename.
e.g.
%(subject): "the subject line"
%(subject:sanitize): "the-subject-line"
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes while using 'parent' atom, user might want to see abbrev hash
instead of full 40 character hash.
Just like 'objectname', it might be convenient for users to have the
`:short` and `:short=<length>` option for printing 'parent' hash.
Let's introduce `short` option to 'parent' atom.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes while using 'tree' atom, user might want to see abbrev hash
instead of full 40 character hash.
Just like 'objectname', it might be convenient for users to have the
`:short` and `:short=<length>` option for printing 'tree' hash.
Let's introduce `short` option to 'tree' atom.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In previous commits, we prepared some `objectname` related functions
for more generic usage, so that these functions can be used for `tree`
and `parent` atom.
But the name of some functions and fields may mislead someone.
For ex: function `objectname_atom_parser()` implies that it is
for atom `objectname`.
Let's rename all such functions and fields.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we plan to use `grab_objectname()` for `tree` and `parent` atom,
it's better to parameterize the error messages in the function
`grab_objectname()` where "objectname" is hard coded.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepares `grab_objectname()` for more generic usage.
This change will allow us to reuse `grab_objectname()` for
the `tree` and `parent` atoms in a following commit.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, ref-filter only supports printing email with angle brackets.
Let's add support for two more email options.
- trim : for email without angle brackets.
- localpart : for the part before the @ sign out of trimmed email
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'contents' atom does not show any error if used with 'trailers'
atom and colon is missing before trailers arguments.
e.g %(contents:trailersonly) works, while it shouldn't.
It is definitely not an expected behavior.
Let's fix this bug.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The argv_array API is useful for not just managing argv but any
"vector" (NULL-terminated array) of strings, and has seen adoption
to a certain degree. It has been renamed to "strvec" to reduce the
barrier to adoption.
* jk/strvec:
strvec: rename struct fields
strvec: drop argv_array compatibility layer
strvec: update documention to avoid argv_array
strvec: fix indentation in renamed calls
strvec: convert remaining callers away from argv_array name
strvec: convert more callers away from argv_array name
strvec: convert builtin/ callers away from argv_array name
quote: rename sq_dequote_to_argv_array to mention strvec
strvec: rename files from argv-array to strvec
argv-array: rename to strvec
argv-array: use size_t for count and alloc
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit fixes a couple of minor spelling mistakes inside
comments.
Signed-off-by: Steve Kemp <steve@steve.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the remaining files, as the resulting diff is
reasonably sized.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's useful and efficient to be able to get the size of the
contents directly without having to pipe through `wc -c`.
Also the result of the following:
`git for-each-ref --format='%(contents)' refs/heads/my-branch | wc -c`
is off by one as `git for-each-ref` appends a newline character
after the contents, which can be seen by comparing its output
with the output from `git cat-file`.
As with %(contents), %(contents:size) is silently ignored, if a
ref points to something other than a commit or a tag:
```
$ git update-ref refs/mytrees/first HEAD^{tree}
$ git for-each-ref --format='%(contents)' refs/mytrees/first
$ git for-each-ref --format='%(contents:size)' refs/mytrees/first
```
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
API cleanup for get_worktrees()
* es/get-worktrees-unsort:
worktree: drop get_worktrees() unused 'flags' argument
worktree: drop get_worktrees() special-purpose sorting option
get_worktrees() accepts a 'flags' argument, however, there are no
existing flags (the lone flag GWT_SORT_LINKED was recently retired) and
no behavior which can be tweaked. Therefore, drop the 'flags' argument.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch" and other "for-each-ref" variants accepted multiple
--sort=<key> options in the increasing order of precedence, but it
had a few breakages around "--ignore-case" handling, and tie-breaking
with the refname, which have been fixed.
* jk/for-each-ref-multi-key-sort-fix:
ref-filter: apply fallback refname sort only after all user sorts
ref-filter: apply --ignore-case to all sorting keys
Commit 9e468334b4 (ref-filter: fallback on alphabetical comparison,
2015-10-30) taught ref-filter's sort to fallback to comparing refnames.
But it did it at the wrong level, overriding the comparison result for a
single "--sort" key from the user, rather than after all sort keys have
been exhausted.
This worked correctly for a single "--sort" option, but not for multiple
ones. We'd break any ties in the first key with the refname and never
evaluate the second key at all.
To make matters even more interesting, we only applied this fallback
sometimes! For a field like "taggeremail" which requires a string
comparison, we'd truly return the result of strcmp(), even if it was 0.
But for numerical "value" fields like "taggerdate", we did apply the
fallback. And that's why our multiple-sort test missed this: it uses
taggeremail as the main comparison.
So let's start by adding a much more rigorous test. We'll have a set of
commits expressing every combination of two tagger emails, dates, and
refnames. Then we can confirm that our sort is applied with the correct
precedence, and we'll be hitting both the string and value comparators.
That does show the bug, and the fix is simple: moving the fallback to
the outer compare_refs() function, after all ref_sorting keys have been
exhausted.
Note that in the outer function we don't have an "ignore_case" flag, as
it's part of each individual ref_sorting element. It's debatable what
such a fallback should do, since we didn't use the user's keys to match.
But until now we have been trying to respect that flag, so the
least-invasive thing is to try to continue to do so. Since all callers
in the current code either set the flag for all keys or for none, we can
just pull the flag from the first key. In a hypothetical world where the
user really can flip the case-insensitivity of keys separately, we may
want to extend the code to distinguish that case from a blanket
"--ignore-case".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the ref-filter users (for-each-ref, branch, and tag) take an
--ignore-case option which makes filtering and sorting case-insensitive.
However, this option was applied only to the first element of the
ref_sorting list. So:
git for-each-ref --ignore-case --sort=refname
would do what you expect, but:
git for-each-ref --ignore-case --sort=refname --sort=taggername
would sort the primary key (taggername) case-insensitively, but sort the
refname case-sensitively. We have two options here:
- teach callers to set ignore_case on the whole list
- replace the ref_sorting list with a struct that contains both the
list of sorting keys, as well as options that apply to _all_
keys
I went with the first one here, as it gives more flexibility if we later
want to let the users set the flag per-key (presumably through some
special syntax when defining the key; for now it's all or nothing
through --ignore-case).
The new test covers this by sorting on both tagger and subject
case-insensitively, which should compare "a" and "A" identically, but
still sort them before "b" and "B". We'll break ties by sorting on the
refname to give ourselves a stable output (this is actually supposed to
be done automatically, but there's another bug which will be fixed in
the next commit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A comment refers to the "sha1s in the given sha1 array". But this became
an oid_array along with everywhere else in 910650d2f8 (Rename sha1_array
to oid_array, 2017-03-31). Plus there's an extra line of leftover
editing cruft we can drop.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 9700fae5ee (for-each-ref: let upstream/push report the remote
ref name, 2017-11-07) added a remote_ref_for_branch() helper, which
is modeled after remote_for_branch(). This includes providing an
"explicit" out-parameter that tells the caller whether the remote
was configured by the user, or whether we picked a default name like
"origin".
But unlike remote names, there is no default name when the user
didn't configure one. The only way the "explicit" parameter is used
by the caller is to use the value returned from the helper when it
is set, and use an empty string otherwise, ignoring the returned
value from the helper.
Let's drop the "explicit" out-parameter, and return NULL when the
returned value from the helper should be ignored, to simplify the
function interface.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a caller sets the object_info.delta_base_sha1 to a non-NULL pointer,
we'll write the oid of the object's delta base to it. But we can
increase our type safety by switching this to a real object_id struct.
All of our callers are just pointing into the hash member of an
object_id anyway, so there's no inconvenience.
Note that we do still keep it as a pointer-to-struct, because the NULL
sentinel value tells us whether the caller is even interested in the
information.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Comments stating that "struct hashmap_entry" must be the first
member in a struct are no longer valid.
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`hashmap_free_entries' behaves like `container_of' and passes
the offset of the hashmap_entry struct to the internal
`hashmap_free_' function, allowing the function to free any
struct pointer regardless of where the hashmap_entry field
is located.
`hashmap_free' no longer takes any arguments aside from
the hashmap itself.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Another step in eliminating the requirement of hashmap_entry
being the first member of a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update callers to use hashmap_get_entry, hashmap_get_entry_from_hash
or container_of as appropriate.
This is another step towards eliminating the requirement of
hashmap_entry being the first field in a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is less error-prone than "void *" as the compiler now
detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
C compilers do type checking to make life easier for us. So
rely on that and update all hashmap_entry_init callers to take
"struct hashmap_entry *" to avoid future bugs while improving
safety and readability.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"for-each-ref" and friends that shows refs did not protect themselves
against ancient tags that did not record tagger names when asked to
show "%(taggername)", which have been corrected.
* mp/for-each-ref-missing-name-or-email:
ref-filter: initialize empty name or email fields
Avoid derefencing ->tagged without checking for NULL by using the
convenience wrapper for getting the ID of the tagged object. It die()s
when encountering a broken tag instead of segfaulting.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Formatting $(taggername) on headerless tags such as v0.99 in Git
causes a SIGABRT with error "munmap_chunk(): invalid pointer",
because of an oversight in commit f0062d3b74 (ref-filter: free
item->value and item->value->s, 2018-10-19).
Signed-off-by: Mischa POSLAWSKY <git@shiar.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We treat the `value` pointer as a pointer to a struct and free its `s`
field. But `value` is in fact an array of structs. As a result, we only
free the first `s` out of `used_atom_cnt`-many and leak the rest. Make
sure we free all items in `value`.
In the caller, `ref_array_clear()`, this means we need to be careful not
to zero `used_atom_cnt` until after we've called `free_array_item()`. We
could move just a single line, but let's keep related things close
together instead, by first handling `array`, then `used_atom`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch --list" learned to always output the detached HEAD as
the first item (when the HEAD is detached, of course), regardless
of the locale.
* md/sort-detached-head-first:
ref-filter: sort detached HEAD lines firstly
"git branch --list" learned to show branches that are checked out
in other worktrees connected to the same repository prefixed with
'+', similar to the way the currently checked out branch is shown
with '*' in front.
* nb/branch-show-other-worktrees-head:
branch: add worktree info on verbose output
branch: update output to include worktree info
ref-filter: add worktreepath atom
Since cfe004a5a9 (ref-filter: limit traversal to prefix, 2017-05-22),
the ref-filter code has sought to limit the traversals to a prefix of
the given patterns.
That code stopped short of handling more than one pattern, because it
means invoking 'for_each_ref_in' multiple times. If we're not careful
about which patterns overlap, we will output the same refs multiple
times.
For instance, consider the set of patterns 'refs/heads/a/*',
'refs/heads/a/b/c', and 'refs/tags/v1.0.0'. If we naïvely ran:
for_each_ref_in("refs/heads/a/*", ...);
for_each_ref_in("refs/heads/a/b/c", ...);
for_each_ref_in("refs/tags/v1.0.0", ...);
we would see 'refs/heads/a/b/c' (and everything underneath it) twice.
Instead, we want to partition the patterns into disjoint sets, where we
know that no ref will be matched by any two patterns in different sets.
In the above, these are:
- {'refs/heads/a/*', 'refs/heads/a/b/c'}, and
- {'refs/tags/v1.0.0'}
Given one of these disjoint sets, what is a suitable pattern to pass to
'for_each_ref_in'? One approach is to compute the longest common prefix
over all elements in that disjoint set, and let the caller cull out the
refs they didn't want. Computing the longest prefix means that in most
cases, we won't match too many things the caller would like to ignore.
The longest common prefixes of the above are:
- {'refs/heads/a/*', 'refs/heads/a/b/c'} -> refs/heads/a/*
- {'refs/tags/v1.0.0'} -> refs/tags/v1.0.0
We instead invoke:
for_each_ref_in("refs/heads/a/*", ...);
for_each_ref_in("refs/tags/v1.0.0", ...);
Which provides us with the refs we were looking for with a minimal
amount of extra cruft, but never a duplicate of the ref we asked for.
Implemented here is an algorithm which accomplishes the above, which
works as follows:
1. Lexicographically sort the given list of patterns.
2. Initialize 'prefix' to the empty string, where our goal is to
build each element in the above set of longest common prefixes.
3. Consider each pattern in the given set, and emit 'prefix' if it
reaches the end of a pattern, or touches a wildcard character. The
end of a string is treated as if it precedes a wildcard. (Note that
there is some room for future work to detect that, e.g., 'a?b' and
'abc' are disjoint).
4. Otherwise, recurse on step (3) with the slice of the list
corresponding to our current prefix (i.e., the subset of patterns
that have our prefix as a literal string prefix.)
This algorithm is 'O(kn + n log(n))', where 'k' is max(len(pattern)) for
each pattern in the list, and 'n' is len(patterns).
By discovering this set of interesting patterns, we reduce the runtime
of multi-pattern 'git for-each-ref' (and other ref traversals) from
O(N) to O(n log(N)), where 'N' is the total number of packed references.
Running 'git for-each-ref refs/tags/a refs/tags/b' on a repository with
10,000,000 refs in 'refs/tags/huge-N', my best-of-five times drop from:
real 0m5.805s
user 0m5.188s
sys 0m0.468s
to:
real 0m0.001s
user 0m0.000s
sys 0m0.000s
On linux.git, the times to dig out two of the latest -rc tags drops from
0.002s to 0.001s, so the change on repositories with fewer tags is much
less noticeable.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch, "git branch" would put "(HEAD detached...)" and "(no
branch, rebasing...)" lines before all the other branches *in most
cases* except for when using Chinese-language messages. zh_CN generally
uses a full-width "(" symbol (codepoint FF08) to match the full-width
proportions of Chinese characters, and the translated strings we had did
use them. This meant that the detached HEAD line would appear after all
local refs and even after the remote refs if there were any.
AFAIK, it is sometimes not jarring to see the half-width parenthesis in
"full-width" text as in the CJK languages, for instance when there are
no characters preceding or following the parenthesized text fragment. By
removing the parenthesis from the localizable text, we can share strings
with wt-status.c and remove a cautionary comment to translators.
Remove the ( from the localizable portion of messages so the sorting
happens properly regardless of locale.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren
Junio C Hamano
Martin Ågren
René Scharfe
Aaron Lipman
Hariom Verma
Jeff King
Steve Kemp
Christian Couder
Eric Sunshine
Eric Wong
Mischa POSLAWSKY
Taylor Blau
Matthew DeVore