As with git-rebase(1) and git-am(1), git-cherry-pick(1) can result in a
commit being made redundant if the content from the picked commit is
already present in the target history. However, git-cherry-pick(1) does
not have the same options available that git-rebase(1) and git-am(1) have.
There are three things that can be done with these redundant commits:
drop them, keep them, or have the cherry-pick stop and wait for the user
to take an action. git-rebase(1) has the `--empty` option added in commit
e98c4269c8 (rebase (interactive-backend): fix handling of commits that
become empty, 2020-02-15), which handles all three of these scenarios.
Similarly, git-am(1) got its own `--empty` in 7c096b8d61 (am: support
--empty=<option> to handle empty patches, 2021-12-09).
git-cherry-pick(1), on the other hand, only supports two of the three
possiblities: Keep the redundant commits via `--keep-redundant-commits`,
or have the cherry-pick fail by not specifying that option. There is no
way to automatically drop redundant commits.
In order to bring git-cherry-pick(1) more in-line with git-rebase(1) and
git-am(1), this commit adds an `--empty` option to git-cherry-pick(1). It
has the same three options (keep, drop, and stop), and largely behaves
the same. The notable difference is that for git-cherry-pick(1), the
default will be `stop`, which maintains the current behavior when the
option is not specified.
Like the existing `--keep-redundant-commits`, `--empty=keep` will imply
`--allow-empty`.
The `--keep-redundant-commits` option will be documented as a deprecated
synonym of `--empty=keep`, and will be supported for backwards
compatibility for the time being.
Signed-off-by: Brian Lyles <brianmlyles@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `--keep-redundant-commits` was added in b27cfb0d8d
(git-cherry-pick: Add keep-redundant-commits option, 2012-04-20), it was
not marked as incompatible with the various operations needed to
continue or exit a cherry-pick (`--continue`, `--skip`, `--abort`, and
`--quit`).
Enforce this incompatibility via `verify_opt_compatible` like we do for
the other various options.
Signed-off-by: Brian Lyles <brianmlyles@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
alloc_nr, ALLOC_GROW, and ALLOC_GROW_BY are commonly used macros for
dynamic array allocation. Moving these macros to git-compat-util.h with
the other alloc macros focuses alloc.[ch] to allocation for Git objects
and additionally allows us to remove inclusions to alloc.h from files
that solely used the above macros.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also made it clear that several .c files depended upon various
things that oidset included, but had omitted the direct #include for
those headers. Add those now.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clean-up of the code path that deals with merge strategy option
handling in "git rebase".
* pw/rebase-cleanup-merge-strategy-option-handling:
rebase: remove a couple of redundant strategy tests
rebase -m: fix serialization of strategy options
rebase -m: cleanup --strategy-option handling
sequencer: use struct strvec to store merge strategy options
rebase: stop reading and writing unnecessary strategy state
The sequencer stores the merge strategy options in an array of strings
which allocated with ALLOC_GROW(). Using "struct strvec" avoids manually
managing the memory of that array and simplifies the code.
Aside from memory allocation the changes to the sequencer are largely
mechanical, changing xopts_nr to xopts.nr and xopts[i] to xopts.v[i]. A
new option parsing macro OPT_STRVEC() is also added to collect the
strategy options. Hopefully this can be used to simplify the code in
builtin/merge.c in the future.
Note that there is a change of behavior to "git cherry-pick" and "git
revert" as passing “--no-strategy-option” will now clear any previous
strategy options whereas before this change it did nothing.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split key function and data structure definitions out of cache.h to
new header files and adjust the users.
* en/header-split-cleanup:
csum-file.h: remove unnecessary inclusion of cache.h
write-or-die.h: move declarations for write-or-die.c functions from cache.h
treewide: remove cache.h inclusion due to setup.h changes
setup.h: move declarations for setup.c functions from cache.h
treewide: remove cache.h inclusion due to environment.h changes
environment.h: move declarations for environment.c functions from cache.h
treewide: remove unnecessary includes of cache.h
wrapper.h: move declarations for wrapper.c functions from cache.h
path.h: move function declarations for path.c functions from cache.h
cache.h: remove expand_user_path()
abspath.h: move absolute path functions from cache.h
environment: move comment_line_char from cache.h
treewide: remove unnecessary cache.h inclusion from several sources
treewide: remove unnecessary inclusion of gettext.h
treewide: be explicit about dependence on gettext.h
treewide: remove unnecessary cache.h inclusion from a few headers
Our builtins receive a "prefix" argument as part of their cmd_foo()
function. We should always pass this to parse_options() if we're calling
it, as it may be used for OPT_FILENAME() options.
In the cases here, there's no option that would use it, so we're not
fixing any bug. This is just future-proofing and setting a good example
(plus quelling some -Wunused-parameter warnings).
Note in the case of revert/cherry-pick, that we plumb the prefix through
to run_sequencer(), as those builtins are just thin wrappers around it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In [1] and [2] I added the code being moved here to cmd_revert() and
cmd_cherry_pick(), now that we've got a "replay_opts_release()" for
the "struct replay_opts" it should know how to free these "revs",
rather than having these users reach into the struct to free its
individual members.
1. d1ec656d68 (cherry-pick: free "struct replay_opts" members,
2022-11-08)
2. fd74ac95ac (revert: free "struct replay_opts" members, 2022-07-01)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the replay_opts_release() function added in the preceding commit
non-static, and use it for freeing the "struct replay_opts"
constructed for "rebase" and "revert".
To safely call our new replay_opts_release() we'll need to stop
calling it in sequencer_remove_state(), and instead call it where we
allocate the "struct replay_opts" itself.
This is because in e.g. do_interactive_rebase() we construct a "struct
replay_opts" with "get_replay_opts()", and then call
"complete_action()". If we get far enough in that function without
encountering errors we'll call "pick_commits()" which (indirectly)
calls sequencer_remove_state() at the end.
But if we encounter errors anywhere along the way we'd punt out early,
and not free() the memory we allocated. Remembering whether we
previously called sequencer_remove_state() would be a hassle.
Using a FREE_AND_NULL() pattern would also work, as it would be safe
to call replay_opts_release() repeatedly. But let's fix this properly
instead, by having the owner of the data free() it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various leak fixes.
* ab/various-leak-fixes:
built-ins: use free() not UNLEAK() if trivial, rm dead code
revert: fix parse_options_concat() leak
cherry-pick: free "struct replay_opts" members
rebase: don't leak on "--abort"
connected.c: free the "struct packed_git"
sequencer.c: fix "opts->strategy" leak in read_strategy_opts()
ls-files: fix a --with-tree memory leak
revision API: call graph_clear() in release_revisions()
unpack-file: fix ancient leak in create_temp_file()
built-ins & libs & helpers: add/move destructors, fix leaks
dir.c: free "ident" and "exclude_per_dir" in "struct untracked_cache"
read-cache.c: clear and free "sparse_checkout_patterns"
commit: discard partial cache before (re-)reading it
{reset,merge}: call discard_index() before returning
tests: mark tests as passing with SANITIZE=leak
Free memory from parse_options_concat(), which comes from code
originally added (then extended) in [1].
At this point we could get several more tests leak-free by free()-ing
the xstrdup() just above the line being changed, but that one's
trickier than it seems. The sequencer_remove_state() function
supposedly owns it, but sometimes we don't call it. I have a fix for
it, but it's non-trivial, so let's fix the easy one first.
1. c62f6ec341 (revert: add --ff option to allow fast forward when
cherry-picking, 2010-03-06)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Call the release_revisions() function added in
1878b5edc0 (revision.[ch]: provide and start using a
release_revisions(), 2022-04-13) in cmd_cherry_pick(), as well as
freeing the xmalloc()'d "revs" member itself.
This is the same change as the one made for cmd_revert() a few lines
above it in fd74ac95ac (revert: free "struct replay_opts" members,
2022-07-01).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Fix various issues of SYNOPSIS and -h output syntax where:
* Options such as --force were missing entirely
* ...or the short option, such as -f
* We said "opts" or "options", but could instead enumerate
the (small) set of supported options
* Options that were missing entirely (ls-remote's --sort=<key>)
As we can specify "--sort" multiple times (it's backed by a
string-list" it should really be "[(--sort=<key>)...]", which is
what "git for-each-ref" lists it as, but let's leave that issue for
a subsequent cleanup, and stop at making these consistent. Other
"ref-filter.h" users share the same issue, e.g. "git-branch.txt".
* For "verify-tag" and "verify-commit" we were missing the "--raw"
option.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of 'PARSE_OPT_KEEP_UNKNOWN' starts with "Keep unknown
arguments instead of erroring out". This is a bit misleading, as this
flag only applies to unknown --options, while non-option arguments are
kept even without this flag.
Update the description to clarify this, and rename the flag to
PARSE_OPTIONS_KEEP_UNKNOWN_OPT to make this obvious just by looking at
the flag name.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call the release_revisions() function added in
1878b5edc0 (revision.[ch]: provide and start using a
release_revisions(), 2022-04-13) in cmd_revert(), as well as freeing
the xmalloc()'d "revs" member itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As 'revert' and 'cherry-pick' share a lot of code, it is easy to
modify the behaviour of one command and inadvertently affect the
other. An earlier change to teach the '--reference' option and the
'revert.reference' configuration variable to the former was not
careful enough and 'cherry-pick --reference' wasn't rejected as an
error.
It is possible to think 'cherry-pick -x' might benefit from the
'--reference' option, but it is fundamentally different from
'revert' in at least two ways to make it questionable:
- 'revert' names a commit that is ancestor of the resulting commit,
so an abbreviated object name with human readable title is
sufficient to identify the named commit uniquely without using
the full object name. On the other hand, 'cherry-pick'
usually [*] picks a commit that is not an ancestor. It might be
even picking a private commit that never becomes part of the
public history.
- The whole commit message of 'cherry-pick' is a copy of the
original commit, and there is nothing gained to repeat only the
title part on 'cherry-picked from' message.
[*] well, you could revert and then you can pick the original that
was reverted to get back to where you were, but then you can
revert the revert to do the same thing.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A typical "git revert" commit uses the full title of the original
commit in its title, and starts its body of the message with:
This reverts commit 8fa7f667cf61386257c00d6e954855cc3215ae91.
This does not encourage the best practice of describing not just
"what" (i.e. "Revert X" on the title says what we did) but "why"
(i.e. and it does not say why X was undesirable).
We can instead phrase this first line of the body to be more like
This reverts commit 8fa7f667 (do this and that, 2022-04-25)
so that the title does not have to be
Revert "do this and that"
We can instead use the title to describe "why" we are reverting the
original commit.
Introduce the "--reference" option to "git revert", and also the
revert.reference configuration variable, which defaults to false, to
tweak the title and the first line of the draft commit message for
when creating a "revert" commit.
When this option is in use, the first line of the pre-filled editor
buffer becomes a comment line that tells the user to say _why_. If
the user exits the editor without touching this line by mistake,
what we prepare to become the first line of the body, i.e. "This
reverts commit 8fa7f667 (do this and that, 2022-04-25)", ends up to
be the title of the resulting commit. This behaviour is designed to
help such a user to identify such a revert in "git log --oneline"
easily so that it can be further reworded with "git rebase -i" later.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various mergy operations have been prepared to work efficiently
with the sparse index.
* ds/mergies-with-sparse-index:
sparse-index: integrate with cherry-pick and rebase
sequencer: ensure full index if not ORT strategy
t1092: add cherry-pick, rebase tests
merge-ort: expand only for out-of-cone conflicts
merge: make sparse-aware with ORT
diff: ignore sparse paths in diffstat
The hard work was already done with 'git merge' and the ORT strategy.
Just add extra tests to see that we get the expected results in the
non-conflict cases.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--no-walk` flag supports two modes: either it sorts the revisions
given as input input or it doesn't. This is reflected in a single
`no_walk` flag, which reflects one of the three states "walk", "don't
walk but without sorting" and "don't walk but with sorting".
Split up the flag into two separate bits, one indicating whether we
should walk or not and one indicating whether the input should be sorted
or not. This will allow us to more easily introduce a new flag
`--unsorted-input`, which only impacts the sorting bit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
save_opts() should save any non-default values. It was intended to do
this, but since most options in struct replay_opts default to 0, it only
saved non-zero values. Unfortunately, this does not always work for
options.edit. Roughly speaking, options.edit had a default value of 0
for cherry-pick but a default value of 1 for revert. Make save_opts()
record a value whenever it differs from the default.
options.edit was also overly simplistic; we had more than two cases.
The behavior that previously existed was as follows:
Non-conflict commits Right after Conflict
revert Edit iff isatty(0) Edit (ignore isatty(0))
cherry-pick No edit See above
Specify --edit Edit (ignore isatty(0)) See above
Specify --no-edit (*) See above
(*) Before stopping for conflicts, No edit is the behavior. After
stopping for conflicts, the --no-edit flag is not saved so see
the first two rows.
However, the expected behavior is:
Non-conflict commits Right after Conflict
revert Edit iff isatty(0) Edit iff isatty(0)
cherry-pick No edit Edit iff isatty(0)
Specify --edit Edit (ignore isatty(0)) Edit (ignore isatty(0))
Specify --no-edit No edit No edit
In order to get the expected behavior, we need to change options.edit
to a tri-state: unspecified, false, or true. When specified, we follow
what it says. When unspecified, we need to check whether the current
commit being created is resolving a conflict as well as consulting
options.action and isatty(0). While at it, add a should_edit() utility
function that compresses options.edit down to a boolean based on the
additional information for the non-conflict case.
continue_single_pick() is the function responsible for resuming after
conflict cases, regardless of whether there is one commit being picked
or many. Make this function stop assuming edit behavior in all cases,
so that it can correctly handle !isatty(0) and specific requests to not
edit the commit message.
Reported-by: Renato Botelho <garga@freebsd.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Preparation for a new merge strategy.
* en/merge-ort-api-null-impl:
merge,rebase,revert: select ort or recursive by config or environment
fast-rebase: demonstrate merge-ort's API via new test-tool command
merge-ort-wrappers: new convience wrappers to mimic the old merge API
merge-ort: barebones API of new merge strategy with empty implementation
Allow the testsuite to run where it treats requests for "recursive" or
the default merge algorithm via consulting the environment variable
GIT_TEST_MERGE_ALGORITHM which is expected to either be "recursive" (the
old traditional algorithm) or "ort" (the new algorithm).
Also, allow folks to pick the new algorithm via config setting. It
turns out builtin/merge.c already had a way to allow users to specify a
different default merge algorithm: pull.twohead. Rather odd
configuration name (especially to be in the 'pull' namespace rather than
'merge') but it's there. Add that same configuration to rebase,
cherry-pick, and revert.
This required updating the various callsites that called merge_trees()
or merge_recursive() to conditionally call the new API, so this serves
as another demonstration of what the new API looks and feels like.
There are almost certainly some callsites that have not yet been
modified to work with the new merge algorithm, but this represents the
ones that I have been testing with thus far.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ted reported an old typo in the git-commit.txt and merge-options.txt.
Namely, the phrase "Signed-off-by line" was used without either a
definite nor indefinite article.
Upon examination, it seems that the documentation (including items in
Documentation/, but also option help strings) have been quite
inconsistent on usage when referring to `Signed-off-by`.
First, very few places used a definite or indefinite article with the
phrase "Signed-off-by line", but that was the initial typo that led
to this investigation. So, normalize using either an indefinite or
definite article consistently.
The original phrasing, in Commit 3f971fc425 (Documentation updates,
2005-08-14), is "Add Signed-off-by line". Commit 6f855371a5 (Add
--signoff, --check, and long option-names. 2005-12-09) switched to
using "Add `Signed-off-by:` line", but didn't normalize the former
commit to match. Later commits seem to have cut and pasted from one
or the other, which is likely how the usage became so inconsistent.
Junio stated on the git mailing list in
<xmqqy2k1dfoh.fsf@gitster.c.googlers.com> a preference to leave off
the colon. Thus, prefer `Signed-off-by` (with backticks) for the
documentation files and Signed-off-by (without backticks) for option
help strings.
Additionally, Junio argued that "trailer" is now the standard term to
refer to `Signed-off-by`, saying that "becomes plenty clear that we
are not talking about any random line in the log message". As such,
prefer "trailer" over "line" anywhere the former word fits.
However, leave alone those few places in documentation that use
Signed-off-by to refer to the process (rather than the specific
trailer), or in places where mail headers are generally discussed in
comparison with Signed-off-by.
Reported-by: "Theodore Y. Ts'o" <tytso@mit.edu>
Signed-off-by: Bradley M. Kuhn <bkuhn@sfconservancy.org>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cherry-pick/revert" learned a new "--skip" action.
* ra/cherry-pick-revert-skip:
cherry-pick/revert: advise using --skip
cherry-pick/revert: add --skip option
sequencer: use argv_array in reset_merge
sequencer: rename reset_for_rollback to reset_merge
sequencer: add advice for revert
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
git am or rebase have a --skip flag to skip the current commit if the
user wishes to do so. During a cherry-pick or revert a user could
likewise skip a commit, but needs to use 'git reset' (or in the case
of conflicts 'git reset --merge'), followed by 'git (cherry-pick |
revert) --continue' to skip the commit. This is more annoying and
sometimes confusing on the users' part. Add a `--skip` option to make
skipping commits easier for the user and to make the commands more
consistent.
In the next commit, we will change the advice messages hence finishing
the process of teaching revert and cherry-pick "how to skip commits".
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug where the scissors line is placed after the Conflicts:
section, in the case where a merge conflict occurs and
commit.cleanup = scissors.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After a successful switch, if a merge, cherry-pick or revert is ongoing,
it is canceled. This behavior has been with us from the very early
beginning, soon after git-merge was created but never actually
documented [1]. It may be a good idea to be transparent and tell the
user if some operation is canceled.
I consider this a better way of telling the user than just adding a
sentence or two in git-checkout.txt, which will be mostly ignored
anyway.
PS. Originally I wanted to print more details like
warning: cancelling an in-progress merge from <SHA-1>
which may allow some level of undo if the user wants to. But that seems
a lot more work. Perhaps it can be improved later if people still want
that.
[1] ... and I will try not to argue whether it is a sensible behavior.
There is some more discussion here if people are interested:
CACsJy8Axa5WsLSjiscjnxVK6jQHkfs-gH959=YtUvQkWriAk5w@mail.gmail.com
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note that the_hash_algo stays, even if we can easily replace it with
repo->hash_algo. My reason is I still believe tying hash_algo to a
struct repository is a wrong move. But if I'm wrong, we can always go
for another round of conversion.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we're going to pass 'struct repository *' around most of the
time instead of 'struct index_state *' because most sequencer.c
operations need more than just the index, the_repository is replaced
as well in the functions that now take 'struct repository
*'. the_repository is still present in this file, but total clean up
will be done later. It's not the main focus of this patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce optname() that does the early half of original opterror() to
come up with the name of the option reported back to the user, and use
it to kill opterror(). The callers of opterror() now directly call
error() using the string returned by opterror() instead.
There are a few issues with opterror()
- it tries to assemble an English sentence from pieces. This is not
great for translators because we give them pieces instead of a full
sentence.
- It's a wrapper around error() and needs some hack to let the
compiler know it always returns -1.
- Since it takes a string instead of printf format, one call site has
to assemble the string manually before passing to it.
Using error() directly solves the second and third problems.
It kind helps the first problem as well because "%s does foo" does
give a translator a full sentence in a sense and let them reorder if
needed. But it has limitations, if the subject part has to change
based on the rest of the sentence, that language is screwed. This is
also why I try to avoid calling optname() when 'flags' is known in
advance.
Mark of these strings for translation as well while at there.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cherry-pick --quit" failed to remove CHERRY_PICK_HEAD even
though we won't be in a cherry-pick session after it returns, which
has been corrected.
* nd/cherry-pick-quit-fix:
cherry-pick: fix --quit not deleting CHERRY_PICK_HEAD
--quit is supposed to be --abort but without restoring HEAD. Leaving
CHERRY_PICK_HEAD behind could make other commands mistake that
cherry-pick is still ongoing (e.g. "git commit --amend" will refuse to
work). Clean it too.
For --abort, this job of deleting CHERRY_PICK_HEAD is on "git reset"
so we don't need to do anything else. But let's add extra checks in
--abort tests to confirm.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous config handling relied on global variables, called
git_default_config() even when the key had already been handled by
git_sequencer_config() and did not initialize the diff configuration
variables. Improve this by: i) loading the default values for message
cleanup and gpg signing of commits into struct replay_opts;
ii) restructuring the code to return immediately once a key is
handled; and iii) calling git_diff_basic_config(). Note that
unfortunately it is not possible to return early if the key is handled
by git_gpg_config() as it does not indicate to the caller if the key
has been handled or not.
The sequencer should probably have been calling
git_diff_basic_config() before as it creates a patch when there are
conflicts. The shell version uses 'diff-tree' to create the patch so
calling git_diff_basic_config() should match that. Although 'git
commit' calls git_diff_ui_config() I don't think the output of
print_commit_summary() is affected by anything that is loaded by that
as print_commit_summary() always turns on rename detection so would
ignore the value in the user's configuration anyway. The other values
loaded by git_diff_ui_config() are about the formatting of patches so
are not relevant to print_commit_summary().
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Load default values for message cleanup and gpg signing of commits in
preparation for committing without forking 'git commit'. Note that we
interpret commit.cleanup=scissors to mean COMMIT_MSG_CLEANUP_SPACE to
be consistent with 'git commit'
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cherry-pick and revert should not accept --[no-]rerere-autoupdate once
they have started.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git revert -m 0 $merge_commit" complained that reverting a merge
needs to say relative to which parent the reversion needs to
happen, as if "-m 0" weren't given. The correct diagnosis is that
"-m 0" does not refer to the first parent ("-m 1" does). This has
been fixed.
* jk/cherry-pick-0-mainline:
cherry-pick: detect bogus arguments to --mainline
The cherry-pick and revert commands use OPT_INTEGER() to
parse --mainline. The stock parser is smart enough to reject
non-numeric nonsense, but it doesn't know that parent
counting starts at 1.
Worse, the value "0" is indistinguishable from the unset
case, so a user who assumes the counting is 0-based will get
a confusing message:
$ git cherry-pick -m 0 $merge
error: commit ... is a merge but no -m option was given.
Let's use a custom callback that enforces our range.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The subcommands are used exactly once, at the very beginning of
sequencer_pick_revisions(), to determine what to do. This is an
unnecessary level of indirection: we can simply call the correct
function to begin with. So let's do that.
While at it, ensure that the subcommands return an error code so that
they do not have to die() all over the place (bad practice for library
functions...).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sequencer is our attempt to lib-ify cherry-pick. Yet it behaves
like a one-shot command when it reads its configuration: memory is
allocated and released only when the command exits.
This is kind of okay for git-cherry-pick, which *is* a one-shot
command. All the work to make the sequencer its work horse was
done to allow using the functionality as a library function, though,
including proper clean-up after use.
To remedy that, take custody of the option values in question,
allocating and duping literal constants as needed and freeing them
at end.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brian Lyles
Elijah Newren
Calvin Wan
Junio C Hamano
Phillip Wood
Jeff King
Ævar Arnfjörð Bjarmason
Jean-Noël Avila
SZEDER Gábor
Derrick Stolee
Patrick Steinhardt
Bradley M. Kuhn
Rohit Ashiwal
Denton Liu
Nguyễn Thái Ngọc Duy
Brandon Williams
Johannes Schindelin