The linked list describing sort options was not correctly set up in
opt_parse_sort. In the result, contrary to the documentation, only the
last of multiple --sort options to git-for-each-ref was taken into
account. This commit fixes it.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation of git-for-each-ref says that --sort=<key> option can be
used multiple times, in which case the last key becomes the primary key.
However this functionality was never checked in test suite and is
currently broken. This commit adds appropriate test in preparation for fix.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One fictitious command "proxy-command" is enclosed inside a double
quote pair, while another fictitious command "default-proxy" is not
in the example, but the quoting does not change anything in the pair
of examples. Remove the quotes to avoid unnecessary confusion.
Noticed by Michael Haggerty.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--add" option is required to add a new value to a multivalued
configuration entry.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"stash apply" directly calls a backend merge function which does not
automatically invoke rerere. This confuses mergetool when leftover
rerere state is left behind from previous merges.
Invoke rerere explicitly when we encounter a conflict during stash
apply. This turns the test introduced by the previous commit to
succeed.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test to make sure that a conflicted "stash apply" invokes
rerere to record the conflicts and resolve the the files it can
(the current code doesn't, so the test is marked as failing).
Without correct state recorded for rerere, mergetool may be
confused, causing it to think no files have conflicts even though
they do. This condition is not verified by this test since a
subsequent commit will change the behavior to enable rerere for
stash conflicts.
Also, the next test expected us to finish up with a reset, which is
impossible to do if we fail (as we must) and it's an unreasonable
expectation anyway. Begin the next test with a reset of its own
instead.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Letting the "--rebase" option squat on the short-and-sweet single
letter option "-r" was an unintended accident and was not even
documented, but the short option seems to be already used in the
wild. Let's document it so that other options that begin with "r"
would not be tempted to steal it.
Signed-off-by: Miklos Vajna <vmiklos@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was unclear what "--topo-order" was really about in the
documentation. It is not just about "children before parent", but
also about "don't mix lineages".
Reword the description for both "--date-order" and "--topo-order",
and add an illustration to it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When gitweb is used as a DirectoryIndex, it attempts to strip
PATH_INFO on its own, as $cgi->url() fails to do so.
However, it fails to account for the fact that PATH_INFO has
already been URL-decoded by the web server, but the value
returned by $cgi->url() has not been. This causes the stripping
to fail whenever the URL contains encoded characters.
To see this in action, setup gitweb as a DirectoryIndex and
then use it on a repository with a directory containing a
space in the name. Navigate to tree view, examine the gitweb
generated html and you'll see a link such as:
<a href="/test.git/tree/HEAD:/directory with spaces">directory with spaces</a>
When clicked on, the browser will URL-encode this link, giving
a $cgi->url() of the form:
/test.git/tree/HEAD:/directory%20with%20spaces
While PATH_INFO is:
/test.git/tree/HEAD:/directory with spaces
Fix this by calling unescape() on both $my_url and $my_uri before
stripping PATH_INFO from them.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In earlier days, "imitate the style in the neibouring code" was
sufficient to keep the coherent style, but over time some parts of
the codebase have drifted enough to make it ineffective.
Spell some of the guidelines out.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various subcommands of the "git submodule" command exited with 0
status even though the path given by the user did not exist.
The reason behind that was that they all pipe the output of
module_list into the while loop which then does the action on the
paths specified by the commandline. Since the exit code of the
command on the upstream side of the pipe is ignored by the shell,
the status code of "ls-files --error-unmatch" nor "module_list" was
not propagated.
In case ls-files returns with an error code, we write a special
string that is not possible in non error situations, and no other
output, so that the downstream can detect the error and die with an
error code.
The error message that there is an unmatched pathspec comes through
stderr directly from ls-files. So the user still gets a hint whats going
on.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git rebase' uses the full onto sha1 for the reflog message whereas 'git
rebase -i' uses the short sha1. This is not only inconsistent, but can
lead to problems when the reflog is inspected at a later time at which
that abbreviation may have become ambiguous.
Make 'rebase -i' use the full onto sha1, as well.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test cases for 'git rebase --keep-empty' with and without an
"empty" commit already in upstream. The empty commit that is about to
be rebased should be kept in both cases.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many scripted Porcelains rely on being able to split words at the
default $IFS characters, i.e. SP, HT and LF. If the user exports a
non-default IFS to the environment, what they read from plumbing
commands such as ls-files that use HT to delimit fields may not be
split in the way we expect.
Protect outselves by resetting it, just like we do so against CDPATH
exported to the environment.
Noticed by Andrew Dranse <adranse@oanda.com>.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When asciidoc converts a listing block like:
----------------------
$ git log --merge
----------------------
it marks it to be displayed in a monospace font. This works
fine when generating HTML output. However, when generating
docbook output, we override the expansion of a listingblock
to work around bugs in some versions of the docbook
toolchain. Our override did not mark the listingblock with
the "monospaced" class.
The main output that uses docbook as an intermediate format
is the manpages. We didn't notice any issue there because
the monospaced class seems to be ignored when generating
roff from the docbook manpages.
However, when generating texinfo to make info pages, docbook
does respect this class. The resulting texinfo output
properly uses "@example" blocks to display the listing in
this case. Besides possibly looking prettier in some texinfo
backends, one important effect is that the monospace font
suppresses texinfo's expansion of "--" and "---" into
en-dashes and em-dashes. With the current code, the example
above ends up looking like "git log -merge", which is
confusing and wrong.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The standard output channel of receive-pack is a structured protocol
channel, and subprocesses must never be allowed to leak anything
into it by writing to their standard output.
Use RUN_COMMAND_STDOUT_TO_STDERR option to run_command_v_opt() just
like we do when running hooks to prevent output from "gc" leaking to
the standard output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receive-pack triggers 'git gc --auto' and 'git prune' is called to
remove a stale temporary object, 'git prune' prints an informational
message to stdout about the file that it will remove. Since this message
is written to stdout, it is sent back over the transport channel to the git
client which tries to interpret it as part of the pack protocol and then
promptly terminates with a complaint about a protocol error.
Introduce a test which exercises the auto-gc functionality of receive-pack
and demonstrates this breakage.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that git_terminal_prompt can cleanly interact with /dev/tty on
Solaris, enable HAVE_DEV_TTY so that this code path is used for
credential reading instead of relying on the crippled getpass().
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a stdio stream is opened in update mode (e.g., "w+"),
the C standard forbids switching between reading or writing
without an intervening positioning function. Many
implementations are lenient about this, but Solaris libc
will flush the recently-read contents to the output buffer.
In this instance, that meant writing the non-echoed password
that the user just typed to the terminal.
Fix it by inserting a no-op fseek between the read and
write.
The opposite direction (writing followed by reading) is also
disallowed, but our intervening fflush is an acceptable
positioning function for that alternative.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/block-sha1:
Makefile: BLK_SHA1 does not require fast htonl() and unaligned loads
block-sha1: put expanded macro parameters in parentheses
block-sha1: avoid pointer conversion that violates alignment constraints
* lm/git-blame-el:
git-blame.el: Do not use bare 0 to mean (point-min)
git-blame.el: Use with-current-buffer where appropriate
git-blame.el: Do not use goto-line in lisp code
- (glossary) the quotes around the Wikipedia URL prevented its
linkification in frontends that support it; remove them
- (manual) newer version (SHA-1) == following, older == preceding, not
the other way around
- trivial typo and wording fixes
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is an implementation detail that a new tag is created by adding a
file in the .git/refs/tags directory. The only thing the user needs
to know is that a "git tag" creates a ref in the refs/tags namespace,
and without "-f", it does not overwrite an existing tag.
Inspired by a report from 乙酸鋰 <ch3cooli@gmail.com>; I think I
caught all the existing mention in Documentation/ directory in the
tip of 1.7.9.X maintenance track, but we may have added new ones
since then.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These assignments comes from the very first commit e83c516 (Initial
revision of "git", the information manager from hell - 2005-04-07).
Back then we did not die() when errors happened so correct errno was
required.
Since 5d1a5c0 ([PATCH] Better error reporting for "git status" -
2005-10-01), read_index_from() learned to die rather than just return
-1 and these assignments became irrelevant. Remove them.
While at it, move die_errno() next to xmmap() call because it's the
mmap's error code that we care about. Otherwise if close(fd); fails,
it could overwrite mmap's errno.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It hasn't been used since 2006, as of commit 3cd4f5e8
"git-apply --binary: clean up and prepare for --reverse"
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a file that ends with an incomplete line is expressed as a
complete rewrite with the -B option, git diff incorrectly
appends the incomplete line indicator "\ No newline at end of
file" after such a line, rather than writing it on a line of its
own (the output codepath for normal output without -B does not
have this problem). Add a LF after the incomplete line before
writing the "\ No newline ..." out to fix this.
Add a couple of tests to confirm that the indicator comment is
generated on its own line in both plain diff and rewrite mode.
Signed-off-by: Adam Butcher <dev.lists@jessamine.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King wrote:
The seq command is GNU-ism, and is missing at least in older BSD
releases and their derivatives, not to mention antique
commercial Unixes.
We already purged it in b3431bc (Don't use seq in tests, not
everyone has it, 2007-05-02), but a few new instances have crept
in. They went unnoticed because they are in scripts that are not
run by default.
Replace them with test_seq that is implemented with a Perl snippet
(proposed by Jeff). This is better than inlining this snippet
everywhere it's needed because it's easier to read and it's easier
to change the implementation (e.g. to C) if we ever decide to remove
Perl from the test suite.
Note that test_seq is not a complete replacement for seq(1). It
just has what we need now, in addition that it makes it possible for
us to do something like "test_seq a m" if we wanted to in the
future.
There are also many places that do `for i in 1 2 3 ...` but I'm not sure
if it's worth converting them to test_seq. That would introduce running
more processes of Perl.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
flush_buffer() is a thin wrapper around write_in_full() with two very
confusing properties:
* It runs a loop to handle short reads, ensuring that we write
everything. But that is precisely what write_in_full() does!
* It checks for a return value of 0 from write_in_full(), which cannot
happen: it returns this value only if count=0, but flush_buffer()
will never call write_in_full() in this case.
Remove it.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff_setup_done() has historically returned an error code, but lost
the last nonzero return in 943d5b7 (allow diff.renamelimit to be set
regardless of -M/-C, 2006-08-09). The callers were in a pretty
confused state: some actually checked for the return code, and some
did not.
Let it return void, and patch all callers to take this into account.
This conveniently also gets rid of a handful of different(!) error
messages that could never be triggered anyway.
Note that the function can still die().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous "Use '--' to separate filenames from revisions" may sound
obvious for an old-time Unix user, but does not make it clear how to use
this '--'. In addition to mentionning this '--', give an idea of what the
new command should look like.
Ideally, we could provide cut-and-paste ready commands based on the
command that just failed, but we have no easy access to argv[] in this
place of the code.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The RFC2047 unquoting, used to parse email addresses in From and Cc
headers, is broken in several ways:
* It erroneously substitutes ' ' for '_' in *the whole* header, even
outside the quoted field. [Noticed by Christoph.]
* It is too liberal in its matching, and happily matches the start
of one quoted chunk against the end of another, or even just
something that looks like such an end. [Noticed by Junio.]
* It fundamentally cannot cope with encodings that are not a
superset of ASCII, nor several (incompatible) encodings in the
same header.
This patch fixes the first two by doing a more careful decoding of
the outer quoting (e.g. "=AB" to represent an octet whose value is
0xAB). Fixing the fundamental issues is left for a future, more
intrusive, patch.
Noticed-by: Christoph Miebach <christoph.miebach@web.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have a non-directory on your PATH, a funny thing happens:
$ PATH=$PATH:/bin/sh git foo
fatal: cannot exec 'git-foo': Not a directory?
Worse yet, as real commands always take precedence over aliases,
this behaviour interacts rather badly with them:
$ PATH=$PATH:/bin/sh git -c alias.foo=show git foo -s
fatal: cannot exec 'git-foo': Not a directory?
This is because an ENOTDIR error from the underlying execvp(2) is
reported back to the caller of our sane_execvp() wrapper as-is.
Translating it to ENOENT, just like the case where we _might_ have
the command in an unreadable directory, fixes it. Without an alias,
we would get
git: 'foo' is not a git command. See 'git --help'.
and we use the 'foo' alias when it is available, of course.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"$GIT_DIR/COMMIT_EDITMSG" file that is used to hold the commit log
message user edits was not documented.
* jk/maint-commit-document-editmsg:
commit: document the temporary commit message file
The advise() function did not use varargs correctly to format
its message.
* jk/maint-advise-vaddf:
advice: pass varargs to strbuf_vaddf, not strbuf_addf
"git commit-tree" learned a more natural "-p <parent> <tree>" order
of arguments long time ago, but recently forgot it by mistake.
* kk/maint-commit-tree:
Revert "git-commit-tree(1): update synopsis"
commit-tree: resurrect command line parsing updates
"git diff --no-ext-diff" did not output anything for a typechange
filepair when GIT_EXTERNAL_DIFF is in effect.
* jv/maint-no-ext-diff:
diff: test precedence of external diff drivers
diff: correctly disable external_diff with --no-ext-diff
Kacper Kornet
Junio C Hamano
Michael Haggerty
Phil Hord
Miklos Vajna
Jay Soffian
Heiko Voigt
Michael J Gruber
Martin von Zweigbergk
Jeff King
Brandon Casey
Ben Walton
Štěpán Němec
Nguyễn Thái Ngọc Duy
Paul Gortmaker
Adam Butcher
Michał Kiedrowicz
Thomas Rast
Matthieu Moy