All other error messages in the file use quotes around the file name.
This change removes two translations as "could not write to '%s'" and
"could not close '%s'" are already translated and these two are the only
occurrences without quotes.
Signed-off-by: Simon Ruderich <simon@ruderich.org>
[jc: adjusted tests I noticed were broken by the change]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value of write_in_full() is either "-1", or the
requested number of bytes[1]. If we make a partial write
before seeing an error, we still return -1, not a partial
value. This goes back to f6aa66cb95 (write_in_full: really
write in full or return error on disk full., 2007-01-11).
So checking anything except "was the return value negative"
is pointless. And there are a couple of reasons not to do
so:
1. It can do a funny signed/unsigned comparison. If your
"len" is signed (e.g., a size_t) then the compiler will
promote the "-1" to its unsigned variant.
This works out for "!= len" (unless you really were
trying to write the maximum size_t bytes), but is a
bug if you check "< len" (an example of which was fixed
recently in config.c).
We should avoid promoting the mental model that you
need to check the length at all, so that new sites are
not tempted to copy us.
2. Checking for a negative value is shorter to type,
especially when the length is an expression.
3. Linus says so. In d34cf19b89 (Clean up write_in_full()
users, 2007-01-11), right after the write_in_full()
semantics were changed, he wrote:
I really wish every "write_in_full()" user would just
check against "<0" now, but this fixes the nasty and
stupid ones.
Appeals to authority aside, this makes it clear that
writing it this way does not have an intentional
benefit. It's a historical curiosity that we never
bothered to clean up (and which was undoubtedly
cargo-culted into new sites).
So let's convert these obviously-correct cases (this
includes write_str_in_full(), which is just a wrapper for
write_in_full()).
[1] A careful reader may notice there is one way that
write_in_full() can return a different value. If we ask
write() to write N bytes and get a return value that is
_larger_ than N, we could return a larger total. But
besides the fact that this would imply a totally broken
version of write(), it would already invoke undefined
behavior. Our internal remaining counter is an unsigned
size_t, which means that subtracting too many byte will
wrap it around to a very large number. So we'll instantly
begin reading off the end of the buffer, trying to write
gigabytes (or petabytes) of data.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We often try to open a file for reading whose existence is
optional, and silently ignore errors from open/fopen; report such
errors if they are not due to missing files.
* nd/fopen-errors:
mingw_fopen: report ENOENT for invalid file names
mingw: verify that paths are not mistaken for remote nicknames
log: fix memory leak in open_next_file()
rerere.c: move error_errno() closer to the source system call
print errno when reporting a system call error
wrapper.c: make warn_on_inaccessible() static
wrapper.c: add and use fopen_or_warn()
wrapper.c: add and use warn_on_fopen_errors()
config.mak.uname: set FREAD_READS_DIRECTORIES for Darwin, too
config.mak.uname: set FREAD_READS_DIRECTORIES for Linux and FreeBSD
clone: use xfopen() instead of fopen()
use xfopen() in more places
git_fopen: fix a sparse 'not declared' warning
Our code often opens a path to an optional file, to work on its
contents when we can successfully open it. We can ignore a failure
to open if such an optional file does not exist, but we do want to
report a failure in opening for other reasons (e.g. we got an I/O
error, or the file is there, but we lack the permission to open).
The exact errors we need to ignore are ENOENT (obviously) and
ENOTDIR (less obvious). Instead of repeating comparison of errno
with these two constants, introduce a helper function to do so.
* jc/noent-notdir:
treewide: use is_missing_file_error() where ENOENT and ENOTDIR are checked
compat-util: is_missing_file_error()
Using the is_missing_file_error() helper introduced in the previous
step, update all hits from
$ git grep -e ENOENT --and -e ENOTDIR
There are codepaths that only check ENOENT, and it is possible that
some of them should be checking both. Updating them is kept out of
this step deliberately, as we do not want to change behaviour in this
step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the last patch, this function is not used outside anymore. Keep it
static.
Noticed-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fopen() returns NULL, it could be because the given path does not
exist, but it could also be some other errors and the caller has to
check. Add a wrapper so we don't have to repeat the same error check
everywhere.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In many places, Git warns about an inaccessible file after a fopen()
failed. To discern these cases from other cases where we want to warn
about inaccessible files, introduce a new helper specifically to test
whether fopen() failed because the current user lacks the permission to
open file in question.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gethostname(2) may not NUL terminate the buffer if hostname does
not fit; unfortunately there is no easy way to see if our buffer
was too small, but at least this will make sure we will not end up
using garbage past the end of the buffer.
* dt/xgethostname-nul-termination:
xgethostname: handle long hostnames
use HOST_NAME_MAX to size buffers for gethostname(2)
If the full hostname doesn't fit in the buffer supplied to
gethostname, POSIX does not specify whether the buffer will be
null-terminated, so to be safe, we should do it ourselves. Introduce
new function, xgethostname, which ensures that there is always a \0
at the end of the buffer.
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last call to the mkstemps() function was removed in commit 659488326
("wrapper.c: delete dead function git_mkstemps()", 22-04-2016). In order
to support platforms without mkstemps(), this functionality was provided,
along with a Makefile build variable (NO_MKSTEMPS), by the gitmkstemps()
function. Remove the dead code, along with the defunct build machinery.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last caller of git_mkstemp() was removed in commit 6fec0a89
("verify_signed_buffer: use tempfile object", 16-06-2016). Since
the introduction of the 'tempfile' APIs, along with git_mkstemp_mode,
it is unlikely that new callers will materialize. Remove the dead
code.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
General code clean-up around a helper function to write a
single-liner to a file.
* jk/write-file:
branch: use write_file_buf instead of write_file
use write_file_buf where applicable
write_file: add format attribute
write_file: add pointer+len variant
write_file: use xopen
write_file: drop "gently" form
branch: use non-gentle write_file for branch description
am: ignore return value of write_file()
config: fix bogus fd check when setting up default config
Fix recently introduced codepaths that are involved in parallel
submodule operations, which gave up on reading too early, and
could have wasted CPU while attempting to write under a corner
case condition.
* sb/submodule-parallel-fetch:
hoist out handle_nonblock function for xread and xwrite
xwrite: poll on non-blocking FDs
xread: retry after poll on EAGAIN/EWOULDBLOCK
At least for me, this improves the readability of xread and
xwrite; hopefully allowing missing "continue" statements to
be spotted more easily.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many callsites which could use write_file, but for
which it is a little awkward because they have a strbuf or
other pointer/len combo. Specifically:
1. write_file() takes a format string, so we have to use
"%s" or "%.*s", which are ugly.
2. Using any form of "%s" does not handle embedded NULs in
the output. That probably doesn't matter for our
call-sites, but it's nicer not to have to worry.
3. It's less efficient; we format into another strbuf
just to do the write. That's probably not measurably
slow for our uses, but it's simply inelegant.
We can fix this by providing a helper to write out the
formatted buffer, and just calling it from write_file().
Note that we don't do the usual "complete with a newline"
that write_file does. If the caller has their own buffer,
there's a reasonable chance they're doing something more
complicated than a single line, and they can call
strbuf_complete_line() themselves.
We could go even further and add strbuf_write_file(), but it
doesn't save much:
- write_file_buf(path, sb.buf, sb.len);
+ strbuf_write_file(&sb, path);
It would also be somewhat asymmetric with strbuf_read_file,
which actually returns errors rather than dying (and the
error handling is most of the benefit of write_file() in the
first place).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the code a tiny bit, and provides consistent
error messages with other users of xopen().
While we're here, let's also switch to using O_WRONLY. We
know we're only going to open/write/close the file, so
there's no point in asking for O_RDWR.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no callers left of write_file_gently(). Let's drop
it, as it doesn't seem likely for new callers to be added
(since its inception, the only callers who wanted the gentle
form generally just died immediately themselves, and have
since been converted).
While we're there, let's also drop the "int" return from
write_file, as it is never meaningful (in the non-gentle
form, we always either die or return 0).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write(2) can hit the same EAGAIN/EWOULDBLOCK errors as read(2),
so busy-looping on a non-blocking FD is a waste of resources.
Currently, I do not know of a way for this happen:
* the NonBlocking directive in systemd does not apply to stdin,
stdout, or stderr.
* xinetd provides no way to set the non-blocking flag at all
But theoretically, it's possible a careless C10K HTTP server
could use pipe2(..., O_NONBLOCK) to setup a pipe for
git-http-backend with only the intent to use non-blocking reads;
but accidentally leave non-blocking set on the write end passed
as stdout to git-upload-pack.
Followup-to: 1079c4be0b ("xread: poll on non blocking fds")
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should continue to loop after EAGAIN/EWOULDBLOCK as the
intent of xread is to try until there is available data,
EOF, or an unrecoverable error.
Fixes: 1079c4be0b ("xread: poll on non blocking fds")
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for warning_errno/die_errno has been refactored and a new
error_errno() reporting helper is introduced.
* nd/error-errno: (41 commits)
wrapper.c: use warning_errno()
vcs-svn: use error_errno()
upload-pack.c: use error_errno()
unpack-trees.c: use error_errno()
transport-helper.c: use error_errno()
sha1_file.c: use {error,die,warning}_errno()
server-info.c: use error_errno()
sequencer.c: use error_errno()
run-command.c: use error_errno()
rerere.c: use error_errno() and warning_errno()
reachable.c: use error_errno()
mailmap.c: use error_errno()
ident.c: use warning_errno()
http.c: use error_errno() and warning_errno()
grep.c: use error_errno()
gpg-interface.c: use error_errno()
fast-import.c: use error_errno()
entry.c: use error_errno()
editor.c: use error_errno()
diff-no-index.c: use error_errno()
...
Its last call site was replaced by mks_tempfile_ts() in 284098f (diff:
use tempfile module - 2015-08-12) and there's a good chance
mks_tempfile_ts will continue to successfully handle this job. Delete
it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update various codepaths to avoid manually-counted malloc().
* jk/tighten-alloc: (22 commits)
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
tree-diff: catch integer overflow in combine_diff_path allocation
...
REALLOC_ARRAY inherently involves a multiplication which can
overflow size_t, resulting in a much smaller buffer than we
think we've allocated. We can easily harden it by using
st_mult() to check for overflow. Likewise, we can add
ALLOC_ARRAY to do the same thing for xmalloc calls.
xcalloc() should already be fine, because it takes the two
factors separately, assuming the system calloc actually
checks for overflow. However, before we even hit the system
calloc(), we do our memory_limit_check, which involves a
multiplication. Let's check for overflow ourselves so that
this limit cannot be bypassed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some codepaths used fopen(3) when opening a fixed path in $GIT_DIR
(e.g. COMMIT_EDITMSG) that is meant to be left after the command is
done. This however did not work well if the repository is set to
be shared with core.sharedRepository and the umask of the previous
user is tighter. They have been made to work better by calling
unlink(2) and retrying after fopen(3) fails with EPERM.
* js/fopen-harder:
Handle more file writes correctly in shared repos
commit: allow editing the commit message even in shared repos
Some codepaths used fopen(3) when opening a fixed path in $GIT_DIR
(e.g. COMMIT_EDITMSG) that is meant to be left after the command is
done. This however did not work well if the repository is set to
be shared with core.sharedRepository and the umask of the previous
user is tighter. They have been made to work better by calling
unlink(2) and retrying after fopen(3) fails with EPERM.
* js/fopen-harder:
Handle more file writes correctly in shared repos
commit: allow editing the commit message even in shared repos
Add a framework to spawn a group of processes in parallel, and use
it to run "git fetch --recurse-submodules" in parallel.
Rerolled and this seems to be a lot cleaner. The merge of the
earlier one to 'next' has been reverted.
* sb/submodule-parallel-fetch:
submodules: allow parallel fetching, add tests and documentation
fetch_populated_submodules: use new parallel job processing
run-command: add an asynchronous parallel child processor
sigchain: add command to pop all common signals
strbuf: add strbuf_read_once to read without blocking
xread: poll on non blocking fds
submodule.c: write "Fetching submodule <foo>" to stderr
It was pointed out by Yaroslav Halchenko that the file containing the
commit message is writable only by the owner, which means that we have
to rewrite it from scratch in a shared repository.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When getpwuid() on the system returned NULL (e.g. the user is not
in the /etc/passwd file or other uid-to-name mappings), the
codepath to find who the user is to record it in the reflog barfed
and died. Loosen the check in this codepath, which already accepts
questionable ident string (e.g. host part of the e-mail address is
obviously bogus), and in general when we operate fmt_ident() function
in non-strict mode.
* jk/ident-loosen-getpwuid:
ident: loosen getpwuid error in non-strict mode
ident: keep a flag for bogus default_email
ident: make xgetpwuid_self() a static local helper
The man page of read(2) says:
EAGAIN The file descriptor fd refers to a file other than a socket
and has been marked nonblocking (O_NONBLOCK), and the read
would block.
EAGAIN or EWOULDBLOCK
The file descriptor fd refers to a socket and has been marked
nonblocking (O_NONBLOCK), and the read would block. POSIX.1-2001
allows either error to be returned for this case, and does not
require these constants to have the same value, so a portable
application should check for both possibilities.
If we get an EAGAIN or EWOULDBLOCK the fd must have set O_NONBLOCK.
As the intent of xread is to read as much as possible either until the
fd is EOF or an actual error occurs, we can ease the feeder of the fd
by not spinning the whole time, but rather wait for it politely by not
busy waiting.
We should not care if the call to poll failed, as we're in an infinite
loop and can only get out with the correct read().
Signed-off-by: Stefan Beller <sbeller@google.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is defined in wrapper.c, but nobody besides
ident.c uses it. And nobody is likely to in the future,
either, as anything that cares about the user's name should
be going through the ident code.
Moving it here is a cleanup of the global namespace, but it
will also enable further cleanups inside ident.c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a number of places in the code where we call
sprintf(), with the assumption that the output will fit into
the buffer. In many cases this is true (e.g., formatting a
number into a large buffer), but it is hard to tell
immediately from looking at the code. It would be nice if we
had some run-time check to make sure that our assumption is
correct (and to communicate to readers of the code that we
are not blindly calling sprintf, but have actually thought
about this case).
This patch introduces xsnprintf, which behaves just like
snprintf, except that it dies whenever the output is
truncated. This acts as a sort of assert() for these cases,
which can help find places where the assumption is violated
(as opposed to truncating and proceeding, which may just
silently give a wrong answer).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All existing callers to this function use it to produce a text file
or an empty file, and a new callsite that mimick them must end their
payload with a LF. If they forget to do so, the resulting file will
end with an incomplete line.
Teach write_file_v() to complete the incomplete line, if exists, so
that the callers do not have to.
With this, the caller-side fix in builtin/am.c becomes unnecessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All callers except three passed 1 for the "fatal" parameter to ask
this function to die upon error, but to a casual reader of the code,
it was not all obvious what that 1 meant. Instead, split the
function into two based on a common write_file_v() that takes the
flag, introduce write_file_gently() as a new way to attempt creating
a file without dying on error, and make three callers to call it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common usage pattern of fopen() is to check if it succeeded, and die()
if it failed:
FILE *fp = fopen(path, "w");
if (!fp)
die_errno(_("could not open '%s' for writing"), path);
Implement a wrapper function xfopen() for the above, so that we can save
a few lines of code and make the die() messages consistent.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common usage pattern of open() is to check if it was successful, and
die() if it was not:
int fd = open(path, O_WRONLY | O_CREAT, 0777);
if (fd < 0)
die_errno(_("Could not open '%s' for writing."), path);
Implement a wrapper function xopen() that does the above so that we can
save a few lines of code, and make the die() messages consistent.
Helped-by: Torsten Bögershausen <tboegi@web.de>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to use the new function elsewhere in a moment.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
Our default I/O size (8 MiB) for large files was too large for some
platforms with smaller SSIZE_MAX, leading to read(2)/write(2)
failures.
* jc/max-io-size-and-ssize-max:
xread/xwrite: clip MAX_IO_SIZE to SSIZE_MAX
Since 0b6806b9 (xread, xwrite: limit size of IO to 8MB, 2013-08-20),
we chomp our calls to read(2) and write(2) into chunks of
MAX_IO_SIZE bytes (8 MiB), because a large IO results in a bad
latency when the program needs to be killed. This also brought our
IO below SSIZE_MAX, which is a limit POSIX allows read(2) and
write(2) to fail when the IO size exceeds it, for OS X, where a
problem was originally reported.
However, there are other systems that define SSIZE_MAX smaller than
our default, and feeding 8 MiB to underlying read(2)/write(2) would
fail. Make sure we clip our calls to the lower limit as well.
Reported-by: Joachim Schmitz <jojo@schmitz-digital.de>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This behaves like unlink_or_warn except that on failure it writes the message
to its 'err' argument, which the caller can display in an appropriate way or
ignore.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the function warn_if_unremovable slightly. Additionally, change
behaviour slightly. If we failed to remove the object because the object
does not exist, we can still return success back to the caller since none of
the callers depend on "fail if the file did not exist".
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a required clean filter, we do not have to mmap the
original before feeding the filter. Instead, stream the file
contents directly to the filter and process its output.
* sp/stream-clean-filter:
sha1_file: don't convert off_t to size_t too early to avoid potential die()
convert: stream from fd to required clean filter to reduce used address space
copy_fd(): do not close the input file descriptor
mmap_limit: introduce GIT_MMAP_LIMIT to allow testing expected mmap size
memory_limit: use git_env_ulong() to parse GIT_ALLOC_LIMIT
config.c: add git_env_ulong() to parse environment variable
convert: drop arguments other than 'path' from would_convert_to_git()
Teach a few codepaths to punt (instead of dying) when large blobs
that would not fit in core are involved in the operation.
* nd/large-blobs:
diff: shortcut for diff'ing two binary SHA-1 objects
diff --stat: mark any file larger than core.bigfilethreshold binary
diff.c: allow to pass more flags to diff_populate_filespec
sha1_file.c: do not die failing to malloc in unpack_compressed_entry
wrapper.c: introduce gentle xmallocz that does not die()
GIT_ALLOC_LIMIT limits xmalloc()'s size, which is of type size_t.
Better use git_env_ulong() to parse the environment variable, so
that the postfixes 'k', 'm', and 'g' can be used; and use size_t to
store the limit for consistency. The change to size_t has no direct
practical impact, because the environment variable is only meant to
be used for our own tests, and we use it to test small sizes.
The cast of size in the call to die() is changed to uintmax_t to
match the format string PRIuMAX.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the helper function xgetcwd(), which returns the current directory
or dies. The returned string has to be free()d after use.
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simon Ruderich
Jeff King
Junio C Hamano
Brandon Williams
Nguyễn Thái Ngọc Duy
David Turner
Ramsay Jones
Eric Wong
Johannes Schindelin
Stefan Beller
Paul Tan
Johannes Sixt
Ronnie Sahlberg
Steffen Prohaska
René Scharfe