We just taught the relevant functions to respect the diffopt.file field,
to allow writing somewhere else than stdout. Let's make use of it.
Technically, we do not need to avoid that call in a builtin: we assume
that builtins (as opposed to library functions) are stand-alone programs
that may do with their (global) state. Yet, we want to be able to reuse
that code in properly lib-ified code, e.g. when converting scripts into
builtins.
Further, while we did not *have* to touch the cmd_show() and cmd_cherry()
code paths (because they do not want to write anywhere but stdout as of
yet), it just makes sense to be consistent, making it easier and safer to
move the code later.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --color=auto handling is done by seeing if file descriptor 1
(the standard output) is connected to a terminal. format-patch
used freopen() to reuse the standard output stream even when sending
its output to an on-disk file, and this check is appropriate.
In the next step, however, we will stop reusing "FILE *stdout", and
instead start using arbitrary file descriptor obtained by doing an
fopen(3) ourselves. The check --color=auto does will become useless,
as we no longer are writing to the standard output stream.
But then, we do not need to guess to begin with. As argued in the commit
message of 7787570c (format-patch: ignore ui.color, 2011-09-13), we do not
allow the ui.color setting to affect format-patch's output. The only time,
therefore, that we allow color sequences to be written to the output files
is when the user specified the --color=always command-line option explicitly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are about to teach the log-tree machinery to reuse the diffopt.file
field to output to a file stream other than stdout, in line with the
diff machinery already writing to diffopt.file.
However, we might want to write something after the diff in
log_tree_commit() (e.g. with the --show-linear-break option), therefore
we must not let the diff machinery close the file (as per
diffopt.close_file.
This means that log_tree_commit() itself must override the
diffopt.close_file flag and close the file, and if log_tree_commit() is
called in a loop, the caller is responsible to do the same.
Note: format-patch has an `--output-directory` option. Due to the fact
that format-patch's options are parsed first, and that the parse-options
machinery accepts uniquely abbreviated options, the diff options
`--output` (and `-o`) are shadowed. Therefore close_file is not set to 1
so that cmd_format_patch() does *not* need to handle the close_file flag
differently, even if it calls log_tree_commit() in a loop.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learned a new "--base" option to record what
(public, well-known) commit the original series was built on in
its output.
* xy/format-patch-base:
format-patch: introduce format.useAutoBase configuration
format-patch: introduce --base=auto option
format-patch: add '--base' option to record base tree info
patch-ids: make commit_patch_id() a public helper function
This allows to record the base commit automatically, it is equivalent
to set --base=auto in cmdline.
The format.useAutoBase has lower priority than command line option,
so if user set format.useAutoBase and pass the command line option in
the meantime, base_commit will be the one passed to command line
option.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce --base=auto to record the base commit info automatically, the
base_commit will be the merge base of tip commit of the upstream branch
and revision-range specified in cmdline.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Maintainers or third party testers may want to know the exact base tree
the patch series applies to. Teach git format-patch a '--base' option
to record the base tree info and append it at the end of the first
message (either the cover letter or the first patch in the series).
The base tree info consists of the "base commit", which is a well-known
commit that is part of the stable part of the project history everybody
else works off of, and zero or more "prerequisite patches", which are
well-known patches in flight that is not yet part of the "base commit"
that need to be applied on top of "base commit" in topological order
before the patches can be applied.
The "base commit" is shown as "base-commit: " followed by the 40-hex of
the commit object name. A "prerequisite patch" is shown as
"prerequisite-patch-id: " followed by the 40-hex "patch id", which can
be obtained by passing the patch through the "git patch-id --stable"
command.
Imagine that on top of the public commit P, you applied well-known
patches X, Y and Z from somebody else, and then built your three-patch
series A, B, C, the history would be like:
---P---X---Y---Z---A---B---C
With "git format-patch --base=P -3 C" (or variants thereof, e.g. with
"--cover-letter" of using "Z..C" instead of "-3 C" to specify the
range), the base tree information block is shown at the end of the
first message the command outputs (either the first patch, or the
cover letter), like this:
base-commit: P
prerequisite-patch-id: X
prerequisite-patch-id: Y
prerequisite-patch-id: Z
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git log" shows the log message indented by 4-spaces, the
remainder of a line after a HT does not align in the way the author
originally intended. The command now expands tabs by default in
such a case, and allows the users to override it with a new option,
'--no-expand-tabs'.
* lt/pretty-expand-tabs:
pretty: test --expand-tabs
pretty: allow tweaking tabwidth in --expand-tabs
pretty: enable --expand-tabs by default for selected pretty formats
pretty: expand tabs in indented logs to make things line up properly
"git log --pretty={medium,full,fuller}" and "git log" by default
prepend 4 spaces to the log message, so it makes sense to enable
the new "expand-tabs" facility by default for these formats.
Add --no-expand-tabs option to override the new default.
The change alone breaks a test in t4201 that runs "git shortlog"
on the output from "git log", and expects that the output from
"git log" does not do such a tab expansion. Adjust the test to
explicitly disable expand-tabs with --no-expand-tabs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename detection is a very convenient feature, and new users shouldn't
have to dig in the documentation to benefit from it.
Potential objections to activating rename detection are that it
sometimes fail, and it is sometimes slow. But rename detection is
already activated by default in several cases like "git status" and "git
merge", so activating diff.renames does not fundamentally change the
situation. When the rename detection fails, it now fails consistently
between "git diff" and "git status".
This setting does not affect plumbing commands, hence well-written
scripts will not be affected.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is currently a wrapper around init_grep_defaults(), but will allow
adding more initialization in further patches.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can pass -o/--output-directory to the format-patch command to store
patches in some place other than the working directory. This patch
introduces format.outputDirectory configuration option for same
purpose.
The case of usage of this configuration option can be convenience
to not pass every time -o/--output-directory if an user has pattern
to store all patches in the /patches directory for example.
The format.outputDirectory has lower priority than command line
option, so if user will set format.outputDirectory and pass the
command line option, a result will be stored in a directory that
passed to command line option.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Oftentimes, patches created by git format-patch will be stored in
version control or compared with diff. In these cases, two otherwise
identical patches can have different commit hashes, leading to diff
noise. Teach git format-patch a --zero-commit option that instead
produces an all-zero hash to avoid this diff noise.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Convert most instances where the sha1 member of struct object is
dereferenced to use get_object_hash. Most instances that are passed to
functions that have versions taking struct object_id, such as
get_sha1_hex/get_oid_hex, or instances that can be trivially converted
to use struct object_id instead, are not converted.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
When working with paths in strbufs, we frequently want to
ensure that a directory contains a trailing slash before
appending to it. We can shorten this code (and make the
intent more obvious) by calling strbuf_complete.
Most of these cases are trivially identical conversions, but
there are two things to note:
- in a few cases we did not check that the strbuf is
non-empty (which would lead to an out-of-bounds memory
access). These were generally not triggerable in
practice, either from earlier assertions, or typically
because we would have just fed the strbuf to opendir(),
which would choke on an empty path.
- in a few cases we indexed the buffer with "original_len"
or similar, rather than the current sb->len, and it is
not immediately obvious from the diff that they are the
same. In all of these cases, I manually verified that
the strbuf does not change between the assignment and
the strbuf_complete call.
This does not convert cases which look like:
if (sb->len && !is_dir_sep(sb->buf[sb->len - 1]))
strbuf_addch(sb, '/');
as those are obviously semantically different. Some of these
cases arguably should be doing that, but that is out of
scope for this change, which aims purely for cleanup with no
behavior change (and at least it will make such sites easier
to find and examine in the future, as we can grep for
strbuf_complete).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We defaulted to ignoring merge diffs because long long ago, in a
galaxy far away, we didn't have a great way to show the diffs. The
whole "--cc" option goes back to January '06 and commit d8f4790e6f
("diff-tree --cc: denser combined diff output for a merge commit").
And before that option - so for about 8 months - we had no good way
to show the diffs of merges in a good dense way. So the whole
"don't show diffs for merges by default" actually made a lot of
sense originally, because our merge diffs were not very useful.
And this was carried forward to this day. "git log --cc" still
ignores merge commits, and you need to say "git log -m --cc" to view
a sensible rendition of merge and non-merge commits, even with the
previous change to make "--cc" imply "-p".
Teach "git log" that "--cc" means the user wants to see interesting
changes in merge commits by turning "-m" on.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--cc" option to "git log" is clearly a request to show some
sort of combined diff (be it --patch or --raw), but traditionally
we required the command line to explicitly ask for "git log -p --cc".
Teach the command line parser to treat a lone "--cc" as if the user
specified "-p --cc". Formats that do ask for other forms of diff
output, e.g. "log --raw --cc", are not overriden.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The revision walking API allows the callers to tweak its
configuration at the last minute, immediately after all the revision
and pathspec parameters are parsed from the command line but before
the default actions are decided based on them, by defining a "tweak"
callback function when calling setup_revisions(). Traditionally,
this facility was used by "git show" to turn on the patch output
"-p" by default when no diff output option (e.g. "--raw" or "-s" to
squelch the output altogether) is given on the command line, and
further give dense combined diffs "--cc" for merge commits when no
option to countermand it (e.g. "-m" to show pairwise patches).
Recently, "git log" started using the same facility, but we named
the callback function "default_follow_tweak()", as if the only kind
of tweaking we would want for "git log" will forever be limited to
turning "--follow" on by default when told by a configuration
variable. That was myopic.
Rename it to more generic name "log_setup_revisions_tweak()", and
match the one used by show "show_setup_revisions_tweak()".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git log" and friends a new "--date=format:..." option to
format timestamps using system's strftime(3).
* jk/date-mode-format:
strbuf: make strbuf_addftime more robust
introduce "format" date-mode
convert "enum date_mode" into a struct
show-branch: use DATE_RELATIVE instead of magic number
Add a new configuration variable to enable "--follow" automatically
when "git log" is run with one pathspec argument.
* dt/log-follow-config:
log: add "log.follow" configuration variable
Clean up refs API and make "git clone" less intimate with the
implementation detail.
* mh/init-delete-refs-api:
delete_ref(): use the usual convention for old_sha1
cmd_update_ref(): make logic more straightforward
update_ref(): don't read old reference value before delete
check_branch_commit(): make first parameter const
refs.h: add some parameter names to function declarations
refs: move the remaining ref module declarations to refs.h
initial_ref_transaction_commit(): check for ref D/F conflicts
initial_ref_transaction_commit(): check for duplicate refs
refs: remove some functions from the module's public interface
initial_ref_transaction_commit(): function for initial ref creation
repack_without_refs(): make function private
prune_refs(): use delete_refs()
prune_remote(): use delete_refs()
delete_refs(): bail early if the packed-refs file cannot be rewritten
delete_refs(): make error message more generic
delete_refs(): new function for the refs API
delete_ref(): handle special case more explicitly
remove_branches(): remove temporary
delete_ref(): move declaration to refs.h
People who work on projects with mostly linear history with frequent
whole file renames may want to always use "git log --follow" when
inspecting the life of the content that live in a single path.
Teach the command to behave as if "--follow" was given from the
command line when log.follow configuration variable is set *and*
there is one (and only one) path on the command line.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for adding date modes that may carry extra
information beyond the mode itself, this patch converts the
date_mode enum into a struct.
Most of the conversion is fairly straightforward; we pass
the struct as a pointer and dereference the type field where
necessary. Locations that declare a date_mode can use a "{}"
constructor. However, the tricky case is where we use the
enum labels as constants, like:
show_date(t, tz, DATE_NORMAL);
Ideally we could say:
show_date(t, tz, &{ DATE_NORMAL });
but of course C does not allow that. Likewise, we cannot
cast the constant to a struct, because we need to pass an
actual address. Our options are basically:
1. Manually add a "struct date_mode d = { DATE_NORMAL }"
definition to each caller, and pass "&d". This makes
the callers uglier, because they sometimes do not even
have their own scope (e.g., they are inside a switch
statement).
2. Provide a pre-made global "date_normal" struct that can
be passed by address. We'd also need "date_rfc2822",
"date_iso8601", and so forth. But at least the ugliness
is defined in one place.
3. Provide a wrapper that generates the correct struct on
the fly. The big downside is that we end up pointing to
a single global, which makes our wrapper non-reentrant.
But show_date is already not reentrant, so it does not
matter.
This patch implements 3, along with a minor macro to keep
the size of the callers sane.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch --ignore-if-upstream A..B" did not like to be fed
tags as boundary commits.
* jc/do-not-feed-tags-to-clear-commit-marks:
format-patch: do not feed tags to clear_commit_marks()
Some functions from the refs module were still declared in cache.h.
Move them to refs.h.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce <branch>@{push} short-hand to denote the remote-tracking
branch that tracks the branch at the remote the <branch> would be
pushed to.
* jk/at-push-sha1:
for-each-ref: accept "%(push)" format
for-each-ref: use skip_prefix instead of starts_with
sha1_name: implement @{push} shorthand
sha1_name: refactor interpret_upstream_mark
sha1_name: refactor upstream_mark
remote.c: add branch_get_push
remote.c: return upstream name from stat_tracking_info
remote.c: untangle error logic in branch_get_upstream
remote.c: report specific errors from branch_get_upstream
remote.c: introduce branch_get_upstream helper
remote.c: hoist read_config into remote_get_1
remote.c: provide per-branch pushremote name
remote.c: hoist branch.*.remote lookup out of remote_get_1
remote.c: drop "remote" pointer from "struct branch"
remote.c: refactor setup of branch->merge list
remote.c: drop default_remote_name variable
"git format-patch --ignore-if-in-upstream A..B", when either A or B
is a tag, failed miserably.
This is because the code passes the tips it used for traversal to
clear_commit_marks(), after running a temporary revision traversal
to enumerate the commits on both branches to find if they have
commits that make equivalent changes. The revision traversal
machinery knows how to enumerate commits reachable starting from a
tag, but clear_commit_marks() wants to take nothing but a commit.
In the longer term, it might be a more correct fix to teach
clear_commit_marks() to do the same "committish to commit"
dereferencing that is done in the revision traversal machinery,
but for now this fix should suffice.
Reported-by: Bruce Korb <bruce.korb@gmail.com>
Helped-by: Christian Couder <christian.couder@gmail.com>
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the previous commit introduced the branch_get_upstream
helper, there was one call-site that could not be converted:
the one in sha1_name.c, which gives detailed error messages
for each possible failure.
Let's teach the helper to optionally report these specific
errors. This lets us convert another callsite, and means we
can use the helper in other locations that want to give the
same error messages.
The logic and error messages come straight from sha1_name.c,
with the exception that we start each error with a lowercase
letter, as is our usual style (note that a few tests need
updated as a result).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the information needed to find the @{upstream} of a
branch is included in the branch struct, but callers have to
navigate a series of possible-NULL values to get there.
Let's wrap that logic up in an easy-to-read helper.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, 9c9b4f2f (standardize usage info string format, 2015-01-13)
tried to make usage-string in line with the documentation by
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
but it missed a few places.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Setting diff.submodule to 'log' made "git format-patch" produce
broken patches.
* dk/format-patch-ignore-diff-submodule:
format-patch: ignore diff.submodule setting
t4255: test am submodule with diff.submodule
This patch puts the usage info strings that were not already in docopt-
like format into docopt-like format, which will be a litle easier for
end users and a lot easier for translators. Changes include:
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.submodule when set to log produces output which git-am cannot
handle. Ignore this setting when generating patch output.
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parse_options API expects an array of alternative usage lines
to which it automatically ads the language-appropriate "or" when
displaying. Each of these options is marked for translation with N_
and then later translated when gettext is called on each element
of the array.
Since the N_ macro just expands to its argument, if two N_-marked
strings appear next to each other without being separated by anything
else such as a comma, the preprocessor will join them into one string.
In that case two separate strings get marked for translation, but at
runtime they have been joined into a single string passed to gettext
which then fails to get translated because the combined string was
never marked for translation.
Fix this by properly separating the two N_ marked strings with
a comma and removing the embedded "\n" and " or:" that are
properly supplied by the parse_options API.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows the callback to use 'base' as a temporary buffer to
quickly assemble full path "without" extra allocation. The callback
has to restore it afterwards of course.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The API to update refs have been restructured to allow introducing
a true transactional updates later. We would even allow storing
refs in backends other than the traditional filesystem-based one.
* rs/ref-transaction: (25 commits)
ref_transaction_commit: bail out on failure to remove a ref
lockfile: remove unable_to_lock_error
refs.c: do not permit err == NULL
remote rm/prune: print a message when writing packed-refs fails
for-each-ref: skip and warn about broken ref names
refs.c: allow listing and deleting badly named refs
test: put tests for handling of bad ref names in one place
packed-ref cache: forbid dot-components in refnames
branch -d: simplify by using RESOLVE_REF_READING
branch -d: avoid repeated symref resolution
reflog test: test interaction with detached HEAD
refs.c: change resolve_ref_unsafe reading argument to be a flags field
refs.c: make write_ref_sha1 static
fetch.c: change s_update_ref to use a ref transaction
refs.c: ref_transaction_commit: distinguish name conflicts from other errors
refs.c: pass a list of names to skip to is_refname_available
refs.c: call lock_ref_sha1_basic directly from commit
refs.c: refuse to lock badly named refs in lock_ref_sha1_basic
rename_ref: don't ask read_ref_full where the ref came from
refs.c: pass the ref log message to _create/delete/update instead of _commit
...
resolve_ref_unsafe takes a boolean argument for reading (a nonexistent ref
resolves successfully for writing but not for reading). Change this to be
a flags field instead, and pass the new constant RESOLVE_REF_READING when
we want this behaviour.
While at it, swap two of the arguments in the function to put output
arguments at the end. As a nice side effect, this ensures that we can
catch callers that were unaware of the new API so they can be audited.
Give the wrapper functions resolve_refdup and read_ref_full the same
treatment for consistency.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many config-parsing helpers, like parse_branch_color_slot,
take the name of a config variable and an offset to the
"slot" name (e.g., "color.branch.plain" is passed along with
"13" to effectively pass "plain"). This is leftover from the
time that these functions would die() on error, and would
want the full variable name for error reporting.
These days they do not use the full variable name at all.
Passing a single pointer to the slot name is more natural,
and lets us more easily adjust the callers to use skip_prefix
to avoid manually writing offset numbers.
This is effectively a continuation of 9e1a5eb, which did the
same for parse_diff_color_slot. This patch covers all of the
remaining similar constructs.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continue where ae021d87 (use skip_prefix to avoid magic numbers) left off
and use skip_prefix() in more places for determining the lengths of prefix
strings to avoid using dependent constants and other indirect methods.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin
Junio C Hamano
Xiaolong Ye
Matthieu Moy
Alexander Kuleshov
brian m. carlson
Jeff King
David Turner
Michael Haggerty
Alex Henrie
Doug Kelly
Kyle J. McKay
Nguyễn Thái Ngọc Duy
Ronnie Sahlberg
Jonathan Nieder
René Scharfe
Matthias Ruester