This function's visibility is about to be increased, so give it a more
distinctive name.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change `lock_raw_ref()` and `lock_ref_sha1_basic()` to use
`refs_verify_refname_available()` instead of
`verify_refname_available_dir()`. This means that those callsites now
check for conflicts with all references rather than just packed refs,
but the performance cost shouldn't be significant (and will be
regained later).
These were the last callers of `verify_refname_available_dir()`, so
also delete that (very complicated) function.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It turns out that we can now implement
`refs_verify_refname_available()` based on the other virtual
functions, so there is no need for it to be defined at the backend
level. Instead, define it once in `refs.c` and remove the
`files_backend` definition.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since references under "refs/bisect/" are per-worktree, they have to
be sought in the worktree rather than in the main repository. But
since loose references are found by traversing directories, the
reference iterator won't even get the idea to look for a
"refs/bisect/" directory in the worktree if there is not a directory
with that name in the main repository. Thus `get_ref_dir()` manually
inserts a dir_entry for "refs/bisect/" whenever it reads the entry for
"refs/".
The current code then immediately calls `read_loose_refs()` on that
directory. But since the dir_entry is created with its `incomplete`
flag set, any traversal that gets to this point will read the
directory automatically. So there is no need to call
`read_loose_refs()` explicitly; the lazy mechanism suffices.
And in fact, the attempt to `read_loose_refs()` was broken anyway.
That function needs its `dirname` argument to have a trailing `/`
character, but the invocation here was passing it "refs/bisect"
without a trailing slash. So `read_loose_refs()` would read
`$GIT_DIR/refs/bisect" correctly, but if it found an entry "foo" in
that directory, it would try to read "$GIT_DIR/refs/bisectfoo".
Normally it wouldn't find anything at that path, but the failure was
canceled out because `get_ref_dir()` *also* forgot to reset the
`REF_INCOMPLETE` bit on the dir_entry. So the read was attempted again
when it was accessed, via the lazy mechanism, and this time the read
was done correctly.
This code has been broken since it was first introduced.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A small step towards making files-backend work as a non-main ref store
using the newly added store-aware API.
For the record, `join` and `nm` on refs.o and files-backend.o tell me
that files-backend no longer uses functions that default to
get_main_ref_store().
I'm not yet comfortable at the idea of removing
files_assert_main_repository() (or converting REF_STORE_MAIN to
REF_STORE_WRITE). More staring and testing is required before that can
happen. Well, except peel_ref(). I'm pretty sure that function is safe.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is not meant to cover all existing API. It adds enough to test ref
stores with the new test program test-ref-store, coming soon and to be
used by files-backend.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
files-backend.c is unlearning submodules. Instead of having a specific
check for submodules to see what operation is allowed, files backend
now takes a set of flags at init. Each operation will check if the
required flags is present before performing.
For now we have four flags: read, write and odb access. Main ref store
has all flags, obviously, while submodule stores are read-only and have
access to odb (*).
The "main" flag stays because many functions in the backend calls
frontend ones without a ref store, so these functions always target the
main ref store. Ideally the flag should be gone after ref-store-aware
api is in place and used by backends.
(*) Submodule code needs for_each_ref. Try take REF_STORE_ODB flag
out. At least t3404 would fail. The "have access to odb" in submodule is
a bit hacky since we don't know from he whether add_submodule_odb() has
been called.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
files-backend is now initialized with a $GIT_DIR. Converting a submodule
path to where real submodule gitdir is located is done in get_ref_store().
This gives a slight performance improvement for submodules since we
don't convert submodule path to gitdir at every backend call like
before. We pay that once at ref-store creation.
More cleanup in files_downcast() and files_assert_main_repository()
follows shortly. It's separate to keep noises from this patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_ref_store() will soon be renamed to get_submodule_ref_store().
Together with future get_worktree_ref_store(), the three functions
provide an appropriate ref store for different operation modes. New APIs
will be added to operate directly on ref stores.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given $GIT_DIR and $GIT_COMMON_DIR, files-backend is now in charge of
deciding what goes where (*). The end goal is to pass $GIT_DIR only. A
refs "view" of a linked worktree is a logical ref store that combines
two files backends together.
(*) Not entirely true since strbuf_git_path_submodule() still does path
translation underneath. But that's for another patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep repo-related path handling in one place. This will make it easier
to add submodule/multiworktree support later.
This automatically adds the "if submodule then use the submodule version
of git_path" to other call sites too. But it does not mean those
operations are submodule-ready. Not yet.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep repo-related path handling in one place. This will make it easier
to add submodule/multiworktree support later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes reflog path building consistent, always in the form of
strbuf_git_path(sb, "logs/%s", refname);
It reduces the mental workload a bit in the next patch when that
function call is converted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_path() and friends are going to be killed in files-backend.c in near
future. And because there's a risk with overwriting buffer in
git_path(), let's convert them all to strbuf_git_path(). We'll have
easier time killing/converting strbuf_git_path() then because we won't
have to worry about memory management again.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a no-op patch. It prepares the function so that we can release
resources (to be added later in this function) before we return.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep repo-related path handling in one place. This will make it easier
to add submodule/multiworktree support later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
safe_create_dir() can do adjust_shared_perm() internally, and init-db
has always created 'refs' in shared mode since the beginning,
af6e277c5e (git-init-db: initialize shared repositories with --shared -
2005-12-22). So this code looks like extra adjust_shared_perm calls are
unnecessary.
And they are. But let's see why there are here in the first place.
This code was added in 6fb5acfd8f (refs: add methods to init refs db -
2016-09-04). From the diff alone this looks like a faithful refactored
code from init-db.c. But there is a subtle difference:
Between the safe_create_dir() block and adjust_shared_perm() block in
the old init-db.c, we may copy/recreate directories from the repo
template. So it makes sense that adjust_shared_perm() is re-executed
then to fix potential permission screwups.
After 6fb5acfd8f, refs dirs are created after template is copied. Nobody
will change directory permission again. So the extra adjust_shared_perm()
is redudant. Delete them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's not in the diff context, but files_downcast() is called before this
check. If "refs" is NULL, we would have segfaulted before reaching the
check here. And we should never see NULL refs in backend code (frontend
should have caught it).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Created in 5f3c3a4e6f (files_log_ref_write: new function - 2015-11-10)
but probably never used outside refs-internal.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git update-ref -d" and other operations to delete references did
not leave any entry in HEAD's reflog when the reference being
deleted was the current branch. This is not a problem in practice
because you do not want to delete the branch you are currently on,
but caused renaming of the current branch to something else not to
be logged in a useful way.
* km/delete-ref-reflog-message:
branch: record creation of renamed branch in HEAD's log
rename_ref: replace empty message in HEAD's log
update-ref: pass reflog message to delete_ref()
delete_ref: accept a reflog message argument
Code and design clean-up for the refs API.
* mh/submodule-hash:
read_loose_refs(): read refs using resolve_ref_recursively()
files_ref_store::submodule: use NULL for the main repository
base_ref_store_init(): remove submodule argument
refs: push the submodule attribute down
refs: store submodule ref stores in a hashmap
register_ref_store(): new function
refs: remove some unnecessary handling of submodule == ""
refs: make some ref_store lookup functions private
refs: reorder some function definitions
Deletion of a branch "foo/bar" could remove .git/refs/heads/foo
once there no longer is any other branch whose name begins with
"foo/", but we didn't do so so far. Now we do.
* mh/ref-remove-empty-directory: (23 commits)
files_transaction_commit(): clean up empty directories
try_remove_empty_parents(): teach to remove parents of reflogs, too
try_remove_empty_parents(): don't trash argument contents
try_remove_empty_parents(): rename parameter "name" -> "refname"
delete_ref_loose(): inline function
delete_ref_loose(): derive loose reference path from lock
log_ref_write_1(): inline function
log_ref_setup(): manage the name of the reflog file internally
log_ref_write_1(): don't depend on logfile argument
log_ref_setup(): pass the open file descriptor back to the caller
log_ref_setup(): improve robustness against races
log_ref_setup(): separate code for create vs non-create
log_ref_write(): inline function
rename_tmp_log(): improve error reporting
rename_tmp_log(): use raceproof_create_file()
lock_ref_sha1_basic(): use raceproof_create_file()
lock_ref_sha1_basic(): inline constant
raceproof_create_file(): new function
safe_create_leading_directories(): set errno on SCLD_EXISTS
safe_create_leading_directories_const(): preserve errno
...
The current code for reflog entries uses a lot of hard-coded constants,
making it hard to read and modify. Use parse_oid_hex and two temporary
variables to simplify the code and reduce the use of magic constants.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make each_reflog_ent_fn take two struct object_id pointers instead of
two pointers to unsigned char. Convert the various callbacks to use
struct object_id as well. Also, rename fsck_handle_reflog_sha1 to
fsck_handle_reflog_oid.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Renaming the current branch adds an event to the current branch's log
and to HEAD's log. However, the logged entries differ. The entry in
the branch's log represents the entire renaming operation (the old and
new hash are identical), whereas the entry in HEAD's log represents
the deletion only (the new sha1 is null).
Extend replace_each_worktree_head_symref(), whose only caller is
branch_rename(), to take a reflog message argument. This allows the
creation of the new ref to be recorded in HEAD's log. As a result,
the renaming event is represented by two entries (a deletion and a
creation entry) in HEAD's log.
It's a bit unfortunate that the branch's log and HEAD's log now
represent the renaming event in different ways. Given that the
renaming operation is not atomic, the two-entry form is a more
accurate representation of the operation and is more useful for
debugging purposes if a failure occurs between the deletion and
creation events. It would make sense to move the branch's log to the
two-entry form, but this would involve changes to how the rename is
carried out and to how the update flags and reflogs are processed for
deletions, so it may not be worth the effort.
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the current branch is renamed, the deletion of the old ref is
recorded in HEAD's log with an empty message. Now that delete_ref()
accepts a reflog message, provide a more descriptive message by
passing along the log message that is given to rename_ref().
The next step will be to extend HEAD's log to also include the second
part of the rename, the creation of the new branch.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the current branch is renamed with 'git branch -m/-M' or deleted
with 'git update-ref -m<msg> -d', the event is recorded in HEAD's log
with an empty message. In preparation for adding a more meaningful
message to HEAD's log in these cases, update delete_ref() to take a
message argument and pass it along to ref_transaction_delete().
Modify all callers to pass NULL for the new message argument; no
change in behavior is intended.
Note that this is relevant for HEAD's log but not for the deleted
ref's log, which is currently deleted along with the ref. Even if it
were not, an entry for the deletion wouldn't be present in the deleted
ref's log. files_transaction_commit() writes to the log if
REF_NEEDS_COMMIT or REF_LOG_ONLY are set, but lock_ref_for_update()
doesn't set REF_NEEDS_COMMIT for the deleted ref because REF_DELETING
is set. In contrast, the update for HEAD has REF_LOG_ONLY set by
split_head_update(), resulting in the deletion being logged.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to call read_ref_full() or resolve_gitlink_ref() from
read_loose_refs(), because we already have a ref_store object in hand.
So we can call resolve_ref_recursively() ourselves. Happily, this
unifies the code for the submodule vs. non-submodule cases.
This requires resolve_ref_recursively() to be exposed to the refs
subsystem, though not to non-refs code.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old practice of storing the empty string in this member for the main
repository was a holdover from before 00eebe3 (refs: create a base class
"ref_store" for files_ref_store, 2016-09-04), when the submodule was
stored in a flex array at the end of `struct files_ref_store`. Storing
NULL for this case is more idiomatic and a tiny bit less code.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is another step towards weakening the 1:1 relationship between
ref_stores and submodules.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Push the submodule attribute down from ref_store to files_ref_store.
This is another step towards loosening the 1:1 connection between
ref_stores and submodules.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "core.logAllRefUpdates" that used to be boolean has been
enhanced to take 'always' as well, to record ref updates to refs
other than the ones that are expected to be updated (i.e. branches,
remote-tracking branches and notes).
* cw/log-updates-for-all-refs-really:
doc: add note about ignoring '--no-create-reflog'
update-ref: add test cases for bare repository
refs: add option core.logAllRefUpdates = always
config: add markup to core.logAllRefUpdates doc
When core.logallrefupdates is true, we only create a new reflog for refs
that are under certain well-known hierarchies. The reason is that we
know that some hierarchies (like refs/tags) are not meant to change, and
that unknown hierarchies might not want reflogs at all (e.g., a
hypothetical refs/foo might be meant to change often and drop old
history immediately).
However, sometimes it is useful to override this decision and simply log
for all refs, because the safety and audit trail is more important than
the performance implications of keeping the log around.
This patch introduces a new "always" mode for the core.logallrefupdates
option which will log updates to everything under refs/, regardless
where in the hierarchy it is (we still will not log things like
ORIG_HEAD and FETCH_HEAD, which are known to be transient).
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patch generated by Coccinelle and contrib/coccinelle/object_id.cocci.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When deleting/pruning references, remove any directories that are made
empty by the deletion of loose references or of reflogs. Otherwise such
empty directories can survive forever and accumulate over time. (Even
'pack-refs', which is smart enough to remove the parent directories of
loose references that it prunes, leaves directories that were already
empty.)
And now that files_transaction_commit() takes care of deleting the
parent directories of loose references that it prunes, we don't have to
do that in prune_ref() anymore.
This change would be unwise if the *creation* of these directories could
race with our deletion of them. But the earlier changes in this patch
series made the creation paths robust against races, so now it is safe
to tidy them up more aggressively.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new "flags" parameter that tells the function whether to remove
empty parent directories of the loose reference file, of the reflog
file, or both. The new functionality is not yet used.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's bad manners and surprising and therefore error-prone.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the standard nomenclature.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was hardly doing anything anymore, and had only one caller.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is simpler to derive the path to the file that must be deleted from
"lock->ref_name" than from the lock_file object.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now files_log_ref_write() doesn't do anything beyond call
log_ref_write_1(), so inline the latter into the former.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of writing the name of the reflog file into a strbuf that is
supplied by the caller but not needed there, write it into a local
temporary buffer and remove the strbuf parameter entirely.
And while we're adjusting the function signature, reorder the arguments
to move the input parameters before the output parameters.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's unnecessary to pass a strbuf holding the reflog path up and down
the call stack now that it is hardly needed by the callers. Remove the
places where log_ref_write_1() uses it, in preparation for making it
internal to log_ref_setup().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function will most often be called by log_ref_write_1(), which
wants to append to the reflog file. In that case, it is silly to close
the file only for the caller to reopen it immediately. So, in the case
that the file was opened, pass the open file descriptor back to the
caller.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change log_ref_setup() to use raceproof_create_file() to create the new
logfile. This makes it more robust against a race against another
process that might be trying to clean up empty directories while we are
trying to create a new logfile.
This also means that it will only call create_leading_directories() if
open() fails, which should be a net win. Even in the cases where we are
willing to create a new logfile, it will usually be the case that the
logfile already exists, or if not then that the directory containing the
logfile already exists. In such cases, we will save some work that was
previously done unconditionally.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behavior of this function (especially how it handles errors) is
quite different depending on whether we are willing to create the reflog
vs. whether we are only trying to open an existing reflog. So separate
the code paths.
This also simplifies the next steps.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function doesn't do anything beyond call files_log_ref_write(), so
replace it with the latter at its call sites.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Don't capitalize error strings
* Report true paths of affected files
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Besides shortening the code, this saves an unnecessary call to
safe_create_leading_directories_const() in almost all cases.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of coding the retry loop inline, use raceproof_create_file() to
make lock acquisition safe against directory creation/deletion races.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`lflags` is set a single time then never changed, so just inline it.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A stray symbolic link in $GIT_DIR/refs/ directory could make name
resolution loop forever, which has been corrected.
* jk/ref-symlink-loop:
files_read_raw_ref: prevent infinite retry loops in general
files_read_raw_ref: avoid infinite loop on broken symlinks
Limit the number of retries to 3. That should be adequate to
prevent any races, while preventing the possibility of
infinite loops if the logic fails to handle any other
possible error modes correctly.
After the fix in the previous commit, there's no known way
to trigger an infinite loop, but I did manually verify that
this fixes the test in that commit even when the code change
is not applied.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our ref resolution first runs lstat() on any path we try to
look up, because we want to treat symlinks specially (by
resolving them manually and considering them symrefs). But
if the results of `readlink` do _not_ look like a ref, we
fall through to treating it like a normal file, and just
read the contents of the linked path.
Since fcb7c76 (resolve_ref_unsafe(): close race condition
reading loose refs, 2013-06-19), that "normal file" code
path will stat() the file and if we see ENOENT, will jump
back to the lstat(), thinking we've seen inconsistent
results between the two calls. But for a symbolic ref, this
isn't a race: the lstat() found the symlink, and the stat()
is looking at the path it points to. We end up in an
infinite loop calling lstat() and stat().
We can fix this by avoiding the retry-on-inconsistent jump
when we know that we found a symlink. While we're at it,
let's add a comment explaining why the symlink case gets to
this code in the first place; without that, it is not
obvious that the correct solution isn't to avoid the stat()
code path entirely.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the semantic patch contrib/coccinelle/qsort.cocci to the code
base, replacing calls of qsort(3) with QSORT. The resulting code is
shorter and supports empty arrays with NULL pointers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref-store abstraction was introduced to the refs API so that we
can plug in different backends to store references.
* mh/ref-store: (38 commits)
refs: implement iteration over only per-worktree refs
refs: make lock generic
refs: add method to rename refs
refs: add methods to init refs db
refs: make delete_refs() virtual
refs: add method for initial ref transaction commit
refs: add methods for reflog
refs: add method iterator_begin
files_ref_iterator_begin(): take a ref_store argument
split_symref_update(): add a files_ref_store argument
lock_ref_sha1_basic(): add a files_ref_store argument
lock_ref_for_update(): add a files_ref_store argument
commit_ref_update(): add a files_ref_store argument
lock_raw_ref(): add a files_ref_store argument
repack_without_refs(): add a files_ref_store argument
refs: make peel_ref() virtual
refs: make create_symref() virtual
refs: make pack_refs() virtual
refs: make verify_refname_available() virtual
refs: make read_raw_ref() virtual
...
Alternate refs backends might still use files to store per-worktree
refs. So provide a way to iterate over only the per-worktree references
in a ref_store. The other backend can set up a files ref_store and
iterate using the new DO_FOR_EACH_PER_WORKTREE_ONLY flag when iterating.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of including a files-backend-specific struct ref_lock, change
the generic ref_update struct to include a void pointer that backends
can use for their own arbitrary data.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes the last caller of function get_files_ref_store(), so
remove it.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alternate refs backends might not need the refs/heads directory and so
on, so we make ref db initialization part of the backend.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the file-based backend, delete_refs has some special optimization
to deal with packed refs. In other backends, we might be able to make
ref deletion faster by putting all deletions into a single
transaction. So we need a special backend function for this.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ronnie Sahlberg <rsahlberg@google.com>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the file-based backend, the reflog piggybacks on the ref lock.
Since other backends won't have the same sort of ref lock, ref backends
must also handle reflogs.
Signed-off-by: Ronnie Sahlberg <rsahlberg@google.com>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For now it only supports the main reference store.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reference backends will be able to customize this function to implement
reference reading.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref_recursively() can handle references in arbitrary files
reference stores, so use it to resolve "gitlink" (i.e., submodule)
references. Aside from removing redundant code, this allows submodule
lookups to benefit from the much more robust code that we use for
reading non-submodule references. And, since the code is now agnostic
about reference backends, it will work for any future references
backend (so move its definition to refs.c).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that resolve_packed_ref() can work with an arbitrary
files_ref_store, there is no need to have a separate
resolve_gitlink_packed_ref() function.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move resolve_gitlink_ref() and related functions lower in the file to
avoid the need for forward declarations in the next step.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions currently only work in the main repository, so add an
assert_main_repository() check to each function.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want ref_stores to be polymorphic, so invent a base class of which
files_ref_store is a derived class. For now there is exactly one
ref_store for the main repository and one for any submodules whose
references have been accessed.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a `struct ref_storage_be` to represent types of reference stores. In
OO notation, this is the class, and will soon hold some class
methods (e.g., a factory to create new ref_store instances) and will
also serve as the vtable for ref_store instances of that type.
As yet, the backends cannot do anything.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The greater goal of this patch series is to develop the concept of a
reference store, which is a place that references, their values, and
their reflogs are stored, and to virtualize the reference interface so
that different types of ref_stores can be implemented. We will then, for
example, use ref_store instances to access submodule references and
worktree references.
Currently, we keep a ref_cache for each submodule that has had its
references iterated over. It is a far cry from a ref_store, but they are
stored the way we will want to store ref_stores, and ref_stores will
eventually have to hold the reference caches. So let's treat ref_caches
as embryo ref_stores, and build them out from there.
As the first step, simply rename `ref_cache` to `files_ref_store`, and
rename some functions and attributes correspondingly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, do_submodule_path will attempt locating the .git directory by
using read_gitfile on <path>/.git. If this fails it just assumes the
<path>/.git is actually a git directory.
This is good because it allows for handling submodules which were cloned
in a regular manner first before being added to the superproject.
Unfortunately this fails if the <path> is not actually checked out any
longer, such as by removing the directory.
Fix this by checking if the directory we found is actually a gitdir. In
the case it is not, attempt to lookup the submodule configuration and
find the name of where it is stored in the .git/modules/ directory of
the superproject.
If we can't locate the submodule configuration, this might occur because
for example a submodule gitlink was added but the corresponding
.gitmodules file was not properly updated. A die() here would not be
pleasant to the users of submodule diff formats, so instead, modify
do_submodule_path() to return an error code:
- git_pathdup_submodule() returns NULL when we fail to find a path.
- strbuf_git_path_submodule() propagates the error code to the caller.
Modify the callers of these functions to check the error code and fail
properly. This ensures we don't attempt to use a bad path that doesn't
match the corresponding submodule.
Because this change fixes add_submodule_odb() to work even if the
submodule is not checked out, update the wording of the submodule log
diff format to correctly display that the submodule is "not initialized"
instead of "not checked out"
Add tests to ensure this change works as expected.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The API to iterate over all the refs (i.e. for_each_ref(), etc.)
has been revamped.
* mh/ref-iterators:
for_each_reflog(): reimplement using iterators
dir_iterator: new API for iterating over a directory tree
for_each_reflog(): don't abort for bad references
do_for_each_ref(): reimplement using reference iteration
refs: introduce an iterator interface
ref_resolves_to_object(): new function
entry_resolves_to_object(): rename function from ref_resolves_to_object()
get_ref_cache(): only create an instance if there is a submodule
remote rm: handle symbolic refs correctly
delete_refs(): add a flags argument
refs: use name "prefix" consistently
do_for_each_ref(): move docstring to the header file
refs: remove unnecessary "extern" keywords
Error handling in the codepaths that updates refs has been
improved.
* mh/update-ref-errors:
lock_ref_for_update(): avoid a symref resolution
lock_ref_for_update(): make error handling more uniform
t1404: add more tests of update-ref error handling
t1404: document function test_update_rejected
t1404: remove "prefix" argument to test_update_rejected
t1404: rename file to t1404-update-ref-errors.sh
Further preparatory work on the refs API before the pluggable
backend series can land.
* mh/split-under-lock: (33 commits)
lock_ref_sha1_basic(): only handle REF_NODEREF mode
commit_ref_update(): remove the flags parameter
lock_ref_for_update(): don't resolve symrefs
lock_ref_for_update(): don't re-read non-symbolic references
refs: resolve symbolic refs first
ref_transaction_update(): check refname_is_safe() at a minimum
unlock_ref(): move definition higher in the file
lock_ref_for_update(): new function
add_update(): initialize the whole ref_update
verify_refname_available(): adjust constness in declaration
refs: don't dereference on rename
refs: allow log-only updates
delete_branches(): use resolve_refdup()
ref_transaction_commit(): correctly report close_ref() failure
ref_transaction_create(): disallow recursive pruning
refs: make error messages more consistent
lock_ref_sha1_basic(): remove unneeded local variable
read_raw_ref(): move docstring to header file
read_raw_ref(): improve docstring
read_raw_ref(): rename symref argument to referent
...
Apply the set of semantic patches from contrib/coccinelle to convert
some leftover places using struct object_id's hash member to instead
use the wrapper functions that take struct object_id natively.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we're overwriting a symref with a SHA-1, we need to resolve the value
of the symref (1) to check against update->old_sha1 and (2) to write to
its reflog. However, we've already read the symref itself and know its
referent. So there is no need to read the symref's value through the
symref; we can read the referent directly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To aid the effort, extract a new function, check_old_oid(), and use it
in the two places where the read value of the reference has to be
checked against update->old_sha1.
Update tests to reflect the improvements.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow references with reflogs to be iterated over using a ref_iterator.
The latter is implemented as a files_reflog_iterator, which in turn uses
dir_iterator to read the "logs" directory.
Note that reflog iteration doesn't correctly handle per-worktree
reflogs (either before or after this patch).
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Haggerty
Nguyễn Thái Ngọc Duy
Junio C Hamano
brian m. carlson
Kyle Meyer
Cornelius Weig
René Scharfe
Jeff King
David Turner
Ronnie Sahlberg
Jacob Keller