The machinery to clone & fetch, which in turn involves packing and
unpacking objects, have been told how to omit certain objects using
the filtering mechanism introduced by the jh/object-filtering
topic, and also mark the resulting pack as a promisor pack to
tolerate missing objects, taking advantage of the mechanism
introduced by the jh/fsck-promisors topic.
* jh/partial-clone:
t5616: test bulk prefetch after partial fetch
fetch: inherit filter-spec from partial clone
t5616: end-to-end tests for partial clone
fetch-pack: restore save_commit_buffer after use
unpack-trees: batch fetching of missing blobs
clone: partial clone
partial-clone: define partial clone settings in config
fetch: support filters
fetch: refactor calculation of remote list
fetch-pack: test support excluding large blobs
fetch-pack: add --no-filter
fetch-pack, index-pack, transport: partial clone
upload-pack: add object filtering for partial clone
Move the definition of the transport-specific functions provided by
transports, whether declared in transport.c or transport-helper.c, into
an internal header. This means that transport-using code (as opposed to
transport-declaring code) can no longer access these functions (without
importing the internal header themselves), making it clear that they
should use the transport_*() functions instead, and also allowing the
interface between the transport mechanism and an individual transport to
independently evolve.
This is superficially a reversal of commit 824d5776c3 ("Refactor
struct transport_ops inlined into struct transport", 2007-09-19).
However, the scope of the involved variables was neither affected nor
discussed in that commit, and I think that the advantages in making
those functions more private outweigh the advantages described in that
commit's commit message. A minor additional point is that the code has
gotten more complicated since then, in that the function-pointer
variables are potentially mutated twice (once initially and once if
transport_take_over() is invoked), increasing the value of corralling
them into their own struct.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Transfer ownership of detached strbufs to string_lists of the
duplicating variety by calling string_list_append_nodup() instead of
string_list_append() to avoid duplicating and then leaking the buffer.
While at it make sure to release the string_list when done;
push_refs_with_export() already does that.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert resolve_ref_unsafe to take a pointer to struct object_id by
converting one remaining caller to use struct object_id, removing the
temporary NULL pointer check in expand_ref, converting the declaration
and definition, and applying the following semantic patch:
@@
expression E1, E2, E3, E4;
@@
- resolve_ref_unsafe(E1, E2, E3.hash, E4)
+ resolve_ref_unsafe(E1, E2, &E3, E4)
@@
expression E1, E2, E3, E4;
@@
- resolve_ref_unsafe(E1, E2, E3->hash, E4)
+ resolve_ref_unsafe(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All but two of the call sites already have parameters using the hash
parameter of struct object_id, so convert them to take a pointer to the
struct directly. Also convert refs_read_refs_full, the underlying
implementation.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert update_ref, refs_update_ref, and write_pseudoref to use struct
object_id. Update the existing callers as well. Remove update_ref_oid,
as it is no longer needed.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many codepaths did not diagnose write failures correctly when disks
go full, due to their misuse of write_in_full() helper function,
which have been corrected.
* jk/write-in-full-fix:
read_pack_header: handle signed/unsigned comparison in read result
config: flip return value of store_write_*()
notes-merge: use ssize_t for write_in_full() return value
pkt-line: check write_in_full() errors against "< 0"
convert less-trivial versions of "write_in_full() != len"
avoid "write_in_full(fd, buf, len) != len" pattern
get-tar-commit-id: check write_in_full() return against 0
config: avoid "write_in_full(fd, buf, len) < len" pattern
Many leaks of strbuf have been fixed.
* rs/strbuf-leakfix: (34 commits)
wt-status: release strbuf after use in wt_longstatus_print_tracking()
wt-status: release strbuf after use in read_rebase_todolist()
vcs-svn: release strbuf after use in end_revision()
utf8: release strbuf on error return in strbuf_utf8_replace()
userdiff: release strbuf after use in userdiff_get_textconv()
transport-helper: release strbuf after use in process_connect_service()
sequencer: release strbuf after use in save_head()
shortlog: release strbuf after use in insert_one_record()
sha1_file: release strbuf on error return in index_path()
send-pack: release strbuf on error return in send_pack()
remote: release strbuf after use in set_url()
remote: release strbuf after use in migrate_file()
remote: release strbuf after use in read_remote_branches()
refs: release strbuf on error return in write_pseudoref()
notes: release strbuf after use in notes_copy_from_stdin()
merge: release strbuf after use in write_merge_heads()
merge: release strbuf after use in save_state()
mailinfo: release strbuf on error return in handle_boundary()
mailinfo: release strbuf after use in handle_from()
help: release strbuf on error return in exec_woman_emacs()
...
The return value of write_in_full() is either "-1", or the
requested number of bytes[1]. If we make a partial write
before seeing an error, we still return -1, not a partial
value. This goes back to f6aa66cb95 (write_in_full: really
write in full or return error on disk full., 2007-01-11).
So checking anything except "was the return value negative"
is pointless. And there are a couple of reasons not to do
so:
1. It can do a funny signed/unsigned comparison. If your
"len" is signed (e.g., a size_t) then the compiler will
promote the "-1" to its unsigned variant.
This works out for "!= len" (unless you really were
trying to write the maximum size_t bytes), but is a
bug if you check "< len" (an example of which was fixed
recently in config.c).
We should avoid promoting the mental model that you
need to check the length at all, so that new sites are
not tempted to copy us.
2. Checking for a negative value is shorter to type,
especially when the length is an expression.
3. Linus says so. In d34cf19b89 (Clean up write_in_full()
users, 2007-01-11), right after the write_in_full()
semantics were changed, he wrote:
I really wish every "write_in_full()" user would just
check against "<0" now, but this fixes the nasty and
stupid ones.
Appeals to authority aside, this makes it clear that
writing it this way does not have an intentional
benefit. It's a historical curiosity that we never
bothered to clean up (and which was undoubtedly
cargo-culted into new sites).
So let's convert these obviously-correct cases (this
includes write_str_in_full(), which is just a wrapper for
write_in_full()).
[1] A careful reader may notice there is one way that
write_in_full() can return a different value. If we ask
write() to write N bytes and get a return value that is
_larger_ than N, we could return a larger total. But
besides the fact that this would imply a totally broken
version of write(), it would already invoke undefined
behavior. Our internal remaining counter is an unsigned
size_t, which means that subtracting too many byte will
wrap it around to a very large number. So we'll instantly
begin reading off the end of the buffer, trying to write
gigabytes (or petabytes) of data.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a file .tsan-suppressions and list two functions in it: want_color()
and transfer_debug(). Both of these use the pattern
static int foo = -1;
if (foo < 0)
foo = bar();
where bar always returns the same non-negative value. This can cause
ThreadSanitizer to diagnose a race when foo is written from two threads.
That is indeed a race, although it arguably doesn't matter in practice
since it's always the same value that is written.
Add NEEDSWORK-comments to the functions so that this problem is not
forever swept way under the carpet.
The suppressions-file is used by setting the environment variable
TSAN_OPTIONS to, e.g., "suppressions=$(pwd)/.tsan-suppressions". Observe
that relative paths such as ".tsan-suppressions" might not work.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the result of the just-added coccinelle rule. This manually
excludes a few occurrences, mostly things that resulted in many
FREE_AND_NULL() on one line, that'll be manually fixed in a subsequent
change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can use xsnprintf to do our truncation check with less
code. The error message isn't as specific, but the point is
that this isn't supposed to trigger in the first place
(because our buffer is big enough to handle any int).
Signed-off-by: Jeff King <peff@peff.net>
"git ls-remote" and "git archive --remote" are designed to work
without being in a directory under Git's control. However, recent
updates revealed that we randomly look into a directory called
.git/ without actually doing necessary set-up when working in a
repository. Stop doing so.
* jn/remote-helpers-with-git-dir:
remote helpers: avoid blind fall-back to ".git" when setting GIT_DIR
remote: avoid reading $GIT_DIR config in non-repo
To push from or fetch to the current repository, remote helpers need
to know what repository that is. Accordingly, Git sets the GIT_DIR
environment variable to the path to the current repository when
invoking remote helpers.
There is a special case it does not handle: "git ls-remote" and "git
archive --remote" can be run to inspect a remote repository without
being run from any local repository. GIT_DIR is not useful in this
scenario:
- if we are not in a repository, we don't need to set GIT_DIR to
override an existing GIT_DIR value from the environment. If GIT_DIR
is present then we would be in a repository if it were valid and
would have called die() if it weren't.
- not setting GIT_DIR may cause a helper to do the usual discovery
walk to find the repository. But we know we're not in one, or we
would have found it ourselves. So in the worst case it may expend
a little extra effort to try to find a repository and fail (for
example, remote-curl would do this to try to find repository-level
configuration).
So leave GIT_DIR unset in this case. This makes GIT_DIR easier to
understand for remote helper authors and makes transport code less of
a special case for repository discovery.
Noticed using b1ef400e (setup_git_env: avoid blind fall-back to
".git", 2016-10-20) from 'next':
$ cd /tmp
$ git ls-remote https://kernel.googlesource.com/pub/scm/git/git
fatal: BUG: setup_git_env called without repository
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using non-builtin protocols relying on a transport helper
(such as http), push options are not propagated to the helper.
The user could ask for push options and a push would seemingly succeed,
but the push options would never be transported to the server,
misleading the users expectation.
Fix this by propagating the push options to the transport helper.
This is only addressing the first issue of
(1) the helper protocol does not propagate push-option
(2) the http helper is not prepared to handle push-option
Once we fix (2), the http transport helper can make use of push options
as well, but that happens as a follow up. (1) is a bug fix, whereas (2)
is a feature, which is why we only do (1) here.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing "git fetch --depth=<n>" option was hard to use
correctly when making the history of an existing shallow clone
deeper. A new option, "--deepen=<n>", has been added to make this
easier to use. "git clone" also learned "--shallow-since=<date>"
and "--shallow-exclude=<tag>" options to make it easier to specify
"I am interested only in the recent N months worth of history" and
"Give me only the history since that version".
* nd/shallow-deepen: (27 commits)
fetch, upload-pack: --deepen=N extends shallow boundary by N commits
upload-pack: add get_reachable_list()
upload-pack: split check_unreachable() in two, prep for get_reachable_list()
t5500, t5539: tests for shallow depth excluding a ref
clone: define shallow clone boundary with --shallow-exclude
fetch: define shallow boundary with --shallow-exclude
upload-pack: support define shallow boundary by excluding revisions
refs: add expand_ref()
t5500, t5539: tests for shallow depth since a specific date
clone: define shallow clone boundary based on time with --shallow-since
fetch: define shallow boundary with --shallow-since
upload-pack: add deepen-since to cut shallow repos based on time
shallow.c: implement a generic shallow boundary finder based on rev-list
fetch-pack: use a separate flag for fetch in deepening mode
fetch-pack.c: mark strings for translating
fetch-pack: use a common function for verbose printing
fetch-pack: use skip_prefix() instead of starts_with()
upload-pack: move rev-list code out of check_non_tip()
upload-pack: make check_non_tip() clean things up on error
upload-pack: tighten number parsing at "deepen" lines
...
The N_() no-op call currently marks the string to be extracted by
xgettext but doesn't trigger the retrieval of the translation at run
time, whereas _() does both. Meaning that, in spite of having
translations available, they were never retrieved to make use of them.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-fetch, --depth argument is always relative with the latest
remote refs. This makes it a bit difficult to cover this use case,
where the user wants to make the shallow history, say 3 levels
deeper. It would work if remote refs have not moved yet, but nobody
can guarantee that, especially when that use case is performed a
couple months after the last clone or "git fetch --depth". Also,
modifying shallow boundary using --depth does not work well with
clones created by --since or --not.
This patch fixes that. A new argument --deepen=<N> will add <N> more (*)
parent commits to the current history regardless of where remote refs
are.
Have/Want negotiation is still respected. So if remote refs move, the
server will send two chunks: one between "have" and "want" and another
to extend shallow history. In theory, the client could send no "want"s
in order to get the second chunk only. But the protocol does not allow
that. Either you send no want lines, which means ls-remote; or you
have to send at least one want line that carries deep-relative to the
server..
The main work was done by Dongcan Jiang. I fixed it up here and there.
And of course all the bugs belong to me.
(*) We could even support --deepen=<N> where <N> is negative. In that
case we can cut some history from the shallow clone. This operation
(and --depth=<shorter depth>) does not require interaction with remote
side (and more complicated to implement as a result).
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Dongcan Jiang <dongcan.jiang@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For now we can handle two types, string and boolean, in
set_helper_option(). Later on we'll add string_list support, which does
not fit well. The new function strbuf_set_helper_option() can be reused
for a separate function that handles string-list.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for warning_errno/die_errno has been refactored and a new
error_errno() reporting helper is introduced.
* nd/error-errno: (41 commits)
wrapper.c: use warning_errno()
vcs-svn: use error_errno()
upload-pack.c: use error_errno()
unpack-trees.c: use error_errno()
transport-helper.c: use error_errno()
sha1_file.c: use {error,die,warning}_errno()
server-info.c: use error_errno()
sequencer.c: use error_errno()
run-command.c: use error_errno()
rerere.c: use error_errno() and warning_errno()
reachable.c: use error_errno()
mailmap.c: use error_errno()
ident.c: use warning_errno()
http.c: use error_errno() and warning_errno()
grep.c: use error_errno()
gpg-interface.c: use error_errno()
fast-import.c: use error_errno()
entry.c: use error_errno()
editor.c: use error_errno()
diff-no-index.c: use error_errno()
...
Many instances of duplicate words (e.g. "the the path") and
a few typoes are fixed, originally in multiple patches.
wildmatch: fix duplicate words of "the"
t: fix duplicate words of "output"
transport-helper: fix duplicate words of "read"
Git.pm: fix duplicate words of "return"
path: fix duplicate words of "look"
pack-protocol.txt: fix duplicate words of "the"
precompose-utf8: fix typo of "sequences"
split-index: fix typo
worktree.c: fix typo
remote-ext: fix typo
utf8: fix duplicate words of "the"
git-cvsserver: fix duplicate words
Signed-off-by: Li Peng <lip@dtdream.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" and friends that make network connections can now be
told to only use ipv4 (or ipv6).
* ew/force-ipv4:
connect & http: support -4 and -6 switches for remote operations
Sometimes it is necessary to force IPv4-only or IPv6-only operation
on networks where name lookups may return a non-routable address and
stall remote operations.
The ssh(1) command has an equivalent switches which we may pass when
we run them. There may be old ssh(1) implementations out there
which do not support these switches; they should report the
appropriate error in that case.
rsync support is untouched for now since it is deprecated and
scheduled to be removed.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Reviewed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our implementation of helpers never use CRLF line endings, and they
do not depend on the ability to place a CR as payload at the end of
the line, so this is essentially a no-op for in-tree users. However,
this allows third-party implementation of helpers to give us their
line with CRLF line ending (they cannot expect us to feed CRLF to
them, though).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now there is no direct caller to strbuf_getline(), we can demote it
to file-scope static that is private to strbuf.c and rename it to
strbuf_getdelim(). Rename strbuf_getline_crlf(), which is designed
to be the most "text friendly" variant, and allow it to take over
this simplest name, strbuf_getline(), so we can add more uses of it
without having to type _crlf over and over again in the coming
steps.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strbuf_getline() interface allows a byte other than LF or NUL as
the line terminator, but this is only because I wrote these
codepaths anticipating that there might be a value other than NUL
and LF that could be useful when I introduced line_termination long
time ago. No useful caller that uses other value has emerged.
By now, it is clear that the interface is overly broad without a
good reason. Many codepaths have hardcoded preference to read
either LF terminated or NUL terminated records from their input, and
then call strbuf_getline() with LF or NUL as the third parameter.
This step introduces two thin wrappers around strbuf_getline(),
namely, strbuf_getline_lf() and strbuf_getline_nul(), and
mechanically rewrites these call sites to call either one of
them. The changes contained in this patch are:
* introduction of these two functions in strbuf.[ch]
* mechanical conversion of all callers to strbuf_getline() with
either '\n' or '\0' as the third parameter to instead call the
respective thin wrapper.
After this step, output from "git grep 'strbuf_getline('" would
become a lot smaller. An interim goal of this series is to make
this an empty set, so that we can have strbuf_getline_crlf() take
over the shorter name strbuf_getline().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use struct object_id in three fields in struct ref and convert all the
necessary places that use it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
If we are cloning an untrusted remote repository into a
sandbox, we may also want to fetch remote submodules in
order to get the complete view as intended by the other
side. However, that opens us up to attacks where a malicious
user gets us to clone something they would not otherwise
have access to (this is not necessarily a problem by itself,
but we may then act on the cloned contents in a way that
exposes them to the attacker).
Ideally such a setup would sandbox git entirely away from
high-value items, but this is not always practical or easy
to set up (e.g., OS network controls may block multiple
protocols, and we would want to enable some but not others).
We can help this case by providing a way to restrict
particular protocols. We use a whitelist in the environment.
This is more annoying to set up than a blacklist, but
defaults to safety if the set of protocols git supports
grows). If no whitelist is specified, we continue to default
to allowing all protocols (this is an "unsafe" default, but
since the minority of users will want this sandboxing
effect, it is the only sensible one).
A note on the tests: ideally these would all be in a single
test file, but the git-daemon and httpd test infrastructure
is an all-or-nothing proposition rather than a test-by-test
prerequisite. By putting them all together, we would be
unable to test the file-local code on machines without
apache.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The client side codepaths in "git push" have been cleaned up
and the user can request to perform an optional "signed push",
i.e. sign only when the other end accepts signed push.
* db/push-sign-if-asked:
push: add a config option push.gpgSign for default signed pushes
push: support signing pushes iff the server supports it
builtin/send-pack.c: use parse_options API
config.c: rename git_config_maybe_bool_text and export it as git_parse_maybe_bool
transport: remove git_transport_options.push_cert
gitremote-helpers.txt: document pushcert option
Documentation/git-send-pack.txt: document --signed
Documentation/git-send-pack.txt: wrap long synopsis line
Documentation/git-push.txt: document when --signed may fail
Add a new flag --sign=true (or --sign=false), which means the same
thing as the original --signed (or --no-signed). Give it a third
value --sign=if-asked to tell push and send-pack to send a push
certificate if and only if the server advertised a push cert nonce.
If not, warn the user that their push may not be as secure as they
thought.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check the return value of read_ref in 19 out of 21 cases.
This adds checks to the missing cases.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push --signed" gave an incorrectly worded error message when
the other side did not support the capability.
* jc/push-cert:
transport-helper: fix typo in error message when --signed is not supported
"git fetch" over a remote-helper that cannot respond to "list"
command could not fetch from a symbolic reference e.g. HEAD.
* mh/deref-symref-over-helper-transport:
transport-helper: do not request symbolic refs to remote helpers
The transport-helper did not give transport options such as
verbosity, progress, cloning, etc. to import and export based
helpers, like it did for fetch and push based helpers, robbing them
the chance to honor the wish of the end-users better.
* mh/transport-capabilities:
transport-helper: ask the helper to set the same options for import as for fetch
transport-helper: ask the helper to set progress and verbosity options after asking for its capabilities
"git push --signed" gave an incorrectly worded error message when
the other side did not support the capability.
* jc/push-cert:
transport-helper: fix typo in error message when --signed is not supported
A few files include the same header file directly more than once.
As all these headers protect themselves against repeated inclusion
by the "#ifndef FOO_H / #define FOO_H / ... / #endif" idiom, leave
only the first inclusion and remove the later inclusion as a no-op
clean-up.
Signed-off-by: Дилян Палаузов <git-dpa@aegee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Jonathan Tan
René Scharfe
Jeff Hostetler
brian m. carlson
Jeff King
Martin Ågren
Ævar Arnfjörð Bjarmason
Jonathan Nieder
Stefan Beller
Ville Skyttä
Vasco Almeida
Nguyễn Thái Ngọc Duy
Li Peng
Eric Wong
Dave Borowitz
Дилян Палаузов