* mh/check-attr-relative: (29 commits)
test-path-utils: Add subcommand "prefix_path"
test-path-utils: Add subcommand "absolute_path"
git-check-attr: Normalize paths
git-check-attr: Demonstrate problems with relative paths
git-check-attr: Demonstrate problems with unnormalized paths
git-check-attr: test that no output is written to stderr
Rename git_checkattr() to git_check_attr()
git-check-attr: Fix command-line handling to match docs
git-check-attr: Drive two tests using the same raw data
git-check-attr: Add an --all option to show all attributes
git-check-attr: Error out if no pathnames are specified
git-check-attr: Process command-line args more systematically
git-check-attr: Handle each error separately
git-check-attr: Extract a function error_with_usage()
git-check-attr: Introduce a new variable
git-check-attr: Extract a function output_attr()
Allow querying all attributes on a file
Remove redundant check
Remove redundant call to bootstrap_attr_stack()
Extract a function collect_all_attrs()
...
Suggested by: Junio Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/index-pack:
verify-pack: use index-pack --verify
index-pack: show histogram when emulating "verify-pack -v"
index-pack: start learning to emulate "verify-pack -v"
index-pack: a miniscule refactor
index-pack --verify: read anomalous offsets from v2 idx file
write_idx_file: need_large_offset() helper function
index-pack: --verify
write_idx_file: introduce a struct to hold idx customization options
index-pack: group the delta-base array entries also by type
Conflicts:
builtin/verify-pack.c
cache.h
sha1_file.c
This optimizes the "recency order" (see pack-heuristics.txt in
Documentation/technical/ directory) used to order objects within a
packfile in three ways:
- Commits at the tip of tags are written together, in the hope that
revision traversal done in incremental fetch (which starts by
putting them in a revision queue marked as UNINTERESTING) will see a
better locality of these objects;
- In the original recency order, trees and blobs are intermixed. Write
trees together before blobs, in the hope that this will improve
locality when running pathspec-limited revision traversal, i.e.
"git log paths...";
- When writing blob objects out, write the whole family of blobs that use
the same delta base object together, by starting from the root of the
delta chain, and writing its immediate children in a width-first
manner, in the hope that this will again improve locality when reading
blobs that belong to the same path, which are likely to be deltified
against each other.
I tried various workloads in the Linux kernel repositories (HEAD at
v3.0-rc6-71-g4dd1b49) packed with v1.7.6 and with this patch, counting how
large seeks are needed between adjacent accesses to objects in the pack,
and the result looks promising. The history has 2072052 objects, weighing
some 490MiB.
* Simple commit-only log.
$ git log >/dev/null
There are 254656 commits in total.
v1.7.6 with patch
Total number of access : 258,031 258,032
0.0% percentile : 12 12
10.0% percentile : 259 259
20.0% percentile : 294 294
30.0% percentile : 326 326
40.0% percentile : 363 363
50.0% percentile : 415 415
60.0% percentile : 513 513
70.0% percentile : 857 858
80.0% percentile : 10,434 10,441
90.0% percentile : 91,985 91,996
95.0% percentile : 260,852 260,885
99.0% percentile : 1,150,680 1,152,811
99.9% percentile : 3,148,435 3,148,435
Less than 2MiB seek: 99.70% 99.69%
95% of the pack accesses look at data that is no further than 260kB
from the previous location we accessed. The patch does not change the
order of commit objects very much, and the result is very similar.
* Pathspec-limited log.
$ git log drivers/net >/dev/null
The path is touched by 26551 commits and merges (among 254656 total).
v1.7.6 with patch
Total number of access : 559,511 558,663
0.0% percentile : 0 0
10.0% percentile : 182 167
20.0% percentile : 259 233
30.0% percentile : 357 304
40.0% percentile : 714 485
50.0% percentile : 5,046 3,976
60.0% percentile : 688,671 443,578
70.0% percentile : 319,574,732 110,370,100
80.0% percentile : 361,647,599 123,707,229
90.0% percentile : 393,195,669 128,947,636
95.0% percentile : 405,496,875 131,609,321
99.0% percentile : 412,942,470 133,078,115
99.5% percentile : 413,172,266 133,163,349
99.9% percentile : 413,354,356 133,240,445
Less than 2MiB seek: 61.71% 62.87%
With the current pack heuristics, more than 30% of accesses have to
seek further than 300MB; the updated pack heuristics ensures that less
than 0.1% of accesses have to seek further than 135MB. This is largely
due to the fact that the updated heuristics does not mix blobs and
trees together.
* Blame.
$ git blame drivers/net/ne.c >/dev/null
The path is touched by 34 commits and merges.
v1.7.6 with patch
Total number of access : 178,147 178,166
0.0% percentile : 0 0
10.0% percentile : 142 139
20.0% percentile : 222 194
30.0% percentile : 373 300
40.0% percentile : 1,168 837
50.0% percentile : 11,248 7,334
60.0% percentile : 305,121,284 106,850,130
70.0% percentile : 361,427,854 123,709,715
80.0% percentile : 388,127,343 128,171,047
90.0% percentile : 399,987,762 130,200,707
95.0% percentile : 408,230,673 132,174,308
99.0% percentile : 412,947,017 133,181,160
99.5% percentile : 413,312,798 133,220,425
99.9% percentile : 413,352,366 133,269,051
Less than 2MiB seek: 56.47% 56.83%
The result is very similar to the pathspec-limited log above, which
only looks at the tree objects.
* Packing recent history.
$ (git for-each-ref --format='^%(refname)' refs/tags; echo HEAD) |
git pack-objects --revs --stdout >/dev/null
This should pack data worth 71 commits.
v1.7.6 with patch
Total number of access : 11,511 11,514
0.0% percentile : 0 0
10.0% percentile : 48 47
20.0% percentile : 134 98
30.0% percentile : 332 178
40.0% percentile : 1,386 293
50.0% percentile : 8,030 478
60.0% percentile : 33,676 1,195
70.0% percentile : 147,268 26,216
80.0% percentile : 9,178,662 464,598
90.0% percentile : 67,922,665 965,782
95.0% percentile : 87,773,251 1,226,102
99.0% percentile : 98,011,763 1,932,377
99.5% percentile : 100,074,427 33,642,128
99.9% percentile : 105,336,398 275,772,650
Less than 2MiB seek: 77.09% 99.04%
The long-tail part of the result looks worse with the patch, but
the change helps majority of the access. 99.04% of the accesses
need less than 2MiB of seeking, compared to 77.09% with the current
packing heuristics.
* Index pack.
$ git index-pack -v .git/objects/pack/pack*.pack
v1.7.6 with patch
Total number of access : 2,791,228 2,788,802
0.0% percentile : 9 9
10.0% percentile : 140 89
20.0% percentile : 233 167
30.0% percentile : 322 235
40.0% percentile : 464 310
50.0% percentile : 862 423
60.0% percentile : 2,566 686
70.0% percentile : 25,827 1,498
80.0% percentile : 1,317,862 4,971
90.0% percentile : 11,926,385 119,398
95.0% percentile : 41,304,149 952,519
99.0% percentile : 227,613,070 6,709,650
99.5% percentile : 321,265,121 11,734,871
99.9% percentile : 382,919,785 33,155,191
Less than 2MiB seek: 81.73% 96.92%
As the index-pack command already walks objects in the delta chain
order, writing the blobs out in the delta chain order seems to
drastically improve the locality of access.
Note that a half-a-gigabyte packfile comfortably fits in the buffer cache,
and you would unlikely to see much performance difference on a modern and
reasonably beefy machine with enough memory and local disks. Benchmarking
with cold cache (or over NFS) would be interesting.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The size of objects we read from the repository and data we try to put
into the repository are represented in "unsigned long", so that on larger
architectures we can handle objects that weigh more than 4GB.
But the interface defined in zlib.h to communicate with inflate/deflate
limits avail_in (how many bytes of input are we calling zlib with) and
avail_out (how many bytes of output from zlib are we ready to accept)
fields effectively to 4GB by defining their type to be uInt.
In many places in our code, we allocate a large buffer (e.g. mmap'ing a
large loose object file) and tell zlib its size by assigning the size to
avail_in field of the stream, but that will truncate the high octets of
the real size. The worst part of this story is that we often pass around
z_stream (the state object used by zlib) to keep track of the number of
used bytes in input/output buffer by inspecting these two fields, which
practically limits our callchain to the same 4GB limit.
Wrap z_stream in another structure git_zstream that can express avail_in
and avail_out in unsigned long. For now, just die() when the caller gives
a size that cannot be given to a single zlib call. In later patches in the
series, we would make git_inflate() and git_deflate() internally loop to
give callers an illusion that our "improved" version of zlib interface can
operate on a buffer larger than 4GB in one go.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap deflateInit, deflate, and deflateEnd for everybody, and the sole use
of deflateInit2 in remote-curl.c to tell the library to use gzip header
and trailer in git_deflate_init_gzip().
There is only one caller that cares about the status from deflateEnd().
Introduce git_deflate_end_gently() to let that sole caller retrieve the
status and act on it (i.e. die) for now, but we would probably want to
make inflate_end/deflate_end die when they ran out of memory and get
rid of the _gently() kind.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pack-objects command should take notice of the object file and
refrain from attempting to delta large ones, to be consistent with
the fast-import command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove two globals, pack_idx_default version and pack_idx_off32_limit,
and place them in a pack_idx_option structure. Allow callers to pass
it to write_idx_file() as a parameter.
Adjust all callers to the API change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All files that include this header file use the same four line
incantation:
#ifndef NO_PTHREADS
#include <pthread.h>
#include "thread-utils.h"
#endif
Move the responsibility for that gymnastics to the header file from the
files that include it. This approach makes it easier to later declare new
services that are related to threading in thread-utils.h and have them
available to all the threading code.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/thinner-wrapper:
Remove pack file handling dependency from wrapper.o
pack-objects: mark file-local variable static
wrapper: give zlib wrappers their own translation unit
strbuf: move strbuf_branchname to sha1_name.c
path helpers: move git_mkstemp* to wrapper.c
wrapper: move odb_* to environment.c
wrapper: move xmmap() to sha1_file.c
old_try_to_free_routine is not meant for use from other files.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now, packing valid objects could fail when creating a thin pack
simply because a pack edge object used as a preferred base is corrupted.
Since preferred base objects are not strictly needed to produce a valid
pack, let's not consider the inability to read them as a fatal error.
Delta compression may well be attempted against other objects in the
search window. To avoid warning storms (we are in the inner loop of
the delta search window) a warning is emitted only on the first
occurrence.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it cosistent with other places (including the
git-pack-objects(1) manpage itself) and avoids possible confusion (I,
for one, mistook `<object-list' for a `<object-list>' typo at first when
preparing this series).
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove some stray usage of other bracket types and asterisks for the
same purpose.
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed integer overflow is not defined in C, so do not depend on it.
This fixes a problem with GCC 4.4.0 and -O3 where the optimizer would
consider "consumed_bytes > consumed_bytes + bytes" as a constant
expression, and never execute the die()-call.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/try-to-free-stackable:
Do not call release_pack_memory in malloc wrappers when GIT_TRACE is used
Have set_try_to_free_routine return the previous routine
This shrinks the top-level directory a bit, and makes it much more
pleasant to use auto-completion on the thing. Instead of
[torvalds@nehalem git]$ em buil<tab>
Display all 180 possibilities? (y or n)
[torvalds@nehalem git]$ em builtin-sh
builtin-shortlog.c builtin-show-branch.c builtin-show-ref.c
builtin-shortlog.o builtin-show-branch.o builtin-show-ref.o
[torvalds@nehalem git]$ em builtin-shor<tab>
builtin-shortlog.c builtin-shortlog.o
[torvalds@nehalem git]$ em builtin-shortlog.c
you get
[torvalds@nehalem git]$ em buil<tab> [type]
builtin/ builtin.h
[torvalds@nehalem git]$ em builtin [auto-completes to]
[torvalds@nehalem git]$ em builtin/sh<tab> [type]
shortlog.c shortlog.o show-branch.c show-branch.o show-ref.c show-ref.o
[torvalds@nehalem git]$ em builtin/sho [auto-completes to]
[torvalds@nehalem git]$ em builtin/shor<tab> [type]
shortlog.c shortlog.o
[torvalds@nehalem git]$ em builtin/shortlog.c
which doesn't seem all that different, but not having that annoying
break in "Display all 180 possibilities?" is quite a relief.
NOTE! If you do this in a clean tree (no object files etc), or using an
editor that has auto-completion rules that ignores '*.o' files, you
won't see that annoying 'Display all 180 possibilities?' message - it
will just show the choices instead. I think bash has some cut-off
around 100 choices or something.
So the reason I see this is that I'm using an odd editory, and thus
don't have the rules to cut down on auto-completion. But you can
simulate that by using 'ls' instead, or something similar.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Michael Haggerty
Jonathan Nieder
Nicolas Pitre
Štěpán Němec
Erik Faye-Lund
Johannes Schindelin
Linus Torvalds