Mark those remaining tests that pass when run under SANITIZE=leak with
TEST_PASSES_SANITIZE_LEAK=true, these were either omitted in
f346fcb62a (Merge branch 'ab/mark-leak-free-tests-even-more',
2021-12-15) and 5a4f8381b6 (Merge branch 'ab/mark-leak-free-tests',
2021-10-25), or have had their memory leaks fixed since then.
With this change there's now a a one-to-one mapping between those
tests that we have opted-in via "TEST_PASSES_SANITIZE_LEAK=true", and
those that pass with the new "check" mode:
GIT_TEST_PASSING_SANITIZE_LEAK=check \
GIT_TEST_SANITIZE_LEAK_LOG=true \
make test SANITIZE=leak
Note that the "GIT_TEST_SANITIZE_LEAK_LOG=true" is needed due to the
edge cases noted in a preceding commit, i.e. in some cases we'd pass
the test itself, but still have outstanding leaks due to ignored exit
codes.
The "GIT_TEST_SANITIZE_LEAK_LOG=true" corrects for that, we're only
marking those tests as passing that really don't have any leaks,
whether that was reflected in their exit code or not.
Note that the change here to "t9100-git-svn-basic.sh" is marking that
test as passing under SANITIZE=leak, we're removing a
"TEST_FAILS_SANITIZE_LEAK=true" line, not
"TEST_PASSES_SANITIZE_LEAK=true". See 7a98d9ab00 (revisions API: have
release_revisions() release "cmdline", 2022-04-13) for the
introduction of that t/lib-git-svn.sh-specific variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the the release_revisions() function so that it frees the
"cmdline" in the "struct rev_info". This in combination with a
preceding change to free "commits" and "mailmap" means that we can
whitelist another test under "TEST_PASSES_SANITIZE_LEAK=true".
There was a proposal in [1] to do away with xstrdup()-ing this
add_rev_cmdline(), perhaps that would be worthwhile, but for now let's
just free() it.
We could also make that a "char *" in "struct rev_cmdline_entry"
itself, but since we own it let's expose it as a constant to outside
callers. I proposed that in [2] but have since changed my mind. See
14d30cdfc0 (ref-filter: fix memory leak in `free_array_item()`,
2019-07-10), c514c62a4f (checkout: fix leak of non-existent branch
names, 2020-08-14) and other log history hits for "free((char *)" for
prior art.
This includes the tests we had false-positive passes on before my
6798b08e84 (perl Git.pm: don't ignore signalled failure in
_cmd_close(), 2022-02-01), now they pass for real.
Since there are 66 tests matching t/t[0-9]*git-svn*.sh it's easier to
list those that don't pass than to touch most of those 66. So let's
introduce a "TEST_FAILS_SANITIZE_LEAK=true", which if set in the tests
won't cause lib-git-svn.sh to set "TEST_PASSES_SANITIZE_LEAK=true.
This change also marks all the tests that we removed
"TEST_FAILS_SANITIZE_LEAK=true" from in an earlier commit due to
removing the UNLEAK() from cmd_format_patch(), we can now assert that
its API use doesn't leak any "struct rev_info" memory.
This change also made commit "t5503-tagfollow.sh" pass on current
master, but that would regress when combined with
ps/fetch-atomic-fixup's de004e848a (t5503: simplify setup of test
which exercises failure of backfill, 2022-03-03) (through no fault of
that topic, that change started using "git clone" in the test, which
has an outstanding leak). Let's leave that test out for now to avoid
in-flight semantic conflicts.
1. https://lore.kernel.org/git/YUj%2FgFRh6pwrZalY@carlos-mbp.lan/
2. https://lore.kernel.org/git/87o88obkb1.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix typos in documentation, code comments, and RelNotes which repeat
various words. In trivial cases, just delete the duplicated word and
rewrap text, if needed. Reword the affected sentence in
Documentation/RelNotes/1.8.4.txt for it to make sense.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some test-cases, UTF-8 locale is required. To find such locale,
we're using the first available UTF-8 locale that returned by
"locale -a".
However, the locale(1) utility is unavailable on some systems,
e.g. Linux with musl libc.
However, without "locale -a", we can't guess provided UTF-8 locale.
Add a Makefile knob GIT_TEST_UTF8_LOCALE and activate it for
linux-musl in our CI system.
Rename t/lib-git-svn.sh:prepare_a_utf8_locale to prepare_utf8_locale,
since we no longer prepare the variable named "a_utf8_locale",
but set up a fallback value for GIT_TEST_UTF8_LOCALE instead.
The fallback will be LC_ALL, LANG environment variable,
or the first UTF-8 locale from output of "locale -a", in that order.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t9[0-4]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the test scripts, the recommended style is, e.g.:
test_expect_success 'name' '
do-something somehow &&
do-some-more testing
'
When using this style, any single quote in the multi-line test section
is actually closing the lone single quotes that surround it.
It can be a non-issue in practice:
test_expect_success 'sed a little' '
sed -e 's/hi/lo/' in >out # "ok": no whitespace in s/hi/lo/
'
Or it can be a bug in the test, e.g., because variable interpolation
happens before the test even begins executing:
v=abc
test_expect_success 'variable interpolation' '
v=def &&
echo '"$v"' # abc
'
Change several such in-test single quotes to use double quotes instead
or, in a few cases, drop them altogether. These were identified using
some crude grepping. We're not fixing any test bugs here, but we're
hopefully making these tests slightly easier to grok and to maintain.
There are legitimate use cases for closing a quote and opening a new
one, e.g., both '\'' and '"'"' can be used to produce a literal single
quote. I'm not touching any of those here.
In t9401, tuck the redirecting ">" to the filename while we're touching
those lines.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test framework has been updated so that most tests will run
with predictable (artificial) timestamps.
* jk/tests-timestamp-fix:
t9100: stop depending on commit timestamps
test-lib: set deterministic default author/committer date
t9100: explicitly unset GIT_COMMITTER_DATE
t5539: make timestamp requirements more explicit
t9700: loosen ident timezone regex
t6000: use test_tick consistently
An earlier "fix" to this script gave up updating it not to rely on
the current time because we cannot control what timestamp subversion
gives its commits. We however could solve the issue in a different
way and still use deterministic timestamps on Git commits.
One fix would be to sort the list of trees before removing duplicates,
but that loses information:
- we do care that the fetched history is in the same order
- there's a tree which appears twice in the history, and we'd want to
make sure that it's there both times
So instead, let's de-duplicate using a hash (preserving the order), and
drop only lines with identical trees and subjects (preserving the tree
which appears twice, since it has different subjects each time).
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The early part of t9100 creates an unusual "doubled" history in the
"git-svn" ref. When we get to t9100.17, it looks like this:
$ git log --oneline --graph git-svn
[...]
* efd0303 detect node change from file to directory #2
|\
* | 3e727c0 detect node change from file to directory #2
|/
* 3b00468 try a deep --rmdir with a commit
|\
* | b4832d8 try a deep --rmdir with a commit
|/
* f0d7bd5 import for git svn
Each commit we make with "git commit" is paired with one from "git svn
set-tree", with the latter as a merge of the first and its grandparent.
Later, t9100.17 wants to check that "git svn fetch" gets the same trees.
And it does, but just one copy of each. So it uses rev-list to get the
tree of each commit and pipes it to "uniq" to drop the duplicates. Our
input isn't sorted, but it will find adjacent duplicates. This works
reliably because the order of commits from rev-list always shows the
duplicates next to each other. For any one of those merges, we could
choose to show its duplicate or the grandparent first. But barring
clocks running backwards, the duplicate will always have a time equal to
or greater than the grandparent. Even if equal, we break ties by showing
the first-parent first, so the duplicates remain adjacent.
But this would break if the timestamps stopped moving in chronological
order. Normally we would rely on test_tick for this, but we have _two_
sources of time here:
- "git commit" creates one commit based on GIT_COMMITTER_DATE (which
respects test_tick)
- the "svn set-tree" one is based on subversion, which does not have
an easy way to specify a timestamp
So using test_tick actually breaks the test, because now the duplicates
are far in the past, and we'll show the grandparent before the
duplicate. And likewise, a proposed change to set GIT_COMMITTER_DATE in
all scripts will break it.
We _could_ fix this by sorting before removing duplicates, but
presumably it's a useful part of the test to make sure the trees appear
in the same order in both spots. Likewise, we could use something like:
perl -ne 'print unless $seen{$_}++'
to remove duplicates without impacting the order. But that doesn't work
either, because there are actually multiple (non-duplicate) commits with
the same trees (we change a file mode and then change it back). So we'd
actually have to de-duplicate the combination of subject and tree. Which
then further throws off t9100.18, which compares the tree hashes
exactly; we'd have to strip the result back down.
Since this test _isn't_ buggy, the simplest thing is to just work around
the proposed change by documenting our expectation that git-created
commits are correctly interleaved using the current time.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Compute the relevant tree objects for SHA-256 and use those when
appropriate instead of using the SHA-1 ones.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Acked-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix various places where the ordering was obviously wrong, meaning it
was easy to find with grep.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests want to run a command outside of any git repo;
with the nongit() function this is now a one-liner. It saves
a few lines, but more importantly, it's immediately obvious
what the code is trying to accomplish.
This doesn't convert every such case in the test suite; it
just covers those that want to do a one-off command. Other
cases, such as the ones in t4035, are part of a larger
scheme of outside-repo files, and it's less confusing for
them to stay consistent with the surrounding tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests for "git svn" have been taught to reuse the lib-httpd test
infrastructure when testing the subversion integration that
interacts with subversion repositories served over the http://
protocol.
* ew/git-svn-http-tests:
git svn: migrate tests to use lib-httpd
t/t91*: do not say how to avoid the tests
Some of the tests "say" how to stop the svn tests from running, some do
not.
The test suite is directed at people reading t/README where we keep all
information about running the test suite (partly, with options etc.).
Remove said "say" occurences.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checking the version of the installed SVN libraries should not
require a git repository at all. This matches the behavior of
"git --version".
Add a test for "git svn help" for the same behavior while we're
at it, too.
Signed-off-by: Eric Wong <e@80x24.org>
A few tests here use double-quotes around the snippets of
shell code to run the tests. None of these tests wants to do
any interpolation at all, and it just leads to an extra
layer of quoting around all double-quotes and dollar signs
inside the snippet. Let's switch to single quotes, like
most other test scripts.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These variables were added in 16805d3 (t/t91XX-svn: start
removing use of "git-" from these tests, 2008-09-08) so that
running:
git grep git-
would return fewer hits. At the time, we were transitioning
away from the use of the "dashed" git-foo form.
That transition has been over for years, and grepping for
"git-" in the test suite yields thousands of hits anyway
(all presumably false positives).
With their original purpose gone, these variables serve only
to obfuscate the tests. Let's get rid of them.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier adjustment of test mistakenly used write_script
to prepare a file whose exact content matters for the test;
reverting that part fixes the breakage for those who use
SHELL_PATH that is different from /bin/sh.
* mg/mingw-test-fix:
t9100: fix breakage when SHELL_PATH is not /bin/sh
Test scripts have been updated to remove assumptions that are not
portable between Git for POSIX and Git for Windows, or to skip ones
with expectations that are not satisfiable on Git for Windows.
* js/mingw-tests: (21 commits)
gitignore: ignore generated test-fake-ssh executable
mingw: do not bother to test funny file names
mingw: skip a test in t9130 that cannot pass on Windows
mingw: handle the missing POSIXPERM prereq in t9124
mingw: avoid illegal filename in t9118
mingw: mark t9100's test cases with appropriate prereqs
t0008: avoid absolute path
mingw: work around pwd issues in the tests
mingw: fix t9700's assumption about directory separators
mingw: skip test in t1508 that fails due to path conversion
tests: turn off git-daemon tests if FIFOs are not available
mingw: disable mkfifo-based tests
mingw: accomodate t0060-path-utils for MSYS2
mingw: fix t5601-clone.sh
mingw: let lstat() fail with errno == ENOTDIR when appropriate
mingw: try to delete target directory before renaming
mingw: prepare the TMPDIR environment variable for shell scripts
mingw: factor out Windows specific environment setup
Git.pm: stop assuming that absolute paths start with a slash
mingw: do not trust MSYS2's MinGW gettext.sh
...
bcb11f1 (mingw: mark t9100's test cases with appropriate prereqs, 2016-01-27)
replaced "/bin/sh" in exec.sh by the shell specified in SHELL_PATH, but
that breaks the subtest which checks for a specific checksum of a tree
containing.
Revert that change that was not explained in the commit message anyways
(exec.sh is never executed).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many a test requires either POSIXPERM (to change the executable bit) or
SYMLINKS, and neither are available on Windows.
This lets t9100-git-svn-basic.sh pass in Git for Windows' SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since git-rev-parse already checks for the $GIT_DIR environment
variable and that it returns an actual git repository, there is no
need to repeat the checks again here.
This also fixes a problem where git-svn did not work in cases where
.git was a file with a gitdir: link.
[ew: squashed test case,
delay setting GIT_DIR until after `git rev-parse --cdup` to fix t9101,
(thanks to Junio)]
Signed-off-by: Barry Wardell <barry.wardell@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
open_or_add_dir checks to see if the directory already exists or not.
If it already exists and is not a directory, then we fail. However,
open_or_add_dir did not previously account for the possibility that the
path did exist as a file, but is deleted in the current commit.
In order to prevent this legitimate case from failing, open_or_add_dir
needs to know what files are deleted in the current commit.
Unfortunately that information has to be plumbed through a couple of
layers.
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Even though "-L" is POSIX, the former is more portable, and
we tend to prefer it already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Format the subshells introduced by the previous patch (Several tests:
cd inside subshell instead of around, 2010-09-06) like so:
(
cd subdir &&
...
) &&
This is generally easier to read and has the nice side-effect that
this patch will show what commands are used in the subshell, making
it easier to check for lost environment variables and similar
behavior changes.
Cc: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixed all places where it was a straightforward change from cd'ing into a
directory and back via "cd .." to a cd inside a subshell.
Found these places with "git grep -w "cd \.\.".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The dcommit command fails if an otherwise unmodified file has
been touched in the working directory:
Cannot dcommit with a dirty index. Commit your changes
first, or stash them with `git stash'.
This happens because "git diff-index" reports a difference
between the index and the filesystem:
:100644 100644 d00491...... 000000...... M file
The fix is to run "git update-index --refresh" before
"git diff-index" as is done in git-rebase and
git-rebase--interactive before "git diff-files".
This changes dcommit to display a list of modified files before
exiting.
Also add a similar test case for "git svn rebase".
[ew: rearranged commit message subject]
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
SKIP messages are now part of the TAP plan. A TAP harness now knows
why a particular test was skipped and can report that information. The
non-TAP harness built into Git's test-lib did nothing special with
these messages, and is unaffected by these changes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git svn dcommit' takes an optional revision argument, but the meaning
of it was rather scary. It completely ignored the current state of
the HEAD, only looking at the revisions between SVN and $rev. If HEAD
was attached to $branch, the branch lost all commits $rev..$branch in
the process.
Considering that 'git svn dcommit HEAD^' has the intuitive meaning
"dcommit all changes on my branch except the last one", we change the
meaning of the revision argument. git-svn temporarily checks out $rev
for its work, meaning that
* if a branch is specified, that branch (_not_ the HEAD) is rebased as
part of the dcommit,
* if some other revision is specified, as in the example, all work
happens on a detached HEAD and no branch is affected.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
I have tweaked configuration in my ~/.subversion directory, namely I am
running auto-properties and automatically adding '$Id$' expansion to
every file. This choke the last test named 'proplist' from
t9101-git-svn-props.sh, because one more property, svn:keywords is
automatically added.
I had just wrapped svn invocation with the svn_cmd that specifies empty
directory via --config-dir argument. Since the latter is the global
option, it should be recognized by all svn subcommands, so no
regressions will be introduced.
Now svn_cmd is used everywhere, not just in the failed test module: this
should guard us from the future clashes with user-defined configuration
tweaks.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Acked-by: Eric Wong <normalperson@yhbt.net>
When in a bare repository (or .git, for that matter), git-svn would fail
to initialise properly, since git rev-parse --show-cdup would not output
anything. However, git rev-parse --show-cdup actually returns an error
code if it's really not in a git directory.
Fix the issue by checking for an explicit error from git rev-parse, and
setting $git_dir appropriately if instead it just does not output.
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
This changes "git-foo" to "git foo" when message strings in tests
name git subcommands.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces 'git-svn' with 'git svn' in the tests.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subversion tests use too many "git-foo" form, so I am converting them
in two steps.
This first step replaces literal strings "remotes/git-svn" and "git-svn-id"
by introducing $remotes_git_svn and $git_svn_id constants defined as shell
variables. This will reduce the number of false hits from "git grep".
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch changes every occurrence of "! git" -- with the meaning
that a git call has to gracefully fail -- into "test_must_fail git".
This is useful to
- make sure the test does not fail because of a signal,
e.g. SIGSEGV, and
- advertise the use of "test_must_fail" for new tests.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When setting the GIT_SVN_LC_ALL variable, default to the $LANG
environment variable, when the $LC_ALL override is not set.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a general principle, we should not use "git diff" to validate the
results of what git command that is being tested has done. We would not
know if we are testing the command in question, or locating a bug in the
cute hack of "git diff --no-index".
Rather use test_cmp for that purpose.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the remainder of the issues where the test script itself is at
fault for failing when the git checkout path contains whitespace or other
shell metacharacters.
The majority of git svn tests used the idiom
test_expect_success "title" "test script using $svnrepo"
These were changed to have the test script in single-quotes:
test_expect_success "title" 'test script using "$svnrepo"'
which unfortunately makes the patch appear larger than it really is.
One consequence of this change is that in the verbose test output the
value of $svnrepo (and in some cases other variables, too) is no
longer expanded, i.e. previously we saw
* expecting success:
test script using /path/to/git/t/trash/svnrepo
but now it is:
* expecting success:
test script using "$svnrepo"
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, test_expect_failure was designed to be the opposite
of test_expect_success, but this was a bad decision. Most tests
run a series of commands that leads to the single command that
needs to be tested, like this:
test_expect_{success,failure} 'test title' '
setup1 &&
setup2 &&
setup3 &&
what is to be tested
'
And expecting a failure exit from the whole sequence misses the
point of writing tests. Your setup$N that are supposed to
succeed may have failed without even reaching what you are
trying to test. The only valid use of test_expect_failure is to
check a trivial single command that is expected to fail, which
is a minority in tests of Porcelain-ish commands.
This large-ish patch rewrites all uses of test_expect_failure to
use test_expect_success and rewrites the condition of what is
tested, like this:
test_expect_success 'test title' '
setup1 &&
setup2 &&
setup3 &&
! this command should fail
'
test_expect_failure is redefined to serve as a reminder that
that test *should* succeed but due to a known breakage in git it
currently does not pass. So if git-foo command should create a
file 'bar' but you discovered a bug that it doesn't, you can
write a test like this:
test_expect_failure 'git-foo should create bar' '
rm -f bar &&
git foo &&
test -f bar
'
This construct acts similar to test_expect_success, but instead
of reporting "ok/FAIL" like test_expect_success does, the
outcome is reported as "FIXED/still broken".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For tracking branches and tags, git-svn prefers to connect
to the root of the repository or at least the level that
houses branches and tags as well as trunk. However, users
that are accustomed to tracking a single directory have
no use for this feature.
As pointed out by Junio, users may not have permissions to
connect to connect to a higher-level path in the repository.
While the current minimize_url() function detects lack of
permissions to certain paths _after_ successful logins, it
cannot effectively determine if it is trying to access a
login-only portion of a repo when the user expects to
connect to a part where anonymous access is allowed.
For people used to the git-svnimport switches of
--trunk, --tags, --branches, they'll already pass the
repository root (or root+subdirectory), so minimize URL
isn't of too much use to them, either.
For people *not* used to git-svnimport, git-svn also
supports:
git svn init --minimize-url \
--trunk http://repository-root/foo/trunk \
--branches http://repository-root/foo/branches \
--tags http://repository-root/foo/tags
And this is where the new --minimize-url command-line switch
comes in to allow for this behavior to continue working.
Ævar Arnfjörð Bjarmason
Junio C Hamano
Andrei Rybak
Đoàn Trần Công Danh
Johannes Schindelin
Martin Ågren
Jeff King
brian m. carlson
Matthew DeVore
Eric Sunshine
Nguyễn Thái Ngọc Duy
Michael J Gruber
Eric Wong
Elia Pinto
Barry Wardell
Steven Walter
Jonathan Nieder
Jens Lehmann
David D. Kilzer
Thomas Rast
Eygene Ryabinkin
Johannes Sixt
Deskin Miller
Nanako Shiraishi
Stephan Beyer
Ramsay Jones
Bryan Donlan
Eric Wong