"git cat-file --batch" reported a dangling symbolic link by
mistake, when it wanted to report that a given name is ambiguous.
* dt/cat-file-batch-ambiguous:
t1512: test ambiguous cat-file --batch and --batch-output
Do not print 'dangling' for cat-file in case of ambiguity
The code to walk tree objects has been taught that we may be
working with object names that are not computed with SHA-1.
* bc/tree-walk-oid:
cache: make oidcpy always copy GIT_MAX_RAWSZ bytes
tree-walk: store object_id in a separate member
match-trees: use hashcpy to splice trees
match-trees: compute buffer offset correctly when splicing
tree-walk: copy object ID before use
The return values -1 and -2 from get_oid could mean two different
things, depending on whether they were from an enum returned by
get_tree_entry_follow_symlinks, or from a different code path. This
caused 'dangling' to be printed from a git cat-file in the case of an
ambiguous (-2) result.
Unify the results of get_oid* and get_tree_entry_follow_symlinks to be
one common type, with unambiguous values.
Signed-off-by: David Turner <novalis@novalis.org>
Reported-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing a tree, we read the object ID directly out of the tree
buffer. This is normally fine, but such an object ID cannot be used with
oidcpy, which copies GIT_MAX_RAWSZ bytes, because if we are using SHA-1,
there may not be that many bytes to copy.
Instead, store the object ID in a separate struct member. Since we can
no longer efficiently compute the path length, store that information as
well in struct name_entry. Ensure we only copy the object ID into the
new buffer if the path length is nonzero, as some callers will pass us
an empty path with no object ID following it, and we will not want to
read past the end of the buffer.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to support :(attr) when matching pathspec on a tree,
tree_entry_interesting() needs to take an index (because
git_check_attr() needs it). This is the preparation step for it. This
also makes it clearer what index we fall back to when looking up
attributes during an unpack-trees operation: the source index.
This also fixes revs->pruning.repo initialization that should have
been done in 2abf350385 (revision.c: remove implicit dependency on
the_index - 2018-09-21). Without it, skip_uninteresting() will
dereference a NULL pointer through this call chain
get_revision(revs)
get_revision_internal
get_revision_1
try_to_simplify_commit
rev_compare_tree
diff_tree_oid(..., &revs->pruning)
ll_diff_tree_oid
diff_tree_paths
ll_diff_tree
skip_uninteresting
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I looped over the toplevel header files, creating a temporary two-line C
program for each consisting of
#include "git-compat-util.h"
#include $HEADER
This patch is the result of manually fixing errors in compiling those
tiny programs.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the only caller of this function already uses struct object_id,
update get_tree_entry_follow_symlinks to use it in parameters and
internally.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert get_tree_entry and find_tree_entry to take pointers to struct
object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All callers of fill_tree_descriptor() have been converted to object_id
already, so convert that function as well. As a nice side-effect we get
rid of NULL checks in tree-diff.c, as fill_tree_descriptor() already
does them for us.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of dying when fsck hits a malformed tree object, log the error
like any other and continue. Now fsck can tell the user which tree is
bad, too.
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In traverse_trees, we generate the complete traverse path for a
traverse_info. Later, in do_compare_entry, we used to go do a bunch
of work to compare the traverse_info to a cache_entry's name without
computing that path. But since we already have that path, we don't
need to do all that work. Instead, we can just put the generated
path into the traverse_info, and do the comparison more directly.
We copy the path because prune_traversal might mutate `base`. This
doesn't happen in any codepaths where do_compare_entry is called,
but it's better to be safe.
This makes git checkout much faster -- about 25% on Twitter's
monorepo. Deeper directory trees are likely to benefit more than
shallower ones.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new function, get_tree_entry_follow_symlinks, to tree-walk.[ch].
The function is not yet used. It will be used to implement git
cat-file --batch --follow-symlinks.
The function locates an object by path, following symlinks in the
repository. If the symlinks lead outside the repository, the function
reports this to the caller.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This continues 4651ece8 (Switch over tree descriptors to contain a
pre-parsed entry) and moves the only rest computational part
mode = canon_mode(mode)
from tree_entry_extract() to tree entry decode phase - to
decode_tree_entry().
The reason to do it, is that canon_mode() is at least 2 conditional
jumps for regular files, and that could be noticeable should canon_mode()
be invoked several times.
That does not matter for current Git codebase, where typical tree
traversal is
while (t->size) {
sha1 = tree_entry_extract(t, &path, &mode);
...
update_tree_entry(t);
}
i.e. we do t -> sha1,path.mode "extraction" only once per entry. In such
cases, it does not matter performance-wise, where that mode
canonicalization is done - either once in tree_entry_extract(), or once
in decode_tree_entry() called by update_tree_entry() - it is
approximately the same.
But for future code, which could need to work with several tree_desc's
in parallel, it could be handy to operate on tree_desc descriptors, and
do "extracts" only when needed, or at all, access only relevant part of
it through structure fields directly.
And for such situations, having canon_mode() be done once in decode
phase is better - we won't need to pay the performance price of 2 extra
conditional jumps on every t->mode access.
So let's move mode canonicalization to decode_tree_entry(). That was the
final bit. Now after tree entry is decoded, it is fully ready and could
be accessed either directly via field, or through tree_entry_extract()
which this time got really "totally trivial".
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If o->merge is set, the struct traverse_info member conflicts is shifted
left in unpack_callback, then passed through traverse_trees_recursive
to unpack_nondirectories, where it is shifted right before use. Stop
the shifting and just pass the conflict bit mask as is. Rename the
member to df_conflicts to prove that it isn't used anywhere else.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a basic code hygiene to avoid magic constants that are unnamed.
Besides, this helps extending the value later on for "interesting, but
cannot decide if the entry truely matches yet" (ie. prefix matches)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tree_entry_len() does not simply take two random arguments and return
a tree length. The two pointers must point to a tree item structure,
or struct name_entry. Passing random pointers will return incorrect
value.
Force callers to pass struct name_entry instead of two pointers (with
hope that they don't manually construct struct name_entry themselves)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The traverse_trees() machinery is primarily meant for merging two (or
more) trees, and because a merge is a full tree operation, it doesn't
support any pruning with pathspec.
Since d1f2d7e (Make run_diff_index() use unpack_trees(), not read_tree(),
2008-01-19), however, we use unpack_trees() to traverse_trees() callchain
to perform "diff-index", which could waste a lot of work traversing trees
outside the user-supplied pathspec, only to discard at the blob comparison
level in diff-lib.c::oneway_diff() which is way too late.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
never_interesting optimization is disabled if there is any wildcard
pathspec, even if it only matches exactly on trees.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In traversing trees, a full path is splitted into two parts: base
directory and entry. They are however quite often concatenated
whenever a full path is needed. Current code allocates a new buffer,
do two memcpy(), use it, then release.
Instead this patch turns "base" to a writable, extendable buffer. When
a concatenation is needed, the callee only needs to append "entry" to
base, use it, then truncate the entry out again. "base" must remain
unchanged before and after entering a function.
This avoids quite a bit of malloc() and memcpy().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was a code comment that referred to the "above two functions" but
over time the functions immediately preceding the comment have changed.
Just mention the relevant functions by name.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an error is encountered, it calls add_rejected_file() which either
- directly displays the error message and stops if in plumbing mode
(i.e. if show_all_errors is not initialized at 1)
- or stores it so that it will be displayed at the end with display_error_msgs(),
Storing the files by error type permits to have a list of files for
which there is the same error instead of having a serie of almost
identical errors.
As each bind_overlap error combines a file and an old file, a list cannot be
done, therefore, theses errors are not stored but directly displayed.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the traverse_trees() entry comparator routine use the more
relaxed form of name comparison that considers files and directories
with the same name identical.
We pass in a separate mask for just the directory entries, so that the
callback routine can decide (if it wants to) to only handle one or the
other type, but generally most (all?) users are expected to really want
to see the case of a name 'foo' showing up in one tree as a file and in
another as a directory at the same time.
In particular, moving 'unpack_trees()' over to use this tree traversal
mechanism requires this.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows the callback to return an error value, but it can also
specify which of the tree entries that it actually used up by returning
a positive mask value.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the calling convention a bit less obvious, but a lot more
flexible. Instead of allocating and extending a new 'base' string, we
just link the top-most name into a linked list of the 'info' structure
when traversing a subdirectory, and we can generate the basename by
following the list.
Perhaps even more importantly, the linked list of info structures also
gives us a place to naturally save off other information than just the
directory name.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we consider if a path has been totally rewritten, we did not
touch changes from symlinks to files or vice versa. But a change
that modifies even the type of a blob surely should count as a
complete rewrite.
While we are at it, modernise diffcore-break to be aware of gitlinks (we
do not want to touch them).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function mark_tree_uninteresting() assumed that the tree entries
are blob when they are not trees. This is not so. Since we do
not traverse into submodules (yet), the gitlinks should be ignored.
In general, we should try to start moving away from using the
"S_ISLNK()" like things for internal git state. It was a mistake to
just assume the numbers all were same across all systems in the first
place. This implementation converts to the "object_type", and then
uses a case statement.
Noticed by Ilari on IRC.
Test script taken from an earlier version by Dscho.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Luiz Fernando N. Capitulino noticed the one in tree-walk.h where
we cast away constness while computing the legnth of a tree
entry.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 4651ece8 made the function a "static inline", it should
have removd the stale prototype but everybody missed that.
Thomas Glanzmann noticed this broke compilation with Forte12
compiler on his Sun boxes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes the tree descriptor contain a "struct name_entry" as part of
it, and it gets filled in so that it always contains a valid entry. On
some benchmarks, it improves performance by up to 15%.
That makes tree entry "extract" trivial, and means that we only actually
need to decode each tree entry just once: we decode the first one when
we initialize the tree descriptor, and each subsequent one when doing
"update_tree_entry()". In particular, this means that we don't need to
do strlen() both at extract time _and_ at update time.
Finally, it also allows more sharing of code (entry_extract(), that
wanted a "struct name_entry", just got totally trivial, along with the
"tree_entry()" function).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This removes slightly more lines than it adds, but the real reason for
doing this is that future optimizations will require more setup of the
tree descriptor, and so we want to do it in one place.
Also renamed the "desc.buf" field to "desc.buffer" just to trigger
compiler errors for old-style manual initializations, making sure I
didn't miss anything.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since we have the "tree_entry_len()" helper function these days, and
don't need to do a full strlen(), there's no point in saving the path
length - it's just redundant information.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a micro-optimization that grew out of the mailing list discussion
about "strlen()" showing up in profiles.
We used to pass regular C strings around to the low-level tree walking
routines, and while this worked fine, it meant that we needed to call
strlen() on strings that the caller always actually knew the size of
anyway.
So pass the length of the string down wih the string, and avoid
unnecessary calls to strlen(). Also, when extracting a pathname from a
tree entry, use "tree_entry_len()" instead of strlen(), since the length
of the pathname is directly calculable from the decoded tree entry itself
without having to actually do another strlen().
This shaves off another ~5-10% from some loads that are very tree
intensive (notably doing commit filtering by a pathspec).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>"
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a "tree_entry()" function that combines the common operation of
doing a "tree_entry_extract()" + "update_tree_entry()".
It also has a simplified calling convention, designed for simple loops
that traverse over a whole tree: the arguments are pointers to the tree
descriptor and a name_entry structure to fill in, and it returns a boolean
"true" if there was an entry left to be gotten in the tree.
This allows tree traversal with
struct tree_desc desc;
struct name_entry entry;
desc.buf = tree->buffer;
desc.size = tree->size;
while (tree_entry(&desc, &entry) {
... use "entry.{path, sha1, mode, pathlen}" ...
}
which is not only shorter than writing it out in full, it's hopefully less
error prone too.
[ It's actually a tad faster too - we don't need to recalculate the entry
pathlength in both extract and update, but need to do it only once.
Also, some callers can avoid doing a "strlen()" on the result, since
it's returned as part of the name_entry structure.
However, by now we're talking just 1% speedup on "git-rev-list --objects
--all", and we're definitely at the point where tree walking is no
longer the issue any more. ]
NOTE! Not everybody wants to use this new helper function, since some of
the tree walkers very much on purpose do the descriptor update separately
from the entry extraction. So the "extract + update" sequence still
remains as the core sequence, this is just a simplified interface.
We should probably add a silly two-line inline helper function for
initializing the descriptor from the "struct tree" too, just to cut down
on the noise from that common "desc" initializer.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Introduce tree-walk.[ch] and move "struct tree_desc" and
associated functions from various places.
Rename DIFF_FILE_CANON_MODE(mode) macro to canon_mode(mode) and
move it to cache.h. This macro returns the canonicalized
st_mode value in the host byte order for files, symlinks and
directories -- to be compared with a tree_desc entry.
create_ce_mode(mode) in cache.h is similar but is intended to be
used for index entries (so it does not work for directories) and
returns the value in the network byte order.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano
David Turner
brian m. carlson
Nguyễn Thái Ngọc Duy
Elijah Newren
René Scharfe
David Turner
David Turner
Kirill Smelkov
René Scharfe
Matthieu Moy
Linus Torvalds
Matthieu Castet
Linus Torvalds
Junio C Hamano