Граф коммитов

9 Коммитов

Автор SHA1 Сообщение Дата
Ævar Arnfjörð Bjarmason 1108cea7f8 tests: remove most uses of test_i18ncmp
As a follow-up to d162b25f95 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp
via a simple s/test_i18ncmp/test_cmp/g search-replacement.

I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight
changes between "master" and "seen", as well as the prerequisite
itself due to other changes between "master" and "next/seen" which add
new test_i18ncmp uses.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-02-10 23:48:27 -08:00
Johannes Schindelin cbc75a12f0 t3[5-9]*: adjust the references to the default branch name "main"
This trick was performed via

	$ (cd t &&
	   sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
		-e 's/Master/Main/g' -- t3[5-9]*.sh)

This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-19 15:44:18 -08:00
Johannes Schindelin 334afbc76f tests: mark tests relying on the current default for `init.defaultBranch`
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.

To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in

- all test scripts that contain the keyword `master`,

- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
  initialize the default branch,

- t5560 because it sources `t/t556x_common` which uses `master`,

- t8002 and t8012 because both source `t/annotate-tests.sh` which also
  uses `master`)

This trick was performed by this command:

	$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
	' $(git grep -l master t/t[0-9]*.sh) \
	t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh

After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:

	$ git checkout HEAD -- \
		t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
		t/t1011-read-tree-sparse-checkout.sh \
		t/t1305-config-include.sh t/t1309-early-config.sh \
		t/t1402-check-ref-format.sh t/t1450-fsck.sh \
		t/t2024-checkout-dwim.sh \
		t/t2106-update-index-assume-unchanged.sh \
		t/t3040-subprojects-basic.sh t/t3301-notes.sh \
		t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
		t/t3436-rebase-more-options.sh \
		t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
		t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
		t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
		t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
		t/t5548-push-porcelain.sh \
		t/t5552-skipping-fetch-negotiator.sh \
		t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
		t/t5614-clone-submodules-shallow.sh \
		t/t7508-status.sh t/t7606-merge-custom.sh \
		t/t9302-fast-import-unpack-limit.sh

We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:

	$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
	' t/t980[0167]*.sh t/t9811*.sh

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-19 15:44:17 -08:00
Johannes Sixt e8a1c686ae t3504: do check for conflict marker after failed cherry-pick
The test with disabled rerere should make sure that the cherry-picked
result does not have the conflict replaced with a recorded resolution.

It attempts to do so by ensuring that the file content is _not_ equal
to some other file. That by itself is a very dubious check because just
about every random result of an incomplete cherry-pick would satisfy
the condition.

In this case, the intent was to check that the conflicting file does
_not_ contain the resolved content. But the check actually uses the
wrong reference file, but not the resolved content. Needless to say
that the non-equality is satisfied. And, on top of it, it uses a commit
that does not even touch the file that is checked.

Do check for the expected result, which is content from both sides of
the merge and merge conflicts. (The latter we check for just the
middle separator for brevity.)

As a side-effect, this also removes an incorrect use of test_must_fail.

Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-27 12:56:02 -08:00
Phillip Wood f826fb799e cherry-pick/revert: reject --rerere-autoupdate when continuing
cherry-pick and revert should not accept --[no-]rerere-autoupdate once
they have started.

Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-02 15:16:09 -07:00
Phillip Wood 8d8cb4b047 cherry-pick/revert: remember --rerere-autoupdate
When continuing after conflicts, cherry-pick forgot if the user had specified
'--rerere-autoupdate'.

Redo the cherry-pick rerere tests to check --rerere-autoupdate works
as expected.

Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-02 15:16:09 -07:00
Phillip Wood 6f0e577e46 t3504: use test_commit
Using test_commit is simpler than chaining echo && git add &&
test_tick && commit. Also having tags makes it clearer which commit
is being selecting by reset.

Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-02 15:16:09 -07:00
Jonathan Nieder a48fcd8369 tests: add missing &&
Breaks in a test assertion's && chain can potentially hide
failures from earlier commands in the chain.

Commands intended to fail should be marked with !, test_must_fail, or
test_might_fail.  The examples in this patch do not require that.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-09 11:59:49 -08:00
Abhijit Menon-Sen aa1a0111cc Make cherry-pick use rerere for conflict resolution.
Cherry-picking can be helped by reusing previous confliction
resolution by invoking rerere automatically.

Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11 16:42:49 -07:00