It wasn't pulling its weight. And we are about to need code similar to
this where no ref_entry is available and with more diverse error
messages. Rather than try to generalize the function, just inline it.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
It wasn't pulling its weight. And in a moment we will need similar
tests that take a refname rather than a ref_entry as parameter, which
would have made entry_matches() even less useful.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
This change wouldn't be worth it by itself, but in a moment we will
use the strbuf for more string juggling.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
The function had a "dir" parameter that was shadowed by a local "dir"
variable within a code block. Use the former in place of the latter.
(This is consistent with "dir"'s use elsewhere in the function.)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Change the comments to a running example of running the function with
refname set to "refs/foo/bar". Add some more explanation of the logic.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Add some tests of reference D/F conflicts (by which I mean the fact
that references like "refs/foo" and "refs/foo/bar" are not allowed to
coexist) in the context of reference transactions.
The test of creating two conflicting references in the same
transaction fails, leaving the transaction half-completed. This will
be fixed later in this patch series.
Please note that the error messages emitted in the case of conflicts
are not very user-friendly. In particular, when the conflicts involve
loose references, then the errors are reported as
error: there are still refs under 'refs/foo'
fatal: Cannot lock the ref 'refs/foo'.
or
error: unable to resolve reference refs/foo/bar: Not a directory
fatal: Cannot lock the ref 'refs/foo/bar'.
This is because lock_ref_sha1_basic() fails while trying to lock the
new reference, before it even gets to the is_refname_available()
check. This situation will also be improved later in this patch
series.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
The 'lock_fd' is the same as 'lk->fd'. No need to store it twice so remove
it.
No functional changes intended.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The overwhelming majority of lines were single space aligned,
except a few ones aligned by tabs. Fix inconsistency by using
single space everywhere.
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'echo -n' is not portable, but this script used it as a way to give
a string followed by a carriage return for progress messages.
Introduce a new helper shell function "progress" and use printf as a
more portable way to do this. As a side effect, this makes it
unnecessary to have a raw CR in our source, which can be munged in
some shells. For example, MsysGit trims CR before executing a shell
script file in order to make it work right on Windows even if it
uses CRLF as linefeeds.
While at it, replace "echo" using printf in debug() and say() to
eliminate the temptation of reintroducing the same bug.
Signed-off-by: Danny Lin <danny0838@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git about a new option, "http.sslCipherList", which permits one to
specify a list of ciphers to use when negotiating SSL connections. The
setting can be overwridden by the GIT_SSL_CIPHER_LIST environment
variable.
Signed-off-by: Lars Kellogg-Stedman <lars@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `verify` and `create` subcommands of the bundle builtin do
not properly verify the command line arguments that have been
passed in. While the `verify` subcommand accepts an arbitrary
amount of ignored arguments the `create` subcommand does not
complain about being passed too few arguments, resulting in a
bogus call to `git rev-list`. Fix these errors by verifying that
the correct amount of arguments has been passed in.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation says that --squash is for 'add', 'merge',
'pull' and 'push', while --squash actually doesn't change
the behavior of 'push'. Correct the documentation.
Signed-off-by: Danny Lin <danny0838@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we built git without curl, we can't actually test against
an http server. In fact, all of the test scripts which
include lib-httpd.sh already perform this check, with one
exception: t5540. For those scripts, this is a noop, and for
t5540, this is a bugfix (it used to fail when built with
NO_CURL, though it could go unnoticed if you had a stale
git-remote-https in your build directory).
Noticed-by: Junio C Hamano <junio@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't offer the "main" 'git credential' command or any of the credential
helpers from contrib/credential/ when completing git commands.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git cat-file' throws an error while trying to print the type or
size of a broken/corrupt object. This is because these objects are
usually of unknown types.
Teach git cat-file a '--allow-unknown-type' option where it prints
the type or size of a broken/corrupt object without throwing
an error.
Modify '-t' and '-s' options to call sha1_object_info_extended()
directly to support the '--allow-unknown-type' option.
Add documentation for 'cat-file --allow-unknown-type'.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
cat-file: add documentation for '--allow-unknown-type' option.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only parse the options if 2 or 3 arguments are specified.
Update 'struct option options[]' to use OPT_CMDMODE rather than
OPT_SET_INT to allow only one mutually exclusive option and avoid the
need for checking number of arguments. This was written by Junio C Hamano,
tested by me.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update sha1_loose_object_info() to optionally allow it to read
from a loose object file of unknown/bogus type; as the function
usually returns the type of the object it read in the form of enum
for known types, add an optional "typename" field to receive the
name of the type in textual form and a flag to indicate the reading
of a loose object file of unknown/bogus type.
Add parse_sha1_header_extended() which acts as a wrapper around
parse_sha1_header() allowing more information to be obtained.
Add unpack_sha1_header_to_strbuf() to unpack sha1 headers of
unknown/corrupt objects which have a unknown sha1 header size to
a strbuf structure. This was written by Junio C Hamano but tested
by me.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Hepled-by: Jeff King <peff@peff.net>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -r -d" mentions "delete remote branch", which should be
"remote-tracking branch".
Signed-off-by: Danny Lin <danny0838@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
home_config_paths() combines distinct functionality already implemented
by expand_user_path() and xdg_config_home(), and it also hard-codes the
path ~/.gitconfig, which makes it unsuitable to use for other home
config file paths. Since its use will just add unnecessary complexity to
the code, remove it.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since home_config_paths() combines distinct functionality already
implemented by expand_user_path() and xdg_config_home(), and hides the
home config file path ~/.gitconfig. Make the code more explicit by
replacing the use of home_config_paths() with expand_user_path() and
xdg_config_home().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since home_config_paths() combines two distinct functionality already
implemented by expand_user_path() and xdg_config_home(), and hides the
home config file path ~/.gitconfig. Make the code more explicit by
replacing the use of home_config_paths() with expand_user_path() and
xdg_config_home().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since only the xdg credentials file path is required, and
home_config_paths() is unable to construct the path ~/.git-credentials,
simplify the code by replacing home_config_paths() with
xdg_config_home().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since only the xdg excludes file path is required, simplify the code by
replacing use of home_config_paths() with xdg_config_home().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since only the xdg attributes file path is required, simplify the code
by using xdg_config_home() instead of home_config_paths().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The XDG base dir spec[1] specifies that configuration files be stored in
a subdirectory in $XDG_CONFIG_HOME. To construct such a configuration
file path, home_config_paths() can be used. However, home_config_paths()
combines distinct functionality:
1. Retrieve the home git config file path ~/.gitconfig
2. Construct the XDG config path of the file specified by `file`.
This function was introduced in commit 21cf3227 ("read (but not write)
from $XDG_CONFIG_HOME/git/config file"). While the intention of the
function was to allow the home directory configuration file path and the
xdg directory configuration file path to be retrieved with one function
call, the hard-coding of the path ~/.gitconfig prevents it from being
used for other configuration files. Furthermore, retrieving a file path
relative to the user's home directory can be done with
expand_user_path(). Hence, it can be seen that home_config_paths()
introduces unnecessary complexity, especially if a user just wants to
retrieve the xdg config file path.
As such, implement a simpler function xdg_config_home() for constructing
the XDG base dir spec configuration file path. This function, together
with expand_user_path(), can replace all uses of home_config_paths().
[1] http://standards.freedesktop.org/basedir-spec/basedir-spec-0.7.html
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Access to objects in repositories that borrow from another one on a
slow NFS server unnecessarily got more expensive due to recent code
becoming more cautious in a naive way not to lose objects to pruning.
* jk/prune-mtime:
sha1_file: only freshen packs once per run
sha1_file: freshen pack objects before loose
reachable: only mark local objects as recent
Teach the codepaths that read .gitignore and .gitattributes files
that these files encoded in UTF-8 may have UTF-8 BOM marker at the
beginning; this makes it in line with what we do for configuration
files already.
* cn/bom-in-gitignore:
attr: skip UTF8 BOM at the beginning of the input file
config: use utf8_bom[] from utf.[ch] in git_parse_source()
utf8-bom: introduce skip_utf8_bom() helper
add_excludes_from_file: clarify the bom skipping logic
dir: allow a BOM at the beginning of exclude files
"git commit --date=now" or anything that relies on approxidate lost
the daylight-saving-time offset.
* jc/epochtime-wo-tz:
parse_date_basic(): let the system handle DST conversion
parse_date_basic(): return early when given a bogus timestamp
The default $HOME/.gitconfig file created upon "git config --global"
that edits it had incorrectly spelled user.name and user.email
entries in it.
* oh/fix-config-default-user-name-section:
config: fix settings in default_user_config template
"git cat-file bl $blob" failed to barf even though there is no
object type that is "bl".
* jk/type-from-string-gently:
type_from_string_gently: make sure length matches
* ld/p4-filetype-detection:
git-p4: fix filetype detection on files opened exclusively
git-p4: small fix for locked-file-move-test
git-p4: fix small bug in locked test scripts
We avoid setting core.worktree when the repository location is the
".git" directory directly at the top level of the working tree, but
the code misdetected the case in which the working tree is at the
root level of the filesystem (which arguably is a silly thing to
do, but still valid).
* jk/init-core-worktree-at-root:
init: don't set core.worktree when initializing /.git
"git show-branch --topics HEAD" (with no other arguments) did not
do anything interesting. Instead, contrast the given revision
against all the local branches by default.
* mh/show-branch-topic:
show-branch: show all local heads when only giving one rev along --topics
The usual "git diff" when seeing a file turning into a directory
showed a patchset to remove the file and create all files in the
directory, but "git diff --no-index" simply refused to work. Also,
when asked to compare a file and a directory, imitate POSIX "diff"
and compare the file with the file with the same name in the
directory, instead of refusing to run.
* jc/diff-no-index-d-f:
diff-no-index: align D/F handling with that of normal Git
diff-no-index: DWIM "diff D F" into "diff D/F F"
Identify parts of the code that knows that we use SHA-1 hash to
name our objects too much, and use (1) symbolic constants instead
of hardcoded 20 as byte count and/or (2) use struct object_id
instead of unsigned char [20] for object names.
* bc/object-id:
apply: convert threeway_stage to object_id
patch-id: convert to use struct object_id
commit: convert parts to struct object_id
diff: convert struct combine_diff_path to object_id
bulk-checkin.c: convert to use struct object_id
zip: use GIT_SHA1_HEXSZ for trailers
archive.c: convert to use struct object_id
bisect.c: convert leaf functions to use struct object_id
define utility functions for object IDs
define a structure for object IDs
To get number of elements in an array git use the ARRAY_SIZE macro
defined as:
#define ARRAY_SIZE(x) (sizeof(x)/sizeof((x)[0]))
The problem with it is a possibility of mistakenly passing to it a
pointer instead an array. The ARRAY_SIZE macro as conventionally
defined does not provide good type-safety and the open-coded
approach is more fragile, more verbose and provides no improvement in
type-safety.
Use instead a different but compatible ARRAY_SIZE() macro,
which will also break compile if you try to
use it on a pointer. This implemention revert to the original code
if the compiler doesn't know the typeof and __builtin_types_compatible_p
GCC extensions.
This can ensure our code is robust to changes, without
needing a gratuitous macro or constant. A similar
ARRAY_SIZE implementation also exists in the linux kernel.
Credits to Rusty Russell and his ccan library.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 01cec54e (daemon: deglobalize hostname information, 2015-03-07)
wrapped the global variables such as hostname inside a struct, it
forgot to convert one location that spelled "hostname" that needs to
be updated to "hi->hostname".
This was inside NO_IPV6 block, and was not caught by anybody.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of d089ebaa (setup: sanitize absolute and funny paths in
get_pathspec(), 2008-01-28), prefix_path() always returns a
newly allocated string, so callers should free its result.
Additionally, drop the const from variables to which the result of
the prefix_path() is assigned, so they can be free()'d without
having to cast-away the constness.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the beginning, write_sha1_file() did not have a way to tell the
caller the name of the object it wrote to the caller. This was
changed in d6d3f9d0 (This implements the new "recursive tree"
write-tree., 2005-04-09) by adding the "returnsha1" parameter to the
function so that the callers who are interested in the value can
optionally pass a pointer to receive it.
It turns out that all callers do want to know the name of the object
it just has written. Nobody passes a NULL to this parameter, hence
it is not necessary to use a separate sha1[] array to receive the
result from write_sha1_file_prepare(), and copy the result to the
returnsha1 supplied by the caller.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-hash-object learned a --literally option in 5ba9a93
(hash-object: add --literally option, 2014-09-11). Check that
--literally allows object creation with a bogus type, with two
type strings whose length is reasonably short and very long.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Haggerty
Stefan Beller
Sébastien Guimmara
Danny Lin
Lars Kellogg-Stedman
Patrick Steinhardt
Junio C Hamano
Jeff King
SZEDER Gábor
Karthik Nayak
Paul Tan
Elia Pinto
Eric Sunshine