Structure calls as
test_expect_success 'description' '
body
'
Use double quotes for the description if it requires parameter
expansion or contains a single quote.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move cleanup lines that occur after test blocks into
test_when_finished calls within the test bodies. Don't move cleanup
lines that seem to be related to mutiple tests rather than a single
test.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test case redirects stdout and stderr to output files, but,
unlike the other cases of redirection in the t1400 tests, these files
are not examined downstream. Remove the redirection so that the
output is visible when running the tests verbosely.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A group of update-ref tests verifies that logs are created when either
the log file for the ref already exists or core.logAllRefUpdates is
"true". However, when the default for core.logAllRefUpdates was
changed in 0bee59186 (Enable reflogs by default in any repository with
a working directory., 2006-12-14), the setup for the tests was not
updated. As a result, the "logged by touch" tests would pass even if
the log file did not exist (i.e., if "--create-reflog" was removed
from the first "git update-ref" call).
Update the "logged by touch" tests to disable core.logAllRefUpdates
explicitly so that the behavior does not depend on the default value.
While we're here, update the "logged by config" tests to use
test_config() rather than setting core.logAllRefUpdates to "true"
outside of the tests.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few tests share their description with another test. Extend the
descriptions to indicate how the tests differ.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git update-ref -d" and other operations to delete references did
not leave any entry in HEAD's reflog when the reference being
deleted was the current branch. This is not a problem in practice
because you do not want to delete the branch you are currently on,
but caused renaming of the current branch to something else not to
be logged in a useful way.
* km/delete-ref-reflog-message:
branch: record creation of renamed branch in HEAD's log
rename_ref: replace empty message in HEAD's log
update-ref: pass reflog message to delete_ref()
delete_ref: accept a reflog message argument
Deletion of a branch "foo/bar" could remove .git/refs/heads/foo
once there no longer is any other branch whose name begins with
"foo/", but we didn't do so so far. Now we do.
* mh/ref-remove-empty-directory: (23 commits)
files_transaction_commit(): clean up empty directories
try_remove_empty_parents(): teach to remove parents of reflogs, too
try_remove_empty_parents(): don't trash argument contents
try_remove_empty_parents(): rename parameter "name" -> "refname"
delete_ref_loose(): inline function
delete_ref_loose(): derive loose reference path from lock
log_ref_write_1(): inline function
log_ref_setup(): manage the name of the reflog file internally
log_ref_write_1(): don't depend on logfile argument
log_ref_setup(): pass the open file descriptor back to the caller
log_ref_setup(): improve robustness against races
log_ref_setup(): separate code for create vs non-create
log_ref_write(): inline function
rename_tmp_log(): improve error reporting
rename_tmp_log(): use raceproof_create_file()
lock_ref_sha1_basic(): use raceproof_create_file()
lock_ref_sha1_basic(): inline constant
raceproof_create_file(): new function
safe_create_leading_directories(): set errno on SCLD_EXISTS
safe_create_leading_directories_const(): preserve errno
...
Now that delete_ref() accepts a reflog message, pass the user-provided
message to delete_ref() rather than silently dropping it.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default behavior of update-ref to create reflogs differs in
repositories with worktree and bare ones. The existing tests cover only
the behavior of repositories with worktree.
This commit adds tests that assert the correct behavior in bare
repositories for update-ref. Two cases are covered:
- If core.logAllRefUpdates is not set, no reflogs should be created
- If core.logAllRefUpdates is true, reflogs should be created
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When core.logallrefupdates is true, we only create a new reflog for refs
that are under certain well-known hierarchies. The reason is that we
know that some hierarchies (like refs/tags) are not meant to change, and
that unknown hierarchies might not want reflogs at all (e.g., a
hypothetical refs/foo might be meant to change often and drop old
history immediately).
However, sometimes it is useful to override this decision and simply log
for all refs, because the safety and audit trail is more important than
the performance implications of keeping the log around.
This patch introduces a new "always" mode for the core.logallrefupdates
option which will log updates to everything under refs/, regardless
where in the hierarchy it is (we still will not log things like
ORIG_HEAD and FETCH_HEAD, which are known to be transient).
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When deleting/pruning references, remove any directories that are made
empty by the deletion of loose references or of reflogs. Otherwise such
empty directories can survive forever and accumulate over time. (Even
'pack-refs', which is smart enough to remove the parent directories of
loose references that it prunes, leaves directories that were already
empty.)
And now that files_transaction_commit() takes care of deleting the
parent directories of loose references that it prunes, we don't have to
do that in prune_ref() anymore.
This change would be unwise if the *creation* of these directories could
race with our deletion of them. But the earlier changes in this patch
series made the creation paths robust against races, so now it is safe
to tidy them up more aggressively.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further preparatory work on the refs API before the pluggable
backend series can land.
* mh/split-under-lock: (33 commits)
lock_ref_sha1_basic(): only handle REF_NODEREF mode
commit_ref_update(): remove the flags parameter
lock_ref_for_update(): don't resolve symrefs
lock_ref_for_update(): don't re-read non-symbolic references
refs: resolve symbolic refs first
ref_transaction_update(): check refname_is_safe() at a minimum
unlock_ref(): move definition higher in the file
lock_ref_for_update(): new function
add_update(): initialize the whole ref_update
verify_refname_available(): adjust constness in declaration
refs: don't dereference on rename
refs: allow log-only updates
delete_branches(): use resolve_refdup()
ref_transaction_commit(): correctly report close_ref() failure
ref_transaction_create(): disallow recursive pruning
refs: make error messages more consistent
lock_ref_sha1_basic(): remove unneeded local variable
read_raw_ref(): move docstring to header file
read_raw_ref(): improve docstring
read_raw_ref(): rename symref argument to referent
...
The test functions test_i18ncmp and test_i18ngrep pretend success if run
under GETTEXT_POISON. By using those functions to test output which is
correctly marked as translatable, enables one to detect if the strings
newly marked for translation are from plumbing output. If they are
indeed from plumbing, the test would fail, and the string should be
unmarked, since it is not seen by users.
Thus, it is productive to not have false positives when running the test
under GETTEXT_POISON. This commit replaces normal test functions by
their i18n aware variants in use-cases know to be correctly marked for
translation, suppressing false positives.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before committing ref updates, split symbolic ref updates into two
parts: an update to the underlying ref, and a log-only update to the
symbolic ref. This ensures that both references are locked correctly
during the transaction, including while their reflogs are updated.
Similarly, if the reference pointed to by HEAD is modified directly, add
a separate log-only update to HEAD, rather than leaving the job of
updating HEAD's reflog to commit_ref_update(). This change ensures that
HEAD is locked correctly while its reflog is being modified, as well as
being cheaper (HEAD only needs to be resolved once).
This makes use of a new function, lock_raw_ref(), which is analogous to
read_raw_ref(), but acquires a lock on the reference before reading it.
This change still has two problems:
* There are redundant read_ref_full() reference lookups.
* It is still possible to get incorrect reflogs for symbolic references
if there is a concurrent update by another process, since the old_oid
of a symref is determined before the lock on the pointed-to ref is
held.
Both problems will soon be fixed.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
WIP
If the user has asked that a new value be set for a reference, we use
check_refname_format() to verify that the reference name satisfies all
of the rules. But in other cases, at least check that refname_is_safe().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
* Always start error messages with a lower-case letter.
* Always enclose reference names in single quotes.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
We need the place we stick refs for bisects in progress to not be
shared between worktrees. So we make the refs/bisect/ hierarchy
per-worktree.
The is_per_worktree_ref function and associated docs learn that
refs/bisect/ is per-worktree, as does the git_path code in path.c
The ref-packing functions learn that per-worktree refs should not be
packed (since packed-refs is common rather than per-worktree).
Since refs/bisect is per-worktree, logs/refs/bisect should be too.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests that assume how reflogs are represented on the filesystem too
much have been corrected.
* dt/reflog-tests:
tests: remove some direct access to .git/logs
t/t7509: remove unnecessary manipulation of reflog
Alternate refs backends might store reflogs somewhere other than
.git/logs. Change most test code that directly accesses .git/logs to
instead use git reflog commands.
There are still a few tests which need direct access to reflogs: to
check reflog permissions, to manually create reflogs from scratch, to
save/restore reflogs, to check the format of raw reflog data, and to
remove not just reflog contents, but the reflogs themselves. All cases
which don't need direct access have been modified.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the creation of a ref (e.g. stash) with a reflog already in
place. For most refs (e.g. those under refs/heads), this happens
automatically, but for others, we need this option.
Currently, git does this by pre-creating the reflog, but alternate ref
backends might store reflogs somewhere other than .git/logs. Code
that now directly manipulates .git/logs should instead use git
plumbing commands.
I also added --create-reflog to git tag, just for completeness.
In a moment, we will use this argument to make git stash work with
alternate ref backends.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Multi-ref transaction support we merged a few releases ago
unnecessarily kept many file descriptors open, risking to fail with
resource exhaustion. This is for 2.4.x track.
* mh/write-refs-sooner-2.4:
ref_transaction_commit(): fix atomicity and avoid fd exhaustion
ref_transaction_commit(): remove the local flags variable
ref_transaction_commit(): inline call to write_ref_sha1()
rename_ref(): inline calls to write_ref_sha1() from this function
commit_ref_update(): new function, extracted from write_ref_sha1()
write_ref_to_lockfile(): new function, extracted from write_ref_sha1()
t7004: rename ULIMIT test prerequisite to ULIMIT_STACK_SIZE
update-ref: test handling large transactions properly
ref_transaction_commit(): fix atomicity and avoid fd exhaustion
ref_transaction_commit(): remove the local flags variable
ref_transaction_commit(): inline call to write_ref_sha1()
rename_ref(): inline calls to write_ref_sha1() from this function
commit_ref_update(): new function, extracted from write_ref_sha1()
write_ref_to_lockfile(): new function, extracted from write_ref_sha1()
t7004: rename ULIMIT test prerequisite to ULIMIT_STACK_SIZE
update-ref: test handling large transactions properly
Our convention is for error messages to start with a lower-case
letter.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref API did not handle cases where 'refs/heads/xyzzy/frotz' is
removed at the same time as 'refs/heads/xyzzy' is added (or vice
versa) very well.
* mh/ref-directory-file:
reflog_expire(): integrate lock_ref_sha1_basic() errors into ours
ref_transaction_commit(): delete extra "the" from error message
ref_transaction_commit(): provide better error messages
rename_ref(): integrate lock_ref_sha1_basic() errors into ours
lock_ref_sha1_basic(): improve diagnostics for ref D/F conflicts
lock_ref_sha1_basic(): report errors via a "struct strbuf *err"
verify_refname_available(): report errors via a "struct strbuf *err"
verify_refname_available(): rename function
refs: check for D/F conflicts among refs created in a transaction
ref_transaction_commit(): use a string_list for detecting duplicates
is_refname_available(): use dirname in first loop
struct nonmatching_ref_data: store a refname instead of a ref_entry
report_refname_conflict(): inline function
entry_matches(): inline function
is_refname_available(): convert local variable "dirname" to strbuf
is_refname_available(): avoid shadowing "dir" variable
is_refname_available(): revamp the comments
t1404: new tests of ref D/F conflicts within transactions
The old code was roughly
for update in updates:
acquire locks and check old_sha
for update in updates:
if changing value:
write_ref_to_lockfile()
commit_ref_update()
for update in updates:
if deleting value:
unlink()
rewrite packed-refs file
for update in updates:
if reference still locked:
unlock_ref()
This has two problems.
Non-atomic updates
==================
The atomicity of the reference transaction depends on all pre-checks
being done in the first loop, before any changes have started being
committed in the second loop. The problem is that
write_ref_to_lockfile() (previously part of write_ref_sha1()), which
is called from the second loop, contains two more checks:
* It verifies that new_sha1 is a valid object
* If the reference being updated is a branch, it verifies that
new_sha1 points at a commit object (as opposed to a tag, tree, or
blob).
If either of these checks fails, the "transaction" is aborted during
the second loop. But this might happen after some reference updates
have already been permanently committed. In other words, the
all-or-nothing promise of "git update-ref --stdin" could be violated.
So these checks have to be moved to the first loop.
File descriptor exhaustion
==========================
The old code locked all of the references in the first loop, leaving
all of the lockfiles open until later loops. Since we might be
updating a lot of references, this could result in file descriptor
exhaustion.
The solution
============
After this patch, the code looks like
for update in updates:
acquire locks and check old_sha
if changing value:
write_ref_to_lockfile()
else:
close_ref()
for update in updates:
if changing value:
commit_ref_update()
for update in updates:
if deleting value:
unlink()
rewrite packed-refs file
for update in updates:
if reference still locked:
unlock_ref()
This fixes both problems:
1. The pre-checks in write_ref_to_lockfile() are now done in the first
loop, before any changes have been committed. If any of the checks
fails, the whole transaction can now be rolled back correctly.
2. All lockfiles are closed in the first loop immediately after they
are created (either by write_ref_to_lockfile() or by close_ref()).
This means that there is never more than one open lockfile at a
time, preventing file descriptor exhaustion.
To simplify the bookkeeping across loops, add a new REF_NEEDS_COMMIT
bit to update->flags, which keeps track of whether the corresponding
lockfile needs to be committed, as opposed to just unlocked. (Since
"struct ref_update" is internal to the refs module, this change is not
visible to external callers.)
This change fixes two tests in t1400.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we are in the area, let's remove a superfluous definite article
from the error message that is emitted when the reference cannot be
locked. This improves how it reads and makes it a bit shorter.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
If "git update-ref --stdin" was given a "verify" command with no
"<newvalue>" at all (not even zeros), the code was mistakenly setting
have_old=0 (and leaving old_sha1 uninitialized). But this is
incorrect: this command is supposed to verify that the reference
doesn't exist. So in this case we really need old_sha1 to be set to
null_sha1 and have_old to be set to 1.
Moreover, since have_old was being set to zero, *no* check of the old
value was being done, so the new value of the reference was being set
unconditionally to the value in new_sha1. new_sha1, in turn, was set
to null_sha1 in the expectation that that was the old value and it
shouldn't be changed. But because the precondition was not being
checked, the result was that the reference was being deleted
unconditionally.
So, if <oldvalue> is missing, set have_old unconditionally and set
old_sha1 to null_sha1.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two of the tests fail because
verify refs/heads/foo
with no argument (not even zeros) actually *deletes* refs/heads/foo.
This problem will be fixed in the next commit.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no straightforward way to grep for all tests dealing with
invalid refs. Put them in a single test script so it is easy to see
what functionality has not been exercised with bad ref names yet.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a repository gets in a broken state with too much symref nesting,
it cannot be repaired with "git branch -d":
$ git symbolic-ref refs/heads/nonsense refs/heads/nonsense
$ git branch -d nonsense
error: branch 'nonsense' not found.
Worse, "git update-ref --no-deref -d" doesn't work for such repairs
either:
$ git update-ref -d refs/heads/nonsense
error: unable to resolve reference refs/heads/nonsense: Too many levels of symbolic links
Fix both by teaching resolve_ref_unsafe a new RESOLVE_REF_NO_RECURSE
flag and passing it when appropriate.
Callers can still read the value of a symref (for example to print a
message about it) with that flag set --- resolve_ref_unsafe will
resolve one level of symrefs and stop there.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update "update-ref --stdin [-z]" and then introduce a transactional
support for (multi-)reference updates.
* mh/ref-transaction: (27 commits)
ref_transaction_commit(): work with transaction->updates in place
struct ref_update: add a type field
struct ref_update: add a lock field
ref_transaction_commit(): simplify code using temporary variables
struct ref_update: store refname as a FLEX_ARRAY
struct ref_update: rename field "ref_name" to "refname"
refs: remove API function update_refs()
update-ref --stdin: reimplement using reference transactions
refs: add a concept of a reference transaction
update-ref --stdin: harmonize error messages
update-ref --stdin: improve the error message for unexpected EOF
t1400: test one mistake at a time
update-ref --stdin -z: deprecate interpreting the empty string as zeros
update-ref.c: extract a new function, parse_next_sha1()
t1400: test that stdin -z update treats empty <newvalue> as zeros
update-ref --stdin: simplify error messages for missing oldvalues
update-ref --stdin: make error messages more consistent
update-ref --stdin: improve error messages for invalid values
update-ref.c: extract a new function, parse_refname()
parse_cmd_verify(): copy old_sha1 instead of evaluating <oldvalue> twice
...
read_ref_at has its own parsing of the reflog file for no really good reason
so lets change this to use the existing reflog iterators. This removes one
instance where we manually unmarshall the reflog file format.
Remove the now redundant ref_msg function.
Log messages for errors are changed slightly. We no longer print the file
name for the reflog, instead we refer to it as 'Log for ref <refname>'.
This might be a minor useability regression, but I don't really think so, since
experienced users would know where the log is anyway and inexperienced users
would not know what to do about/how to repair 'Log ... has gap ...' anyway.
Adapt the t1400 test to handle the change in log messages.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make (most of) the error messages for invalid input have the same
format [1]:
$COMMAND [SP $REFNAME]: $MESSAGE
Update the tests accordingly.
[1] A few error messages are left with their old form, because
$COMMAND and $REFNAME aren't passed all the way down the call
stack. Maybe those sites should be changed some day, too.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Distinguish this error from the error that an argument is missing for
another reason. Update the tests accordingly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This case wants to test passing a bad refname to the "update" command.
But it also passes too few arguments to "update", which muddles the
situation: which error should be diagnosed? So split this test into
two:
* One that passes too few arguments to update
* One that passes all three arguments to "update", but with a bad
refname.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the original version of this command, for the single case of the
"update" command's <newvalue>, the empty string was interpreted as
being equivalent to 40 "0"s. This shorthand is unnecessary (binary
input will usually be generated programmatically anyway), and it
complicates the parser and the documentation.
So gently deprecate this usage: remove its description from the
documentation and emit a warning if it is found. But for reasons of
backwards compatibility, continue to accept it.
Helped-by: Brad King <brad.king@kitware.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace three functions, update_store_new_sha1(),
update_store_old_sha1(), and parse_next_arg(), with a single function,
parse_next_sha1(). The new function takes care of a whole argument,
including checking whether it is there, converting it to an SHA-1, and
emitting errors on EOF or for invalid values. The return value
indicates whether the argument was present or absent, which requires
a bit of intelligence because absent values are represented
differently depending on whether "-z" was used.
The new interface means that the calling functions, parse_cmd_*(),
don't have to interpret the result differently based on the
line_termination mode that is in effect. It also means that
parse_cmd_create() can distinguish unambiguously between an empty new
value and a zeros new value, which fixes a failure in t1400.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the (slightly inconsistent) status quo; make sure it doesn't
change by accident.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of, for example,
fatal: update refs/heads/master missing [<oldvalue>] NUL
emit
fatal: update refs/heads/master missing <oldvalue>
Update the tests accordingly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old error messages emitted for invalid input sometimes said
"<oldvalue>"/"<newvalue>" and sometimes said "old value"/"new value".
Convert them all to the former. Update the tests accordingly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an invalid value is passed to "update-ref --stdin" as <oldvalue> or
<newvalue>, include the command and the name of the reference at the
beginning of the error message. Update the tests accordingly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously there were no good tests of C-quoted arguments.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old parse_arg(), when fed an argument
"refs/heads/a"master
parsed 'refs/heads/a' off of the front of the argument and considered
itself successful. It was only when parse_next_arg() tried to parse
the *next* argument that a problem was noticed. But in fact, the
definition of the input format requires arguments to be terminated by
SP or NUL, so *this* argument is already erroneous and parse_arg()
should diagnose the problem.
So teach parse_arg() to verify that C-quoted arguments are terminated
correctly. If not, emit a more specific error message.
There is no corresponding error case of a non-C-quoted argument that
is not terminated correctly, because the end of a non-quoted argument
is *by definition* a space or NUL, so there is no way to insert other
junk between the "end" of the argument and the argument terminator.
Adjust the tests to expect the new error message. Add a docstring to
the function, incorporating the comments that were formerly within the
function plus some added information.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old version was passing (among other things)
update SP refs/heads/c NUL NUL 0{40} NUL
to "git update-ref -z --stdin" to test whether the old-value check for
c is working. But the <newvalue> is empty, which is a bit off the
beaten track.
So, to be sure that we are testing what we want to test, provide an
actual <newvalue> on the "update" line.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test
stdin -z create ref fails with zero new value
actually passes an empty new value, not a zero new value. So rename
the test s/zero/empty/, and change the expected error from
fatal: create $c given zero new value
to
fatal: create $c missing <newvalue>
Of course, this makes the test fail now, because although "git
update-ref" tries to distinguish between these two errors, it does not
succeed in this situation. Fixing it is more than a one-liner, so
mark the test test_expect_failure for now. The failure will be fixed
later in this patch series.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend t/t1400-update-ref.sh to cover cases using the --stdin option.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When deleting a ref through a symref (e.g. using 'git update-ref -d HEAD'
to delete refs/heads/master), we would remove the loose ref, but a packed
version of the same ref would remain, the end result being that instead of
deleting refs/heads/master we would appear to reset it to its state as of
the last repack.
This patch fixes the issue, by making sure we pass the correct ref name
when invoking repack_without_ref() from within delete_ref().
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kyle Meyer
Junio C Hamano
Cornelius Weig
Michael Haggerty
Vasco Almeida
David Turner
Stefan Beller
Ronnie Sahlberg
Jonathan Nieder
Aman Gupta
Brad King
Johan Herland