This helps to notice when something's going wrong, especially on
systems which lock open files.
I used the following criteria when selecting the code for replacement:
- it was already printing a warning for the unlink failures
- it is in a function which already printing something or is
called from such a function
- it is in a static function, returning void and the function is only
called from a builtin main function (cmd_)
- it is in a function which handles emergency exit (signal handlers)
- it is in a function which is obvously cleaning up the lockfiles
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Example correct diff generated by `diff -M -B' might look like this:
diff --git a/file1 b/file2
similarity index 100%
rename from file1
rename to file2
diff --git a/file2 b/file1
similarity index 100%
rename from file2
rename to file1
Information about removing `file2' comes after information about creation
of new `file2' (renamed from `file1'). Existing implementation isn't able to
apply such patch, because it has to know in advance which files will be
removed.
This patch populates fn_table with information about removal of files
before calling check_patch() for each patch to be applied.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The options "--binary" and "--allow-binary-replacement" of
git-apply are no-op and maintained for backward compatibility,
so avoid to show them in the short help screen.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Swap function argument pair (length, string) into (string, length) to
conform with the commonly used order inside the GIT source code.
Also, add a note about this fact into the coding guidelines.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
User-manual: "git stash <comment>" form is long gone
add test-dump-cache-tree in Makefile
fix typo in Documentation
apply: fix access to an uninitialized mode variable, found by valgrind
Conflicts:
Makefile
* maint-1.6.0:
User-manual: "git stash <comment>" form is long gone
add test-dump-cache-tree in Makefile
fix typo in Documentation
apply: fix access to an uninitialized mode variable, found by valgrind
When 'tpatch' was initialized successfully, st_mode was already taken
from the previous diff. We should not try to override it with data
from an lstat() that was never called.
This is a companion patch to 7a07841(git-apply: handle a patch that
touches the same path more than once better).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
R. Tyler Ballance reported a mysterious transient repository corruption;
after much digging, it turns out that we were not catching and reporting
memory allocation errors from some calls we make to zlib.
This one _just_ wraps things; it doesn't do the "retry on low memory
error" part, at least not yet. It is an independent issue from the
reporting. Some of the errors are expected and passed back to the caller,
but we die when zlib reports it failed to allocate memory for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous "parse-opt"ification broke git-apply reading from the
standard input. "git apply A - C <B" is supposed to read patches from
files A, B and C in this order.
Before "parse-opt"ification, we used be able to:
git apply --stat - --apply <A B
to read the patch from file A, showing only the diffstat, and then read the
patch from file B, showing the diffstat and actually applying it. Even
with this fix we cannot do that anymore, but that is so crazy use case I
do not think anybody sane relied on such a broken behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A git patch that does not change the executable bit records the mode bits
on its "index" line. "git apply" used to interpret this mode exactly the
same way as it interprets the mode recorded on "new mode" line, as the
wish by the patch submitter to set the mode to the one recorded on the
line.
The reason the mode does not agree between the submitter and the receiver
in the first place is because there is _another_ commit that only appears
on one side but not the other since their histories diverged, and that
commit changes the mode. The patch has "index" line but not "new mode"
line because its change is about updating the contents without affecting
the mode. The application of such a patch is an explicit wish by the
submitter to only cherry-pick the commit that updates the contents without
cherry-picking the commit that modifies the mode. Viewed this way, the
current behaviour is problematic, even though the command does warn when
the mode of the path being patched does not match this mode, and a careful
user could detect this inconsistencies between the patch submitter and the
patch receiver.
This changes the semantics of the mode recorded on the "index" line;
instead of interpreting it as the submitter's wish to set the mode to the
recorded value, it merely informs what the mode submitter happened to
have, and the presense of the "index" line is taken as submitter's wish to
keep whatever the mode is on the receiving end.
This is based on the patch originally done by Alexander Potashev with a
minor fix; the tests are mine.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only incompatible change is that the user how have to use '--'
before a patch file if it is named "--build-fake-ancestor=something".
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was already what 'git apply' did in read_old_data(), just export it
as a real function, and make it be more generic.
In particular, this handles the case of the lstat() st_size data not
matching the readlink() return value properly (which apparently happens
at least on NTFS under Linux). But as a result of this you could also
use the new function without even knowing how big the link is going to
be, and it will allocate an appropriately sized buffer.
So we pass in the st_size of the link as just a hint, rather than a
fixed requirement.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/maint-mksnpath:
Fix potentially dangerous uses of mkpath and git_path
Fix mkpath abuse in dwim_ref and dwim_log of sha1_name.c
Add mksnpath which allows you to specify the output buffer
Replace them with mksnpath/git_snpath and a local buffer
for the resulting string.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many call sites use strbuf_init(&foo, 0) to initialize local
strbuf variable "foo" which has not been accessed since its
declaration. These can be replaced with a static initialization
using the STRBUF_INIT macro which is just as readable, saves a
function call, and takes up fewer lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We carefully verify that the input to git-apply is sane,
including cross-checking that the filenames we see in "+++"
headers match what was provided on the command line of "diff
--git". When --directory is used, however, we ended up
comparing the unadorned name to one with the prepended root,
causing us to complain about a mismatch.
We simply need to prepend the root directory, if any, when
pulling the name out of the git header.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
builtin-apply: fix typo leading to stack corruption
git-stash.sh: fix flawed fix of invalid ref handling (commit da65e7c1)
builtin-merge.c: allocate correct amount of memory
Makefile: do not set NEEDS_LIBICONV for Solaris 8
rebase -i: remove leftover debugging
rebase -i: proper prepare-commit-msg hook argument when squashing
This typo led to stack corruption for lines with whitespace fixes
and length > 1024.
Signed-off-by: Imre Deak <imre.deak@gmail.com>
Looks-good-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* bc/master-diff-hunk-header-fix:
Clarify commit error message for unmerged files
Use strchrnul() instead of strchr() plus manual workaround
Use remove_path from dir.c instead of own implementation
Add remove_path: a function to remove as much as possible of a path
git-submodule: Fix "Unable to checkout" for the initial 'update'
Clarify how the user can satisfy stash's 'dirty state' check.
t4018-diff-funcname: test syntax of builtin xfuncname patterns
t4018-diff-funcname: test syntax of builtin xfuncname patterns
make "git remote" report multiple URLs
diff hunk pattern: fix misconverted "\{" tex macro introducers
diff: fix "multiple regexp" semantics to find hunk header comment
diff: use extended regexp to find hunk headers
diff: use extended regexp to find hunk headers
diff.*.xfuncname which uses "extended" regex's for hunk header selection
diff.c: associate a flag with each pattern and use it for compiling regex
diff.c: return pattern entry pointer rather than just the hunk header pattern
Conflicts:
builtin-merge-recursive.c
t/t7201-co.sh
xdiff-interface.h
Besides, it fixes a memleak (builtin-rm.c) and accidental change of
the input const argument (builtin-merge-recursive.c).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This allows --include=pathspec, similar to --exclude=pathspec.
The rule when one or both of these are used is that the include/exclude
patterns are examined in the order they are given on the command line, and
the first match determines if a patch to each path is used or not. Hence:
$ git apply --include='specific.h' --exclude='*.h' <diff
would apply the patch to specific.h header file, but all other patches in
the input file to other header files are ignored. A patch to a path that
does not match any include/exclude pattern is used by default if there is
no include pattern on the command line, and ignored if there is any
include pattern.
This originally came from Joe Perches, but both the design of the
semantics and the implementation have been redone complately.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ho/dashless:
tests: use "git xyzzy" form (t7200 - t9001)
tests: use "git xyzzy" form (t7000 - t7199)
tests: use "git xyzzy" form (t3600 - t6999)
tests: use "git xyzzy" form (t0000 - t3599)
'git foo' program identifies itself without dash in die() messages
Start conforming code to "git subcmd" style
This is a mechanical conversion of all '*.c' files with:
s/((?:die|error|warning)\("git)-(\S+:)/$1 $2/;
The result was manually inspected and no false positive was found.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
User notifications are presented as 'git cmd', and code comments
are presented as '"cmd"' or 'git's cmd', rather than 'git-cmd'.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even after a handfle attempts, match_beginning logic still has corner
cases:
1bf1a85 (apply: treat EOF as proper context., 2006-05-23)
65aadb9 (apply: force matching at the beginning., 2006-05-24)
4be6096 (apply --unidiff-zero: loosen sanity checks ..., 2006-09-17)
ee5a317 (Fix "git apply" to correctly enforce "match ..., 2008-04-06)
This is a tricky piece of code.
We still incorrectly enforce "match_beginning" for -U0 matches.
I noticed this while trying out an example sequence from Clemens Buchacher:
$ echo a >victim
$ git add victim
$ echo b >>victim
$ git diff -U0 >patch
$ cat patch
diff --git i/victim w/victim
index 7898192..422c2b7 100644
--- i/victim
+++ w/victim
@@ -1,0 +2 @@ a
+b
$ git apply --cached --unidiff-zero <patch
$ git show :victim
b
a
The change inserts a new line before the second line, but we insist it to
be applied at the beginning. As the result, the code refuses to apply it
at the original offset, and we end up adding the line at the beginning.
Updates to the test script are by Clemens Buchacher.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name path_list was correct for the first usage of that data structure,
but it really is a general-purpose string list.
$ perl -i -pe 's/path-list/string-list/g' $(git grep -l path-list)
$ perl -i -pe 's/path_list/string_list/g' $(git grep -l path_list)
$ git mv path-list.h string-list.h
$ git mv path-list.c string-list.c
$ perl -i -pe 's/has_path/has_string/g' $(git grep -l has_path)
$ perl -i -pe 's/path/string/g' string-list.[ch]
$ git mv Documentation/technical/api-path-list.txt \
Documentation/technical/api-string-list.txt
$ perl -i -pe 's/strdup_paths/strdup_strings/g' $(git grep -l strdup_paths)
... and then fix all users of string-list to access the member "string"
instead of "path".
Documentation/technical/api-string-list.txt needed some rewrapping, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7ebd52a (Merge branch 'dz/apply-again', 2008-07-01) taught "git-apply" to
grok a (non-git) patch that is a concatenation of separate patches that
touch the same file number of times, by recording the postimage of patch
application of previous round and using it as the preimage for later
rounds.
This "incremental" mode of patch application fundamentally contradicts
with the way git rename/copy patches are designed. When a git patch talks
about a file A getting modified, and a new file B created out of A, like
this:
diff --git a/A b/A
--- a/A
+++ b/A
... change text here ...
diff --git a/A b/B
copy from A
copy to B
--- a/A
+++ b/B
... change text here ...
the second change to produce B does not depend on what is done to A with
the first change in any way. This is explicitly done so for reviewability
of individual patches.
With this commit, we do not look at 'fn_table' that records the postimage
of previous round when applying a patch to produce a new file out of an
existing file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/apply-root:
git-apply --directory: make --root more similar to GNU diff
apply --root: thinkofix.
Teach "git apply" to prepend a prefix with "--root=<root>"
Applying a patch in the directory that is different from what the patch
records is done with --directory option in GNU diff. The --root option we
introduced previously does the same, and we can call it the same way to
give users more familiar feel.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a patch modifies the last line of a file that previously had no
terminating '\n', it looks like
-old text
\ No newline at end of file
+new text
Hence, a '\' line does not signal the end of the hunk. This modifies
'git apply --recount' to take this into account.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The end of a string is string[length-1], not string[length+1].
I pointed it out during the review, but I forgot about it when applying the
patch. This should fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With "git apply --root=<root>", all file names in the patch are prepended
with <root>. If a "-p" value was given, the paths are stripped _before_
prepending <root>.
Wished for by HPA.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/checkdiff:
Fix t4017-diff-retval for white-space from wc
Update sample pre-commit hook to use "diff --check"
diff --check: detect leftover conflict markers
Teach "diff --check" about new blank lines at end
checkdiff: pass diff_options to the callback
check_and_emit_line(): rename and refactor
diff --check: explain why we do not care whether old side is binary
Sometimes, the easiest way to fix up a patch is to edit it directly, even
adding or deleting lines. Now, many people are not as divine as certain
benevolent dictators as to update the hunk headers correctly at the first
try.
So teach the tool to do it for us.
[jc: with tests]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working with a lot of people who backport patches all day long, every
once in a while I get a patch that modifies the same file more than once
inside the same patch. git-apply either fails if the second change relies
on the first change or silently drops the first change if the second change
is independent.
The silent part is the scary scenario for us. Also this behaviour is
different from the patch-utils.
I have modified git-apply to create a table of the filenames of files it
modifies such that if a later patch chunk modifies a file in the table it
will buffer the previously changed file instead of reading the original file
from disk.
Logic has been put in to handle creations/deletions/renames/copies. All the
relevant tests of git-apply succeed.
A new test has been added to cover the cases I addressed.
The fix is relatively straight-forward.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function name was too bland and not explicit enough as to what it is
checking. Split it into two, and call the one that checks if there is a
whitespace breakage "ws_check()", and call the other one that checks and
emits the line after color coding "ws_check_emit()".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alex Riesen
Michał Kiedrowicz
Miklos Vajna
Michele Ballabio
Kjetil Barvik
Junio C Hamano
Johannes Schindelin
Linus Torvalds
Shawn O. Pearce
Brandon Casey
Jeff King
Imre Deak
Dmitry Potapov
Heikki Orsila
Stephan Beyer
Thomas Rast
Don Zickus