When downloading a list of bundles in "all" mode, Git has no
understanding of the dependencies between the bundles. Git attempts to
unbundle the bundles in some order, but some may not pass the
verify_bundle() step because of missing prerequisites. This is passed as
error messages to the user, even when they eventually succeed in later
attempts after their dependent bundles are unbundled.
Add a new VERIFY_BUNDLE_QUIET flag to verify_bundle() that avoids the
error messages from the missing prerequisite commits. The method still
returns the number of missing prerequisit commits, allowing callers to
unbundle() to notice that the bundle failed to apply.
Use this flag in bundle-uri.c and test that the messages go away for
'git clone --bundle-uri' commands.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The verify_bundle() method has a 'verbose' option, but we will want to
extend this method to have more granular control over its output. First,
replace this 'verbose' option with a new 'flags' option with a single
possible value: VERIFY_BUNDLE_VERBOSE.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The verify_bundle() method checks two things for a bundle's
prerequisites:
1. Are these objects in the object store?
2. Are these objects reachable from our references?
In this second question, multiple uses of verify_bundle() in the same
process can report an invalid bundle even though it is correct. The
reason is due to not clearing all of the commit marks on the commits
previously walked.
The revision walk machinery was first introduced in-process by
fb9a54150d (git-bundle: avoid fork() in verify_bundle(), 2007-02-22).
This implementation used "-1" as the set of flags to clear. The next
meaningful change came in 2b064697a5 (revision traversal: retire
BOUNDARY_SHOW, 2007-03-05), which introduced the PREREQ_MARK flag
instead of a flag normally controlled by the revision-walk machinery.
In 86a0a408b9 (commit: factor out
clear_commit_marks_for_object_array, 2011-10-01), the loop over the
array of commits was replaced with a new
clear_commit_marks_for_object_array(), but simultaneously the "-1" value
was replaced with "ALL_REV_FLAGS", which stopped un-setting the
PREREQ_MARK flag. This means that if multiple commits were marked by the
PREREQ_MARK in a previous run of verify_bundle(), then this loop could
terminate early due to 'i' going to zero:
while (i && (commit = get_revision(&revs)))
if (commit->object.flags & PREREQ_MARK)
i--;
The flag clearing work was changed again in 63647391e6 (bundle: avoid
using the rev_info flag leak_pending, 2017-12-25), but that was only
cosmetic and did not change the behavior.
It may seem that it would be sufficient to add the PREREQ_MARK flag to
the clear_commit_marks() call in its current location. However, we
actually need to do it in the "cleanup:" step, since the first loop
checking "Are these objects in the object store?" might add the
PREREQ_MARK flag to some objects and then terminate without performing a
walk due to one missing object. By clearing the flags in all cases, we
avoid this issue when running verify_bundle() multiple times in the same
process.
Moving this loop to the cleanup step alone would cause a segfault when
running 'git bundle verify' outside of a repository, but this is because
of that error condition using "goto cleanup" when returning is perfectly
safe. Nothing has been initialized at that point, so we can return
immediately without causing any leaks.
This behavior is verified carefully by a test that will be added soon
when Git learns to download bundle lists in a 'git clone --bundle-uri'
command.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug the memory leaks from the trickiest API of all, the revision
walker.
* ab/plug-leak-in-revisions: (27 commits)
revisions API: add a TODO for diff_free(&revs->diffopt)
revisions API: have release_revisions() release "topo_walk_info"
revisions API: have release_revisions() release "date_mode"
revisions API: call diff_free(&revs->pruning) in revisions_release()
revisions API: release "reflog_info" in release revisions()
revisions API: clear "boundary_commits" in release_revisions()
revisions API: have release_revisions() release "prune_data"
revisions API: have release_revisions() release "grep_filter"
revisions API: have release_revisions() release "filter"
revisions API: have release_revisions() release "cmdline"
revisions API: have release_revisions() release "mailmap"
revisions API: have release_revisions() release "commits"
revisions API users: use release_revisions() for "prune_data" users
revisions API users: use release_revisions() with UNLEAK()
revisions API users: use release_revisions() in builtin/log.c
revisions API users: use release_revisions() in http-push.c
revisions API users: add "goto cleanup" for release_revisions()
stash: always have the owner of "stash_info" free it
revisions API users: use release_revisions() needing REV_INFO_INIT
revision.[ch]: document and move code declared around "init"
...
Change the parse_bundle_header() function to be non-static, and rename
it to parse_bundle_header_fd(). The parse_bundle_header() function is
already public, and it's a thin wrapper around this function. This
will be used by code that wants to pass a fd to the bundle API.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use release_revisions() to various users of "struct rev_list" which
need to have their "struct rev_info" zero-initialized before we can
start using it.
For the bundle.c code see the early exit case added in
3bbbe467f2 (bundle verify: error out if called without an object
database, 2019-05-27).
For the relevant bisect.c code see 45b6370812 (bisect: libify
`check_good_are_ancestors_of_bad` and its dependents, 2020-02-17).
For the submodule.c code see the "goto" on "(!left || !right || !sub)"
added in 8e6df65015 (submodule: refactor show_submodule_summary with
helper function, 2016-08-31).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change moved the 'filter' capability to the end of the 'git
bundle verify' output. Now, add the 'object-format' capability to the
output, when it exists.
This change makes 'git bundle verify' output the hash used in all cases,
even if the capability is not in the bundle. This means that v2 bundles
will always output that they use "sha1". This might look noisy to some
users, but it does simplify the implementation and the test strategy for
this feature.
Since 'verify' ends early when a prerequisite commit is missing, we need
to insert this hash message carefully into our expected test output
throughout t6020.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'filter' capability was added in 105c6f14a (bundle: parse filter
capability, 2022-03-09), but was added in a strange place in the 'git
bundle verify' output.
The tests for this show output like the following:
The bundle contains these 2 refs:
<COMMIT1> <REF1>
<COMMIT2> <REF2>
The bundle uses this filter: blob:none
The bundle records a complete history.
This looks very odd if we have a thin bundle that contains boundary
commits instead of a complete history:
The bundle contains these 2 refs:
<COMMIT1> <REF1>
<COMMIT2> <REF2>
The bundle uses this filter: blob:none
The bundle requires these 2 refs:
<COMMIT3>
<COMMIT4>
This separation between tip refs and boundary refs is unfortunate. Move
the filter capability output to the end of the output. Update the
documentation to match.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bundle file format gets extended to allow a partial bundle,
filtered by similar criteria you would give when making a
partial/lazy clone.
* ds/partial-bundles:
clone: fail gracefully when cloning filtered bundle
bundle: unbundle promisor packs
bundle: create filtered bundles
rev-list: move --filter parsing into revision.c
bundle: parse filter capability
list-objects: handle NULL function pointers
MyFirstObjectWalk: update recommended usage
list-objects: consolidate traverse_commit_list[_filtered]
pack-bitmap: drop filter in prepare_bitmap_walk()
pack-objects: use rev.filter when possible
revision: put object filter into struct rev_info
list-objects-filter-options: create copy helper
index-pack: document and test the --promisor option
In order to have a valid pack-file after unbundling a bundle that has
the 'filter' capability, we need to generate a .promisor file. The
bundle does not promise _where_ the objects can be found, but we can
expect that these bundles will be unbundled in repositories with
appropriate promisor remotes that can find those missing objects.
Use the 'git index-pack --promisor=<message>' option to create this
.promisor file. Add "from-bundle" as the message to help anyone diagnose
issues with these promisor packs.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous change allowed Git to parse bundles with the 'filter'
capability. Now, teach Git to create bundles with this option.
Some rearranging of code is required to get the option parsing in the
correct spot. There are now two reasons why we might need capabilities
(a new hash algorithm or an object filter) so that is pulled out into a
place where we can check both at the same time.
The --filter option is parsed as part of setup_revisions(), but it
expected the --objects flag, too. That flag is somewhat implied by 'git
bundle' because it creates a pack-file walking objects, but there is
also a walk that walks the revision range expecting only commits. Make
this parsing work by setting 'revs.tree_objects' and 'revs.blob_objects'
before the call to setup_revisions().
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The v3 bundle format has capabilities, allowing newer versions of Git to
create bundles with newer features. Older versions that do not
understand these new capabilities will fail with a helpful warning.
Create a new capability allowing Git to understand that the contained
pack-file is filtered according to some object filter. Typically, this
filter will be "blob:none" for a blobless partial clone.
This change teaches Git to parse this capability, place its value in the
bundle header, and demonstrate this understanding by adding a message to
'git bundle verify'.
Since we will use gently_parse_list_objects_filter() outside of
list-objects-filter-options.c, make it an external method and move its
API documentation to before its declaration.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a caller to traverse_commit_list() specifies the options for the
--objects flag but does not specify a show_object function pointer, the
result is a segfault. This is currently visible by running 'git bundle
create --objects HEAD'.
We could fix this problem by supplying a no-op callback in
builtin/bundle.c, but that only solves the problem for one builtin,
leaving this segfault open for other callers.
Replace all callers of the show_commit and show_object function pointers
in list-objects.c to call helper functions show_commit() and
show_object() which check that the given context has non-NULL functions
before passing the necessary data. One extra benefit is that it reduces
duplication due to passing ctx->show_data to every caller.
Test that this segfault no longer occurs for 'git bundle'.
Co-authored-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "nr" and "alloc" members of "struct string_list" to use
"size_t" instead of "nr". On some platforms the size of an "unsigned
int" will be smaller than a "size_t", e.g. a 32 bit unsigned v.s. 64
bit unsigned. As "struct string_list" is a generic API we use in a lot
of places this might cause overflows.
As one example: code in "refs.c" keeps track of the number of refs
with a "size_t", and auxiliary code in builtin/remote.c in
get_ref_states() appends those to a "struct string_list".
While we're at it split the "nr" and "alloc" in string-list.h across
two lines, which is the case for most such struct member
declarations (e.g. in "strbuf.h" and "strvec.h").
Changing e.g. "int i" to "size_t i" in run_and_feed_hook() isn't
strictly necessary, and there are a lot more cases where we'll use a
local "int", "unsigned int" etc. variable derived from the "nr" in the
"struct string_list". But in that case as well as
add_wrapped_shortlog_msg() in builtin/shortlog.c we need to adjust the
printf format referring to "nr" anyway, so let's also change the other
variables referring to it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the "flags" parameter was added in be042aff24 (Teach progress
eye-candy to fetch_refs_from_bundle(), 2011-09-18) there's never been
more than the one flag: BUNDLE_VERBOSE.
Let's have the only caller who cares about that pass "-v" itself
instead through new "extra_index_pack_args" parameter. The flexibility
of being able to pass arbitrary arguments to "unbundle" will be used
in a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move away from the "struct ref_list" in bundle.c in favor of the
almost identical string-list.c API.
That API fits this use-case perfectly, but did not exist in its
current form when this code was added in 2e0afafebd (Add git-bundle:
move objects and references by archive, 2007-02-22), with hindsight we
could have used the path-list API, which later got renamed to
string-list. See 8fd2cb4069 (Extract helper bits from
c-merge-recursive work, 2006-07-25)
We need to change "name" to "string" and "oid" to "util" to make this
conversion, but other than that the APIs are pretty much identical for
what bundle.c made use of.
Let's also replace the memset(..,0,...) pattern with a more idiomatic
"INIT" macro, and finally add a *_release() function so to free the
allocated memory.
Before this the add_to_ref_list() would leak memory, now e.g. "bundle
list-heads" reports no memory leaks at all under valgrind.
In the bundle_header_init() function we're using a clever trick to
memcpy() what we'd get from the corresponding
BUNDLE_HEADER_INIT. There is a concurrent series to make use of that
pattern more generally, see [1].
1. https://lore.kernel.org/git/cover-0.5-00000000000-20210701T104855Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for moving away from accessing the OID and name via the
"oid" and "name" slots in a subsequent commit, change the code that
accesses it to use named variables. This makes the subsequent change
smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to create an incremental bundle, we need to pass many arguments
to let git-bundle ignore some already packed commits. It will be more
convenient to pass args via stdin. But the current implementation does
not allow us to do this.
This is because args are parsed twice when creating bundle. The first
time for parsing args is in `compute_and_write_prerequisites()` by
running `git-rev-list` command to write prerequisites in bundle file,
and stdin is consumed in this step if "--stdin" option is provided for
`git-bundle`. Later nothing can be read from stdin when running
`setup_revisions()` in `create_bundle()`.
The solution is to parse args once by removing the entire function
`compute_and_write_prerequisites()` and then calling function
`setup_revisions()`. In order to write prerequisites for bundle, will
call `prepare_revision_walk()` and `traverse_commit_list()`. But after
calling `prepare_revision_walk()`, the object array `revs.pending` is
left empty, and the following steps could not work properly with the
empty object array (`revs.pending`). Therefore, make a copy of `revs`
to `revs_copy` for later use right after calling `setup_revisions()`.
The copy of `revs_copy` is not a deep copy, it shares the same objects
with `revs`. The object array of `revs` has been cleared, but objects
themselves are still kept. Flags of objects may change after calling
`prepare_revision_walk()`, we can use these changed flags without
calling the `git rev-list` command and parsing its output like the
former implementation.
Also add testcases for git bundle in t6020, which read args from stdin.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" has trouble showing where it came from by interpreting
reflog entries that recordcertain events, e.g. "checkout @{u}", and
gives a hard/fatal error. Even though it inherently is impossible
to give a correct answer because the reflog entries lose some
information (e.g. "@{u}" does not record what branch the user was
on hence which branch 'the upstream' needs to be computed, and even
if the record were available, the relationship between branches may
have changed), at least hide the error to allow "status" show its
output.
* jt/interpret-branch-name-fallback:
wt-status: tolerate dangling marks
refs: move dwim_ref() to header file
sha1-name: replace unsigned int with option struct
When a user checks out the upstream branch of HEAD, the upstream branch
not being a local branch, and then runs "git status", like this:
git clone $URL client
cd client
git checkout @{u}
git status
no status is printed, but instead an error message:
fatal: HEAD does not point to a branch
(This error message when running "git branch" persists even after
checking out other things - it only stops after checking out a branch.)
This is because "git status" reads the reflog when determining the "HEAD
detached" message, and thus attempts to DWIM "@{u}", but that doesn't
work because HEAD no longer points to a branch.
Therefore, when calculating the status of a worktree, tolerate dangling
marks. This is done by adding an additional parameter to
dwim_ref() and repo_dwim_ref().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final leg of SHA-256 transition.
* bc/sha-256-part-3: (39 commits)
t: remove test_oid_init in tests
docs: add documentation for extensions.objectFormat
ci: run tests with SHA-256
t: make SHA1 prerequisite depend on default hash
t: allow testing different hash algorithms via environment
t: add test_oid option to select hash algorithm
repository: enable SHA-256 support by default
setup: add support for reading extensions.objectformat
bundle: add new version for use with SHA-256
builtin/verify-pack: implement an --object-format option
http-fetch: set up git directory before parsing pack hashes
t0410: mark test with SHA1 prerequisite
t5308: make test work with SHA-256
t9700: make hash size independent
t9500: ensure that algorithm info is preserved in config
t9350: make hash size independent
t9301: make hash size independent
t9300: use $ZERO_OID instead of hard-coded object ID
t9300: abstract away SHA-1-specific constants
t8011: make hash size independent
...
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently we detect the hash algorithm in use by the length of the
object ID. This is inelegant and prevents us from using a different
hash algorithm that is also 256 bits in length.
Since we cannot extend the v2 format in a backward-compatible way, let's
add a v3 format, which is identical, except for the addition of
capabilities, which are prefixed by an at sign. We add "object-format"
as the only capability and reject unknown capabilities, since we do not
have a network connection and therefore cannot negotiate with the other
side.
For compatibility, default to the v2 format for SHA-1 and require v3
for SHA-256.
In t5510, always use format v3 so we can be sure we produce consistent
results across hash algorithms. Since head -n N lists the top N lines
instead of the Nth line, let's run our output through sed to normalize
it and compare it against a fixed value, which will make sure we get
exactly what we're expecting.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code which split an argv_array call across multiple lines, like:
argv_array_pushl(&args, "one argument",
"another argument", "and more",
NULL);
was recently mechanically renamed to use strvec, which results in
mis-matched indentation like:
strvec_pushl(&args, "one argument",
"another argument", "and more",
NULL);
Let's fix these up to align the arguments with the opening paren. I did
this manually by sifting through the results of:
git jump grep 'strvec_.*,$'
and liberally applying my editor's auto-format. Most of the changes are
of the form shown above, though I also normalized a few that had
originally used a single-tab indentation (rather than our usual style of
aligning with the open paren). I also rewrapped a couple of obvious
cases (e.g., where previously too-long lines became short enough to fit
on one), but I wasn't aggressive about it. In cases broken to three or
more lines, the grouping of arguments is sometimes meaningful, and it
wasn't worth my time or reviewer time to ponder each case individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts remaining files from the first half of the alphabet,
to keep the diff to a manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add '[abcdefghjkl]*'".
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much like with the dumb HTTP transport, there isn't a way to explicitly
specify the hash algorithm when dealing with a bundle, so detect the
algorithm based on the length of the object IDs in the prerequisites and
ref advertisements.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support the progress output options from pack-objects in git-bundle's
create subcommand. Most notably, this provides --quiet as requested on
the git mailing list per [1]
Reference: https://www.mail-archive.com/git@vger.kernel.org/msg182844.html <robbat2-20190806T191156-796782357Z@orbis-terrarum.net>
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch a use of the constant 40 and a use of GIT_SHA1_HEXSZ to use
the_hash_algo instead.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The deal with bundles is: they really are thin packs, with very little
sugar on top. So we really need a repository (or more appropriately, an
object database) to work with, when asked to verify a bundle.
Let's error out with a useful error message if `git bundle verify` is
called without such an object database to work with.
Reported by Konstantin Ryabitsev.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to pass a header struct to create_bundle(); it writes
the header information directly to a descriptor (and does not report
back details to the caller).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git bundle" aborts due to an empty commit ranges
(i.e. resulting in an empty pack), it left a file descriptor to an
lockfile open, which resulted in leftover lockfile on Windows where
you cannot remove a file with an open file descriptor. This has
been corrected.
* jk/close-duped-fd-before-unlock-for-bundle:
bundle: dup() output descriptor closer to point-of-use
When writing a bundle to a file, the bundle code actually creates
"your.bundle.lock" using our lockfile interface. We feed that output
descriptor to a child git-pack-objects via run-command, which has the
quirk that it closes the output descriptor in the parent.
To avoid confusing the lockfile code (which still thinks the descriptor
is valid), we dup() it, and operate on the duplicate.
However, this has a confusing side effect: after the dup() but before we
call pack-objects, we have _two_ descriptors open to the lockfile. If we
call die() during that time, the lockfile code will try to clean up the
partially-written file. It knows to close() the file before unlinking,
since on some platforms (i.e., Windows) the open file would block the
deletion. But it doesn't know about the duplicate descriptor. On
Windows, triggering an error at the right part of the code will result
in the cleanup failing and the lockfile being left in the filesystem.
We can solve this by moving the dup() much closer to start_command(),
shrinking the window in which we have the second descriptor open. It's
easy to place this in such a way that no die() is possible. We could
still die due to a signal in the exact wrong moment, but we already
tolerate races there (e.g., a signal could come before we manage to put
the file on the cleanup list in the first place).
As a bonus, this shields create_bundle() itself from the duplicate-fd
trick, and we can simplify its error handling (note that the lock
rollback now happens unconditionally, but that's OK; it's a noop if we
didn't open the lock in the first place).
The included test uses an empty bundle to cause a failure at the right
spot in the code, because that's easy to trigger (the other likely
errors are write() problems like ENOSPC). Note that it would already
pass on non-Windows systems (because they are happy to unlink an
already-open file).
Based-on-a-patch-by: Gaël Lhez <gael.lhez@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
This is the flip side of the previous two patches: checking
for a non-zero oidcmp() can be more strictly expressed as
inequality. Like those patches, we write "!= 0" in the
coccinelle transformation, which covers by isomorphism the
more common:
if (oidcmp(E1, E2))
As with the previous two patches, this patch can be achieved
almost entirely by running "make coccicheck"; the only
differences are manual line-wrap fixes to match the original
code.
There is one thing to note for anybody replicating this,
though: coccinelle 1.0.4 seems to miss the case in
builtin/tag.c, even though it's basically the same as all
the others. Running with 1.0.7 does catch this, so
presumably it's just a coccinelle bug that was fixed in the
interim.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_commit_reference
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of
lookup_commit_reference_gently to be more specific about which
repository to handle. This is a small mechanical change; it doesn't
change the implementation to handle repositories other than
the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of parse_object
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up to adjust to a more recent lockfile API convention that
allows lockfile instances kept on the stack.
* ma/lockfile-cleanup:
lock_file: move static locks into functions
lock_file: make function-local locks non-static
refs.c: do not die if locking fails in `delete_pseudoref()`
refs.c: do not die if locking fails in `write_pseudoref()`
t/helper/test-write-cache: clean up lock-handling
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Placing `struct lock_file`s on the stack used to be a bad idea, because
the temp- and lockfile-machinery would keep a pointer into the struct.
But after 076aa2cbd (tempfile: auto-allocate tempfiles on heap,
2017-09-05), we can safely have lockfiles on the stack. (This applies
even if a user returns early, leaving a locked lock behind.)
These `struct lock_file`s are local to their respective functions and we
can drop their staticness.
For good measure, I have inspected these sites and come to believe that
they always release the lock, with the possible exception of bailing out
using `die()` or `exit()` or by returning from a `cmd_foo()`.
As pointed out by Jeff King, it would be bad if someone held on to a
`struct lock_file *` for some reason. After some grepping, I agree with
his findings: no-one appears to be doing that.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert read_sha1_file to take a pointer to struct object_id and rename
it read_object_file. Do the same for read_sha1_file_extended.
Convert one use in grep.c to use the new function without any other code
change, since the pointer being passed is a void pointer that is already
initialized with a pointer to struct object_id. Update the declaration
and definitions of the modified functions, and apply the following
semantic patch to convert the remaining callers:
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1.hash, E2, E3)
+ read_object_file(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1->hash, E2, E3)
+ read_object_file(E1, E2, E3)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1.hash, E2, E3, E4)
+ read_object_file_extended(&E1, E2, E3, E4)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1->hash, E2, E3, E4)
+ read_object_file_extended(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
API clean-up around revision traversal.
* rs/lose-leak-pending:
commit: remove unused function clear_commit_marks_for_object_array()
revision: remove the unused flag leak_pending
checkout: avoid using the rev_info flag leak_pending
bundle: avoid using the rev_info flag leak_pending
bisect: avoid using the rev_info flag leak_pending
object: add clear_commit_marks_all()
ref-filter: use clear_commit_marks_many() in do_merge_filter()
commit: use clear_commit_marks_many() in remove_redundant()
commit: avoid allocation in clear_commit_marks_many()
The leak_pending flag is so awkward to use that multiple comments had to
be added around each occurrence. We use it for remembering the
prerequisites for the bundle. That is easy, though: We have the
ref_list named "prerequisites" in the header for just that purpose.
Use this original list of prerequisites to check if all of them are
present and to clear their commit marks afterward. The two new loops
are intentionally kept similar to the first one in the function.
Calling parse_object() a second time is expected be quick and successful
in each case -- any errors should have been handled in the first round.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the callers of these functions just pass the hash member of a
struct object_id, so convert them to use a pointer to struct object_id
directly. Insert a check for NULL in expand_ref on a temporary basis;
this check can be removed when resolve_ref_unsafe is converted as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All but two of the call sites already have parameters using the hash
parameter of struct object_id, so convert them to take a pointer to the
struct directly. Also convert refs_read_refs_full, the underlying
implementation.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee
Junio C Hamano
Ævar Arnfjörð Bjarmason
Jiang Xin
Jonathan Tan
Jeff King
brian m. carlson
Robin H. Johnson
Johannes Schindelin
Nguyễn Thái Ngọc Duy
Stefan Beller
Martin Ågren
René Scharfe