This behavior was added in 07d7bed (add: don't complain when adding
empty project root - 2009-04-28) then broken by 84b8b5d (remove
match_pathspec() in favor of match_pathspec_depth() -
2013-07-14). Reinstate it.
Noticed-by: Thomas Ferris Nicolaisen <tfnico@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many instances where the treatment of symbolic links in the
object model and the algorithms are tested, but where it is not
necessary to actually have a symbolic link in the worktree. Make
adjustments to the tests and remove the SYMLINKS prerequisite when
appropriate in trivial cases, where "trivial" means:
- merely a replacement of 'ln -s a b && git add b' by test_ln_s_add
is needed;
- a test for symbolic link on the file system can be split off (and
remains protected by SYMLINKS);
- existing code is equivalent to test_ln_s_add.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running "git add --refresh <pathspec>", we incorrectly showed the
path that is unmerged even if it is outside the specified pathspec, even
though we did honor pathspec and refreshed only the paths that matched.
Note that this cange does not affect "git update-index --refresh"; for
hysterical raisins, it does not take a pathspec (it takes real paths) and
more importantly itss command line options are parsed and executed one by
one as they are encountered, so "git update-index --refresh foo" means
"first refresh the index, and then update the entry 'foo' by hashing the
contents in file 'foo'", not "refresh only entry 'foo'".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "did not match any files" message translatable, and skip the
test that checks for it when the C_LOCALE_OUTPUT prereq is not
present.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests t2204 (.gitignore) and t3700 (add) explicitly check for
these messages, so while at it, split each relevant test into a part
that just checks "git add"'s exit status and a part that checks
porcelain output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests depend on not being able to write to files after chmod
-w. This doesn't work when running the tests as root.
Change test-lib.sh to test if this works, and if so it sets a new
SANITY test prerequisite. The tests that use this previously failed
when run under root.
There was already a test for this in t3600-rm.sh, added by Junio C
Hamano in 2283645 in 2006. That check now uses the new SANITY
prerequisite.
Some of this was resurrected from the "Tests in Cygwin" thread in May
2009:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One test case checked the stdout and stderr of 'git add' by constructing a
single 'expect' file that contained both streams. But when the command
runs, the order of stdout and stderr output is unpredictable because it
depends on how the streams are buffered. At least on Windows, the buffering
is different from what the test case expected. Hence, check the two output
texts separately.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two lines use the negation '!' operator to negate the result of a
simple command. Since these commands do not contain any pipes or other
complexities, the test_must_fail function can be used and is preferred
since it will additionally detect termination due to a signal.
This was noticed because the second use of '!' does not include a space
between the '!' and the opening parens. Ksh interprets this as follows:
!(pattern-list)
Matches anything except one of the given patterns.
Ksh performs a file glob using the pattern-list and then tries to execute
the first file in the list. If a space is added between the '!' and the
open parens, then Ksh will not interpret it as a pattern list, but in this
case, it is preferred to use test_must_fail, so lets do so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it is useful to know if a file or directory will be ignored
before it is added to the work tree. An example is "git submodule add",
where it would be really nice to be able to fail with an appropriate
error message before the submodule is cloned and checked out.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lines that begin with "ok" confuse the TAP harness because it can't
distinguish them from a test counter. Work around the issue by saying
"pass" instead, which isn't a reserved TAP word.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for 'git add -u pathspec' and 'git add pathspec' where
pathspec does not exist. The expected result is that git add exits with
an error message and an appropriate exit code.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new test does a 'chmod 0', which does not have the intended
effect on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/maint-1.6.0-add-config-fix:
add: allow configurations to be overriden by command line
use xstrdup, not strdup in ll-merge.c
Conflicts:
builtin-add.c
Don't call git_config after parsing the command line options, otherwise
the config settings will override any settings made by the command line.
This can be seen by setting add.ignore_errors and then specifying
--no-ignore-errors when using git-add.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a path F that matches ignore pattern has a conflict, "git add F"
insisted the -f option be given, which did not make sense. It would have
required -f when the path was originally added, but when resolving a
conflict, it already is tracked.
So this should work (and does):
$ echo file >.gitignore
$ echo content >file
$ git add -f file ;# need -f because we are adding new path
$ echo more content >>file
$ git add file ;# don't need -f; it is not actually an "other" file
This is handled under the hood by the COLLECT_IGNORED option to
read_directory. When that code finds an ignored file, it checks the
index to make sure it is not actually a tracked file. However, the test
it uses does not take into account unmerged entries, and considers them
to still be ignored. "git ls-files" uses a more elaborate test and gets
the right answer and the same test should be used here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test verifies that glob special characters can be escaped with
backslashes. In particular, the string fo\[ou\]bar is given to git.
On Windows, this does not work because backslashes are first of all
directory separators, and first thing git does with a pathspec from the
command line is to convert backslashes to forward slashes.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Many tests depend on that symbolic links work. This introduces a check
that sets the prerequisite tag SYMLINKS if the file system supports
symbolic links. Since so many tests have to check for this prerequisite,
we do the check in test-lib.sh, so that we don't need to repeat the test
in many scripts.
To check for 'ln -s' failures, you can use a FAT partition on Linux:
$ mkdosfs -C git-on-fat 1000000
$ sudo mount -o loop,uid=j6t,gid=users,shortname=winnt git-on-fat /mnt
Clone git to /mnt and
$ GIT_SKIP_TESTS='t0001.1[34] t0010 t1301 t403[34] t4129.[47] t5701.7
t7701.3 t9100 t9101.26 t9119 t9124.[67] t9200.10 t9600.6' \
make test
(These additionally skipped tests depend on POSIX permissions that FAT on
Linux does not provide.)
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
We try to avoid using the "-q" or "-e" options, as they are
largely useless, as explained in aadbe44f.
There is one exception for "-e" here, which is in t7701 used
to produce an "or" of patterns. This can be rewritten as an
egrep pattern.
This patch also removes use of "grep -F" in favor of the
more widely available "fgrep".
[sp: Tested on AIX 5.3 by Mike Ralphson,
Tested on MinGW by Johannes Sixt]
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Mike Ralphson <mike@abacus.co.uk>
Tested-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Use square brackets instead.
And the prominent example of the deficiency are, as usual, the filesystems
of Microsoft house.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
match_one implements an optimized pathspec match where it only uses
fnmatch if it detects glob special characters in the pattern. Unfortunately
it didn't treat \ as a special character, so attempts to escape a glob
special character would fail even though fnmatch() supports it.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch changes every occurrence of "! git" -- with the meaning
that a git call has to gracefully fail -- into "test_must_fail git".
This is useful to
- make sure the test does not fail because of a signal,
e.g. SIGSEGV, and
- advertise the use of "test_must_fail" for new tests.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/add-unreadable:
Add a config option to ignore errors for git-add
Add a test for git-add --ignore-errors
Add --ignore-errors to git-add to allow it to skip files with read errors
Extend interface of add_files_to_cache to allow ignore indexing errors
Make the exit code of add_file_to_index actually useful
On some shells (notably /bin/sh on FreeBSD 6.1), the
construct
foo && ! bar | baz
is true if
foo && baz
whereas for most other shells (such as bash) is true if
foo && ! baz
We can work around this by specifying
foo && ! (bar | baz)
which works everywhere.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In "dir_struct", each exclusion element in the exclusion stack records a
base string (pointer to the beginning with length) so that we can tell
where it came from, but this pointer is just pointing at the parameter
that is given by the caller to the push_exclude_per_directory()
function.
While read_directory_recursive() runs, calls to excluded() makes use
the data in the exclusion elements, including this base string. The
caller of read_directory_recursive() is not supposed to free the
buffer it gave to push_exclude_per_directory() earlier, until it
returns.
The test case Bruce Stephens gave in the mailing list discussion
was simplified and added to the t3700 test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows to refresh only a subset of the project files, based on
the specified pathspecs.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hashed contents did not matter in the end result, but it passed
an uninitialized variable to printf, which caused it to emit empty
while giving an error/usage message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 2031427167 git add was fixed if unmerged
entries are in the index and core.filemode=false. core.symlinks=false is
a similar case, which touches the same code path. Here is a test that
makes sure that the symlink property in the index is preserved, too.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a merge left unmerged entries, git add failed to pick up the
file mode from the index, when core.filemode == 0. If more than one
unmerged entry is there, the order of stage preference is 2, 1, 3.
Noticed by Johannes Sixt.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function common_prefix() is used to find the common subdirectory of
a couple of pathnames. When checking if the next pathname matches up with
the prefix, it incorrectly checked the whole path, not just the prefix
(including the slash). Thus, the expensive part of the loop was executed
always.
The other bug is more serious: if the first and the last pathname in the
list have a longer common prefix than the common prefix for _all_ pathnames
in the list, the longer one would be chosen. This bug was probably hidden
by the fact that bash's wildcard expansion sorts the results, and the code
just so happens to work with sorted input.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we do not trust executable bit from lstat(2), we copied
existing ce_mode bits without checking if the filesystem object
is a regular file (which is the only thing we apply the "trust
executable bit" business) nor if the blob in the index is a
regular file (otherwise, we should do the same as registering a
new regular file, which is to default non-executable).
Noticed by Johannes Sixt.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When '*.ig' is ignored, and you have two files f.ig and d.ig/foo
in the working tree,
$ git add .
correctly ignored f.ig but failed to ignore d.ig/foo. This was
caused by a thinko in an earlier commit 4888c534, when we tried
to allow adding otherwise ignored files.
After reverting that commit, this takes a much simpler approach.
When we have an unmatched pathspec that talks about an existing
pathname, we know it is an ignored path the user tried to add,
so we include it in the set of paths directory walker returned.
This does not let you say "git add -f D" on an ignored directory
D and add everything under D. People can submit a patch to
further allow it if they want to, but I think it is a saner
behaviour to require explicit paths to be spelled out in such a
case.
Signed-off-by: Junio C Hamano <junkio@cox.net>
An earlier commit f28b34a broke symlinks when trust-executable-bit
is not set because it incorrectly assumed that everything was a
regular file.
Reported by Juergen Ruehle.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This test should be testing update-index --add, not git-add as the
latter is implemented in terms of the former.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user has configured core.filemode=0 then we shouldn't set
the execute bit in the index when adding a new file as the user
has indicated that the local filesystem can't be trusted.
This means that when adding files that should be marked executable
in a repository with core.filemode=0 the user must perform a
'git update-index --chmod=+x' on the file before committing the
addition.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds support to git-add to allow the common -- to separate
command-line options and file names. It adds documentation and a new
git-add test case as well.
[jc: this should apply to 1.2.X maintenance series, so I reworked
git-ls-files --error-unmatch test. ]
Signed-off-by: Junio C Hamano <junkio@cox.net>
Nguyễn Thái Ngọc Duy
Johannes Sixt
Junio C Hamano
Ævar Arnfjörð Bjarmason
Brandon Casey
Jens Lehmann
Chris Packham
Stephen Boyd
Jeff King
Alex Riesen
Kevin Ballard
Stephan Beyer
Alexandre Julliard
Johannes Sixt
Johannes Schindelin
Junio C Hamano
Tom Prince
Shawn Pearce
Carl Worth