Граф коммитов

64 Коммитов

Автор SHA1 Сообщение Дата
Stefan Beller c553c72eed run-command: add an asynchronous parallel child processor
This allows to run external commands in parallel with ordered output
on stderr.

If we run external commands in parallel we cannot pipe the output directly
to the our stdout/err as it would mix up. So each process's output will
flow through a pipe, which we buffer. One subprocess can be directly
piped to out stdout/err for a low latency feedback to the user.

Example:
Let's assume we have 5 submodules A,B,C,D,E and each fetch takes a
different amount of time as the different submodules vary in size, then
the output of fetches in sequential order might look like this:

 time -->
 output: |---A---| |-B-| |-------C-------| |-D-| |-E-|

When we schedule these submodules into maximal two parallel processes,
a schedule and sample output over time may look like this:

process 1: |---A---| |-D-| |-E-|

process 2: |-B-| |-------C-------|

output:    |---A---|B|---C-------|DE

So A will be perceived as it would run normally in the single child
version. As B has finished by the time A is done, we can dump its whole
progress buffer on stderr, such that it looks like it finished in no
time. Once that is done, C is determined to be the visible child and
its progress will be reported in real time.

So this way of output is really good for human consumption, as it only
changes the timing, not the actual output.

For machine consumption the output needs to be prepared in the tasks,
by either having a prefix per line or per block to indicate whose tasks
output is displayed, because the output order may not follow the
original sequential ordering:

 |----A----| |--B--| |-C-|

will be scheduled to be all parallel:

process 1: |----A----|
process 2: |--B--|
process 3: |-C-|
output:    |----A----|CB

This happens because C finished before B did, so it will be queued for
output before B.

To detect when a child has finished executing, we check interleaved
with other actions (such as checking the liveliness of children or
starting new processes) whether the stderr pipe still exists. Once a
child closed its stderr stream, we assume it is terminating very soon,
and use `finish_command()` from the single external process execution
interface to collect the exit status.

By maintaining the strong assumption of stderr being open until the
very end of a child process, we can avoid other hassle such as an
implementation using `waitpid(-1)`, which is not implemented in Windows.

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-12-16 12:06:08 -08:00
Junio C Hamano c3c592ef95 Merge branch 'rs/daemon-plug-child-leak'
"git daemon" uses "run_command()" without "finish_command()", so it
needs to release resources itself, which it forgot to do.

* rs/daemon-plug-child-leak:
  daemon: plug memory leak
  run-command: factor out child_process_clear()
2015-11-03 15:13:12 -08:00
René Scharfe 2d71608ec0 run-command: factor out child_process_clear()
Avoid duplication by moving the code to release allocated memory for
arguments and environment to its own function, child_process_clear().
Export it to provide a counterpart to child_process_init().

Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-11-02 15:01:00 -08:00
Junio C Hamano 2b72dbbcf3 Merge branch 'ti/glibc-stdio-mutex-from-signal-handler'
Allocation related functions and stdio are unsafe things to call
inside a signal handler, and indeed killing the pager can cause
glibc to deadlock waiting on allocation mutex as our signal handler
tries to free() some data structures in wait_for_pager().  Reduce
these unsafe calls.

* ti/glibc-stdio-mutex-from-signal-handler:
  pager: don't use unsafe functions in signal handlers
2015-10-07 13:38:16 -07:00
Junio C Hamano 88bad58d38 Merge branch 'jk/async-pkt-line'
The debugging infrastructure for pkt-line based communication has
been improved to mark the side-band communication specifically.

* jk/async-pkt-line:
  pkt-line: show packets in async processes as "sideband"
  run-command: provide in_async query function
2015-10-05 12:30:09 -07:00
Takashi Iwai 507d7804c0 pager: don't use unsafe functions in signal handlers
Since the commit a3da882120 (pager: do wait_for_pager on signal
death), we call wait_for_pager() in the pager's signal handler.  The
recent bug report revealed that this causes a deadlock in glibc at
aborting "git log" [*1*].  When this happens, git process is left
unterminated, and it can't be killed by SIGTERM but only by SIGKILL.

The problem is that wait_for_pager() function does more than waiting
for pager process's termination, but it does cleanups and printing
errors.  Unfortunately, the functions that may be used in a signal
handler are very limited [*2*].  Particularly, malloc(), free() and the
variants can't be used in a signal handler because they take a mutex
internally in glibc.  This was the cause of the deadlock above.  Other
than the direct calls of malloc/free, many functions calling
malloc/free can't be used.  strerror() is such one, either.

Also the usage of fflush() and printf() in a signal handler is bad,
although it seems working so far.  In a safer side, we should avoid
them, too.

This patch tries to reduce the calls of such functions in signal
handlers.  wait_for_signal() takes a flag and avoids the unsafe
calls.   Also, finish_command_in_signal() is introduced for the
same reason.  There the free() calls are removed, and only waits for
the children without whining at errors.

[*1*] https://bugzilla.opensuse.org/show_bug.cgi?id=942297
[*2*] http://pubs.opengroup.org/onlinepubs/9699919799/functions/V2_chap02.html#tag_15_04_03

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-04 14:57:51 -07:00
Jeff King 661a8cf408 run-command: provide in_async query function
It's not easy for arbitrary code to find out whether it is
running in an async process or not. A top-level function
which is fed to start_async() can know (you just pass down
an argument saying "you are async"). But that function may
call other global functions, and we would not want to have
to pass the information all the way through the call stack.

Nor can we simply set a global variable, as those may be
shared between async threads and the main thread (if the
platform supports pthreads). We need pthread tricks _or_ a
global variable, depending on how start_async is
implemented.

The callers don't have enough information to do this right,
so let's provide a simple query function that does.
Fortunately we can reuse the existing infrastructure to make
the pthread case simple (and even simplify die_async() by
using our new function).

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-01 15:11:53 -07:00
Jeff King 03f2c7731b find_hook: keep our own static buffer
The find_hook function returns the results of git_path,
which is a static buffer shared by other path-related calls.
Returning such a buffer is slightly dangerous, because it
can be overwritten by seemingly unrelated functions.

Let's at least keep our _own_ static buffer, so you can
only get in trouble by calling find_hook in quick
succession, which is less likely to happen and more obvious
to notice.

While we're at it, let's add some documentation of the
function's limitations.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-10 15:37:13 -07:00
Junio C Hamano 68a2e6a2c8 Merge branch 'nd/multiple-work-trees'
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.

* nd/multiple-work-trees: (41 commits)
  prune --worktrees: fix expire vs worktree existence condition
  t1501: fix test with split index
  t2026: fix broken &&-chain
  t2026 needs procondition SANITY
  git-checkout.txt: a note about multiple checkout support for submodules
  checkout: add --ignore-other-wortrees
  checkout: pass whole struct to parse_branchname_arg instead of individual flags
  git-common-dir: make "modules/" per-working-directory directory
  checkout: do not fail if target is an empty directory
  t2025: add a test to make sure grafts is working from a linked checkout
  checkout: don't require a work tree when checking out into a new one
  git_path(): keep "info/sparse-checkout" per work-tree
  count-objects: report unused files in $GIT_DIR/worktrees/...
  gc: support prune --worktrees
  gc: factor out gc.pruneexpire parsing code
  gc: style change -- no SP before closing parenthesis
  checkout: clean up half-prepared directories in --to mode
  checkout: reject if the branch is already checked out elsewhere
  prune: strategies for linked checkouts
  checkout: support checking out into a new working directory
  ...
2015-05-11 14:23:39 -07:00
Jeff King 911ec99b68 run-command: introduce capture_command helper
Something as simple as reading the stdout from a command
turns out to be rather hard to do right. Doing:

  cmd.out = -1;
  run_command(&cmd);
  strbuf_read(&buf, cmd.out, 0);

can result in deadlock if the child process produces a large
amount of output. What happens is:

  1. The parent spawns the child with its stdout connected
     to a pipe, of which the parent is the sole reader.

  2. The parent calls wait(), blocking until the child exits.

  3. The child writes to stdout. If it writes more data than
     the OS pipe buffer can hold, the write() call will
     block.

This is a deadlock; the parent is waiting for the child to
exit, and the child is waiting for the parent to call
read().

So we might try instead:

  start_command(&cmd);
  strbuf_read(&buf, cmd.out, 0);
  finish_command(&cmd);

But that is not quite right either. We are examining cmd.out
and running finish_command whether start_command succeeded
or not, which is wrong. Moreover, these snippets do not do
any error handling. If our read() fails, we must make sure
to still call finish_command (to reap the child process).
And both snippets failed to close the cmd.out descriptor,
which they must do (provided start_command succeeded).

Let's introduce a run-command helper that can make this a
bit simpler for callers to get right.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-22 21:38:31 -07:00
Junio C Hamano 77a801d237 Merge branch 'jc/hook-cleanup'
Remove unused code.

* jc/hook-cleanup:
  run-command.c: retire unused run_hook_with_custom_index()
2014-12-22 12:27:10 -08:00
Nguyễn Thái Ngọc Duy dcf692625a path.c: make get_pathname() call sites return const char *
Before the previous commit, get_pathname returns an array of PATH_MAX
length. Even if git_path() and similar functions does not use the
whole array, git_path() caller can, in theory.

After the commit, get_pathname() may return a buffer that has just
enough room for the returned string and git_path() caller should never
write beyond that.

Make git_path(), mkpath() and git_path_submodule() return a const
buffer to make sure callers do not write in it at all.

This could have been part of the previous commit, but the "const"
conversion is too much distraction from the core changes in path.c.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-12-01 11:00:10 -08:00
Junio C Hamano 814dd8e078 run-command.c: retire unused run_hook_with_custom_index()
This was originally meant to be used to rewrite run_commit_hook()
that only special cases the GIT_INDEX_FILE environment, but the
run_hook_ve() refactoring done earlier made the implementation of
run_commit_hook() thin and clean enough.

Nobody uses this, so retire it as an unfinished clean-up made
unnecessary.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-12-01 08:39:43 -08:00
René Scharfe 19a583dc39 run-command: add env_array, an optional argv_array for env
Similar to args, add a struct argv_array member to struct child_process
that simplifies specifying the environment for children.  It is freed
automatically by finish_command() or if start_command() encounters an
error.

Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-19 15:26:31 -07:00
René Scharfe 483bbd4e4c run-command: introduce child_process_init()
Add a helper function for initializing those struct child_process
variables for which the macro CHILD_PROCESS_INIT can't be used.

Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-20 09:54:58 -07:00
René Scharfe d318027932 run-command: introduce CHILD_PROCESS_INIT
Most struct child_process variables are cleared using memset first after
declaration.  Provide a macro, CHILD_PROCESS_INIT, that can be used to
initialize them statically instead.  That's shorter, doesn't require a
function call and is slightly more readable (especially given that we
already have STRBUF_INIT, ARGV_ARRAY_INIT etc.).

Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-20 09:53:37 -07:00
Jeff King c460c0ecdc run-command: store an optional argv_array
All child_process structs need to point to an argv. For
flexibility, we do not mandate the use of a dynamic
argv_array. However, because the child_process does not own
the memory, this can make memory management with a
separate argv_array difficult.

For example, if a function calls start_command but not
finish_command, the argv memory must persist. The code needs
to arrange to clean up the argv_array separately after
finish_command runs. As a result, some of our code in this
situation just leaks the memory.

To help such cases, this patch adds a built-in argv_array to
the child_process, which gets cleaned up automatically (both
in finish_command and when start_command fails).  Callers
may use it if they choose, but can continue to use the raw
argv if they wish.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-05-15 09:49:09 -07:00
Benoit Pierre b549be0da7 run-command: mark run_hook_with_custom_index as deprecated
Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-18 11:26:12 -07:00
Benoit Pierre 15048f8a9a commit: fix patch hunk editing with "commit -p -m"
Don't change git environment: move the GIT_EDITOR=":" override to the
hook command subprocess, like it's already done for GIT_INDEX_FILE.

Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-18 11:25:12 -07:00
Ramsay Jones 9fe3edc47f Add the LAST_ARG_MUST_BE_NULL macro
The sentinel function attribute is not understood by versions of
the gcc compiler prior to v4.0. At present, for earlier versions
of gcc, the build issues 108 warnings related to the unknown
attribute. In order to suppress the warnings, we conditionally
define the LAST_ARG_MUST_BE_NULL macro to provide the sentinel attribute
for gcc v4.0 and newer.

Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-19 09:26:15 -07:00
Jeff King eccb614924 use "sentinel" function attribute for variadic lists
This attribute can help gcc notice when callers forget to
add a NULL sentinel to the end of the function. This is our
first use of the sentinel attribute, but we shouldn't need
to #ifdef for other compilers, as __attribute__ is already a
no-op on non-gcc-compatible compilers.

Suggested-by: Bert Wesarg <bert.wesarg@googlemail.com>
More-Spots-Found-By: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-09 22:23:09 -07:00
Aaron Schrab 5a7da2dca1 hooks: Add function to check if a hook exists
Create find_hook() function to determine if a given hook exists and is
executable.  If it is, the path to the script will be returned,
otherwise NULL is returned.

This encapsulates the tests that are used to check for the existence of
a hook in one place, making it easier to modify those checks if that is
found to be necessary.  This also makes it simple for places that can
use a hook to check if a hook exists before doing, possibly lengthy,
setup work which would be pointless if no such hook is present.

The returned value is left as a static value from get_pathname() rather
than a duplicate because it is anticipated that the return value will
either be used as a boolean, immediately added to an argv_array list
which would result in it being duplicated at that point, or used to
actually run the command without much intervening work.  Callers which
need to hold onto the returned value for a longer time are expected to
duplicate the return value themselves.

Signed-off-by: Aaron Schrab <aaron@schrab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-14 09:25:40 -08:00
Jeff King e8320f350f pager: drop "wait for output to run less" hack
Commit 35ce862 (pager: Work around window resizing bug in
'less', 2007-01-24) causes git's pager sub-process to wait
to receive input after forking but before exec-ing the
pager. To handle this, run-command had to grow a "pre-exec
callback" feature. Unfortunately, this feature does not work
at all on Windows (where we do not fork), and interacts
poorly with run-command's parent notification system. Its
use should be discouraged.

The bug in less was fixed in version 406, which was released
in June 2007. It is probably safe at this point to remove
our workaround. That lets us rip out the preexec_cb feature
entirely.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-05 09:38:00 -07:00
Clemens Buchacher 10c6cddd92 dashed externals: kill children on exit
Several git commands are so-called dashed externals, that is commands
executed as a child process of the git wrapper command. If the git
wrapper is killed by a signal, the child process will continue to run.
This is different from internal commands, which always die with the git
wrapper command.

Enable the recently introduced cleanup mechanism for child processes in
order to make dashed externals act more in line with internal commands.

Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-08 15:07:20 -08:00
Jeff King afe19ff7b5 run-command: optionally kill children on exit
When we spawn a helper process, it should generally be done
and finish_command called before we exit. However, if we
exit abnormally due to an early return or a signal, the
helper may continue to run in our absence.

In the best case, this may simply be wasted CPU cycles or a
few stray messages on a terminal. But it could also mean a
process that the user thought was aborted continues to run
to completion (e.g., a push's pack-objects helper will
complete the push, even though you killed the push process).

This patch provides infrastructure for run-command to keep
track of PIDs to be killed, and clean them on signal
reception or input, just as we do with tempfiles. PIDs can
be added in two ways:

  1. If NO_PTHREADS is defined, async helper processes are
     automatically marked. By definition this code must be
     ready to die when the parent dies, since it may be
     implemented as a thread of the parent process.

  2. If the run-command caller specifies the "clean_on_exit"
     option. This is not the default, as there are cases
     where it is OK for the child to outlive us (e.g., when
     spawning a pager).

PIDs are cleared from the kill-list automatically during
wait_or_whine, which is called from finish_command and
finish_async.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-08 15:06:35 -08:00
Johannes Sixt f6b6098316 Enable threaded async procedures whenever pthreads is available
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-10 14:26:54 -08:00
Johannes Sixt 200a76b74d Reimplement async procedures using pthreads
On Windows, async procedures have always been run in threads, and the
implementation used Windows specific APIs. Rewrite the code to use pthreads.

A new configuration option is introduced so that the threaded implementation
can also be used on POSIX systems. Since this option is intended only as
playground on POSIX, but is mandatory on Windows, the option is not
documented.

One detail is that on POSIX it is necessary to set FD_CLOEXEC on the pipe
handles. On Windows, this is not needed because pipe handles are not
inherited to child processes, and the new calls to set_cloexec() are
effectively no-ops.

Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-07 00:37:36 -08:00
Junio C Hamano 76d44c8cfd Merge branch 'sp/maint-push-sideband' into sp/push-sideband
* sp/maint-push-sideband:
  receive-pack: Send hook output over side band #2
  receive-pack: Wrap status reports inside side-band-64k
  receive-pack: Refactor how capabilities are shown to the client
  send-pack: demultiplex a sideband stream with status data
  run-command: support custom fd-set in async
  run-command: Allow stderr to be a caller supplied pipe
  Update git fsck --full short description to mention packs

Conflicts:
	run-command.c
2010-02-05 21:08:53 -08:00
Erik Faye-Lund ae6a5609c0 run-command: support custom fd-set in async
This patch adds the possibility to supply a set of non-0 file
descriptors for async process communication instead of the
default-created pipe.

Additionally, we now support bi-directional communiction with the
async procedure, by giving the async function both read and write
file descriptors.

To retain compatiblity and similar "API feel" with start_command,
we require start_async callers to set .out = -1 to get a readable
file descriptor.  If either of .in or .out is 0, we supply no file
descriptor to the async process.

[sp: Note: Erik started this patch, and a huge bulk of it is
     his work.  All bugs were introduced later by Shawn.]

Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-05 20:57:22 -08:00
Shawn O. Pearce 4f41b61148 run-command: Allow stderr to be a caller supplied pipe
Like .out, .err may now be set to a file descriptor > 0, which
is a writable pipe/socket/file that the child's stderr will be
redirected into.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-05 20:57:16 -08:00
Jeff King 8dba1e634a run-command: add "use shell" option
Many callsites run "sh -c $CMD" to run $CMD. We can make it
a little simpler for them by factoring out the munging of
argv.

For simple cases with no arguments, this doesn't help much, but:

  1. For cases with arguments, we save the caller from
     having to build the appropriate shell snippet.

  2. We can later optimize to avoid the shell when
     there are no metacharacters in the program.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-01 17:53:46 -08:00
Frank Li 71064e3f86 Test for WIN32 instead of __MINGW32_
The code which is conditional on MinGW32 is actually conditional on Windows.
Use the WIN32 symbol, which is defined by the MINGW32 and MSVC environments,
but not by Cygwin.

Define SNPRINTF_SIZE_CORR=1 for MSVC too, as its vsnprintf function does
not add NUL at the end of the buffer if the result fits the buffer size
exactly.

Signed-off-by: Frank Li <lznuaa@gmail.com>
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-09-18 20:00:42 -07:00
Johannes Sixt c024beb56d run_command: report failure to execute the program, but optionally don't
In the case where a program was not found, it was still the task of the
caller to report an error to the user. Usually, this is an interesting case
but only few callers actually reported a specific error (though many call
sites report a generic error message regardless of the cause).

With this change the error is reported by run_command, but since there is
one call site in git.c that does not want that, an option is added to
struct child_process, which is used to turn the error off.

Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-06 02:45:50 -07:00
Johannes Sixt 0ac77ec315 run_command: report system call errors instead of returning error codes
The motivation for this change is that system call failures are serious
errors that should be reported to the user, but only few callers took the
burden to decode the error codes that the functions returned into error
messages.

If at all, then only an unspecific error message was given. A prominent
example is this:

   $ git upload-pack . | :
   fatal: unable to run 'git-upload-pack'

In this example, git-upload-pack, the external command invoked through the
git wrapper, dies due to SIGPIPE, but the git wrapper does not bother to
report the real cause. In fact, this very error message is copied to the
syslog if git-daemon's client aborts the connection early.

With this change, system call failures are reported immediately after the
failure and only a generic failure code is returned to the caller. In the
above example the error is now to the point:

   $ git upload-pack . | :
   error: git-upload-pack died of signal

Note that there is no error report if the invoked program terminated with
a non-zero exit code, because it is reasonable to expect that the invoked
program has already reported an error. (But many run_command call sites
nevertheless write a generic error message.)

There was one special return code that was used to identify the case where
run_command failed because the requested program could not be exec'd. This
special case is now treated like a system call failure with errno set to
ENOENT. No error is reported in this case, because the call site in git.c
expects this as a normal result. Therefore, the callers that carefully
decoded the return value still check for this condition.

Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-06 02:44:49 -07:00
Johannes Sixt 5709e0363a run_command: return exit code as positive value
As a general guideline, functions in git's code return zero to indicate
success and negative values to indicate failure. The run_command family of
functions followed this guideline. But there are actually two different
kinds of failure:

- failures of system calls;

- non-zero exit code of the program that was run.

Usually, a non-zero exit code of the program is a failure and means a
failure to the caller. Except that sometimes it does not. For example, the
exit code of merge programs (e.g. external merge drivers) conveys
information about how the merge failed, and not all exit calls are
actually failures.

Furthermore, the return value of run_command is sometimes used as exit
code by the caller.

This change arranges that the exit code of the program is returned as a
positive value, which can now be regarded as the "result" of the function.
System call failures continue to be reported as negative values.

Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-05 12:16:27 -07:00
Jeff King fd94836923 fix portability problem with IS_RUN_COMMAND_ERR
Some old versions of gcc don't seem to like us negating an
enum constant. Let's work around it by negating the other
half of the comparison instead.

Reported by Pierre Poissinger on gcc 2.9.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-01 11:05:54 -07:00
Junio C Hamano 1487eb68f7 Merge branch 'jk/maint-cleanup-after-exec-failure'
* jk/maint-cleanup-after-exec-failure:
  git: use run_command() to execute dashed externals
  run_command(): help callers distinguish errors
  run_command(): handle missing command errors more gracefully
  git: s/run_command/run_builtin/
2009-02-03 00:26:12 -08:00
Jeff King 1d64f21d99 run_command(): help callers distinguish errors
run_command() returns a single integer specifying either an
error code or the exit status of the spawned program. The
only way to tell the difference is that the error codes are
outside of the allowed range of exit status values.

Rather than make each caller implement the test against a
magic limit, let's provide a macro.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-28 14:09:35 -08:00
Stephan Beyer ae98a0089f Move run_hook() from builtin-commit.c into run-command.c (libgit)
A function that runs a hook is used in several Git commands.
builtin-commit.c has the one that is most general for cases without
piping. The one in builtin-gc.c prints some useful warnings.
This patch moves a merged version of these variants into libgit and
lets the other builtins use this libified run_hook().

The run_hook() function used in receive-pack.c feeds the standard
input of the pre-receive or post-receive hooks. This function is
renamed to run_receive_hook() because the libified run_hook() cannot
handle this.

Mentored-by: Daniel Barkalow <barkalow@iabervon.org>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-17 17:16:24 -08:00
Nanako Shiraishi 7996ff335e run-command.c: remove run_command_v_opt_cd()
This function is not used anywhere.

Johannes Sixt <johannes.sixt@telecom.at>:
> Future callers can use run_command_v_opt_cd_env() instead.

Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-10-02 18:02:44 -07:00
Jeff King ccf08bc3d0 run-command: add pre-exec callback
This is a function provided by the caller which is called
_after_ the process is forked, but before the spawned
program is executed. On platforms (like mingw) where
subprocesses are forked and executed in a single call, the
preexec callback is simply ignored.

This will be used in the following patch to do some setup
for 'less' that must happen in the forked child.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-25 21:29:44 -07:00
Johannes Sixt 618ebe9ff9 Windows: Implement asynchronous functions as threads.
In upload-pack we must explicitly close the output channel of rev-list.
(On Unix, the channel is closed automatically because process that runs
rev-list terminates.)

Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
2008-06-26 08:45:08 +02:00
Johannes Sixt c20181e3a3 start_command(), if .in/.out > 0, closes file descriptors, not the callers
Callers of start_command() can set the members .in and .out of struct
child_process to a value > 0 to specify that this descriptor is used as
the stdin or stdout of the child process.

Previously, if start_command() was successful, this descriptor was closed
upon return. Here we now make sure that the descriptor is also closed in
case of failures. All callers are updated not to close the file descriptor
themselves after start_command() was called.

Note that earlier run_gpg_verify() of git-verify-tag set .out = 1, which
worked because start_command() treated this as a special case, but now
this is incorrect because it closes the descriptor. The intent here is to
inherit stdout to the child, which is achieved by .out = 0.

Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-23 11:59:44 -08:00
Johannes Sixt e72ae28895 start_command(), .in/.out/.err = -1: Callers must close the file descriptor
By setting .in, .out, or .err members of struct child_process to -1, the
callers of start_command() can request that a pipe is allocated that talks
to the child process and one end is returned by replacing -1 with the
file descriptor.

Previously, a flag was set (for .in and .out, but not .err) to signal
finish_command() to close the pipe end that start_command() had handed out,
so it was optional for callers to close the pipe, and many already do so.
Now we make it mandatory to close the pipe.

Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-23 11:59:44 -08:00
Shawn O. Pearce b73a439759 run-command: Support sending stderr to /dev/null
Some callers may wish to redirect stderr to /dev/null in some
contexts, such as if they are executing a command only to get
the exit status and don't want users to see whatever output it
may produce as a side-effect of computing that exit status.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 17:09:55 -08:00
Johannes Sixt 2d22c20830 Add infrastructure to run a function asynchronously.
This adds start_async() and finish_async(), which runs a function
asynchronously. Communication with the caller happens only via pipes.
For this reason, this implementation forks off a child process that runs
the function.

[sp: Style nit fixed by removing unnecessary block on if condition
     inside of start_async()]

Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-10-21 01:30:41 -04:00
Johannes Sixt f3b33f1d22 Have start_command() create a pipe to read the stderr of the child.
This adds another stanza that allocates a pipe that is connected to the
child's stderr and that the caller can read from. In order to request this
pipe, the caller sets cmd->err to -1.

The implementation is not exactly modeled after the stdout case: For stdout
the caller can supply an existing file descriptor, but this facility is
nowhere needed in the stderr case. Additionally, the caller is required to
close cmd->err.

Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-10-21 01:30:40 -04:00
Alex Riesen 3427b375b5 Allow environment variables to be unset in the processes started by run_command
To unset a variable, just specify its name, without "=". For example:

    const char *env[] = {"GIT_DIR=.git", "PWD", NULL};
    const char *argv[] = {"git-ls-files", "-s", NULL};
    int err = run_command_v_opt_cd_env(argv, RUN_GIT_CMD, ".", env);

The PWD will be unset before executing git-ls-files.

Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-23 22:38:44 -07:00
Alex Riesen ee4931486b Add ability to specify environment extension to run_command
There is no way to specify and override for the environment:
there'd be no user for it yet.

Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-23 22:38:44 -07:00
Alex Riesen 1568fea01e Add run_command_v_opt_cd: chdir into a directory before exec
It can make code simplier (no need to preserve cwd) and safer
(no chance the cwd of the current process is accidentally forgotten).

Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-23 22:38:44 -07:00