git submodule add no longer implicitly adds with --force. Remove
references to the old functionality in the documentation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make the behavior of "git submodule add" more consistent with "git add"
ignored submodule paths should not be silently added when they match an
entry in a .gitignore file. To be able to override that default behavior
in the same way as we can do that for "git add", the new option "--force"
is introduced.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change `git submodule add' to add the new submodule <path> with `git
add --force'.
I keep my /etc in .git with a .gitignore that contains just
"*". I.e. `git status' will ignore everything that isn't in the tree
already. When I do:
git submodule add <url> hlagh
git-submodule will get as far as checking out the remote repository
into hlagh, but it'll die right afterwards when it fails to add the
new path:
The following paths are ignored by one of your .gitignore files:
hlagh
Use -f if you really want to add them.
fatal: no files added
Failed to add submodule 'hlagh'
Currently there's no way to add a submodule in this situation other
than to remove the ignored path from the .gitignore while I'm at it.
That's silly, when you run `git submodule add' you're explicitly
saying that you want to add something *new* to the repository. Instead
it should just add the path with `git add --force'.
Initially I implemented this by adding new -f and --force options to
`git submodule add'. But if the --force option isn't supplied it'll
get as far as cloning `hlagh', but won't add it.
So the first thing the user has to do is to remove `hlagh' and then
try again with the --force option.
That sucks, it should just add the path to begin with. I can't think
of any usecase where you've gone through the trouble of typing out
`git submodule add ..', but wish to be overriden by a `gitignore'. The
submodule semantics should be more like `git init', not `git add'.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a $toplevel variable accessible to `git submodule foreach`, it
contains the absolute path of the top level directory (where
.gitmodules is).
This makes it possible to e.g. read data in .gitmodules from within
foreach commands. I'm using this to configure the branch names I want
to track for each submodule:
git submodule foreach 'git checkout $(git config --file $toplevel/.gitmodules submodule.$name.branch) && git pull'
For a little history: This patch is borne out of my continuing fight
of trying to have Git track the branches of submodules, not just their
commits.
Obviously that's not how they work (they only track commits), but I'm
just interested in being able to do:
git submodule foreach 'git pull'
Of course that won't work because the submodule is in a disconnected
head, so I first have to connect it, but connect it *to what*.
For a while I was happy with this because as fate had it, it just so
happened to do what I meant:
git submodule foreach 'git checkout $(git describe --all --always) && git pull'
But then that broke down, if there's a tag and a branch the tag will
win out, and I can't git pull a branch:
$ git branch -a
* master
remotes/origin/HEAD -> origin/master
remotes/origin/master
$ git tag -l
release-0.0.6
$ git describe --always --all
release-0.0.6
So I figured that I might as well start tracking the branches I want
in .gitmodules itself:
[submodule "yaml-mode"]
path = yaml-mode
url = git://github.com/yoshiki/yaml-mode.git
branch = master
So now I can just do (as stated above):
git submodule foreach 'git checkout $(git config --file $toplevel/.gitmodules submodule.$name.branch) && git pull'
Maybe there's a less painful way to do *that* (I'd love to hear about
it). But regardless of that I think it's a good idea to be able to
know what the top-level is from git submodule foreach.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
Use `code snippet` style instead of 'emphasis' for `git cmd ...`
according to the following rules:
* The SYNOPSIS sections are left untouched.
* If the intent is that the user type the command exactly as given, it
is `code`.
If the user is only loosely referred to a command and/or option, it
remains 'emphasised'.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
When <path> is not given, use the "humanish" part of the source repository
instead.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/submodule-foreach:
git clone: Add --recursive to automatically checkout (nested) submodules
t7407: Use 'rev-parse --short' rather than bash's substring expansion notation
git submodule status: Add --recursive to recurse into nested submodules
git submodule update: Introduce --recursive to update nested submodules
git submodule foreach: Add --recursive to recurse into nested submodules
git submodule foreach: test access to submodule name as '$name'
Add selftest for 'git submodule foreach'
git submodule: Cleanup usage string and add option parsing to cmd_foreach()
git submodule foreach: Provide access to submodule name, as '$name'
Conflicts:
Documentation/git-submodule.txt
git-submodule.sh
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only show
status for all the submodules in the current repo (which is what is
currently done by 'git submodule status'), but also to show status for
all submodules at all levels (i.e. recursing into nested submodules as
well).
This patch teaches the new --recursive option to the 'git submodule status'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only update
the submodules in the current repo (which is what is currently done by
'git submodule update'), but also to operate on all submodules at all
levels (i.e. recursing into nested submodules as well).
This patch teaches the new --recursive option to the 'git submodule update'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only operate
on all the submodules in the current repo (which is what is currently done
by 'git submodule foreach'), but also to operate on all submodules at all
levels (i.e. recursing into nested submodules as well).
This patch teaches the new --recursive option to the 'git submodule foreach'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The argument to 'git submodule foreach' already has access to the variables
'$path' (the path to the submodule, relative to the superproject) and '$sha1'
(the submodule commit recorded by the superproject).
This patch adds another variable -- '$name' -- which contains the name of the
submodule, as recorded in the superproject's .gitmodules file.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git submodule summary is providing similar functionality for submodules as
git diff-index does for a git project (including the meaning of --cached).
But the analogon to git diff-files is missing, so add a --files option to
summarize the differences between the index of the super project and the
last commit checked out in the working tree of the submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option --merge was missing for submodule update and --cached for
submodule summary.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
attr: plug minor memory leak
request-pull: really disable pager
Makes some cleanup/review in gittutorial
Makefile: git.o depends on library headers
git-submodule documentation: fix foreach example
Backtick and apostrophe are asciidoc markup, so they should be escaped
in order to get the expected result in the rendered manual page.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git submodule update --merge' merges the commit referenced by the
superproject into your local branch, instead of checking it out on
a detached HEAD.
As evidenced by the addition of "git submodule update --rebase", it
is useful to provide alternatives to the default 'checkout' behaviour
of "git submodule update". One such alternative is, when updating a
submodule to a new commit, to merge that commit into the current
local branch in that submodule. This is useful in workflows where
you want to update your submodule from its upstream, but you cannot
use --rebase, because you have downstream people working on top of
your submodule branch, and you don't want to disrupt their work.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The addition of "submodule.<name>.rebase" demonstrates the usefulness of
alternatives to the default behaviour of "git submodule update". However,
by naming the config variable "submodule.<name>.rebase", and making it a
boolean choice, we are artificially constraining future git versions that
may want to add _more_ alternatives than just "rebase".
Therefore, while "submodule.<name>.rebase" is not yet in a stable git
release, future-proof it, by changing it from
submodule.<name>.rebase = true/false
to
submodule.<name>.update = rebase/checkout
where "checkout" specifies the default behaviour of "git submodule update"
(checking out the new commit to a detached HEAD), and "rebase" specifies
the --rebase behaviour (where the current local branch in the submodule is
rebase onto the new commit). Thus .update == checkout is equivalent to
.rebase == false, and .update == rebase is equivalent to .rebase == true.
Finally, leaving .update unset is equivalent to leaving .rebase unset.
In future git versions, other alternatives to "git submodule update"
behaviour can be included by adding them to the list of allowable values
for the submodule.<name>.update variable.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds --reference option to git submodule add and
git submodule update commands, which is passed to git clone.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git submodule update --rebase' rebases your local branch on top of what
would have been checked out to a detached HEAD otherwise.
In some cases, detaching the HEAD when updating a submodule complicates
the workflow to commit to this submodule (checkout master, rebase, then
commit). For submodules that require frequent updates but infrequent
(if any) commits, a rebase can be executed directly by the git-submodule
command, ensuring that the submodules stay on their respective branches.
git-config key: submodule.$name.rebase (bool)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git submodule update --no-fetch makes it possible to use git submodule
update in complete offline mode by not fetching new revisions.
This does make sense in the following setup:
* There is an unstable and a stable branch in the super/master repository.
* The submodules might be at different revisions in the branches.
* You are at some place without internet connection ;)
With this patch it is now possible to change branches and update
the submodules to be at the recorded revision without online access.
Another advantage is that with -N the update operation is faster, because fetch is checking for new updates even if there was no fetch/pull on the super/master repository since the last update.
Signed-off-by: Fabian Franz <git@fabian-franz.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule's URL changes upstream, existing submodules
will be out of sync since their remote."$origin".url will still
be set to the old value.
This adds a "git submodule sync" command that reads submodules'
URLs from .gitmodules and updates them accordingly.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule foreach <command-list> will execute the list of commands in
each currently checked out submodule directory. The list of commands
is arbitrary as long as it is acceptable to sh. The variables '$path'
and '$sha1' are availble to the command-list, defining the submodule
path relative to the superproject and the submodules's commitID as
recorded in the superproject (this may be different than HEAD in the
submodule).
This utility is inspired by a number of threads on the mailing list
looking for ways to better integrate submodules in a tree and work
with them as a unit. This could include fetching a new branch in each
from a given source, or possibly checking out a given named branch in
each. Currently, there is no consensus as to what additional commands
should be implemented in the porcelain, requiring all users whose needs
exceed that of git-submodule to do their own scripting. The foreach
command is intended to support such scripting, and in particular does
no error checking and produces no output, thus allowing end users
complete control over any information printed out and over what
constitutes an error. The processing does terminate if the command-list
returns an error, but processing can easily be forced for all
submodules be terminating the list with ';true'.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the SYNOPSIS says e.g. "<path>...", it is nice if the DESCRIPTION
also mentions "<path>..." and says the specified "paths" (note plural)
are used for $whatever. This fixes the obvious mismatches.
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch rewrites the general description yet again, first clarifying
the high-level concept, mentioning the difference to remotes and using
the subtree merge strategy, then getting to the details about tree
entries and .gitmodules file.
The patch also makes few smallar grammar fixups within the rest of the
description and clarifies how does 'init' relate to 'update --init'.
Cc: Heikki Orsila <shdl@zakalwe.fi>
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Figuring out how submodules work conceptually is quite a bumpy
ride for a newcomer; the user manual helps (if one knows to actually
look into it), but the reference documentation should provide good
quick intro as well. This patch attempts to do that, with suggestions
from Heikki Orsila.
Cc: Heikki Orsila <shdl@zakalwe.fi>
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change makes "submodule add" much more strict in the arguments it
takes, and is intended to address confusion as recently noted on the
git-list. With this change, the required syntax is:
$ git submodule add URL path
Specifically, this eliminates the form
$ git submodule add URL
which was confused by more than one person as
$ git submodule add path
With this patch, the URL locating the submodule's origin repository can be
either an absolute URL, or (if it begins with ./ or ../) can express the
submodule's repository location relative to the superproject's origin.
This patch also eliminates a third form of URL, which was relative to the
superproject's top-level directory (not its repository). Any URL that was
neither absolute nor matched ./*|../* was assumed to point to a
subdirectory of the superproject as the location of the submodule's origin
repository. This URL form was confusing and does not seem to correspond
to an important use-case. Specifically, no-one has identified the need to
clone from a repository already in the superproject's tree, but if this is
needed it is easily done using an absolute URL: $(pwd)/relative-path. So,
no functionality is lost with this patch. (t6008-rev-list-submodule.sh did
rely upon this relative URL, fixed by using $(pwd).)
Following this change, there are exactly four variants of
submodule-add, as both arguments have two flavors:
URL can be absolute, or can begin with ./|../ and thus names the
submodule's origin relative to the superproject's origin.
Note: With this patch, "submodule add" discerns an absolute URL as
matching /*|*:*: e.g., URL begins with /, or it contains a :. This works
for all valid URLs, an absolute path in POSIX, as well as an absolute path
on Windows).
path can either already exist as a valid git repo, or will be cloned from
the given URL. The first form here eases creation of a new submodule in
an existing superproject as the submodule can be added and tested in-tree
before pushing to the public repository. However, the more usual form is
the second, where the repo is cloned from the given URL.
This specifically addresses the issue of
$ git submodule add a/b/c
attempting to clone from a repository at "a/b/c" to create a new module
in "c". This also simplifies description of "relative URL" as there is now
exactly *one* form: a URL relative to the parent's origin repo.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule is not initialized and you do not want to change the
defaults from .gitmodules anyway, you can now say
$ git submodule update --init <name>
When "update" is called without --init on an uninitialized submodule,
a hint to use --init is printed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working in the top-level project, it is useful to create a new
submodule as a git repo in a subdirectory, then add that submodule to
the top-level in place.
This patch allows "git submodule add <intended url> subdir" to add the
existing subdir to the current project. The presumption is the user will
later push / clone the subdir to the <intended url> so that future
submodule init / updates will work.
Absent this patch, "git submodule add" insists upon cloning the subdir
from a repository at the given url, which is fine for adding an existing
project in, but less useful when adding a new submodule from scratch to an
existing project. The former functionality remains, and the clone is
attempted if the subdir does not already exist as a valid git repo.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only "status" accepts "--cached" and the preferred way of
passing sub-command specific options is after the sub-command.
The documentation is adapted to reflect this.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows a subproject's location to be specified and stored as relative
to the parent project's location (e.g., ./foo, or ../foo). This url is
stored in .gitmodules as given. It is resolved into an absolute url by
appending it to the parent project's url when the information is written
to .git/config (i.e., during submodule add for the originator, and
submodule init for a downstream recipient). This allows cloning of the
project to work "as expected" if the project is hosted on a different
server than when the subprojects were added.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-submodule was updated to allow mapping between submodule name and
submodule path, the documentation was left untouched.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ævar Arnfjörð Bjarmason
Jens Lehmann
Ralf Wildenhues
Thomas Rast
Junio C Hamano
Johan Herland
Lars Hjemli
Miklos Vajna
Michael S. Tsirkin
Peter Hutterer
Fabian Franz
Markus Heidelberg
David Aguilar
Mark Levedahl
Abhijit Menon-Sen
Cesar Eduardo Barros
Petr Baudis
Jonathan Nieder
Stephan Beyer
Christian Couder
Johannes Schindelin
Ping Yin
Steffen Prohaska
Dan McGee
Mark Levedahl