* jn/gitweb-manpages:
gitweb: Add gitweb manpages to 'gitweb' package in git.spec
Documentation: Add gitweb config variables to git-config(1)
Documentation: Link to gitweb(1) and gitweb.conf(5) in other manpages
gitweb: Add gitweb(1) manpage for gitweb itself
gitweb: Add gitweb.conf(5) manpage for gitweb configuration files
Most of what is in gitweb.txt it has been pulled directly from the
README and INSTALL files of gitweb.
Current version is somewhat based on structure of SVN::Web manpage
(one of web interfaces for Subversion).
gitweb.conf(5) i.e. gitweb configuration manpage now refers to
appropriate sections in gitweb(1). gitweb/README now refers to
gitweb/INSTALL and gitweb(1) manpage. gitweb/INSTALL now refers to
gitweb.conf(5) and gitweb(1).
Inspired-by: Drew Northup <drew.northup@maine.edu>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much of what is in gitweb.conf.txt has been pulled directly from the
README file of gitweb. The manpage was supplemented with description
of missing gitweb config variables, and with description of gitweb's
%features.
There remains a bit of redundancy, which should be reduced if
possible... but I think some of duplication of information is
inevitable.
[jn: Improved, extended, removed duplicate info from README]
Signed-off-by: Drew Northup <drew.northup@maine.edu>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fixLinks() function adds 'js=1' to each link that does not already
have 'js' query parameter specified. This is used to signal to gitweb
that the browser can actually do javascript when these links are used.
There are two problems with the existing code:
1. URIs with fragment and 'js' query parameter, like e.g.
...foo?js=0#l199
were not recognized as having 'js' query parameter already.
2. The 'js' query parameter, in the form of either '?js=1' or ';js=1'
was appended at the end of URI, even if it included a fragment
(had a hash part). This lead to the incorrect links like this
...foo#l199?js=1
instead of adding query parameter as last part of query, but
before the fragment part, i.e.
...foo?js=1#l199
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code, as is, passes control characters, such as form-feed
(^L) to highlight which then passes it through to the browser. User
agents (web browsers) that support 'application/xhtml+xml' usually
require that web pages declared as XHTML and with this mimetype are
well-formed XML. Unescaped control characters cannot appear within a
contents of a valid XML document.
This will cause the browser to display one of the following warnings:
* Safari v5.1 (6534.50) & Google Chrome v13.0.782.112:
This page contains the following errors:
error on line 657 at column 38: PCDATA invalid Char value 12
Below is a rendering of the page up to the first error.
* Mozilla Firefox 3.6.19 & Mozilla Firefox 5.0:
XML Parsing Error: not well-formed
Location:
http://path/to/git/repo/blah/blah
Both errors were generated by gitweb.perl v1.7.3.4 w/ highlight 2.7
using arch/ia64/kernel/unwind.c from the Linux kernel.
When syntax highlighter is not used, control characters are replaced
by esc_html(), but with syntax highlighter they were passed through to
browser (to_utf8() doesn't remove control characters).
Introduce sanitize() subroutine which strips forbidden characters, but
does not perform HTML escaping, and use it in git_blob() to sanitize
syntax highlighter output for XHTML.
Note that excluding "\t" (U+0009), "\n" (U+000A) and "\r" (U+000D) is
not strictly necessary, atleast for currently the only callsite: "\t"
tabs are replaced by spaces by untabify(), "\n" is stripped from each
line before processing it, and replacing "\r" could be considered
improvement.
Originally-by: Christopher M. Fuhrman <cfuhrman@panix.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/mime-type-with-params:
gitweb: Serve */*+xml 'blob_plain' as text/plain with $prevent_xss
gitweb: Serve text/* 'blob_plain' as text/plain with $prevent_xss
Otherwise the highlight filter would work on a corrupt byte sequence.
Signed-off-by: 张忠山 <zzs213@126.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git config -z -l" that gitweb uses in git_parse_project_config() to
populate %config hash returns section and key names of config
variables in lowercase (they are case insensitive). When checking
%config in git_get_project_config() we have to take it into account.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because of backward compatibility we cannot change gitweb to always
use /etc/gitweb.conf (i.e. even if gitweb_config.perl exists). For
common system-wide settings we therefore need separate configuration
file: /etc/gitweb-common.conf.
Long description:
gitweb currently obtains configuration from the following sources:
1. per-instance configuration file (default: gitweb_conf.perl)
2. system-wide configuration file (default: /etc/gitweb.conf)
If per-instance configuration file exists, then system-wide
configuration is _not used at all_. This is quite untypical and
suprising behavior.
Moreover it is different from way git itself treats /etc/git.conf. It
reads in stuff from /etc/git.conf and then local repos can change or
override things as needed. In fact this is quite beneficial, because
it gives site admins a simple and easy way to give an automatic hint
to a repo about things the admin would like.
On the other hand changing current behavior may lead to the situation,
where something in /etc/gitweb.conf may interfere with unintended
interaction in the local repository. One solution would be to
_require_ to do explicit include; with read_config_file() it is now
easy, as described in gitweb/README (description introduced in this
commit).
But as J.H. noticed we cannot ask people to modify their per-instance
gitweb config file to include system-wide settings, nor we can require
them to do this.
Therefore, as proposed by Junio, for gitweb to have centralized config
elements while retaining backwards compatibility, introduce separate
common system-wide configuration file, by default /etc/gitweb-common.conf
Noticed-by: Drew Northup <drew.northup@maine.edu>
Helped-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Inspired-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-search:
gitweb: Make git_search_* subroutines render whole pages
gitweb: Clean up code in git_search_* subroutines
gitweb: Split body of git_search into subroutines
gitweb: Check permissions first in git_search
* jn/mime-type-with-params:
gitweb: Serve */*+xml 'blob_plain' as text/plain with $prevent_xss
gitweb: Serve text/* 'blob_plain' as text/plain with $prevent_xss
Enhance usability of 'blob_plain' view protection against XSS attacks
(enabled by setting $prevent_xss to true) by serving contents inline
as safe 'text/plain' mimetype where possible, instead of serving with
"Content-Disposition: attachment" to make sure they don't run in
gitweb's security domain.
This patch broadens downgrading to 'text/plain' further, to any
*/*+xml mimetype. This includes:
application/xhtml+xml (*.xhtml, *.xht)
application/atom+xml (*.atom)
application/rss+xml (*.rss)
application/mathml+xm (*.mathml)
application/docbook+xml (*.docbook)
image/svg+xml (*.svg, *.svgz)
Probably most useful is serving XHTML files as text/plain in
'blob_plain' view, directly viewable.
Because file with 'image/svg+xml' mimetype can be compressed SVGZ
file, we have to check if */*+xml really is text file, via '-T $fd'.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of mechanism enabled by setting $prevent_xss to true is 'blob_plain'
view protection. With XSS prevention on, blobs of all types except a
few known safe ones are served with "Content-Disposition: attachment" to
make sure they don't run in our security domain.
Instead of serving text/* type files, except text/plain (and including
text/html), as attachements, downgrade it to text/plain. This way HTML
pages in 'blob_plain' (raw) view would be displayed in browser, but
safely as a source, and not asked to be saved.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-js-blame:
gitweb.js: use setTimeout rather than setInterval in blame_incremental.js
gitweb.js: No need for loop in blame_incremental's handleResponse()
gitweb.js: No need for inProgress in blame_incremental.js
Extract the following parts into separate subroutines:
* finding correct MIME content type for HTML pages (text/html or
application/xhtml+xml?) into get_content_type_html()
* printing <link ...> elements in HTML head into print_header_links()
* printing navigation "breadcrumbs" for given action into
print_nav_breadcrumbs()
* printing search form into print_search_form()
This reduces git_header_html to two pages long (53 lines), making gitweb
code easier to read.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move git_header_html() and git_footer_html() invocation from git_search()
to individual git_search_* subroutines.
While at it, reorganize search-related code a bit, moving invoking of git
commands before any output is generated.
This has the following advantages:
* gitweb now shows an error page if there was unknown search type
(evaluate_and_validate_params checks only that it looks sanely);
remember that we shouldn't call die_error after any output.
* git_search_message is now safe agains die_error in parse_commits
(though this is very unlikely).
* gitweb now can check errors while invoking git commands and show
error page (again, quite unlikely).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace sequence of
$foo .= "bar";
$foo .= "baz";
with
$foo .= "bar" .
"baz";
Use href(-replay=>1, -page=>undef) for first page of a multipl-page view.
Wrap some lines to reduce their length. Some lines still have more than 80
characters, but lines are shorter now.
No functional changes intended.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create separate subroutines for handling each of aspects of searching
the repository:
* git_search_message ('commit', 'author', 'committer')
* git_search_changes ('pickaxe')
* git_search_content_of_files ('grep')
Almost pure code movement (and unindent), which you can check e.g. via
$ git blame -w --date=short -C -C HEAD^..HEAD -- gitweb/gitweb.perl |
grep -C 3 -e '^[^^]' | less -S
No functional changes intended.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check first if relevant features: 'search', 'pickaxe', 'grep', as
appropriate, are enabled before doing anything else in git_search.
This should make git_search code more clear.
While at it, expand a bit error message (e.g. 'Pickaxe' ->
'Pickaxe search').
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both 'pickaxe' (searching changes) and 'grep' (searching files)
require basic 'search' feature to be enabled to work. Enabling
e.g. only 'pickaxe' won't work.
Add a comment about this.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
in openSUSE /etc/mime.types has only spaces. I don't know if there's
a canonical reference that says that only tabs are allowed. Mutt at
least also accepts spaces. So make gitweb more liberal too.
Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.7.6-rc0~27^2~4 (gitweb: Change the way "content tags" ('ctags') are
handled, 2011-04-29) tried to make gitweb's tag cloud feature more
intuitive for webmasters by checking whether the ctags/<label> under
a project's .git dir contains a number (representing the strength of
association to <label>) before treating it as one.
With that change, after putting '$feature{'ctags'}{'default'} = [1];'
in your $GITWEB_CONFIG, you could do
echo Linux >.git/ctags/linux
and gitweb would treat that as a request to tag the current repository
with the Linux tag, instead of the previous behavior of writing an
error page embedded in the projects list that triggers error messages
from Chromium and Firefox about malformed XML.
Unfortunately the pattern (\d+) used to match numbers is too loose,
and the "XML declaration allowed only at the start of the document"
error can still be experienced if you write "Linux-2.6" in place of
"Linux" in the example above. Fix it by tightening the pattern to
^\d+$.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With XSS prevention on (enabled using $prevent_xss), blobs
('blob_plain') of all types except a few known safe ones are served
with "Content-Disposition: attachment". However the check was too
strict; it didn't take into account optional parameter attributes,
media-type = type "/" subtype *( ";" parameter )
as described in RFC 2616
http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.17http://www.w3.org/Protocols/rfc2616/rfc2616-sec3.html#sec3.7
This fixes that, and it for example treats following as safe MIME
media type:
text/plain; charset=utf-8
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way you can examine prerequisites at first glance, before
detailed instructions on installing gitweb. Straightforward
text movement.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The build-time configuration variables JSMIN and CSSMIN were mentioned
only in Makefile; add their description to gitweb/INSTALL.
This required moving description of GITWEB_JS up, near GITWEB_CSS and
just introduced CSMIN and JSMIN.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Almost straightformard moving of "How to configure gitweb for your
local system" section from gitweb/README to gitweb/INSTALL, as it is
about build time configuration. Updated references to it.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is a possibility that your logic could take longer to execute
than the interval time, it is recommended that you recursively call a
named function using window.setTimeout rather than window.setInterval.
Therefore instead of using setInterval as an alternate way of invoking
handleResponse (because some web browsers call onreadystatechange only
once per each distinct state, and not for each server flush), use
setTimeout and reset it from handleResponse. As a bonus this allows
us to get rid of timer if it turns out that web browser calls
onreadystatechange on each server flush.
While at it get rid of `xhr' global variable, creating it instead as
local variable in startBlame and passing it as parameter, and of
`pollTimer' global variable, passing it as member of xhr object
(xhr.pollTimer).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
JavaScript is single-threaded, so there is no need for protecting
against changes to XMLHttpRequest object behind event handler back.
Therefore there is no need for loop that was here in case `xhr' got
new changes while processing current changes. This should make code a
bit more clear.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
JavaScript is single-threaded, so there is no need for protection
against re-entrancy via inProgress variable.
In particular calls to setInterval handler are stacked if handler
doesn't finish before new interrupt (before new interval). The same
happens with events - they are (hopefully) stacked if even handler
didn't finish work.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-js:
gitweb: Make JavaScript ability to adjust timezones configurable
gitweb.js: Add UI for selecting common timezone to display dates
gitweb: JavaScript ability to adjust time based on timezone
gitweb: Unify the way long timestamp is displayed
gitweb: Refactor generating of long dates into format_timestamp_html
gitweb.js: Provide getElementsByClassName method (if it not exists)
gitweb.js: Introduce code to handle cookies from JavaScript
gitweb.js: Extract and improve datetime handling
gitweb.js: Provide default values for padding in padLeftStr and padLeft
gitweb.js: Update and improve comments in JavaScript files
gitweb: Split JavaScript for maintability, combining on build
* jn/ctags-more:
gitweb: Optional grouping of projects by category
gitweb: Modularized git_get_project_description to be more generic
gitweb: Split git_project_list_body in two functions
Beside being obvious reduction of duplicated code, this is enables us
to easily call site-wide config file in per-installation config file.
The actual update to documentation is left for next commit, because of
possible exclusive alternative (possible other next commit) of always
reading system-wide config file and relying on per-instalation config
file overriding system-wide defaults.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Configure JavaScript-based ability to select common timezone for git
dates via %feature mechanism, namely 'javascript-timezone' feature.
The following settings are configurable:
* default timezone (defaults to 'local' i.e. browser timezone);
this also can function as a way to disable this ability,
by setting it to false-ish value (undef or '')
* name of cookie to store user's choice of timezone
* class name to mark dates
NOTE: This is a bit of abuse of %feature system, which can store only
sequence of values, rather than dictionary (hash); usually but not
always only a single value is used.
Based-on-code-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Helped-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will modify HTML, add CSS rules and add DOM event handlers so
that clicking on any date (the common part, not the localtime part)
will display a drop down menu to choose the timezone to change to.
Currently menu displays only the following timezones:
utc
local
-1200
-1100
...
+1100
+1200
+1300
+1400
In timezone selection menu each timezone is +1hr to the previous. The
code is capable of handling fractional timezones, but those have not
been added to the menu.
All changes are saved to a cookie, so page changes and closing /
reopening browser retains the last known timezone setting used.
[jn: Changed from innerHTML to DOM, moved to event delegation for
onclick to trigger menu, added close button and cookie refreshing]
Helped-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch is based on Kevin Cernekee's <cernekee@gmail.com>
patch series entitled "gitweb: introduce localtime feature". While
Kevin's patch changed the server side output so that the timezone
was output from gitweb itself, this has a number of drawbacks, in
particular with respect to gitweb-caching.
This patch takes the same basic goal, display the appropriate times in
a given common timezone, and implements it in JavaScript. This
requires adding / using a new class, "datetime", to be able to find
elements to be adjusted from JavaScript. Appropriate dates are
wrapped in a span with this class.
Timezone to be used can be retrieved from "gitweb_tz" cookie, though
currently there is no way to set / manipulate this cookie from gitweb;
this is left for later commit.
Valid timezones, currently, are: "utc", "local" (which means that
timezone is taken from browser), and "+/-ZZZZ" numeric timezone as in
RFC-2822. Default timezone is "local" (currently not configurable,
left for later commit).
Fallback (should JavaScript not be enabled) is to treat dates as they
have been and display them, only, in UTC.
Pages affected:
* 'summary' view, "last change" field (commit time from latest change)
* 'log' view, author time
* 'commit' and 'commitdiff' views, author/committer time
* 'tag' view, tagger time
Based-on-code-from: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
format_timestamp_html loses its "-localtime => 1" option, and now
always print the local time (in author/comitter/tagger local
timezone), with "atnight" warning if needed.
This means that both 'summary' and 'log' views now display localtime.
In the case of 'log' view this can be thought as an improvement, as
now one can easily see which commits in a series are made "atnight"
and should be examined closer.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is pure refactoring and doesn't change gitweb output, though this
could potentially affect 'summary', 'log', and 'commit'-like views
('commit', 'commitdiff', 'tag').
Remove print_local_time and format_local_time, as their use is now
replaced (indirectly) by using format_timestamp_html.
While at it improve whitespace formatting.
Inspired-by-code-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code is simplified and does not support full specification of
native getElementsByClassName method, but implements just subset that
would be enough for gitweb, supporting only single class name.
Signed-off-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split originally single gitweb.js file into smaller files, each
dealing with single issue / area of responsibility. This move should
make gitweb's JavaScript code easier to maintain.
For better webapp performance it is recommended[1][2][3] to combine
JavaScript files. Do it during build time (in gitweb/Makefile), by
straight concatenation of files into gitweb.js file (which is now
ignored as being generated). This means that there are no changes to
gitweb script itself - it still uses gitweb.js or gitweb.min.js, but
now generated.
[1]: http://developer.yahoo.com/performance/rules.html
"Minimize HTTP Requests" section
[2]: http://code.google.com/speed/articles/include-scripts-properly.html
"1. Combine external JavaScript files"
[3]: http://javascript-reference.info/speed-up-your-javascript-load-time.htm
"Combine Your Files" section.
See also new gitweb/static/js/README file.
Inspired-by-patch-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduced gitweb/static/js/cookies.js file provides functions for
setting, getting and deleting cookies.
Code taken from subsection "Cookies in JavaScript" of "Professional
JavaScript for Web Developers" by Nicholas C. Zakas and from cookie
plugin for jQuery (dual licensed under the MIT and GPL licenses).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move formatDateISOLocal(epoch, timezone) function (and also helper
timezoneOffset(timezoneInfo) function it requires) from common-lib.js to
datetime.js
Add new functions:
* localTimezoneOffset - to get browser timezone offset in seconds
* localTimezoneInfo - to get browser timezone in '(+|-)HHMM' format
* formatTimezoneInfo - turn offset in hours and minutes into '(+|-)HHMM'
* parseRFC2822Date - to parse RFC-2822 dates that gitweb uses into epoch
* formatDateRFC2882 - like formatDateISOLocal, only RFC-2822 format
All those functions are meant to be used in future commit
'gitweb: javascript ability to adjust time based on timezone'
An alternative would be to use e.g. Datejs (http://www.datejs.com)
library, or JavaScript framework that has date formatting (perhaps as
a plugin).
While at it escape '-' in character class inside tzRe regexp, as
recommended by JSLint (http://www.jslint.com).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This means that one can use padLeft(4, 2) and it would be equivalent
to runing padLeft(4, 2, '0'), and it would return '04' i.e. '4' padded
with '0' to width 2, to be used e.g. in formatting date and time.
This should make those functions easier to use. Current code doesn't
yet make use of this feature.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This consists of adding a few extra explanation, fixing descriptions
of functions to match names of parameters in code, adding a few
separators, and fixing spelling -- while at it spell 'neighbor' using
American spelling (and not as 'neighbour').
This is post-split cleanup.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/ctags:
gitweb: Mark matched 'ctag' / contents tag (?by_tag=foo)
gitweb: Change the way "content tags" ('ctags') are handled
gitweb: Restructure projects list generation
Extract filtering out forks (which is done if 'forks' feature is
enabled) into filter_forks_from_projects_list subroutine, and
searching projects (via projects search form, or via content tags)
into search_projects_list subroutine.
Both are now run _before_ displaying projects, and not while printing;
this allow to know upfront if there were any found projects. Gitweb
now can and do print 'No such projects found' if user searches for
phrase which does not correspond to any project (any repository).
This also would allow splitting projects list into pages, if we so
desire.
Filtering out forks and marking repository (project) as having forks
is now consolidated into one subroutine (special case of handling
forks in git_get_projects_list only for $projects_list being file is
now removed). Forks handling is also cleaned up and simplified.
$pr->{'forks'} now contains un-filled list of forks; we can now also
detect situation where the way for having forks is prepared, but there
are no forks yet.
Sorting projects got also refactored in a very straight way (just
moving code) into sort_projects_list subroutine.
The interaction between forks, content tags and searching is now made
more explicit: searching whether by tag, or via search form turns off
fork filtering (gitweb searches also forks, and will show all
results). If 'ctags' feature is disabled, then searching by tag is
too.
The t9500 test now includes some basic test for 'forks' and 'ctags'
features; the t9502 includes test checking if gitweb correctly filters
out forks.
Generating list of projects by scanning given directory is now also a
bit simplified wrt. handling filtering; it is byproduct of extracting
filtering forks to separate subroutine.
While at it we now detect that there are no projects and respond with
"404 No projects found" also for 'project_index' and 'opml' actions.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the $projects_list_group_categories option which, if enabled,
will result in grouping projects by category on the project list page.
The category is specified for each project by the $GIT_DIR/category file
or the 'gitweb.category' variable in its configuration file. By default,
projects are put in the $project_list_default_category category.
Note:
- Categories are always sorted alphabetically, with projects in
each category sorted according to the globally selected $order.
- When displaying a subset of all the projects (page limiting), the
category headers are only displayed for projects present on the page.
The feature is inspired from Sham Chukoury's patch for the XMMS2
gitweb, but has been rewritten for the current gitweb code. The CSS
for categories is inspired from Gustavo Sverzut Barbieri's patch to
group projects by path.
Thanks to Florian Ragwitz for Perl tips.
[jn: Updated to post restructuring projects list generation, fixed bugs,
added very basic test in t9500 that there are no warnings from Perl.]
Signed-off-by: Sebastien Cevey <seb@cine7.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It might have been hard to discover that current view is limited to
projects with given content tag (ctag), as it was distinquished only
in gitweb URL. Mark matched contents tag in the tag cloud using
"match" class, for easier discovery.
This commit introduces a bit of further code duplication in
git_populate_project_tagcloud().
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a git_get_file_or_project_config utility function to
retrieve a repository variable either from a plain text file in the
$GIT_DIR or else from 'gitweb.$variable' in the repository config
(e.g. 'description').
This would be used in next commit to retrieve category for a project,
which is to be stored in the same way as project description.
Signed-off-by: Sebastien Cevey <seb@cine7.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The major change is removing the ability to edit content tags (ctags)
in a web browser.
The interface was created by gitweb, while actual editing of tags was
to be done by external script; the API was not defined, and neither
was provided example implementation. Such split is also a bit fragile
- interface and implementation have to be kept in sync. Gitweb
provided only ability to add tags; you could not edit tags nor delete
them.
Format of ctags is now described in the comment above git_get_project_ctags
subroutine. Gitweb now is more robust with respect to original ctags
format; it also accepts two new formats: $GIT_DIR/ctags file, with one
content tag per line, and multi-value `gitweb.ctag' config variable.
Gathering all ctags of all project is now put in git_gather_all_ctags
subroutine, making git_project_list_body more clear.
git_populate_project_tagcloud subroutine now generates data used for
tag cloud, including generation of ctag link, also in the case
HTML::TagCloud module is unavailable. Links are now generated using
href() subroutine - this is more robust, as ctags might contain '?',
';' and '=' special characters that need to be escaped in query param.
Shown tags are HTML-escaped.
The generation of tag cloud in git_show_project_tagcloud in the case
when HTML::TagCloud is not available is now changed slightly.
The 'content tags' field on project summary page is made more in line
with other fields in "projects_list" table. Because one cannot now
add new tags from web interface, this field is no longer displayed
when there are no content tags for given project.
Ctags-issue-Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Ctags-issue-Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the printing of project rows (body/contents of projects list
table) on the 'project_list' page into a separate git_project_list_rows
function. This makes it easier to reuse the code to print different
subsets of the whole project list.
[jn: Updated to post restructuring projects list generation]
Signed-off-by: Sebastien Cevey <seb@cine7.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For projects that do not release official archives, gitweb's snapshot
feature would be an excellent alternative, and but without the '-n'
('--no-name') argument, gzip includes a timestamp in output which results
in different files. Because some systems hash/checksum downloaded files
to ensure integrity of the tarball (e.g FreeBSD), it is desirable to
produce tarballs in a reproducible way for that purpose.
Whilst '--no-name' is more descriptive, the long version of the flag is
not supported on all systems. In particular, OpenBSD does not appear to
support it.
Supply '-n' to gzip to exclude timestamp from output and produce idential
output every time.
Signed-off-by: Fraser Tweedale <frase@frase.id.au>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I found that some doubled words had snuck back into projects from which
I'd already removed them, so now there's a "syntax-check" makefile rule in
gnulib to help prevent recurrence.
Running the command below spotted a few in git, too:
git ls-files | xargs perl -0777 -n \
-e 'while (/\b(then?|[iao]n|i[fst]|but|f?or|at|and|[dt])\s+\1\b/gims)' \
-e '{$n=($` =~ tr/\n/\n/ + 1); ($v=$&)=~s/\n/\\n/g;' \
-e 'print "$ARGV:$n:$v\n"}'
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract converting numerical timezone in the form of '(+|-)HHMM' to
timezoneOffset function, and fix parsing of negative fractional
timezones.
This is used to format timestamps in 'blame_incremental' view; this
complements commit 2b1e172 (gitweb: Fix handling of fractional
timezones in parse_date, 2011-03-25).
Now
gitweb.cgi/git.git/blame_incremental/3fe5489:/contrib/gitview/gitview#l853
and
gitweb.cgi/git.git/blame/3fe5489:/contrib/gitview/gitview#l853
show the same correct time in author's local timezone in title
(on mouseover) [Aneesh Kumar K.V, 2006-02-24 00:59:42 +0530].
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fractional timezones, like -0330 (NST used in Canada) or +0430
(Afghanistan, Iran DST), were not handled properly in parse_date; this
means values such as 'minute_local' and 'iso-tz' were not generated
correctly.
This was caused by two mistakes:
* sign of timezone was applied only to hour part of offset, and not
as it should be also to minutes part (this affected only negative
fractional timezones).
* 'int $h + $m/60' is 'int($h + $m/60)' and not 'int($h) + $m/60',
so fractional part was discarded altogether ($h is hours, $m is
minutes, which is always less than 60).
Note that positive fractional timezones +0430, +0530 and +1030 can be
found as authortime in git.git repository itself.
For example http://repo.or.cz/w/git.git/commit/88d50e7 had authortime
of "Fri, 8 Jan 2010 18:48:07 +0000 (23:48 +0530)", which is not marked
with 'atnight', when "git show 88d50e7" gives correct author date of
"Sat Jan 9 00:18:07 2010 +0530".
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Timezone is required to correctly set local time, which would be needed
for future 'localtime' feature.
While at it, remove unnecessary call to the function from git_log_body,
as its return value is not used anywhere.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When $feature{'pathinfo'} is used, gitweb script sets the base URL to
itself, so that relative links to static files work correctly. It
does it by adding something like below to HTML head:
<base href="http://HOST/gitweb.cgi">
This breaks the "patch" anchor links seen on the commitdiff pages,
because these links, being relative (<a href="#patch1">), are resolved
(computed) relative to the base URL and not relative to current URL,
i.e. as:
http://HOST/gitweb.cgi#patch1
Instead, they should look like this:
35a9811ef9 (patch1)
Add an "-anchor" parameter to href(), and use href(-anchor=>"patch1")
to generate "patch" anchor links, so that the full path is included in
the patch link.
While at it, convert
print "foo";
print "bar";
to
print "foo" .
"bar";
in the neighborhood of changes.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consider the following code fragment:
/*
* test
*/
vim ":set list" mode shows that the first character on each line is a
tab:
^I/*$
^I * test$
^I */$
By default, the "highlight" program will retain the tabs in the HTML
output:
$ highlight --fragment --syntax c test.c
<span class="hl com">/*</span>
<span class="hl com"> * test</span>
<span class="hl com"> */</span>
vim list mode:
^I<span class="hl com">/*</span>$
<span class="hl com">^I * test</span>$
<span class="hl com">^I */</span>$
In gitweb, this winds up looking something like:
1 /*
2 * test
3 */
I tried both Firefox and Opera and saw the same behavior.
The desired output is:
1 /*
2 * test
3 */
This can be accomplished by specifying "--replace-tabs=8" on the
highlight command line.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Acked-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change S_ISREG($to_mode_oct) to S_ISREG($from_mode_oct) in the branch
that handles from modes, not to modes. This logic appears to have been
caused by copy/paste programming by Jakub Narebski in e8e41a93. It
would be better to rewrite this code not to be duplicated, but I
haven't done so.
This issue caused a failing test on perl 5.13.9, which has a warning
that turned this up:
gitweb.perl: Use of uninitialized value in subroutine entry at /home/avar/g/git/t/../gitweb/gitweb.perl line 4415.
Which caused the Git test suite to fail on this test:
./t9500-gitweb-standalone-no-errors.sh (Wstat: 256 Tests: 90 Failed: 84)
Failed tests: 1-8, 10-36, 38-45, 47-48, 50-88
Non-zero exit status: 1
Reported-by: perl 5.13.9
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the qw(...) construct as implicit parentheses was deprecated in
perl 5.13.5. Change the relevant code in gitweb to not use the
deprecated construct. The offending code was introduced in 3562198b by
Jakub Narebski.
The issue is that perl will now warn about this:
$ perl -wE 'for my $i qw(a b) { say $i }'
Use of qw(...) as parentheses is deprecated at -e line 1.
a
b
This caused gitweb.perl to warn on perl 5.13.5 and above, and these
tests to fail on those perl versions:
./t9501-gitweb-standalone-http-status.sh (Wstat: 256 Tests: 11 Failed: 10)
Failed tests: 2-11
Non-zero exit status: 1
./t9502-gitweb-standalone-parse-output.sh (Wstat: 256 Tests: 10 Failed: 9)
Failed tests: 2-10
Non-zero exit status: 1
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some optional additional Perl modules are required for some of extra
features. Mention those in gitweb/INSTALL.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--xhtml" option is supported only in highlight < 3.0. There is no option
to enforce (X)HTML output format compatible with both highlight < 3.0 and
highlight >= 3.0. However default output format is HTML so we don't need to
explicitly specify it.
Signed-off-by: Adam Tkac <atkac@redhat.com>
Helped-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It happens that closing file descriptor fails whereas the blob is
perfectly readable. According to perlman the reasons could be:
If the file handle came from a piped open, "close" will additionally
return false if one of the other system calls involved fails, or if the
program exits with non-zero status. (If the only problem was that the
program exited non-zero, $! will be set to 0.) Closing a pipe also waits
for the process executing on the pipe to complete, in case you want to
look at the output of the pipe afterwards, and implicitly puts the exit
status value of that command into $?.
Prematurely closing the read end of a pipe (i.e. before the process writ-
ing to it at the other end has closed it) will result in a SIGPIPE being
delivered to the writer. If the other end can't handle that, be sure to
read all the data before closing the pipe.
In this case we don't mind that close fails.
Signed-off-by: Sylvain Rabot <sylvain@abstraction.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some sites may not want to have a logo at all.
While at it, use $cgi->img to simplify this code. (CGI.pm learned
most HTML4 tags by version 2.79, so this should be portable to perl
5.8, though I haven't tested.)
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With v1.5.0-rc0~169 (gitweb: Fix Atom feed <logo>: it is $logo,
not $logo_url, 2006-12-04), the logo URI to be written to Atom
feeds was corrected but the case of no logo forgotten.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitweb: Include links to feeds in HTML header only for '200 OK' response
fsck docs: remove outdated and useless diagnostic
userdiff: fix typo in ruby and python word regexes
trace.c: mark file-local function static
Fix typo in git-gc document.
To do that, generating "<link />"s to feeds were refactored into
print_feed_meta() subroutine, to keep nesting (indent) level in
git_header_html() low. This has also the advantage of making code
more clear.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is needed only to escape attributes of handcrafted HTML elements,
and not those generated using CGI.pm subroutines / methods for HTML
generation.
While at it, add esc_url and esc_html where needed, and prefer to use
CGI.pm HTML generating methods than handcrafted HTML code. Most of
those are probably unnecessary (could be exploited only by person with
write access to gitweb config, or at least access to the repository).
This fixes CVE-2010-3906
Reported-by: Emanuele Gentili <e.gentili@tigersecurity.it>
Helped-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating path_info part of link, don't encode space as '+', because
while $cgi->param('foo') translates '+' in query param to ' ', neither
$ENV{'PATH_INFO'} nor $cgi->path_info() do.
This fixes the issue with pathnames with embedded whitespace and
$feature{'pathinfo'} / path_info links. It is done by using newly
introduced esc_path_info() instead of esc_url() in href() subroutine.
Also while links are more clear not escaping space (' ') characters in
generated links, the trailing space must be URI-encoded, otherwise would
get discarded.
Issue noticed thanks to John 'Warthog9' Hawley.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gb/gitweb-remote-heads:
git instaweb: enable remote_heads
gitweb: group remote heads by remote
gitweb: provide a routine to display (sub)sections
gitweb: refactor repository URL printing
gitweb: remotes view for a single remote
gitweb: allow action specialization in page header
gitweb: nagivation menu for tags, heads and remotes
gitweb: separate heads and remotes lists
gitweb: git_get_heads_list accepts an optional list of refs
gitweb: introduce remote_heads feature
gitweb: use fullname as hash_base in heads link
Global variables $my_url, $my_uri and $base_url have subtle interactions
that need to be desribed, and can be influenced most cleanly by
$per_request_config.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow selecting whether configuration file should be (re)parsed on each
request (the default, for backward compatibility with configurations that
change per session, see commit 7f425db (gitweb: allow configurations that
change with each request, 2010-07-30)), or whether should it be parsed only
once (for performance speedup for persistent environments, though currently
only FastCGI is able to make use of it, when flexibility is not important).
You can also have configuration file parsed only once, but have parts of
configuration (re)evaluated once per each request.
This is done by introducing $per_request_config variable: if set to code
reference, this code would be run once per request, while config file would
be parsed only once. For example gitolite's contrib/gitweb/gitweb.conf
fragment mentioned in 7f425db could be rewritten as
our $per_request_config = sub {
$ENV{GL_USER} = ($cgi && $cgi->remote_user) || "gitweb";
};
to make use of this feature.
If $per_request_config is not a code reference, it is taken to be boolean
variable, to choose between running config file for each request
(flexibility), and running config file only once (performance in
persistent environments).
The default value for $per_request_config is 1 (true), which means that
old configuration that require to change per session (like gitolite's)
will keep working.
While at it, make it so evaluate_git_version() is run only once.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-test:
gitweb/Makefile: Include gitweb/config.mak
gitweb/Makefile: Add 'test' and 'test-installed' targets
t/gitweb-lib.sh: Add support for GITWEB_TEST_INSTALLED
gitweb: Move call to evaluate_git_version after evaluate_gitweb_config
In remote and summary view, display a block for each remote, with the
fetch and push URL(s) as well as the list of the remote heads.
In summary view, if the number of remotes is higher than a prescribed
limit, only display the first <limit> remotes and their fetch and push
urls, without any heads information and without grouping.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The routine puts the given contento into a DIV element, automatically
adding a header div. The content can be provided as a standard scalar
value (which is used as-is), as a scalar ref (which is HTML-escaped), as
a function reference to be executed, or as a file handle to be dumped.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the code to display the repository URL(s) from summary view
into a format_rep_url() routine.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'remotes' view is passed the 'hash' parameter, interpret it as the
name of a remote and limit the view the the heads of that remote.
In single-remote view we let the user switch easily to the default
remotes view by specifying an -action_extra for the page header and by
enabling the 'remotes' link in the reference navigation submenu.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An optional -action_extra parameter is given to git_header_html() to
identify a variant of the action that is being displayed. For example,
this can be used to specify that the remotes view is being used for a
specific remote and not to display all remotes.
When -action_extra is provided, the action name in the header will be
turned into a link to the action without any arguments or parameters, to
provide a quick link to the non-specific variant of the action.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tags, heads and remotes are all views that inspect a (particular class
of) refs, so allow the user to easily switch between them by adding
the appropriate navigation submenu to each view.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We specialize the 'heads' action to only display local branches, and
introduce a 'remotes' action to display the remote branches (only
available when the remotes_head feature is enabled).
Mirroring this, we also split the heads list in summary view into
local and remote lists, each linking to the appropriate action.
The git_get_heads_list now defaults to 'heads' only, regardless of
whether the remote heads feature is active or not.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_get_heads_list(limit, class1, class2, ...) can now be used to retrieve
refs/class1, refs/class2 etc. Defaults to ('heads', 'remotes') or ('heads')
depending on whether the 'remote_heads' feature is enabled or not.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this feature enabled, remote heads are retrieved (and displayed)
when getting (and displaying) the heads list. Typical usage would be for
local repository browsing, e.g. by using git-instaweb (or even a more
permanent gitweb setup), to check the repository status and the relation
between tracking branches and the originating remotes.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, if names are manipulated for display, the link will point to
the wrong head.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We say 'use 5.008' at the beginning of the script, therefore there is no
need to check if Time::HiRes module is available. We can also import
gettimeofday and tv_interval.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eli Barzilay noticed that
http://server/gitweb/project/<commit-sha1>
link goes to 'shortlog' view, while 'commit' view would be more
useful, but that 'shortlog' action is more apropriate for
http://server/gitweb/project/<commit-sha1>..<other-commit-sha1>
links.
Therefore for the case when we don't have either action, or filename,
or parent hash [base] in path_info-based URL, i.e. for
http://server/gitweb/project/<object-id>
link, instead of using 'shortlog' view we allow dispatch() subroutine
to detect type of object and use appropriate action (in most case it
would be either 'commit' action, or 'tag', or 'tree' for top
directory).
Requested-by: Eli Barzilay <eli@barzilay.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Tested-by: Eli Barzilay <eli@barzilay.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was bug in parsing "project/:/file" and "project/:/" path_info
URLs, with implicit HEAD as 'hash_base'.
For such URLs the refname is empty, and before this fix regexp for
parsing path_info fragment assumed that it is always non-empty.
Refname cannot contain ':', as per 'git check-ref-format'.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow for gitweb-specific Makefile config to reside in config.mak file
in the 'gitweb/' subdirectory. This means that gitweb-specific
build-time configuration variable can reside in gitweb-specific
gitweb/config.mak
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'test-installed' target in gitweb/Makefile tests installed gitweb,
using the same destination directory that 'install' target uses.
The 'test' target is just a convenience wrapper invoking 'gitweb-test'
target of t/Makefile.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now evaluate_git_version() is inside run_request() to be called for each
request, instead of once per starting gitweb; this currently matters only
when using FastCGI interface (gitweb.fcgi).
This change was done because evaluate_git_version() uses $GIT variable,
which can be set / modified by gitweb config file, but the variable is
modified this way by gitweb config file used in gitweb tests. Without
this change there is spurious extra output from t9500 test when tests are
run with '--debug' option.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Formalize our dependency on perl 5.8, bumped from 5.6.[12]. We already
used the three-arg form of open() which was introduced in 5.6.1, but
t/t9700/test.pl explicitly depended on 5.6.2.
However git-add--interactive.pl has been failing on the 5.6 line since
it was introduced in v1.5.0-rc0~12^2~2 back in 2006 due to this open
syntax:
sub run_cmd_pipe {
my $fh = undef;
open($fh, '-|', @_) or die;
return <$fh>;
}
Which when executed dies on "Can't use an undefined value as
filehandle reference". Several of our tests also fail on 5.6 (even
more when compiled with NO_PERL_MAKEMAKER=1):
t2016-checkout-patch.sh
t3904-stash-patch.sh
t3701-add-interactive.sh
t7105-reset-patch.sh
t7501-commit.sh
t9700-perl-git.sh
Our code is bitrotting on 5.6 with no-one interested in fixing it, and
pinning us to such an ancient release of Perl is keeping us from using
useful features introduced in the 5.8 release.
The 5.6 series is now over 10 years old, and the 5.6.2 maintenance
release almost 7. 5.8 on the other hand is more than 8 years old.
All the modern Unix-like operating systems have now upgraded to it or
a later version, and 5.8 packages are available for old IRIX, AIX
Solaris and Tru64 systems.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Tor Arntsen <tor@spacetec.no>
Acked-by: Randal L. Schwartz <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow build-time/run-time configuration of the highlight executable
(must be the one from http://www.andre-simon.de due to assumptions
about parameters and output). Defaults to previous behavior which
assumes that highlight is available on the server PATH. However, if
this is not the case, the path to the highlight executable can be
configured at build time as a configuration variable
HIGHLIGHT_BIN = /path/to/highlight
or at runtime by configuring GITWEB_CONFIG
$highlight_bin = /path/to/highlight
Signed-off-by: Christopher Wilson <cwilson@cdwilson.us>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes an XML error when visiting a nonexistent tag
(i.e. "../gitweb.cgi?p=git.git;a=tag;h=refs/tags/BADNAME").
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitweb: clarify search results page when no matching commit found
Documentation: add a FILES section for show-ref
Makefile: add missing dependency on http.h
Makefile: add missing dependencies on url.h
Documentation/git-log: Clarify --full-diff
git-rebase: fix typo when parsing --force-rebase
imap-send: Fix sprintf usage
prune: allow --dry-run for -n and --verbose for -v
notes: allow --dry-run for -n and --verbose for -v
Document -B<n>[/<m>], -M<n> and -C<n> variants of -B, -M and -C
Documentation: cite git-am from git-apply
t7003: fix subdirectory-filter test
Allow "check-ref-format --branch" from subdirectory
check-ref-format: handle subcommands in separate functions
pretty-options.txt: match --format's documentation with implementation.
When searching commits for a string that never occurs, the results
page looks something like this:
projects / foo.git / search \o/
summary | ... | tree [commit] search: [ kfjdkas ] [ ]re
first ⋅ prev ⋅ next
Merge branch 'maint'
Foo: a demonstration project
Without a list of hits to compare it to, the header describing the
commit named by the hash parameter (usually HEAD) may itself look
like a hit. Add some text (“No match.”) to replace the empty
list of hits and avoid this confusion.
While at it, remove some nearby dead code, left behind from a
simplification a few years ago (v1.5.4-rc0~276^2~4, 2007-11-01).
Noticed-by: Erick Mattos <erick.mattos@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Run $post_dispatch_hook->() not $pre_dispatch_hook->() after each
request.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitolite's contrib/gitweb/gitweb.conf includes:
$ENV{GL_USER} = $cgi->remote_user || "gitweb";
which is useful for setups where a user has to be authenticated
to access certain repos. Perhaps other typical configurations
change per session in other ways, too.
v1.7.2-rc2~6 (gitweb: Move evaluate_gitweb_config out of run_request,
2010-07-05) broke such configurations for a speedup, by loading
the configuration once per FastCGI process.
Probably in the end there should be a way to specify in the
configuration whether a particular installation wants the speedup or
the flexibility. But for now it is easier to just undo the relevant
change.
This partially reverts commit 869d58813b.
Reported-by: Julio Lajara <julio.lajara@alum.rpi.edu>
Analysis-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move highlight config out of guess_file_syntax() so that it can be
extended/overridden by system/user configuration.
Signed-off-by: Alejandro R. Sedeño <asedeno@mit.edu>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, 452e225 (gitweb: fix esc_param, 2009-10-13) fixed CGI escaping
rules used in esc_url. A very similar logic exists in esc_param and needs
to be fixed the same way.
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move evaluate_gitweb_config() and evaluate_git_version() out of
run_request() to run(), making them not run one for each request.
This changes how git behaves in FastCGI case.
This change makes it impossible to have config which changes with
request, but I don't think anyone relied on such (hidden action)
behavior.
While at it, reset timer and number of git commands at beginning of
run_request() in new reset_timer() subroutine. This fixes case when
gitweb was run using FastCGI interface: time is reported for request,
and not for single run of gitweb script. This changes slightly
behavior in non-FastCGI case: the number of git commands reported is
1 less (running `git --version` one per gitweb is not counted now).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-fastcgi:
gitweb: Run in FastCGI mode if gitweb script has .fcgi extension
gitweb: Add support for FastCGI, using CGI::Fast
gitweb: Put all per-connection code in run() subroutine
This typo has been in place since the rule was originally added by
0e6ce21 (Gitweb: add support for minifying gitweb.css).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-plackup:
git-instaweb: Add support for running gitweb via 'plackup'
git-instaweb: Wait for server to start before running web browser
git-instaweb: Remove pidfile after stopping web server
git-instaweb: Configure it to work with new gitweb structure
git-instaweb: Put httpd logs in a "$httpd_only" subdirectory
gitweb: Set default destination directory for installing gitweb in Makefile
gitweb: Move static files into seperate subdirectory
Check if there is a caller in top frame of gitweb, and either 'return'
if gitweb code is wrapped in subroutine, or 'exit' if it is not.
This should avoid
gitweb.cgi: Subroutine git_SOMETHING redefined at gitweb.cgi line NNN
warnings in error_log when running gitweb with mod_perl (using
ModPerl::Registry handler)
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name of the key has to be the same in call site handle_errors_html
and in called subroutine that uses it, i.e. git_header_html.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the name of the script ($SCRIPT_NAME or $SCRIPT_FILENAME CGI
environment variable, or __FILE__ literal) ends with '.fcgi'
extension, run gitweb in FastCGI mode, as if it was run with
'--fastcgi' / '--fcgi' option.
This is intended for easy deploying gitweb using FastCGI
interface.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new subdirectory called 'static' in gitweb/, and move
all static files required by gitweb.cgi when running, which means
styles, images and Javascript code. This should make gitweb more
readable and easier to maintain.
Update t/gitweb-lib.sh to reflect this change.The install-gitweb
now also include moving of static files into 'static' subdirectory
in target directory: update Makefile, gitweb's INSTALL, README and
Makefile accordingly.
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Petr Baudis <pasky@ucw.cz>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-caching-prep:
gitweb: Move generating page title to separate subroutine
gitweb: Add custom error handler using die_error
gitweb: Use nonlocal jump instead of 'exit' in die_error
gitweb: href(..., -path_info => 0|1)
Export more test-related variables when running external tests
Make git-format-patch (used by 'patch' and 'patches' views) use the
same rename detection options that git-diff and git-diff-tree (used
by 'commitdiff', 'blobdiff', etc.) use.
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Former run() subroutine got renamed to run_request(). The new run()
subroutine can run multiple requests at once if run as FastCGI script.
To run gitweb as FastCGI script you must specify '--fastcgi' / '-f'
command line option to gitweb, otherwise it runs as an ordinary CGI
script.
[jn: cherry picked from 56d7d436644ab296155a697552ea1345f2701620
in http://utsl.gen.nz/gitweb/?p=gitweb which was originally based
on v264 (2326acfa95) by Kay Sievers;
updated to reflect current gitweb code]
TODO: update 'gitweb/README' and/or 'gitweb/INSTALL' files.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All code that is run per-connection (as opposed to those parts of gitweb
code that can be run once) is put into appropriate subroutines:
- evaluate_uri
- evaluate_gitweb_config
- evaluate_git_version (here only because $GIT can be set in config)
- check_loadavg (as soon as possible; $git_version must be defined)
- evaluate_query_params (counterpart to evaluate_path_info)
- evaluate_and_validate_params
- evaluate_git_dir (requires $project)
- configure_gitweb_features (@snapshot_fmts, $git_avatar)
- dispatch (includes setting default $action)
The difference is best viewed with '-w', '--ignore-all-space' option,
because of reindent caused by putting code in subroutines.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactoring (adding guess_file_syntax and run_highlighter
subroutines) is meant to make it easier in the future to add support
for other syntax highlighing solutions, or make it smarter by not
re-running `git cat-file` second time.
Instead of looping over list of regexps (keys of %highlight_type hash),
make use of the fact that choosing syntax is based either on full
basename (%highlight_basename), or on file extension (%highlight_ext).
Add some basic test of syntax highlighting (with 'highlight' as
prerequisite) to t/t9500-gitweb-standalone-no-errors.sh test.
While at it make git_blob Perl style prettier.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It requires the 'highlight' program to do all the heavy-lifting.
This is loosely based on Daniel Svensson's and Sham Chukoury's work in
gitweb-xmms2.git (it cannot be cherry-picked, as gitweb-xmms2 first forked
wildly, then not contributed back, and then went stale).
[jn: cherry picked from bc1ed6aafd9ee4937559535c66c8bddf1864bec6
in http://repo.or.cz/w/git/dscho.git, with a few changes]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Installing gitweb is now as easy as
# make gitwebdir=/var/www/cgi-bin gitweb-install ;# as root
The gitweb/INSTALL file was updated accordingly, to make use of this
new target.
Fix shell quoting, i.e. setting bindir_SQ etc., in gitweb/Makefile.
Those variables were not used previously.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When $projects_list points to a directory, and git_get_projects_list
scans this directory for repositories, there can be generated the
following warnings (for persistent services like mod_perl or plackup):
Variable "$project_maxdepth" may be unavailable at gitweb.cgi line 2443.
Variable "$projectroot" may be unavailable at gitweb.cgi line 2451.
Those are false positives; silence those warnings by explicitely
declaring $project_maxdepth and $projectroot with 'our', as global
variables, in anonymous subrotine passed to File::Find::find.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_page_title subroutine is currently used only in git_header_html.
Nevertheless refactoring title generation allowed to reduce indent
level.
It would be used in more than one callsite in the patch adding caching
activity indicator to gitweb.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the default message for errors (for fatalsToBrowser) to use
die_error() subroutine. This way errors (and explicitely calling 'die
MESSAGE') would generate 'Internal Server Error' error message.
Note that call to set_message is intentionally not put in BEGIN block;
we set error handler to use die_error() only after we are sure that we
can use it, after all needed variables are set.
Due to the fact that error handler set via set_message() subroutine
from CGI::Carp (in the fatalsToBrowser case) is called after HTTP
headers were already printed (with exception of MOD_PERL), gitweb
cannot return 'Status: 500 Internal Server Error'.
Thanks to the fact that die_error() no longer uses 'exit', errors
would be logged by CGI::Carp, independent on whether default error
handler is used, or handle_errors_html which uses die_error is used.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Jakub Narebski
Drew Northup
Peter Stuge
张忠山
Ludwig Nussel
Jonathan Nieder
John 'Warthog9' Hawley
Sebastien Cevey
Fraser Tweedale
Jim Meyering
Kevin Cernekee
Ævar Arnfjörð Bjarmason
Adam Tkac
Sylvain Rabot
Giuseppe Bilotta
Christopher Wilson
Anders Kaseorg
Ralf Wildenhues
Alejandro R. Sedeño
Pavan Kumar Sunkara
Jay Soffian
Sam Vilain
Johannes Schindelin