Граф коммитов

24 Коммитов

Автор SHA1 Сообщение Дата
Junio C Hamano 28b68216de Merge branch 'jc/check-attr-honor-working-tree'
"git check-attr" when (trying to) work on a repository with a
working tree did not work well when the working tree was specified
via --work-tree (and obviously with --git-dir).

The command also works in a bare repository but it reads from the
(possibly stale, irrelevant and/or nonexistent) index, which may
need to be fixed to read from HEAD, but that is a completely
separate issue.  As a related tangent to this separate issue, we
may want to also fix "check-ignore", which refuses to work in a
bare repository, to also operate in a bare one.

* jc/check-attr-honor-working-tree:
  check-attr: move to the top of working tree when in non-bare repository
  t0003: do not chdir the whole test process
2014-03-14 14:06:00 -07:00
Junio C Hamano cdbf623254 check-attr: move to the top of working tree when in non-bare repository
Lasse Makholm noticed that running "git check-attr" from a place
totally unrelated to $GIT_DIR and $GIT_WORK_TREE does not give
expected results.  I think it is because the command does not say it
wants to call setup_work_tree().

We still need to support use cases where only a bare repository is
involved, so unconditionally requiring a working tree would not work
well.  Instead, make a call only in a non-bare repository.

We may want to see if we want to do a similar fix in the opposite
direction to check-ignore.  The command unconditionally requires a
working tree, but it should be usable in a bare repository just like
check-attr attempts to be.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-06 10:19:33 -08:00
Junio C Hamano a86a8b9752 Merge branch 'sb/parseopt-boolean-removal'
Convert most uses of OPT_BOOLEAN/OPTION_BOOLEAN that can use
OPT_BOOL/OPTION_BOOLEAN which have much saner semantics, and turn
remaining ones into OPT_SET_INT, OPT_COUNTUP, etc. as necessary.

* sb/parseopt-boolean-removal:
  revert: use the OPT_CMDMODE for parsing, reducing code
  checkout-index: fix negations of even numbers of -n
  config parsing options: allow one flag multiple times
  hash-object: replace stdin parsing OPT_BOOLEAN by OPT_COUNTUP
  branch, commit, name-rev: ease up boolean conditions
  checkout: remove superfluous local variable
  log, format-patch: parsing uses OPT__QUIET
  Replace deprecated OPT_BOOLEAN by OPT_BOOL
  Remove deprecated OPTION_BOOLEAN for parsing arguments
2013-09-04 12:39:03 -07:00
Stefan Beller d5d09d4754 Replace deprecated OPT_BOOLEAN by OPT_BOOL
This task emerged from b04ba2bb (parse-options: deprecate OPT_BOOLEAN,
2011-09-27). All occurrences of the respective variables have
been reviewed and none of them relied on the counting up mechanism,
but all of them were using the variable as a true boolean.

This patch does not change semantics of any command intentionally.

Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-05 11:32:19 -07:00
Junio C Hamano f7cd8c50b9 check-attr -z: a single -z should apply to both input and output
Unless a command has separate --nul-terminated-{input,output}
options, the --nul-terminated-records (-z) option should apply
to both input and output for consistency.  The caller knows that its
input paths may need to be protected for LF, and the program shows
these problematic paths to its output.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-11 23:10:22 -07:00
Junio C Hamano 94a55e4e9f check-attr: the name of the character is NUL, not NULL
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-11 23:07:55 -07:00
Junio C Hamano b61f55be00 Merge branch 'maint'
* maint:
  t/perf: add "trash directory" to .gitignore
  Add missing -z to git check-attr usage text for consistency with man page
  git-jump: ignore (custom) prefix in diff mode
  Documentation: indent-with-non-tab uses "equivalent tabs" not 8
  completion: add --no-edit to git-commit
2012-09-17 15:59:34 -07:00
Adam Spiers d9fcff2f49 Add missing -z to git check-attr usage text for consistency with man page
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-17 13:45:32 -07:00
Nguyễn Thái Ngọc Duy 5a72beb791 i18n: check-attr: mark parseopt strings for translation
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-20 12:23:15 -07:00
Junio C Hamano a200dc8e62 Merge branch 'bc/attr-ignore-case'
* bc/attr-ignore-case:
  attr.c: respect core.ignorecase when matching attribute patterns
  attr: read core.attributesfile from git_default_core_config
  builtin/mv.c: plug miniscule memory leak
  cleanup: use internal memory allocation wrapper functions everywhere
  attr.c: avoid inappropriate access to strbuf "buf" member

Conflicts:
	transport-helper.c
2011-10-17 21:37:14 -07:00
Junio C Hamano 64589a03a8 attr: read core.attributesfile from git_default_core_config
This code calls git_config from a helper function to parse the config entry
it is interested in.  Calling git_config in this way may cause a problem if
the helper function can be called after a previous call to git_config by
another function since the second call to git_config may reset some
variable to the value in the config file which was previously overridden.

The above is not a problem in this case since the function passed to
git_config only parses one config entry and the variable it sets is not
assigned outside of the parsing function.  But a programmer who desires
all of the standard config options to be parsed may be tempted to modify
git_attr_config() so that it falls back to git_default_config() and then it
_would_ be vulnerable to the above described behavior.

So, move the call to git_config up into the top-level cmd_* function and
move the responsibility for parsing core.attributesfile into the main
config file parser.

Which is only the logical thing to do ;-)

Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-06 13:54:32 -07:00
Jay Soffian b2b3e9c2d6 Teach '--cached' option to check-attr
This option causes check-attr to consider .gitattributes only from
the index, ignoring .gitattributes from the working tree. This allows
the command to be used in situations where a working tree does not exist.

Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-22 16:38:22 -07:00
Michael Haggerty f5114a40c0 git-check-attr: Normalize paths
Normalize the path arguments (relative to the working tree root, if
applicable) before looking up their attributes.  This requires passing
the prefix down the call chain.

This fixes two test cases for different reasons:

* "unnormalized paths" is fixed because the .gitattribute-file-seeking
  code is not confused into reading the top-level file twice.

* "relative paths" is fixed because the canonical pathnames are passed
  to get_check_attr() or get_all_attrs(), allowing them to match the
  pathname patterns as expected.

Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04 15:57:18 -07:00
Michael Haggerty d932f4eb9f Rename git_checkattr() to git_check_attr()
Suggested by: Junio Hamano <gitster@pobox.com>

Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04 15:53:21 -07:00
Michael Haggerty ca64d061e0 git-check-attr: Fix command-line handling to match docs
According to the git-check-attr synopsis, if the '--stdin' option is
used then no pathnames are expected on the command line.  Change the
behavior to match this description; namely, if '--stdin' is used but
not '--', then treat all command-line arguments as attribute names.

Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04 15:53:20 -07:00
Michael Haggerty 4ca0f188f6 git-check-attr: Add an --all option to show all attributes
Add new usage patterns

    git check-attr [-a | --all] [--] pathname...
    git check-attr --stdin [-a | --all] < <list-of-paths>

which display all attributes associated with the specified file(s).

Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04 15:53:19 -07:00
Michael Haggerty fdf6be8259 git-check-attr: Error out if no pathnames are specified
If no pathnames are passed as command-line arguments and the --stdin
option is not specified, fail with the error message "No file
specified".  Add tests of this behavior.

Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04 15:53:19 -07:00
Michael Haggerty 72541040c3 git-check-attr: Process command-line args more systematically
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04 15:53:19 -07:00
Michael Haggerty 27937447ef git-check-attr: Handle each error separately
This will make the code easier to refactor.

Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04 15:53:19 -07:00
Michael Haggerty 9e37a7e126 git-check-attr: Extract a function error_with_usage()
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04 15:53:18 -07:00
Michael Haggerty d6541bb1ac git-check-attr: Introduce a new variable
Avoid reusing variable "doubledash" to mean something other than the
expected "position of a double-dash, if any".

Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04 15:53:18 -07:00
Michael Haggerty 46f96a6d8e git-check-attr: Extract a function output_attr()
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04 15:53:18 -07:00
Michael Haggerty 66a1fb3033 git-check-attr: Use git_attr_name()
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04 15:53:16 -07:00
Linus Torvalds 81b50f3ce4 Move 'builtin-*' into a 'builtin/' subdirectory
This shrinks the top-level directory a bit, and makes it much more
pleasant to use auto-completion on the thing. Instead of

	[torvalds@nehalem git]$ em buil<tab>
	Display all 180 possibilities? (y or n)
	[torvalds@nehalem git]$ em builtin-sh
	builtin-shortlog.c     builtin-show-branch.c  builtin-show-ref.c
	builtin-shortlog.o     builtin-show-branch.o  builtin-show-ref.o
	[torvalds@nehalem git]$ em builtin-shor<tab>
	builtin-shortlog.c  builtin-shortlog.o
	[torvalds@nehalem git]$ em builtin-shortlog.c

you get

	[torvalds@nehalem git]$ em buil<tab>		[type]
	builtin/   builtin.h
	[torvalds@nehalem git]$ em builtin		[auto-completes to]
	[torvalds@nehalem git]$ em builtin/sh<tab>	[type]
	shortlog.c     shortlog.o     show-branch.c  show-branch.o  show-ref.c     show-ref.o
	[torvalds@nehalem git]$ em builtin/sho		[auto-completes to]
	[torvalds@nehalem git]$ em builtin/shor<tab>	[type]
	shortlog.c  shortlog.o
	[torvalds@nehalem git]$ em builtin/shortlog.c

which doesn't seem all that different, but not having that annoying
break in "Display all 180 possibilities?" is quite a relief.

NOTE! If you do this in a clean tree (no object files etc), or using an
editor that has auto-completion rules that ignores '*.o' files, you
won't see that annoying 'Display all 180 possibilities?' message - it
will just show the choices instead.  I think bash has some cut-off
around 100 choices or something.

So the reason I see this is that I'm using an odd editory, and thus
don't have the rules to cut down on auto-completion.  But you can
simulate that by using 'ls' instead, or something similar.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-22 14:29:41 -08:00