"git add -N dir/file && git write-tree" produced an incorrect tree
when there are other paths in the same directory that sorts after
"file".
* nd/cache-tree-ita:
cache-tree: do not generate empty trees as a result of all i-t-a subentries
cache-tree.c: fix i-t-a entry skipping directory updates sometimes
test-lib.sh: introduce and use $EMPTY_BLOB
test-lib.sh: introduce and use $EMPTY_TREE
Similar to $EMPTY_TREE this makes it easier to recognize this special
SHA-1 and change hash later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test functions test_i18ncmp and test_i18ngrep pretend success if run
under GETTEXT_POISON. By using those functions to test output which is
correctly marked as translatable, enables one to detect if the strings
newly marked for translation are from plumbing output. If they are
indeed from plumbing, the test would fail, and the string should be
unmarked, since it is not seen by users.
Thus, it is productive to not have false positives when running the test
under GETTEXT_POISON. This commit replaces normal test functions by
their i18n aware variants in use-cases know to be correctly marked for
translation, suppressing false positives.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests have an initial setup step that might fail based
on whether earlier tests in the script have succeeded or
not. Using a trick like "|| true" breaks the &&-chain,
missing earlier failures (and fooling --chain-lint).
We can use test_might_fail in some cases, which is correct
and makes the intent more obvious. We can also use
test_unconfig for unsetting config (and which is more
robust, as well).
The case in t9500 is an oddball. It wants to run cmd1 _or_
cmd2, and does it like:
cmd1 || cmd2 &&
other_stuff
It's not wrong in this case, but it's a bad habit to get
into, because it breaks the &&-chain if used anywhere except
at the beginning of the test (and we use the correct
solution here, putting it inside a block for precedence).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git commit and git status in long format show the diff between HEAD
and the index when given -v. This allows previewing a commit to be made.
They also list tracked files with unstaged changes, but without a diff.
Introduce '-v -v' which shows the diff between the index and the
worktree in addition to the HEAD index diff. This allows a review of unstaged
changes which might be missing from the commit.
In the case of '-v -v', additonal header lines
Changes to be committed:
and
Changes not staged for commit:
are inserted before the diffs, which are equal to those in the status
part; the latter preceded by 50*"-" to make it stick out more.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"status -v" had no test. Include one.
This also requires changing the .gitignore subtests, which is a good thing:
they include testing a .gitignore pattern now.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These files are used to observe the behaviour of the 'status'
command and if there weren't any such observer, the expected
output from 'status' wouldn't even mention them.
Place them in .gitignore to unclutter the output expected by the
tests. An added benefit is that future tests can add such files
that are purely for use by the observer, i.e. the tests themselves,
by naming them as expect-foo and/or output-bar.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule.*.ignore and diff.ignoresubmodules are used to ignore all
submodule changes in "diff" output, but it can be confusing to
apply these configuration values to status and commit.
This is a backward-incompatible change, but should be so in a good
way (aka bugfix).
* jl/status-added-submodule-is-never-ignored:
commit -m: commit staged submodules regardless of ignore config
status/commit: show staged submodules regardless of ignore config
We don't support comment _strings_ (at least not yet). And multi-byte
character encoding could also be misinterpreted.
The test with two commas is updated because it violates this. It's
added with the patch that introduces core.commentChar in eff80a9
(Allow custom "comment char" - 2013-01-16). It's not clear to me _why_
that behavior is wanted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit fixed the problem that the staged but that ignored
submodules did not show up in the status output of the commit command and
weren't committed afterwards either. But when commit doesn't generate the
status output (e.g. when used in a script with '-m') the ignored submodule
will still not be committed. This is because in that case a different code
path is taken which calls index_differs_from() instead of calling the
wt_status functions.
Fix that by calling index_differs_from() from builtin/commit.c with a
diff_options argument value that tells it not ignore any submodule changes
unless the '--ignore-submodules' option is used. Even though this option
isn't yet implemented for cmd_commit() but only for cmd_status() this
prepares cmd_commit() to correctly handle the '--ignore-submodules' option
later. As status and commit share the same ignore_submodule_arg variable
this makes the code more robust against accidental breakage and documents
how to correctly call index_differs_from().
Change the expected result of the test documenting this problem from
failure to success.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently setting submodule.<name>.ignore and/or diff.ignoreSubmodules to
"all" suppresses all output of submodule changes for the diff family,
status and commit. For status and commit this is really confusing, as it
even when the user chooses to record a new commit for an ignored submodule
by adding it manually this change won't show up under the to-be-committed
changes. To add insult to injury, a later "git commit" will error out with
"nothing to commit" when only ignored submodules are staged.
Fix that by making wt_status always print staged submodule changes, no
matter what ignore settings are configured. The only exception is when the
user explicitly uses the "--ignore-submodules=all" command line option, in
that case the submodule output is still suppressed. This also makes "git
commit" work again when only modifications of ignored submodules are
staged, as that command uses the "commitable" member of the wt_status
struct to determine if staged changes are present. But this only happens
when the commit command uses the wt_status* functions to produce status
output for human consumption (when forking an editor or with --dry-run),
in all other cases (e.g. when run in a script with '-m') another code path
is taken which uses index_differs_from() to determine if any changes are
staged which still ignores submodules according to their configuration.
This will be fixed in a follow-up commit.
Change t7508 to reflect this new behavior and add three new tests to show
that a single staged submodule configured to be ignored will be committed
when the status output is generated and won't be if not. Also update the
documentation of the ignore config options accordingly.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of the last commit, we can use "perl" instead of
"$PERL_PATH" when running tests, as the former is now a
function which uses the latter. As the shorter "perl" is
easier on the eyes, let's switch to using it everywhere.
This is not quite a mechanical s/$PERL_PATH/perl/
replacement, though. There are some places where we invoke
perl from a script we generate on the fly, and those scripts
do not have access to our internal shell functions. The
result can be double-checked by running:
ln -s /bin/false bin-wrappers/perl
make test
which continues to pass even after this patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/submodule-status-ignored:
Improve documentation concerning the status.submodulesummary setting
submodule: don't print status output with ignore=all
submodule: fix confusing variable name
List of files in other sections ("Changes to be committed", ...) end with
a blank line. It is not the case with the "Untracked files" and "Ignored
files" sections. The issue become particularly visible after the #-prefix
removal, as the last line (e.g. "nothing added to commit but untracked
files present") seems mixed with the untracked files.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit set status.displayCommentPrefix file-wide in
t7060-wtstatus.sh, t7508-status.sh and t/t7512-status-help.sh to make the
patch small. However, now that status.displayCommentPrefix is not the
default, it is better to disable it in tests so that the most common
situation is also the most tested.
While we're there, move the "cat > expect << EOF" blocks inside the
tests.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically, "git status" needed to prefix each output line with '#' so
that the output could be added as comment to the commit message. This
prefix comment has no real purpose when "git status" is ran from the
command-line, and this may distract users from the real content.
Disable this prefix comment by default, and make it re-activable for
users needing backward compatibility with status.displayCommentPrefix.
Obviously, "git commit" ignores status.displayCommentPrefix and keeps the
comment unconditionnaly when writing to COMMIT_EDITMSG (but not when
writing to stdout for an error message or with --dry-run).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git status prints information for submodules, but it should ignore the status of
those which have submodule.<name>.ignore set to all. Fix it so that it does
properly ignore those which have that setting either in .git/config or in
.gitmodules.
Not ignored are submodules that are added, deleted, or moved (which is
essentially a combination of the first two) because it is not easily possible to
determine the old path once a move has occurred, nor is it easily possible to
detect which adds and deletions are moves and which are not. This also
preserves the previous behavior of always listing modules which are to be
deleted.
Tests are included which verify that this change has no effect on git submodule
summary without the --for-status option.
Signed-off-by: Brian M. Carlson <sandals@crustytoothpaste.net>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent addition of status.branch started affecting what is shown
when "git status --porcelain" is run by mistake. Identify the
configuration items that should be ignored under "--porcelain"
option, introduce a "deferred config" mechanism to keep the values
read from the configuration, and decide what value to use only after
we read both from configuration and command line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people often run 'git status -b'.
The config variable status.branch allows to set it by default.
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people always run 'git status -s'.
The configuration variable status.short allows to set it by default.
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bulk-update of the test suite.
* yd/use-test-config-unconfig:
t5520: use test_config to set/unset git config variables (leftover bits)
t7600: use test_config to set/unset git config variables
t7502: remove clear_config
t7502: use test_config to set/unset git config variables
t9500: use test_config to set/unset git config variables
t7508: use test_config to set/unset git config variables
t7500: use test_config to set/unset git config variables
t5541: use test_config to set/unset git config variables
t5520: use test_config to set/unset git config variables
t4202: use test_config/test_unconfig to set/unset git config variables
t4034: use test_config/test_unconfig to set/unset git config variables
t4304: use test_config to set/unset git config variables
t3400: use test_config to set/unset git config variables
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suggest users to look into using--untracked=no option when "git
status" takes too long.
* tb/document-status-u-tradeoff:
status: advise to consider use of -u when read_directory takes too long
git status: document trade-offs in choosing parameters to the -u option
Introduce advice.statusUoption to suggest considering use of -u to
strike different trade-off when it took more than 2 seconds to
enumerate untracked/ignored files.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users do want to write a line that begin with a pound sign, #,
in their commit log message. Many tracking system recognise
a token of #<bugid> form, for example.
The support we offer these use cases is not very friendly to the end
users. They have a choice between
- Don't do it. Avoid such a line by rewrapping or indenting; and
- Use --cleanup=whitespace but remove all the hint lines we add.
Give them a way to set a custom comment char, e.g.
$ git -c core.commentchar="%" commit
so that they do not have to do either of the two workarounds.
[jc: although I started the topic, all the tests and documentation
updates, many of the call sites of the new strbuf_add_commented_*()
functions, and the change to git-submodule.sh scripted Porcelain are
from Ralf.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the i18n-specific test functions in test scripts for diffstat.
This issue was was introduced in v1.7.9-1-g7f814:
7f814 Use correct grammar in diffstat summary line
and been broken under GETTEXT_POISON=YesPlease since.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise it will be split at a space after "Program" when it is set
to "\\Program Files\perl" or something silly like that.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT-BUILD-OPTIONS defines PERL_PATH to be used in the test suite. Only a
few tests already actually use this variable when perl is needed. The
other test just call 'perl' and it might happen that the wrong perl
interpreter is used.
This becomes problematic on Windows, when the perl interpreter that is
compiled and installed on the Windows system is used, because this perl
interpreter might introduce some unexpected LF->CRLF conversions.
This patch makes sure that $PERL_PATH is used everywhere in the test suite
and that the correct perl interpreter is used.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no reason not to, as the user has to explicitly ask
for it, so we are not breaking compatibility by doing so. We
can do this simply by moving the "show_branch" flag into
the wt_status struct. As a bonus, this saves us from passing
it explicitly, simplifying the code.
Signed-off-by: Jeff King <peff@peff.net>
When the "-z" option is given to status, we are supposed to
NUL-terminate each record. However, the "-b" code to show
the tracking branch did not respect this, and always ended
with a newline.
Signed-off-by: Jeff King <peff@peff.net>
Change a i18n-specific comparison in t/t7508-status.sh to use
test_i18ncmp instead. This was introduced in v1.7.6.3~11^2 and has
been broken under GETTEXT_POISON=YesPlease since.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/maint-status-z-to-use-porcelain:
builtin/commit.c: set status_format _after_ option parsing
t7508: demonstrate status's failure to use --porcelain format with -z
Conflicts:
builtin/commit.c
'git status' should use --porcelain output format when -z is given.
It was not doing so since the _effect_ of using -z, namely that
null_termination would be set, was being checked _before_ option parsing
was performed.
So, move the check so that it is performed after option parsing.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git status' is supplied the -z switch, and no output format has been
selected, it is supposed to use the --porcelain format. This does not
happen. Instead, the standard long format is used. Add a test to
demonstrate this failure.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two tests looked for "[Uu]sage" in the output, but we cannot expect the
l10n to use that phrase. Mark them with test_i18ngrep so that in later
versions we can test truly localized versions with the same tests, not
just GETTEXT_POISON that happens to keep the original string in the
output.
Merge a few tests that were artificially split into "do" and "test output
under C_LOCALE_OUTPUT" in the original i18n patches back.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the most common git-status messages. Many tests checked for
these explicitly. Change them to skip under GETTEXT_POISON=YesPlease.
Some of the tests in t7508-status.sh needed to be split up when I
added C_LOCALE_OUTPUT to them, since parts of them affected later
tests (some of which aren't being skipped) indirectly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/git-cmd-h-bypass-setup:
update-index -h: show usage even with corrupt index
merge -h: show usage even with corrupt index
ls-files -h: show usage even with corrupt index
gc -h: show usage even with broken configuration
commit/status -h: show usage even with broken configuration
checkout-index -h: show usage even in an invalid repository
branch -h: show usage even in an invalid repository
Conflicts:
builtin/merge.c
You can tell "git status" to paint the name of the current branch in its
output (the line that says "On branch ...") by setting the configuration
variable color.status.branch; it is by default turned off.
Signed-off-by: Aleksi Aalto <aga@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Older Gits talked about "updating" a file to add its content to the
index, but this terminology is confusing for new users. "to stage" is far
more intuitive and already used in e.g. the "git stage" command name.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" and "git commit" read .git/config and .gitmodules before
parsing options, but there is no reason to access a repository at all
when the caller just wanted to know what arguments are accepted.
[jn: rewrote the log message and added test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixed all places where it was a straightforward change from cd'ing into a
directory and back via "cd .." to a cd inside a subshell.
Found these places with "git grep -w "cd \.\.".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/test-2: (51 commits)
tests: factor HOME=$(pwd) in test-lib.sh
test-lib: use subshell instead of cd $new && .. && cd $old
tests: simplify "missing PREREQ" message
t/t0000-basic.sh: Run the passing TODO test inside its own test-lib
test-lib: Allow overriding of TEST_DIRECTORY
test-lib: Use "$GIT_BUILD_DIR" instead of "$TEST_DIRECTORY"/../
test-lib: Use $TEST_DIRECTORY or $GIT_BUILD_DIR instead of $(pwd) and ../
test: Introduce $GIT_BUILD_DIR
cvs tests: do not touch test CVS repositories shipped with source
t/t9602-cvsimport-branches-tags.sh: Add a PERL prerequisite
t/t9601-cvsimport-vendor-branch.sh: Add a PERL prerequisite
t/t7105-reset-patch.sh: Add a PERL prerequisite
t/t9001-send-email.sh: convert setup code to tests
t/t9001-send-email.sh: change from skip_all=* to prereq skip
t/t9001-send-email.sh: Remove needless PROG=* assignment
t/t9600-cvsimport.sh: change from skip_all=* to prereq skip
lib-patch-mode tests: change from skip_all=* to prereq skip
t/t3701-add-interactive.sh: change from skip_all=* to prereq skip
tests: Move FILEMODE prerequisite to lib-prereq-FILEMODE.sh
t/Makefile: Create test-results dir for smoke target
...
Conflicts:
t/t6035-merge-dir-to-symlink.sh
Some tests depend on not being able to write to files after chmod
-w. This doesn't work when running the tests as root.
Change test-lib.sh to test if this works, and if so it sets a new
SANITY test prerequisite. The tests that use this previously failed
when run under root.
There was already a test for this in t3600-rm.sh, added by Junio C
Hamano in 2283645 in 2006. That check now uses the new SANITY
prerequisite.
Some of this was resurrected from the "Tests in Cygwin" thread in May
2009:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Nguyễn Thái Ngọc Duy
Vasco Almeida
Jeff King
Michael J Gruber
Jens Lehmann
Jonathan Nieder
Eric Sunshine
Matthieu Moy
Brian M. Carlson
Jorge Juan Garcia Garcia
Yann Droneaud
Jiang Xin
Vincent van Ravesteijn
Ævar Arnfjörð Bjarmason
Brandon Casey
Aleksi Aalto