24c30e0b6 (wt-status: tolerate dangling marks, 2020-09-01) adds a test
that uses a BRE which breaks at least with OpenBSD's grep.
switch to an ERE as it is done for similar checks and while at it, remove
the now obsolete test_i18ngrep call.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a follow-up to d162b25f95 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp
via a simple s/test_i18ncmp/test_cmp/g search-replacement.
I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight
changes between "master" and "seen", as well as the prerequisite
itself due to other changes between "master" and "next/seen" which add
new test_i18ncmp uses.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Excluding t7817, which is added in an unrelated patch series at the time
of writing, this adjusts t7[5-9]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t7[5-9]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status --short" quoted a path with SP in it when tracked, but
not those that are untracked, ignored or unmerged. They are all
shown quoted consistently.
* jc/quote-path-cleanup:
quote: turn 'nodq' parameter into a set of flags
quote: rename misnamed sq_lookup[] to cq_lookup[]
wt-status: consistently quote paths in "status --short" output
quote_path: code clarification
quote_path: optionally allow quoting a path with SP in it
quote_path: give flags parameter to quote_path()
quote_path: rename quote_path_relative() to quote_path()
Tracked paths with SP in them were cquoted in "git status --short"
output, but untracked, ignored, and unmerged paths weren't.
The test was stolen from a patch to fix output for the 'untracked'
paths by brian m. carlson, with similar tests added for 'ignored'
ones.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" has trouble showing where it came from by interpreting
reflog entries that recordcertain events, e.g. "checkout @{u}", and
gives a hard/fatal error. Even though it inherently is impossible
to give a correct answer because the reflog entries lose some
information (e.g. "@{u}" does not record what branch the user was
on hence which branch 'the upstream' needs to be computed, and even
if the record were available, the relationship between branches may
have changed), at least hide the error to allow "status" show its
output.
* jt/interpret-branch-name-fallback:
wt-status: tolerate dangling marks
refs: move dwim_ref() to header file
sha1-name: replace unsigned int with option struct
When a user checks out the upstream branch of HEAD, the upstream branch
not being a local branch, and then runs "git status", like this:
git clone $URL client
cd client
git checkout @{u}
git status
no status is printed, but instead an error message:
fatal: HEAD does not point to a branch
(This error message when running "git branch" persists even after
checking out other things - it only stops after checking out a branch.)
This is because "git status" reads the reflog when determining the "HEAD
detached" message, and thus attempts to DWIM "@{u}", but that doesn't
work because HEAD no longer points to a branch.
Therefore, when calculating the status of a worktree, tolerate dangling
marks. This is done by adding an additional parameter to
dwim_ref() and repo_dwim_ref().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the ZERO_OID variable to abbreviate the all-zeros object ID for
maintainability and to avoid depending on a specific size for the hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test_must_fail function should only be used for git commands since
we assume that external commands work sanely. Since test_cmp() just
wraps an external command, replace `test_must_fail test_cmp` with
`! test_cmp`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch, there is inconsistency between the status
messages with hints and the ones without hints: there is an
empty line between the title and the file list if hints are
presented, but there isn't one if there are no hints.
This patch remove the inconsistency by removing the empty
lines even if hints are presented.
Signed-off-by: John Lin <johnlinp@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new command "git restore" (together with "git switch") are added
to avoid the confusion of one-command-do-all "git checkout" for new
users. They are also helpful to avoid ambiguous context.
For these reasons, promote it everywhere possible. This includes
documentation, suggestions/advice from other commands.
One nice thing about git-restore is the ability to restore
"everything", so it can be used in "git status" advice instead of both
"git checkout" and "git reset". The three commands suggested by "git
status" are add, rm and restore.
"git checkout" is also removed from "git help" (i.e. it's no longer
considered a commonly used command)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of our tests try to make sure Git behaves sensibly in a
read-only directory, by dropping 'w' permission bit before doing a
test and then restoring it after it is done. The latter is needed
for the test framework to clean after itself without leaving a
leftover directory that cannot be removed.
Ancient parts of tests however arrange the above with
chmod a-w . &&
... do the test ...
status=$?
chmod 775 .
(exit $status)
which obviously would not work if the test somehow dies before it
has the chance to do "chmod 775". Rewrite them by following a more
robust pattern recently written tests use, which is
test_when_finished "chmod 775 ." &&
chmod a-w . &&
... do the test ...
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Compared to 'test-chmtime -v +0 file' which prints the mtime and
and the file name, 'test-chmtime --get file' displays only the mtime.
If it is used in combination with (+|=|=+|=-|-)seconds, it changes
and prints the new value.
test-chmtime -v +0 file | sed 's/[^0-9].*$//'
is now equivalent to:
test-chmtime --get file
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/ui-color-always-to-auto-maint:
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
This script tests the output of status with various formats
when color is enabled. It uses the "always" setting so that
the output is valid even though we capture it in a file.
Using test_terminal gives us a more realistic environment,
and prepares us for the behavior of "always" changing.
Arguably we are testing less than before, since "auto" is
already the default, and we can no longer tell if the config
is actually doing anything.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tools like IDEs or fancy editors may periodically run
commands like "git status" in the background to keep track
of the state of the repository. Some of these commands may
refresh the index and write out the result in an
opportunistic way: if they can get the index lock, then they
update the on-disk index with any updates they find. And if
not, then their in-core refresh is lost and just has to be
recomputed by the next caller.
But taking the index lock may conflict with other operations
in the repository. Especially ones that the user is doing
themselves, which _aren't_ opportunistic. In other words,
"git status" knows how to back off when somebody else is
holding the lock, but other commands don't know that status
would be happy to drop the lock if somebody else wanted it.
There are a couple possible solutions:
1. Have some kind of "pseudo-lock" that allows other
commands to tell status that they want the lock.
This is likely to be complicated and error-prone to
implement (and maybe even impossible with just
dotlocks to work from, as it requires some
inter-process communication).
2. Avoid background runs of commands like "git status"
that want to do opportunistic updates, preferring
instead plumbing like diff-files, etc.
This is awkward for a couple of reasons. One is that
"status --porcelain" reports a lot more about the
repository state than is available from individual
plumbing commands. And two is that we actually _do_
want to see the refreshed index. We just don't want to
take a lock or write out the result. Whereas commands
like diff-files expect us to refresh the index
separately and write it to disk so that they can depend
on the result. But that write is exactly what we're
trying to avoid.
3. Ask "status" not to lock or write the index.
This is easy to implement. The big downside is that any
work done in refreshing the index for such a call is
lost when the process exits. So a background process
may end up re-hashing a changed file multiple times
until the user runs a command that does an index
refresh themselves.
This patch implements the option 3. The idea (and the test)
is largely stolen from a Git for Windows patch by Johannes
Schindelin, 67e5ce7f63 (status: offer *not* to lock the
index and update it, 2016-08-12). The twist here is that
instead of making this an option to "git status", it becomes
a "git" option and matching environment variable.
The reason there is two-fold:
1. An environment variable is carried through to
sub-processes. And whether an invocation is a
background process or not should apply to the whole
process tree. So you could do "git --no-optional-locks
foo", and if "foo" is a script or alias that calls
"status", you'll still get the effect.
2. There may be other programs that want the same
treatment.
I've punted here on finding more callers to convert,
since "status" is the obvious one to call as a repeated
background job. But "git diff"'s opportunistic refresh
of the index may be a good candidate.
The test is taken from 67e5ce7f63, and it's worth repeating
Johannes's explanation:
Note that the regression test added in this commit does
not *really* verify that no index.lock file was written;
that test is not possible in a portable way. Instead, we
verify that .git/index is rewritten *only* when `git
status` is run without `--no-optional-locks`.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" has long shown essentially the same message as "git
commit"; the message it gives while preparing for the root commit,
i.e. "Initial commit", was hard to understand for some new users.
Now it says "No commits yet" to stress more on the current status
(rather than the commit the user is preparing for, which is more in
line with the focus of "git commit").
* ks/status-initial-commit:
status: contextually notify user about an initial commit
The existing message, "Initial commit", makes sense for the commit template
notifying users that it's their initial commit, but is confusing when
merely checking the status of a fresh repository (or orphan branch)
without having any commits yet.
Change the output of "status" to say "No commits yet" when "git
status" is run on a fresh repo (or orphan branch), while retaining the
current "Initial commit" message displayed in the template that's
displayed in the editor when the initial commit is being authored.
Correspondingly change the output of "short status" to "No commits yet
on " when "git status -sb" is run on a fresh repo (or orphan branch).
A few alternatives considered were,
* Waiting for initial commit
* Your current branch does not have any commits
* Current branch waiting for initial commit
The most succint one among the alternatives was chosen.
[with help on tests from Ævar]
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the indentation from "\t " to "\t". This indenting issue was
introduced when the test was added in commit 1d2f393ac9
("status/commit: show staged submodules regardless of ignore
config", 2014-04-05).
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce '--show-stash' and its configuration option 'status.showStash'
to allow git-status to show information about currently stashed entries.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update tests to pass under GETTEXT_POISON (a mechanism to ensure
that output strings that should not be translated are not
translated by mistake), and tell TravisCI to run them.
* ab/fix-poison-tests:
travis-ci: add job to run tests with GETTEXT_POISON
travis-ci: setup "prove cache" in "script" step
tests: fix tests broken under GETTEXT_POISON=YesPlease
The GETTEXT_POISON=YesPlease compile-time testing option added in my
bb946bba76 ("i18n: add GETTEXT_POISON to simulate unfriendly
translator", 2011-02-22) has been slowly bitrotting as strings have
been marked for translation, and new tests have been added without
running it.
I brought this up on the list ("[BUG] test suite broken with
GETTEXT_POISON=YesPlease", [1]) asking whether this mode was useful at
all anymore. At least one person occasionally uses it, and Lars
Schneider offered to change one of the the Travis builds to run in
this mode, so fix up the failing ones.
My test setup runs most of the tests, with the notable exception of
skipping all the p4 tests, so it's possible that there's still some
lurking regressions I haven't fixed.
1. <CACBZZX62+acvi1dpkknadTL827mtCm_QesGSZ=6+UnyeMpg8+Q@mail.gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add color config slots to be used in the status short-format when
displaying local and remote tracking branch information.
[jc: rebased on top of Peff's fix to 'git status' and tweaked the
test to check both local and remote-tracking branch output]
Signed-off-by: Stephen Kent <smkent@smkent.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-status shows tracking data for the current branch
in the long format, we try to end the stanza with a blank
line. When status.displayCommentPrefix is true, we call
color_fprintf_ln() to do so. But when it's false, we call
the enigmatic:
fputs("", s->fp);
which does nothing at all! This is a bug from 7d7d68022
(silence a bunch of format-zero-length warnings,
2014-05-04). Prior to that, we called fprintf_ln() with an
empty string. Switching to fputs() meant we needed to
include the "newline in the string, but we didn't.
So you see:
On branch jk/status-tracking-newline
Your branch is ahead of 'origin/master' by 1 commit.
Changes not staged for commit:
modified: foo
Untracked files:
bar
whereas there should be a blank line before the "Changes not
staged" line.
The fix itself is a one-liner. But we never noticed this
bug because t7508 doesn't exercise the ahead/behind code at
all. So let's configure an upstream during the initial
setup, which means that the code will be exercised as part
of all of the various invocations in that script. This makes
the diff rather noisy, but should give us good coverage.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -N dir/file && git write-tree" produced an incorrect tree
when there are other paths in the same directory that sorts after
"file".
* nd/cache-tree-ita:
cache-tree: do not generate empty trees as a result of all i-t-a subentries
cache-tree.c: fix i-t-a entry skipping directory updates sometimes
test-lib.sh: introduce and use $EMPTY_BLOB
test-lib.sh: introduce and use $EMPTY_TREE
Similar to $EMPTY_TREE this makes it easier to recognize this special
SHA-1 and change hash later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test functions test_i18ncmp and test_i18ngrep pretend success if run
under GETTEXT_POISON. By using those functions to test output which is
correctly marked as translatable, enables one to detect if the strings
newly marked for translation are from plumbing output. If they are
indeed from plumbing, the test would fail, and the string should be
unmarked, since it is not seen by users.
Thus, it is productive to not have false positives when running the test
under GETTEXT_POISON. This commit replaces normal test functions by
their i18n aware variants in use-cases know to be correctly marked for
translation, suppressing false positives.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests have an initial setup step that might fail based
on whether earlier tests in the script have succeeded or
not. Using a trick like "|| true" breaks the &&-chain,
missing earlier failures (and fooling --chain-lint).
We can use test_might_fail in some cases, which is correct
and makes the intent more obvious. We can also use
test_unconfig for unsetting config (and which is more
robust, as well).
The case in t9500 is an oddball. It wants to run cmd1 _or_
cmd2, and does it like:
cmd1 || cmd2 &&
other_stuff
It's not wrong in this case, but it's a bad habit to get
into, because it breaks the &&-chain if used anywhere except
at the beginning of the test (and we use the correct
solution here, putting it inside a block for precedence).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git commit and git status in long format show the diff between HEAD
and the index when given -v. This allows previewing a commit to be made.
They also list tracked files with unstaged changes, but without a diff.
Introduce '-v -v' which shows the diff between the index and the
worktree in addition to the HEAD index diff. This allows a review of unstaged
changes which might be missing from the commit.
In the case of '-v -v', additonal header lines
Changes to be committed:
and
Changes not staged for commit:
are inserted before the diffs, which are equal to those in the status
part; the latter preceded by 50*"-" to make it stick out more.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"status -v" had no test. Include one.
This also requires changing the .gitignore subtests, which is a good thing:
they include testing a .gitignore pattern now.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These files are used to observe the behaviour of the 'status'
command and if there weren't any such observer, the expected
output from 'status' wouldn't even mention them.
Place them in .gitignore to unclutter the output expected by the
tests. An added benefit is that future tests can add such files
that are purely for use by the observer, i.e. the tests themselves,
by naming them as expect-foo and/or output-bar.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule.*.ignore and diff.ignoresubmodules are used to ignore all
submodule changes in "diff" output, but it can be confusing to
apply these configuration values to status and commit.
This is a backward-incompatible change, but should be so in a good
way (aka bugfix).
* jl/status-added-submodule-is-never-ignored:
commit -m: commit staged submodules regardless of ignore config
status/commit: show staged submodules regardless of ignore config
We don't support comment _strings_ (at least not yet). And multi-byte
character encoding could also be misinterpreted.
The test with two commas is updated because it violates this. It's
added with the patch that introduces core.commentChar in eff80a9
(Allow custom "comment char" - 2013-01-16). It's not clear to me _why_
that behavior is wanted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit fixed the problem that the staged but that ignored
submodules did not show up in the status output of the commit command and
weren't committed afterwards either. But when commit doesn't generate the
status output (e.g. when used in a script with '-m') the ignored submodule
will still not be committed. This is because in that case a different code
path is taken which calls index_differs_from() instead of calling the
wt_status functions.
Fix that by calling index_differs_from() from builtin/commit.c with a
diff_options argument value that tells it not ignore any submodule changes
unless the '--ignore-submodules' option is used. Even though this option
isn't yet implemented for cmd_commit() but only for cmd_status() this
prepares cmd_commit() to correctly handle the '--ignore-submodules' option
later. As status and commit share the same ignore_submodule_arg variable
this makes the code more robust against accidental breakage and documents
how to correctly call index_differs_from().
Change the expected result of the test documenting this problem from
failure to success.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently setting submodule.<name>.ignore and/or diff.ignoreSubmodules to
"all" suppresses all output of submodule changes for the diff family,
status and commit. For status and commit this is really confusing, as it
even when the user chooses to record a new commit for an ignored submodule
by adding it manually this change won't show up under the to-be-committed
changes. To add insult to injury, a later "git commit" will error out with
"nothing to commit" when only ignored submodules are staged.
Fix that by making wt_status always print staged submodule changes, no
matter what ignore settings are configured. The only exception is when the
user explicitly uses the "--ignore-submodules=all" command line option, in
that case the submodule output is still suppressed. This also makes "git
commit" work again when only modifications of ignored submodules are
staged, as that command uses the "commitable" member of the wt_status
struct to determine if staged changes are present. But this only happens
when the commit command uses the wt_status* functions to produce status
output for human consumption (when forking an editor or with --dry-run),
in all other cases (e.g. when run in a script with '-m') another code path
is taken which uses index_differs_from() to determine if any changes are
staged which still ignores submodules according to their configuration.
This will be fixed in a follow-up commit.
Change t7508 to reflect this new behavior and add three new tests to show
that a single staged submodule configured to be ignored will be committed
when the status output is generated and won't be if not. Also update the
documentation of the ignore config options accordingly.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of the last commit, we can use "perl" instead of
"$PERL_PATH" when running tests, as the former is now a
function which uses the latter. As the shorter "perl" is
easier on the eyes, let's switch to using it everywhere.
This is not quite a mechanical s/$PERL_PATH/perl/
replacement, though. There are some places where we invoke
perl from a script we generate on the fly, and those scripts
do not have access to our internal shell functions. The
result can be double-checked by running:
ln -s /bin/false bin-wrappers/perl
make test
which continues to pass even after this patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/submodule-status-ignored:
Improve documentation concerning the status.submodulesummary setting
submodule: don't print status output with ignore=all
submodule: fix confusing variable name
List of files in other sections ("Changes to be committed", ...) end with
a blank line. It is not the case with the "Untracked files" and "Ignored
files" sections. The issue become particularly visible after the #-prefix
removal, as the last line (e.g. "nothing added to commit but untracked
files present") seems mixed with the untracked files.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit set status.displayCommentPrefix file-wide in
t7060-wtstatus.sh, t7508-status.sh and t/t7512-status-help.sh to make the
patch small. However, now that status.displayCommentPrefix is not the
default, it is better to disable it in tests so that the most common
situation is also the most tested.
While we're there, move the "cat > expect << EOF" blocks inside the
tests.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically, "git status" needed to prefix each output line with '#' so
that the output could be added as comment to the commit message. This
prefix comment has no real purpose when "git status" is ran from the
command-line, and this may distract users from the real content.
Disable this prefix comment by default, and make it re-activable for
users needing backward compatibility with status.displayCommentPrefix.
Obviously, "git commit" ignores status.displayCommentPrefix and keeps the
comment unconditionnaly when writing to COMMIT_EDITMSG (but not when
writing to stdout for an error message or with --dry-run).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git status prints information for submodules, but it should ignore the status of
those which have submodule.<name>.ignore set to all. Fix it so that it does
properly ignore those which have that setting either in .git/config or in
.gitmodules.
Not ignored are submodules that are added, deleted, or moved (which is
essentially a combination of the first two) because it is not easily possible to
determine the old path once a move has occurred, nor is it easily possible to
detect which adds and deletions are moves and which are not. This also
preserves the previous behavior of always listing modules which are to be
deleted.
Tests are included which verify that this change has no effect on git submodule
summary without the --for-status option.
Signed-off-by: Brian M. Carlson <sandals@crustytoothpaste.net>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent addition of status.branch started affecting what is shown
when "git status --porcelain" is run by mistake. Identify the
configuration items that should be ignored under "--porcelain"
option, introduce a "deferred config" mechanism to keep the values
read from the configuration, and decide what value to use only after
we read both from configuration and command line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people often run 'git status -b'.
The config variable status.branch allows to set it by default.
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carlo Marcelo Arenas Belón
Ævar Arnfjörð Bjarmason
Johannes Schindelin
Junio C Hamano
Jonathan Tan
brian m. carlson
Denton Liu
Elijah Newren
John Lin
Nguyễn Thái Ngọc Duy
Paul-Sebastian Ungureanu
Jeff King
Kaartic Sivaraam
Liam Beguin
Stephen Kent
Vasco Almeida
Michael J Gruber
Jens Lehmann
Jonathan Nieder
Eric Sunshine
Matthieu Moy
Jorge Juan Garcia Garcia